Laser and photonic systems integration: Emerging innovations and framework for research and education

Human Factors and Ergonomics In Manufacturing

Volumn 23, Issue 6, 2013, Pages 483-516

  Nof, Shimon Y ^a   Cheng, Gary J ^a   Weiner, Andrew M ^a   Chen, Xin W ^b   Bechar, Avital ^c   Jones, Marshall G ^d   Reed, Claude B ^e   Donmez, Alkan ^f   Weldon, Thomas D ^g   Bermel, Peter ^a   Bukkapatnam, Satish T S ^h   Cheng, Changqing ^h   Kumara, Soundar R T ⁱ   Bement, Arden ^a   Koubek, Richard ^j   Bidanda, Bopaya ^k   Shin, Yung C ^a   Capponi, Agostino ^a   Lee, Seokcheon ^a   Lehto, Mark R ^a   Liu, Andrew L ^a   Nohadani, Omid ^a   Dantus, Marcos ^l   Lorraine, Peter W ^d   Nolte, David D ^a   Proctor, Robert W ^a   Sardesai, Harshad P ^m,n   Shi, Leyuan ^o   Wachs, Juan P ^a   Zhang, Xi Cheng ^p   more..

^a PURDUE UNIVERSITY   (United States)

^b SOUTHERN ILLINOIS UNIVERSITY EDWARDSVILLE   (United States)

^c BEN GURION UNIVERSITY OF THE NEGEV   (Israel)

^d GE GLOBAL RESEARCH   (United States)

^e ARGONNE NATIONAL LABORATORY   (United States)

^f NATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY   (United States)

^g Innovation Factory   (United States)

^h OKLAHOMA STATE UNIVERSITY   (United States)

ⁱ PENNSYLVANIA STATE UNIVERSITY   (United States)

^j LOUISIANA STATE UNIVERSITY   (United States)

^k UNIVERSITY OF PITTSBURGH   (United States)

^l MICHIGAN STATE UNIVERSITY   (United States)

^m Haryana 122001   (United States)

ⁿ Sterlite Technologies Limited   (United States)

^o UNIVERSITY OF WISCONSIN MADISON   (United States)

^p UNIVERSITY OF ROCHESTER   (United States)

more..

Author keywords

Advanced manufacturing; Healthcare; Laser processing; Optical communication; Precision collaboration

Indexed keywords

ADVANCED MANUFACTURING; DESIGN AND INTEGRATIONS; INTEGRATION FRAMEWORKS; INTEGRATION ISSUES; LASER PROCESS; PRECISION COLLABORATION; RESEARCH AND DEVELOPMENT; TECHNOLOGY INTEGRATION;

HEALTH CARE; OPTICAL COMMUNICATION;

MANUFACTURE;

EID: 84886452173     PISSN: 10908471     EISSN: 15206564     Source Type: Journal    
DOI: 10.1002/hfm.20555     Document Type: Article

References (89)

