Materials for solid oxide fuel cells

Recent Trends in Fuel Cell Science and Technology

Volumn , Issue , 2007, Pages 286-331

  Basu, Rajendra N ^a  

^a CSIR CENTRAL GLASS AND CERAMIC RESEARCH INSTITUTE   (India)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 84885775648     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1007/978-0-387-68815-2_12     Document Type: Chapter

References (191)

1. Anderson, H. U. (1992), Review of p-type doped perovskite materials for SOFC and other applications, Solid State Ionic, 52, 33-41.
2. 3 system, in: Proceedings of the Forth International Symposium on Solid Oxide Fuel Cells (SOFC-IV), Eds. M. Dokiya, O. Yamamoto, H. Tagawa and S. C. Singhal. The Electrochemical Society Proceedings Series, Pennington, NJ, p. 375-384.
3. Anderson, H. U. and Tietz, F. (2003), Interconnects, in: High Temperature Solid Oxide Fuel Cells: Fundamentals, design and Applications, Eds. S. C. Singhal and K. Kendall, Elsevier, UK, pp. 173-195.
4. 3 (Ln=lanthanides) system, Solid State Ionics, 121, 133-139.
5. Armstrong, T. R., Hardy, J. S., Simmer, S. P. and Stevenson, J. W. (1999), Optimizing lanthanum chromite interconnects for solid oxide fuel cells, Proceedings of the Sixth International Symposium on Solid Oxide Fuel Cells (SOFC-VI), Eds. S. C. Singhal and M. Dokiya. The Electrochemical Society Proceedings Series, Pennington, NJ, pp. 706-715.
6. Armstrong, T. J., Homel, M. A. and Virkar, A. V. (2003), Evaluation of metallic interconnects for use in intermediate temperature SOFC, Eigth International Symposium on Solid Oxide Fuel Cells, Eds. S. C. Singhal and M. Dokiya, pp. 841-850. The Electrochemical Society, Pennington, NJ, USA.
7. Badwal, S. P. S. and Foger, K. (1997), Materials for Solid Oxide Fuel Cells, Materials Forum, 21, 187-224.
8. Badwal, S. P. S. (1992), Zirconia-based solid electrolytes: microstructure, stability and ionic conductivity, Solid State Ionics, 52, 23-32.
9. Badwal, S. P. S., Ciaachi, FT. and Milosevic, D. (2000), Scandia-zirconia electrolytes for intermediate temperature solid oxide fuel cells, Solid State Ionics, 136-137, 91-99.
10. 3 glass sealant with components of SOFCs, J. Electrochem. Soc, 151, A558-A562.
11. Bance, P., Brandon, N. P., Grivan, B., Holbeche, P., O'Dea, S. and Steele, B. C. H. (2004), Spinning-out a fuel cell company from a UK University-2 years of progress at Ceres Power, J. Power Sources, 131, 86-90.
12. Bansal, N. P. and Gamble, E. A. (2005), Crystallization kinetics of a SOFC seal glass by DTA, J. Power Sources, Available online.
13. Barford, R., Koch, S., Liu, Y.-L, Larsen, P. H. and Hendriksen, P. V. (2003), Long-term tests of DK-SOFC cells, Eighth International Symposium on Solid Oxide Fuel Cells, Eds. S. C. Singhal and M. Dokiya, pp. 1158-1166. The Electrochemical Society, Pennington, NJ, USA.
14. Barnett, S. A. (2003), Direct hydrocarbon SOFCs, Handbook of Fuel Cells - Fundamentals, Technology and Applications, Edited by W. Vielstich, H. A. Gasteiger and A. Lamm, Volume 4: Fuel Cell Technology and Applications, pp. 1098-1108, John Wiley & Sons, Ltd.
15. Basu, R. N., Randall, C. A. and Mayo, M. J. (2001), Fabrication of dense zirconia electrolyte films for tubular solid oxide fuel cells by electrophoretic deposition, J. Am. Ceram. Soc. 84, 33-40.
16. Basu, R. N., Altin, O., Mayo, M. J., Randall, C. A. and Eser, S. (2001), Pyrolytic carbon deposition on porous cathode tubes and its use as an interlayer for solid oxide fuel cell zirconia electrolyte fabrication, J. Electrochem. Soc, 148, A506-A512.
