Systematic Development of Highly Efficient and Clean Engines to Meet Future Commercial Vehicle Greenhouse Gas Regulations

SAE International Journal of Engines

Volumn 6, Issue 3, 2013, Pages 1395-1480

  Stanton, Donald W ^a  

^a CUMMINS INC   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

CAPABILITY TO INNOVATE; EMISSIONS REGULATIONS; GREENHOUSE GAS REGULATION; GROSS DOMESTIC PRODUCTS; HEAVY-DUTY DIESEL ENGINE; REGULATORY REQUIREMENTS; TRANSPORTATION SECTOR; VEHICLE-MILES TRAVELED;

ACCIDENT PREVENTION; AUTOMOBILE MANUFACTURE; COMMERCIAL VEHICLES; DIESEL ENGINES; ECONOMICS; ENERGY EFFICIENCY; ENGINES; ENVIRONMENTAL IMPACT; FREIGHT TRANSPORTATION; FUEL CONSUMPTION; FUEL ECONOMY; FUELS; GREENHOUSE GASES; INDUSTRY; INTERNATIONAL TRADE; MACHINE DESIGN; PETROLEUM TRANSPORTATION; TRUCKS;

AUTOMOBILES;

EID: 84886619336     PISSN: 19463936     EISSN: 19463944     Source Type: Journal    
DOI: 10.4271/2013-01-2421     Document Type: Article

References (69)