1. Bailey, N., Tan, W., &, Shin, Y. C., (2009). Predictive modeling and experimental results for residual stresses in laser hardening of AISI 4140 steel by a high power diode laser. Surface and Coatings Technology, 203 (14, 15), 2003-2012.
2. Baker, K. R., &, Trietsch, D., (2009). Principles of sequencing and scheduling. Hoboken, NJ: Wiley.
3. Bechar, A., Meyer, J., &, Edan, Y., (2009). An objective function to evaluate performance of human-robot collaboration in target recognition tasks. IEEE Transactions on Systems, Man, and Cybernetics Part C-Applications and Reviews, 39 (6), 611-620.
4. Bechar, A., Nof, S. Y., &, Wachs, J. P., (2012). Laser systems in precision interactions and collaboration. PRISM Center Research Report, Purdue University, West Lafayette, Indiana. Available to download at https://engineering.purdue.edu/∼prism/publications.shtml.
5. Birge, J. R., Kärtner, F. X., &, Nohadani, O., (2011). Improving thin film manufacturing yield with robust optimization. Applied Optics, 50 (9), C36-C40.
6. Bukkapatnam, S., Kamarthi, S., Huang, Q., Zeid, A., &, Komanduri, R., (2012). Nanomanufacturing systems: Opportunities for industrial engineers. IIE Transactions, 44 (7), 492-495.
7. Bukkapatnam, S. T. S., &, Cheng, C., (2010). Forecasting the evolution of nonlinear and nonstationary systems using recurrence-based local Gaussian process models. Physical Review E, 82 (5), 056206.
8. Blankenbach, K., &, Buckley, E., (2012). Perceptual effects of laser-based HUDs. Journal of Display Technology, 8 (4), 194-197.
9. Burns, M., (2012). Instagram's user count now at 40 million, saw 10 million new users in last 10 days. TechCrunch.
10. Chen, X. W., &, Nof, S. Y., (2012). Conflict and error prevention and detection in complex networks. Automatica, 48 (5), 770-778.
11. Cheng, C., Bukkapatnam, S. T. S., Raff, L. M., Hagan, M., &, Komanduri, R., (2012). Monte Carlo simulation of carbon nanotube nucleation and growth using nonlinear dynamic predictions. Chemical Physics Letters, 530, 81-85.
12. Cheng, C., Bukkapatnam, S. T. S., Raff, L. M., &, Komanduri, R., (2012). Towards control of carbon nanotube synthesis process using prediction-based fast Monte Carlo simulations. Proceedings of NAMRI/SME, 40.
13. Cheng, G. J., &, Yao, Y. L., (2002). Microstructure integrated modeling of multiscan laser forming. Journal of Manufacturing Science and Engineering, 124 (2), 379-388. (Pubitemid 35202628)
14. Cheng, G. J., &, Ye, C., (2009). Experiment, simulation and characterization on transmission laser coating of hydroxyapatite on metal implant. Part A, Journal of Biomedical Materials Research. doi:10.1002/jbm.a. 32325
15. Colville, F., (2010, July 26). Laser processes in solar remain firmly on long-term roadmaps as cell makers in China and Taiwan define short-term equipment trends. Photonics Online.
16. Ford, J. E., Goossen, K. W., Walker, J. A., Neilson, D. T., Tennant, D. M., Park, S. Y., &, Sulhoff, J. W., (2004). Interference-based micromechanical spectral equalizers. IEEE Journal of Selected Topics in Quantum Electronics, 10 (3), 579-587.
17. Gao, H., &, Cheng, G. J., (2010). Laser induced high-strain-rate superplastic 3D micro-forming of metallic thin film. IEEE/ASME Journal of Microelectromechanical Systems, 19 (2), 273-281.
18. Halani, P., &, Shin, Y. C., (2012). In-situ synthesis and characterization of shape memory alloy-Nitinol by laser direct deposition. Part A, Metallurgical and Materials Transactions 43 (2), 650-657.
19. Haymes, T., (2009). The three-E strategy for overcoming resistance to technological change. Special Session of the 25th Annual Conference on Information Technology, Detroit, MI.
20. Hecht, J., (2008). Understanding lasers: An entry-level guide (3rd ed.). New York, NY: IEEE Press.
21. Highway Loss Data Institute. (2012, July 3). Crash avoidance features reduce crashes, insurance claim study shows; autonomous braking and adaptive headlights yield biggest benefits [News release]. Retrieved from http://www.iihs.org/news/rss/pr070312.html