17. 3 as a cathode contact material for solid oxide fuel cells, J. Solid State Electrochem., 7, 416-420.
18. Basu, R. N., Tietz, F, Wessel, E. and Stover, D. (2004), Interface reactions during co-firing of solid oxide fuel cell components, J. Mater. Process. Technol., 147, 85-89.
19. Basu, R. N., Blass, G., Buchkremer, H. P., Stover, D., Tietz, R, Wessel, E. and Vinke, I. C. (2005), Simplified processing of anode-supported thin film planar solid oxide fuel cells, J. Euro. Ceram. Soc, 25, 463-471.
20. 3.
21. Baur, E. and Preis, H. (1937), Über Brennstoffketten mit Festkörpern (On fuel chains with solids), Z Elektrochem., 43, 727-732.
22. Beaudet-Savignat, S., Lima, A., Brathet, C. and Henry, A. (2003), Elaboration and ionic conduction of apatite-type rare-earth oxides, Proc. of the Eighth International Symposium on Solid Oxide Fuel Cells (SOFC-VIII), Eds. S. C. Singhal and M. Dokiya, pp. 372-378.
23. Boivin, J. C. and Mairesse, G. (1998), Recent material developments in fast oxide ion conductors, Chem. Mater. 10, 2870-2888.
24. Bonanos, N., Knight, K. S. and Ellis, B. (1995), Perovskite solid electrolytes: Structure, transport properties and fuel cell applications, Solid State Ionics, 79, 161-170.
25. Bram, M., Brtinings, S. E., Meschke, F, Meulenberg, W. A., Buchkremer, H. P., Steinbrech, R. W. and Stöver, D, (2001), Application of metallic gaskets in SOFC stacks, Proc. Seventh International Symposium on Solid Oxide Fuel Cells (SOFC-VII), Eds. H. Yokokawa and S. C. Singhal, pp. 875-884, The Electrochemical Soc, Pennington, NJ, USA.
26. Bram, M., Reckers, S., Drinovac, P., Monch, J., Steinbrech, R. W., Buchkremer, H. P. and Stöver, D. (2004), Deformation behavior and leakage tests of alternating sealing materials for SOFCs stacks, J. Power Sources, 138, 111-119.
27. Brisse, A., Barthet, C, Sauvet, A. L., Beaudet-Savignat, S. and Fouletier, J., Study of a new solid oxide fuel cell operated at intermediate temperature 650°-700°C, Ninth International Symposium on Solid Oxide Fuel Cells (SOFC-IX), Eds. S. C, Singhal and J. Mizusaki, pp. 363-370. The Electrochemical Soc, Inc., Pennington, NJ, USA.
28. Brown, M., Primdahl, S. Mogensen, M. (2000), Structure/performance relations for Ni/yttria-stabilized zirconia anodes for solid oxide fuel cells, J. Electrochem. Soc. 147, 475-485.
29. Buehkremer, H. P., Diekmann, U. and Stover, D. (1996), Components manufacturing and stack integration of an anode supported planar SOFC systems, Proceedings of the Second European Solid Oxide Fuel Cell Forum, Vol. 1, Ed. B. Thorstensen. Gottingen, Germany, pp. 221-228.
30. Buehkremer, H. P., Diekmann, U., De Haart, L. G., Kabs, H., Stimming, U. and Stöver, D. (1997), Advances in the anode-supported planar SOFC technology, Proc. of the Fifth International Symposium on Solid Oxide Fuel Cells (SOFC-V), Eds. U. Stimming, Singhal, S. C, Tagawa, H. and Lehnert, W. pp. 160-170, The Electrochemical Soc. Inc., Pennington, NJ, USA.
31. 3 for use as cathode material for solid oxide fuel cells, PhD Thesis, Jadavpur University, Calcutta, India.
32. Chakraborty, A., Basu, R. N. and Maiti, H. S. (2000), Low temperature sintering of La (Ca) Cr03 prepared by an autoignition process, Mater. Letts., 45, 162-166.
33. Chou, Y. S. and Stevenson, J. W. (2002), Thermal cycling and degradation mechanisms of compressive mica-based seals for SOFCs, J. of Power Sources, 112, 376-83.
34. Chou, Y. S., Stevenson, J. W. and Chick, L. A. (2002), Ultra-low leak rate of hybrid compressive mica-seals for SOFCs, J. Power Sources, 112, 130-136.