1. U.S. Department of Energy, Report on the First Quadrennial Technology Review. Washington D.C., September 2011.
2. U.S. Department of Energy, Energy Information Administration. 2009b. Annual Energy Outlook 2009. Report No. DOE/EIADOE/EIA-0383(2009). Washington, D.C. March 2009.
3. U.S. Department of Energy, Energy Information Administration. Annual Energy Outlook 2012. Report No. DOE/EIA-0383(2012). Washington, D.C. June 2012.
4. U.S. Department of Energy, Energy Information Administration. July Monthly Energy Review. Washington, D.C. July 2011.
5. National Highway and Transpiration Safety Administration. Final Rule for CAFE Standards for Model Years 2017 and Beyond. August 2012. http://www.nhtsa.gov/fuel-economy.
6. Final Rule: Greenhouse Gas Emissions Standards and Fuel Efficiency Standards for Medium- and Heavy-Duty Engines and Vehicles - Environmental Protection Agency (EPA) and National Highway Traffic Safety Administration (NHTSA), August 9, 2011.
7. 21st Century Truck Partnership Roadmap and Technical Frameworks, 21CTP-0003, December 2006.
8. National Petroleum Council. Advancing Technology for America's Transportation Future. August 2012.
9. U.S Department of Commerce, Census Bureau. 2005 Economic Census, Industry Product Analysis. March. Washington D.C., 2005.
10. U.S. Department of Transportation, National Highway Traffic Safety Administration. 49 CFR 565.24, available at http://www.ecfr.gov/cgi-bin/.
11. TIAX, LLC. Assessment of Fuel Economy Technologies for Medium- and Heavy-Duty Vehicles, Final Report to the National Academy of Sciences, November 19, 2009.
12. U.S. Department of Energy, Energy Information Administration. Annual Energy Outlook 2008. Report No. DOE/EIA-0383(2008). Washington, D.C. June 2008.
13. Ward's Automotive Group, Motor Vehicle Facts and Figures 2011, MI, 2011. http://wardsauto.com.
14. Davis, S.C., Boundy, R.G., and Diegel, S.W. U.S. Department of Energy, Vehicle Technologies Market Report. Oak Ridge National Laboratories, February 2011.
15. Exxon Mobile Corporation. The Outlook for Energy: A View to 2040. August 2013. http://www.exxonmobil.com/Corporate/files/news_pub_eo.pdf.
16. Davis, S., and Diegel S. Transportation Energy Data Book Edition 26. Oak Ridge, Tenn.: Oak Ridge National Laboratory, 2007.
17. Fact Sheet: EPA and NHTSA Adopt First-Ever Program to Reduce Greenhouse Gas Emissions and Improve Fuel Efficiency of Medium- and Heavy-Duty Vehicles, EPA Office of Transportation and Air Quality, EPA-420-F-11-031, August 2011.
18. Rogers P.G., "The Clean Air Act of 1970", EPA Journal - January/February 1990.
19. Charlton, S. and Stanton, D. The regulation of greenhouse gas (GHG) emissions from commercial vehicles and HD diesel engines - meeting the new US regulations, 7th international Exhaust Gas and Particulate Emissions Forum, 2012.
20. Stanton, D. Highly Efficient and Clean Diesel Engine Technologies, Directions in Engine Efficiency Conference, Detroit, MI. 2009.
21. Stanton, D. Diesel Engine Combustion Technology for SuperTruck, Directions in Engine Efficiency Conference, Detroit, MI. 2010.
22. Environmental Protection Agency, 40 CFR Parts 69, 80, and 86, 'Control of Air Pollution from New Motor Vehicles: Heavy-Duty Engine and Vehicle Standards and Highway Diesel Fuel Sulfur Control Requirements', Final rule. http://www.epa.gov/fedrgstr/EPA-AIR/2001/January/Day-18/a01a.htm.
23. Committee to Assess Fuel Economy Technologies for Medium- and Heavy-Duty Vehicles, National Research Council, "Technologies and Approaches to Reducing the Fuel Consumption of Medium- and Heavy-Duty Vehicles." Washington, D.C., The National Academies Press. 2010.
24. Morita, K., Shimamura, K., Yamaguchi, S., Furumachi, K. et al., "Development of a Fuel Economy and Exhaust Emissions Test Method with HILS for Heavy-Duty HEVs," SAE Int. J. Engines 1(1):873-887, 2009, doi:10.4271/2008-01-1318.
25. Kim, N., Carlson, R., Jehlik, F., and Rousseau, A., "Tahoe HEV Model Development in PSAT," SAE Technical Paper 2009-01-1307, 2009, doi:10.4271/2009-01-1307.
26. Kim, N., Duoba, M., Kim, N., and Rousseau, A., "Validating Volt PHEV Model with Dynamometer Test Data Using Autonomie," SAE Int. J. Passeng. Cars - Mech. Syst. 6(2):985-992, 2013, doi:10.4271/2013-01-1458.
27. SmartWay Partnership http://www.epa.gov/smartway/.
28. Andreae, M., Salemme, G., Kumar, M., and Sun, Z., "Emissions Certification Vehicle Cycles Based on Heavy Duty Engine Test Cycles," SAE Int. J. Commer. Veh. 5(1):299-309, 2012, doi:10.4271/2012-01-0878.
29. Peer Review of the Greenhouse Gas Emissions Model (GEM) and EPA's Response to Comments, EPA-420-R-11-007, August 2011.
30. Dollmeyer, T., Vittorio, D., Grana, T., Katzenmeyer, J. et al., "Meeting the US 2007 Heavy-Duty Diesel Emission Standards - Designing for the Customer," SAE Technical Paper 2007-01-4170, 2007, doi:10.4271/2007-01-4170.
31. Charlton, S., Dollmeyer, T., and Grana, T., "Meeting the US Heavy-Duty EPA 2010 Standards and Providing Increased Value for the Customer," SAE Int. J. Commer. Veh. 3(l):101-110, 2010, doi:10.4271/2010-01-1934.
32. Stanton, D., Charlton, S., and Vajapeyazula, P., "Diesel Engine Technologies Enabling Powertrain Optimization to Meet U.S. Greenhouse Gas Emissions," SAE Int. J. Engines 6(3):in press, 2013, doi:10.4271/2013-24-0094.
33. Flynn, P., Durrett, R., Hunter, G., zur Loye, A. et al., "Diesel Combustion: An Integrated View Combining Laser Diagnostics, Chemical Kinetics, And Empirical Validation," SAE Technical Paper 1999-01-0509, 1999, doi:10.4271/1999-01-0509.
34. Caddy SJ, 'Variable Geometry Turbocharger Control', Patent Application, 1996.