22. Hu, W., Shin, Y. C., &, King, G. B., (2010). Micromachining of metals, alloys and ceramics by picosecond laser ablation. Transactions of the ASME, Journal of Manufacturing Science and Engineering, 132 (1), 011009.
23. Huang, Q., (2011). Physics-driven Bayesian hierarchical modeling of nanowire growth process at each scale. IIE Transactions on Quality and Reliability, 43, 1-11.
24. Jacob, M., Li, Y. T., &, Wachs, J. P., (2011). A gesture driven robotic scrub nurse. Proceedings of the 2011 IEEE International Conference on Systems, Man, and Cybernetics, 2039-2044.
25. Janssen, G., (2011). Laser processes for high efficiency solar cells: Lasers in Silicon Photovoltaics Seminar, Laser World of Photonics Conference, May 25, 2011, Munich, Germany.
26. Kärtner, F. X., Matuschek, N., Schibli, T., Keller, U., Haus, H. A., Heine, C.,., Tschudi, T., (1997). Design and fabrication of double-chirped mirrors. Optic Letters, 22, 831-833. (Pubitemid 127596737)
27. Kasap, S., Ruda, H., &, Boucher, Y., (2012). Cambridge illustrated handbook of optoelectronics and photonics. Cambridge, UK: Cambridge University Press.
28. Ko, H. S., &, Nof, S. Y., (2012). Design and application of task administration protocols for collaborative production and service systems. International Journal of Production Economics, 135 (1), 177-189.
29. Kray, D., Bay, N., Cimiotti, G., Kleinschmidt, S., Kösterke, N., Lösel, A.,., Granek, F., (2010). Industrial LCP selective emitter solar cells with plated contacts. Proceedings of 35th IEEE Photovoltaic Specialists Conference, 2010; Honolulu, United States.
30. Lehto, M. R., Lesch, M. F., &, Horrey, W. J., (2009). Safety warnings for automation. In, S. Y. Nof, (Ed.), Springer handbook of automation (pp. 67-695). New York, NY: Springer.
31. Lehto, M. R., Papastavrou, J. P., Ranney, T. A., &, Simmons, L., (2000). An experimental comparison of conservative vs. optimal collision avoidance system warning thresholds. Safety Science, 36 (3), 185-209.
32. Li, L., (2010). The challenges ahead for laser macro, micro, and nano manufacturing. In, J. Lawrence, J. Pou, D. K. Y. Low, &, E. Toyserkani, (Eds.), Advances in laser materials processing: Technology, research and applications (pp. 20-42). Oxford, Canbridge: CRC Press, Woodhead.
33. Li, L., Hong, M., Schmidt, M., Zhong, M., Malshe, A., Huis in'tVeld, B., &, Kovalenko, V., (2011). Laser nano-manufacturing: State of the art and challenges. CIRP Annals-Manufacturing Technology, 60 (2), 735-755.
34. Majumdar, D. J., &, Manna, I., (2011). Laser material processing. International Materials Reviews, 56 (5-6), 341-388.
35. marketsandmarkets.com (2011, July). Diagnostic imaging market (CT, MRI, X-ray & ultrasound): Competitive landscape and global forecasts 2010-2016. marketsandmarkets.com. Report Code: MD 1628.
36. McKinney, J. D., Peroulis, D., &, Weiner, A. M., (2008). Dispersion limitations of ultra-wideband wireless links and their compensation via photonically enabled arbitrary waveform generation. IEEE Transactions on Microwave Theory and Techniques, 56 (3), 710-719.
37. McLennan, M., &, Kennell, R., (2010). HUBzero: A platform for dissemination and collaboration in computational science and engineering. Computing in Science and Engineering, 12 (2), 48-52.
38. Morse, J. D., et al. (2009). Research challenges for integrated systems nanomanufacturing. Report from the National Science Foundation Workshop, February 10-11, 2008. Retrieved from http://eprints.internano.org/49/1/NMS- Workshop-Report.pdf
39. Muhrer, E., Reinprecht, K., &, Vollrath, M., (2012). Driving with a partially autonomous forward collision warning system: How do drivers react ? Human Factors, 54 (5), 698-708.
40. Murison, R., Dunsky, C., Rekow, M., Dinkel, C., Pern, J., Mansfield, L.,., Nikumb, S., (2010). CIGS P1, P2, and P3 laser scribing with an innovative fiber laser. Proceedings of the 35th IEEE PV Specialists Conference.
41. National Academy of Engineering. (2008). Nanophotonics: Accessibility and applicability. Washington, DC: National Academies Press.