35. Chou, Y. S. and Stevenson, J. W. (2003), Phlogopite mica-based compressive seals for SOFCs: effect of mica thickness, J. Power Sources, 124, 473-78
36. Costamagna, P., Costa, P. and Antonucci, V. (1998), Micro-modeling of solid oxide fuel cell electrodes, Electrochem. Acta, 43, 375-394.
37. Choudhary, C. B., Maiti, H. S. and Subbarao, E. C. (1980), Solid Electrolytes and their Applications, Ed. E. C. Subbarao, Plenum Press, pp. 34-49.
38. Dees, D. W., Claar, T. D., Easier, T. E., Fee, D. C. and Mrazek, F. C. (1987), Conductivity of porous Ni/Zr02-Y203 cermets, J. Electrochem. Soc, 134, 2141-2146.
39. De Jonghe, L. C., Jacobson, C. P. and Visco, S. J. (2003), Supported electrolyte thin film synthesis of solid oxide fuel cells, Annu. Rev. Mater. Res., 33, 169-182.
40. De Souza, S., Visco, S. J. and De Jonghe, L. C. (1997), Thin-film solid oxide fuel cell with high performance at low temperature, Solid State Ionics, 98, 57-61.
41. Deng, X. and Petric, A. (1999), A solution to anode-electrolyte reaction in lanthanum gallate fuel cells, Processing and characterization of electrochemical materials and devices, pp. 87-94, Eds. P. N. Kumta, R. Manthiram, S. K. Sundaram and Y. M. Chiang, American Ceramic Society, Westerville, OH, USA.
42. Divisek, J., Wilkenhoner, R. and Volfkovich, Y. (1999), Structure investigations of SOFC anode cermets - Part I: Porosity investigations. J. Appl. Electrochem. 29, 153-163.
43. Dokiya (2002), SOFC system and technology, Solid State Ionics, 152-153, 383-392.
44. 3-x, J. Mater. Chem. 7, 79-83.
45. Duquette, J. and Petric, A. (2004), Silver wire seal design for planar solid oxide fuel cell stack, J. Power Sources, 137, 71-75.
46. Duquette, J., Basu, R. N., Deng, X., Zhitomirsky, I. and Petric, A. (2005), Fabrication of cathode supported SOFC by colloidal processing, Ninth International Symposium on Solid Oxide Fuel Cells (SOFC-IX), Eds. S. C. Singhal and J. Mizusaki, pp. 482-488. The Electrochemical Soc, Inc., Pennington, NJ, USA.
47. Dyer, C. K. (1990), A novel thin film electrochemical device for energy conversion, Nature, 343, 547-548.
48. Ler, K., Solow, G., Otschik, P. and Schaffrath, W. (1999), BAS (BaO-Al203-Si02) glasses for high temperature applications, J. Euro. Ceram. Society., 19, 1101-1104.
49. Feng, M. and Goodenough, J. B. (1994), A superior oxide-ion electrolyte. Euro. J. Solid State Inorg. Chem., 31, 663-672.
50. Fergus, J. W. (2004), Lanthanum chromite-based materials for solid oxide fuel cell interconnects, Solid State Ionics, 171, 1-15.
51. Fergus, J. W. (2005), Metallic interconnects for solid oxide fuel cells, Mater. Sci. & Engr., A397, 271-283.
52. Fergus, J. W. (2005), Sealants for solid oxide fuel cells, J. Power Sources, 147, 46-57.
53. Fleig, J., Kreuer, K. D. and Maier, J. (2003), Ceramic Fuel Cells, Handbook of Advanced Ceramics, Editor-in-Chief, S. S0miya, Vol. II, pp. 59-105.
54. Fleig, J. (2002), On the width of the electrochemically active region in mixed conducting solid oxide fuel cell cathodes, J. Power Sources, 105, 228-238.
55. 3: Dependence on preparation and processing procedures, Ninth International Symposium on Solid Oxide Fuel Cells (SOFC-IX). Eds. S. C. Singhal and J. Mizusaki, pp. 1417-1428. The Electrochemical Soc. Inc., Pennington, NJ, USA.
