Particleboards production from date palm biomass

European Journal of Wood and Wood Products

Volumn 71, Issue 6, 2013, Pages 717-723

  Amirou, Siham ^a   Zerizer, Abdelatif ^a   Pizzi, Antonio ^b   Haddadou, Imane ^a   Zhou, Xiaojian ^b  

^a UNIVERSITY OF BOUMERDES   (Algeria)

^b UNIVERSITÉ DE LORRAINE   (France)

Author keywords

[No Author keywords available]

Indexed keywords

ALTERNATIVE RAW MATERIAL; BETTER PERFORMANCE; FOREST-PRODUCTS INDUSTRY; INTERNAL BOND STRENGTHS; MELAMINE UREA FORMALDEHYDES; PHENOL-FORMALDEHYDE; PHENOL-FORMALDEHYDE RESIN; THICKNESS SWELLING;

BOND STRENGTH (MATERIALS); MANUFACTURE; PARTICLE BOARD; PHENOLIC RESINS; RESINS; UREA FORMALDEHYDE RESINS;

FORESTRY;

BEND STRENGTH; FORESTRY; MANUFACTURE; PARTICLE BOARDS; POLYPHENOLICS; POLYUREAS;

EID: 84886088557     PISSN: 00183768     EISSN: 1436736X     Source Type: Journal    
DOI: 10.1007/s00107-013-0730-3     Document Type: Article

References (27)

1. Abdouche F (2010) Communication from the botanic unit development at the ministry of agriculture and rural development - Algeria. Algerian Press Service, APS, Algiers
2. Alma MH, KalaycIoǧlu H, Bektas I, Tutus A (2005) Properties of cotton carpel-based particleboards. Ind Crops Prod 22(8):141-149
3. Ashori A, Nourbakhsh A (2008) Effect of press cycle time and resin content on physical and mechanical properties of particleboard panels made from the underutilized low-quality raw materials. Ind Crops Prod 28:225-230
4. El Morsy MMS (1980) Studies on the rachis of Egyptian date palm leaves for hardboard production. Fibre Sci Technol 13(4):317-321
5. EN 310 (1993) Wood based panels - determination of modulus of elasticity in bending strength. CEN - European Committee for Standardization
6. EN 317 (1993) Particleboards - determination of swelling in thickness after immersing in water. CEN - European Committee for Standardization
7. EN 319 (1993) Particleboards - determination of tensile strength perpendicular to the plane of the board. CEN - European Committee for Standardization
8. EN 312 (2005) Particleboards-specifications. European Committee for Standardization, Brussels (Belgium)
9. Guler C, Ozen R (2004) Some properties of particleboards made from cotton stalks (Gossypium hirsitum L.). Holz Roh Werkst 62:40-43
10. Hegazy SS, Aref IM (2010) Suitability of some fast-growing trees and date palm fronds for particleboard production. For Prod J 60(7/8):599-604
11. Iskanderani FI (2008) Physical properties of particleboard panels manufactured from phoenix dactylifera-L (date palm) mid-rib chips using ureaformaldehyde binder. Int J Polym Mater 57(10):979-995
12. KalaycIoǧlu H (1992) Utilization of annual plant residues in production of particleboard. ORENKO-92. First national forest product congress, Trabzon, Turkey, pp 288-292
13. Khiari R, Mhenni MF, Belgacem MN, Mauret E (2010) Chemical composition and pulping of date palm rachis and Posidonia oceanica - a comparison with other wood and non-wood fibre sources. Bioresource Technol 101:775-780
14. Khristova P, Kordsachia O, Khider T (2005) Alkaline pulping with additives of date palm rachis and leaves from Sudan. Bioresource Techno 96:79-85
15. Messar EM (1996) The Algerian date sector: situation and prospects on the horizon 2010. Options méditerranéennes 28:23-44
16. Mohamad Ibrahim MN, Zakaria N, Sipaut CS, Sulaiman O, Hashim R (2011) Chemical and thermal properties of lignins from oil palm biomass as a substitute for phenol in a phenol formaldehyde resin production. Carbohyd Polym 86:112-119
17. Mohamed Ahmed MVO, Bouna ZEO, Mohamed Lemine FM, Djeha TKO, Trifi M, Mohamed Salem AO (2011) Use of multivariate analysis to assess phenotypic diversity of date palm (Phoenix dactylifera L.) cultivars. Sci Hort-Amst 127:367-371
18. Nasser RA, Al-Mefarrej HA (2011) Midribs of date palm as a raw material for wood-cement composite industry in Saudi Arabia. J Appl Sci Res 15(12):1651-1658
19. Nemli G, Demirel S, Gumuokaya E, Aslan M, Acar C (2009) Feasibility of incorporating waste grass clippings (Lolium perenne L.) in particleboard composites. Waste Manag 29:1129-1131
20. 2 filled rice husk/polypropylene composites: physico-mechanical properties. Ind Crops Prod 33:183-187
21. Raj BR (2010) Date palm cultivation in the changing scenario of Indian arid zones: challenges and prospects. In: Desert plants: biology and biotechnology, vol 4, pp 423-459. doi: 10.1007/978-3-642-02550-1-20
22. Stone JE, Scallan AM (1965) The effect of component removal upon the porous structure of the cell wall of wood. J Polym Sci Pol Sym 11:13-25
23. TAPPI T 204 cm-97 (1997) Solvent extractives of wood and pulp
24. TAPPI 222 om-02 (2002) Acid insoluble lignin in wood and pulp
25. TAPPI T 257 cm-02 (2002) Sampling and preparing wood for analysis
26. Wise LE, Murphy M (1946) A Chlorite holocellulose, its fractionation and bearing on summative wood analysis and studies on the hemicelluloses. Paper Trade J 122:35-43
27. Ziegler GA (1974) Water vapor sorption by softwood cell wall constituents. PhD thesis, The Pennsylvania State University, Agricultural, Forestry and Wildlife