42. National Academy of Engineering. (2010). Seeing photons: Progress and limits of visible and infrared sensor arrays. Washington, DC: National Academies Press.
43. National Academy of Engineering (2012). Optics and photonics: Essential technologies for our nation. Washington, DC: National Academies Press.
44. Nof, S. Y., (2003). Design of effective e-work: Review of models, tools, and emerging challenges. Production Planning & Control, 14 (8), 681-703.
45. Nof, S. Y., (2007). Collaborative control theory for e-work, e-production, and e-service. Annual Reviews in Control, 31 (2), 281-292. (Pubitemid 350161379)
46. Nohadani, O., Birge, J. R., Kärtner, F. X., &, Bertsimas, D. J., (2008). Robust chirped mirrors. Applied Optics, 47 (14), 2630-2636.
47. Nolte, D. D., (2011). Optical interferometry for biology and medicine. New York, NY: Springer.
48. Odlyzko, A., (2012). The volume and value of information. International Journal of Communication, 6, 920-935.
49. Pantsar, H., (2010). Laser process optimization for improving emitter wrap through drilling rates. Proceeding of the 35th IEEE PV Specialist Conference.
50. Park, C., Huang, J. Z., Huitink, D., Kundu, S. B., Mallick, K., Liang H., &, Ding, Y., (2012). A multistage, semi-automated procedure for analyzing the morphology of nanoparticles. IIE Transactions, 44 (7), 507-522.
51. Patel, R., Clark, D., &, Bovatsek, J., (2007). Laser scribing: A key enabling technology for manufacturing of low cost thin film photovoltaic cells, in Proceedings of ICALEO Conference in Orlando, Florida, 113-118.
52. Perception-Based Engineering Research Group. (2012). Perception-based engineering research. Ray W. Herrick Laboratories Report, School of Mechanical Engineering, Purdue University.
53. Pinedo, M., (2008). Scheduling: Theory, algorithms and systems. New York, NY: Springer.
54. Pisano, G. P., (1996). The development factory: Unlocking the potential of process innovation. Boston, MA: Harvard Business School Press.
55. Proctor, R. W., &, Vu, K.-P. L., (2012). Human information processing: An overview for human-computer interaction. In, J. Jacko, (Ed.), The human-computer interaction handbook (3rd ed.). Boca Raton, FL: CRC Press.
56. Quimby, R. S., (2006). Photonics and lasers: An Introduction. Hoboken, NJ: Wiley-Interscience.
57. Röder, T., et al. (2009). 0.4% absolute efficiency gain of crystalline silicon solar cells by laser doped selective emitters. Proceedings of the 34th IEEE PV Specialist Conference.
58. Photonics, S. A., (2012). About SA Photonics. Retrieved September 22, 2012, from http://www.saphotonics.com/about/.
59. Savage, N., (2012). Business news: Laser market sees record sales. Nature Photonics, 6 (4), 215-216.
60. Schoeffel, K., &, Shin, Y. C., (2007). Laser cladding of two hardfacing alloys onto cylindrical low alloy steel substrates with a high power direct diode laser. ASME International Conference on Manufacturing Science and Engineering, October 15-18, 2007, Atlanta, GA.
61. Schulz-Ruhtemberg, M., (2011). Application of new laser sources. Lasers in Silicon Photovoltaics Seminar, Laser World of Photonics Conference, May 25, 2011, Munich, Germany.
62. Seok, H. S., &, Nof, S. Y., (2011). The HUB-CI initiative for cultural, education and training, and healthcare networks. Proceedings of 21st ICPR, August 2011, Stuttgart, Germany.
63. Shi, L., &, Ólafsson, S., (2008). Nested partitions method: Theory and applications. New York, NY: Springer.
64. Shin, Y. C., (2011, January/February). Laser assisted machining: LAM benefits a wide range of difficult-to-machine materials. Industrial Laser Solutions, 18-22.
65. Silfvast, W. T., (2008). Laser fundamentals (2nd ed.). Cambridge, UK: Cambridge University Press.
66. Steen, W. M., &, Mazumder, J., (2010). Laser material processing. London: Springer.
67. Sullivan, B., &, Dobrowolski, J., (1992). Deposition error compensation for optical multilayer coating: I. Theoretical description. Applied Optics, 31, 3821-3835.