35. Charlton, S., "Developing Diesel Engines to Meet Ultra-low Emission Standards," SAE Technical Paper 2005-01-3628, 2005, doi:10.4271/2005-01-3628.
36. Cummins, C.L, US Patent 1,561,913 "Oil Engine" (Mechanical Unit Injector), November 17, 1925.
37. Eichelbaum, M, Farrauto, RJ, Castaldi, MJ (BASF), "Urea-SCR for NOx Diesel Emission Control: The influence of urea and its decomposition products on the SCR activity of zeolites", Earth & Environmental Engineering (HKSM), Columbia University, New York, NY 10027.
38. Cooper, BJ, McDonald, AC, Walker, AP (JMI) and Sanchez, M (Cummins), The Development and On-Road Performance and Durability of the Four-Way Emission Control SCRTTM System, Proc. DEER August 23-28, 2003.
39. Fedeyko, J., Chen, H., Ballinger, T., Weigert, E. et al., "Development of Thermally Durable Cu/SCR Catalysts," SAE Technical Paper 2009-01-0899, 2009, doi:10.4271/2009-01-0899.
40. Dieterle, M, "SCR DeNOx Technologies to Meet Low Emission Standards," Presentation at SAE Light-Duty Diesel Emissions Control Symposium, November 3-5, 2008.
41. Narayanaswamy, K. and He, Y., "Modeling of Copper-Zeolite and Iron-Zeolite Selective Catalytic Reduction (SCR) Catalysts at Steady State and Transient Conditions," SAE Technical Paper 2008-01-0615, 2008, doi:10.4271/2008-01-0615.
42. Stanton, D., Integration of Diesel Engine Technology to Meet US EPA 2010 Emissions with Improved Thermal Efficiency, Diesel Engine Emission Reduction Conference, Detroit, MI. 2007.
43. Eckerle, W., Innovative Approaches to Improving Engine Efficiency, Diesel Engine Emission Reduction Conference, Detroit, MI. 2007.
44. Tow, T., Pierpont, D., and Reitz, R., "Reducing Particulate and NOx Emissions by Using Multiple Injections in a Heavy Duty D.I. Diesel Engine," SAE Technical Paper 940897, 1994, doi:10.4271/940897.
45. Heywood, J.B., Internal Combustion Engine Fundamentals, McGraw-Hill, 1988.
46. Primus, R., "Visual Thermodynamics: Processes in Log(p)-Log(T) Space," SAE Technical Paper 1999-01-0516, 1999, doi:10.4271/1999-01-0516.
47. Watson, N. and Marzouk, M., "A Non-Linear Digital Simulation of Turbocharged Diesel Engines Under Transient Conditions," SAE Technical Paper 770123, 1977, doi:10.4271/770123.
48. Krieger, R. B. and Borman, G. L., "The Computation of Apparent Heat Release for Internal Combustion Engines", ASME Paper 66-WA/DGP-4, 1966.
49. JANAF Thermodynamical Tables, National Bureau of Standards Publication, NSRDS-NBS 37, 1971.
50. Ghojel, J. and Honnery, D., "Heat release model for the combustion of diesel oil emulsions in DI diesel engines," Applied Thermal Engineering, 2005, doi:10.1016.
51. Primus, et al. Proceedings of International Symposium on Diagnostics and Modeling of Combustion in Reciprocating Engines, p.529-538. 1985.
52. Edwards, et al. Realizing Ultra-High-Efficiency Engines: Understanding Limits and Overcoming Limitations, Global Climate and Energy Project Research Symposium, 2010.
53. Rakopoulos C. D. and Giakoumis E. G., "Second-law analysis applied to internal combustion engine operation," Progress in Energy and Combustion Science, 32, 2-47, 2006.
54. Lior N. and Rudy G. J., "Second-Law Analysis of an Ideal Otto Cycle," Energy Conversion and Management, 28(4), 327-334, 1988.
55. Creveling, C.M., Slutsky, J. L., and Antis, D.Jr., Design for Six Sigma in Technology and Product Development, Prentice Hall PTR, New Jersey, 2003.
56. Clarus Concept of Operations. Publication No. FHWA-JPO-05-072, Federal Highway Administration (FHWA), 2005.
57. Pugh, S., Clausing, D., and Andrade, R., Creating Innovative Products Using Total Design. Addison Wesley Longman, 1996.
58. Rausand, M. and Hoylan, A. System Reliability Theories, Models, Statistical Methods, and Applications, Wiley Series in probability and statistics - second edition, 2004.
59. Ido, T., Yoshimura, K., Kunieda, M., Tamura, Y. et al., "Volume Reduction of SCR Catalyst Using Zeolite-Base Honeycomb Substrate," SAE Int. J. Fuels Lubr. 3(1):614-624, 2010, doi:10.4271/2010-01-1170.
60. Ernst, P. and Fletcher, K., "SUMEBore - thermally sprayed protective coatings for cylinder liner surfaces," Sulzer, http://www.sulzer.com.
61. Eckhardt, L.A., "S3 Engines Study Group Meeting", Technology & Maintenance Council (TMC) of American Trucking Associations 2011 Fall Meeting, Sept. 19-22, Raleigh Convention Center, Raleigh, N.C., 2011. http://www.truckline.com/Federation/Councils/TMC/Documents/SuperTech11/TMC11F_S3Mi niTech.pdf.
62. Concentric variable flow oil and water pumps in US Supertruck, 2013. http://news.cision.com/concentric-ab/r/concentric-variable-flow-oil-and-water-pumps-in-us-supertruck,c9402426.
63. Chandra, S., "Waste Heat Recovery for Improved Efficiency," SAE Heavy Duty Vehicles Technology Symposium, September 2012.
64. Koeberlein, D., Supertruck technologies for 55% thermal efficiency and 68% freight efficiency, Directions in Engine Efficiency, Detroit, MI. 2012.
65. Hanson, R., Splitter, D., and Reitz, R., "Operating a Heavy-Duty Direct-Injection Compression-Ignition Engine with Gasoline for Low Emissions," SAE Technical Paper 2009-01-1442, 2009, doi:10.4271/2009-01-1442.
66. Hanson, R., Kokjohn, S., Splitter, D., and Reitz, R., "An Experimental Investigation of Fuel Reactivity Controlled PCCI Combustion in a Heavy-Duty Engine," SAE Int. J. Engines 3(1):700-716, 2010, doi:10.4271/2010-01-0864.
67. U.S. Department of Energy, Clean Cities Alternative Fuel Price Report, January 2013.
68. U.S. Energy Information Administration, 2013, http://www.eia.gov/cfapps/ipdbproject/IEDIndex3.cfm?tid=3&pid=3&aid=6.
69. Werpy et al., Natural Gas Vehicles: Status, Barriers, and Opportunities, Argonne National Laboratory, ANL/ESD/10-4, 2010.