68. Taniguchi, N., (1983). Current status in, and future trends of ultra-precision machining and ultra-fine materials processing. CIRP Annals, 32 (2), 573-582. (Pubitemid 14520341)
69. Tirole, J., (1988). The theory of industrial organization. Cambridge, MA: MIT Press.
70. Tjahjono, B. S., et al. (2010). 18.9% efficient laser doped selective emitter solar cell on industrial grade p-type Czochralski wafer. Proceedings of the 25th European Photovoltaic Solar Energy Conference and Exhibition/5th World Conference on Photovoltaic Energy Conversion, 6-10 September 2010, Valencia, Spain.
71. Träger, F., (2012). Springer handbook of lasers and optics (2nd ed.). Dordrecht: Springer.
72. Tünnermann, A., (2012). The engine of growth for the entire industry. Laser Technik Journal, 9 (1), 1.
73. Vadali, M., Ma, C., Duffie, N. A., Li, X., &, Pfefferkorn, F. E., (2012). Pulsed laser micro polishing: Surface prediction model. Journal of Manufacturing Processes, 14 (3), 307-315.
74. Van Lange, P. M., Kruglanski, A. W., &, Higgins, E., (2012). Handbook of theories of social psychology (Vol. 1). Thousand Oaks, CA: Sage.
75. Visschers, V. M., Wiedemann, P. M., Gutscher, H. H., Kurzenhäuser, S. S., Seidl, R. R., Jardine, C. G., &, Timmermans, D. M., (2012). Affect-inducing risk communication: Current knowledge and future directions. Journal of Risk Research, 15 (3), 257-271.
76. Vlasov, Y., (2012). Silicon CMOS-integrated nano-photonics for computer and data communications beyond 100G. IEEE Communications Magazine, 50, S67-S72.
77. Wachs, J. P., (2010). Gaze, posture and gesture recognition to minimize focus shifts for intelligent operating rooms in a collaborative support system. International Journal of Computers, Communications and Control, 5 (1), 106-124.
78. Wachs, J. P., Kölsch, M., Stern, H., &, Edan, Y., (2011). Vision-based hand gesture applications: Challenges and innovations. Communications of the ACM, 54 (2), 60-71.
79. Weiner, A. M., (2009). Ultrafast optics. Hoboken, NJ: Wiley.
80. Weiner, A. M., (2011). Ultrafast optical pulse shaping: a tutorial review. Journal of Optical Communications, 284, 3669.
81. Wu, B., &, Shin, Y. C., (2007). From incident laser pulse to residual stress: A complete and self-closed model for laser shock peening. Transactions of the ASME, Journal of Manufacturing Science and Engineering, 129 (1), 117-125. (Pubitemid 46723450)
82. Xu, B.-W., Gunn, J. M., Dela Cruz, J. M., Lozovoy, V. V., &, Dantus, M., (2006). Quantitative investigation of the multiphoton intrapulse interference phase scan method for simultaneous phase measurement and compensation of femtosecond laser pulses. Journal of the Optical Society of America B, 23 (4), 750-759. (Pubitemid 43833986)
83. Xu, Z., Reed, C. B., Konercki, G., Parker, R. A., Gahan, B. C., Batarseh, S. R.,., Skinner, N., (2003). Specific energy for pulsed laser rock drilling. Journal of Laser Applications, 15, 25.
84. Yoo, A. C., Gilbert, G. R., &, Broderick, T. J., (2010). Military robotic combat casualty extraction and care. In, J. Rosen, H. Hannaford, &, R. M. Satava, (Eds.), Surgical robotics systems, applications, and visions. New York, NY: Springer.
85. Zhang, M. Y., Nian, Q., &, Cheng, G. J., (2012). Room temperature deposition of alumina-doped zinc oxide (AZO) on flexible substrates by direct pulsed laser recrystallization. Applied Physics Letter, 100, 151902.
86. Zhang, X.-C., &, Xu, J.-Z., (2009). Introduction to THz wave photonics. New York, NY: Springer.
87. Zhang, Y., &, Cheng, G. J., (2011). Highly conductive and transparent alumina-doped ZnO films processed by direct pulsed laser recrystallization at room temperature. Applied Physics Letter, 99, 051904.
88. Zhang, Y., Cheng, G. J., Erasquin, U., &, Cai, C., (2011). Laser engineered multilayer coating of BCP/Ti nanocomposite on titanium implants. ACS Applied Materials and Interfaces, 3 (2), 339-350.
89. Zhong, H., Wachs, J. P., &, Nof, S. Y., (2013). A collaborative telerobotics network framework with hand gesture interface and conflict prevention. International Journal of Production Research. doi:10.1080/00207543. 2012.756591