56. Galasso, F. S. (1969), Structure, properties and preparation of perovskite-type compounds, Pergaman Press, Oxford.
57. Gao, W. and Sammes, N. M. (1999), An Introduction to Electronic and ionic Materials, World Scientific, Singapore.
58. Ghosh, D., Wang, G., Brule, R., Tang, E. and Huang, P. (1999), Performance of anode supported planar SOFC cells, Proc. of the Sixth International Symposium on Solid Oxide Fuel Cells (SOFC-VI), Eds., S. C. Singhal and M. Dokiya, pp. 822-829. The Electrochemical Society Inc., Pennington, NJ, USA.
59. Godickemeier, M. and Gauckler, L. J. (1998), Engineering of solid oxide fuel cells with ceria-based electrolytes. J. Electrochem. Soc, 145, 414-421.
60. Goodenough, J. B. (2003), Oxide-ion electrolytes, Annu. Rev. Mater. Res., 33, 91-228.
61. Gorte, R. J., Park, S., Vohs, J. M. and Wang, C. (2000), Anodes for direct oxidation of dry hydrocarbons in a solid oxide fuel cell, Adv. Mater., 12, 1465-1469.
62. Gorte, R. J. and Vohs, J. M. (2003), Novel SOFC anodes for the direct electrochemical oxidation of hydrocarbons, Journal of Catalysis, 216, 477-486.
63. Haile, S. M., Fuel cell materials and components, Acta Materialia, 51, 5981-6000 (2003).
64. Hannappel, V. A. C., Shemet, V, Vinke, I. C. and Quadakkers, W. J. (2005), A novel method to evaluate the suitability of glass sealant-alloy combinations under SOFC stack conditions, J. Power Sources., 141, 102-107.
65. th April.
66. Hibino, T, Ushiki, K. and Kuwahara, Y. (1996), New concept of simplifying SOFC system, Solid State Ionics, 91, 69-74.
67. Hibino, T., Hashimoto, A., Inoue, T, Tokuno, J., Yoshida, S. and Sano, M. (2000), A low-operating temperature solid oxide fuel cell in hydrogen-air mixtures, Science, 288, 2031-2033.
68. Hibino, T., Hasahimoto, A., Yano, M., Sizuki, M., Yoshida, S. and Sano, S. (2002), High performance anodes for SOFCs operating in methane-air mixture at reduced tempertures, J. Electrochem. Soc. 149, A133-A136.
69. Higgins, S., Sammes, N. and Smirnova, A. (2005), Proton-conductive electrolyte materials for protonic ceramic fuel cells (PCFCs), Proc. of the ninth international symposium on solid oxide fuel cells (SOFC-IX), Eds., S. C. Singhal and J. Mizusaki, Vol. 2, pp. 1149-1155. The Electrochemical Society Inc., Pennington, NJ, USA.
70. Hilpert, K., Quadakkers, W. J. and Singheiser, L. (2003), Interconnects, Handbook of Fuel Cells: Fundamentals, Technology and Applications, Eds. W. Vielstich, H. A. Gasteiger and A. Lamm. Vol. 4: Fuel Cell Technology and Applications, pp. 1037-54.
71. Herbstritt, D., Warga, C, Weber, A. and Ivers-Tiffee (2001), Long-term stability of SOFC with Sc-doped zirconia electrolyte, Proc. Seventh International Symposium on Solid Oxide Fuel Cells (SOFC-VII), Eds. H. Yokokawa and S. C. Singhal, pp. 349-357, The Electrochemical Soc, Pennington, NJ, USA.
72. Horita, T., Xiong, Y, Yamaji, K., Sakai, N. and Yokokawa, H. (2002), Chracterization of Fe-Cr alloys for reduced operation temperature SOFCs, Fuel Cells, 2, 189-194.
73. Horvat, M., Samardzija, Z., Hole, J. and Bernik, S. (1999), Subsolids phase equilibria in the La203-Ga203-Ce02 system, J. Mater. Res., 14, 4460-4462.
74. th Meeting, October 16-21, Los Angeles, California.
75. 3, J. Eletrochem. Soc, 144, 3620-3624.
76. Huang, K., Feng, M. and Goodenough, J. B. (1998), Synthesis and electrical properties of dense Ce09Cdo jOj 95 ceramics. J. Am. Ceram. Soc, 81, 357-362.
77. Huang, K., Wan, J-W and Goodenough, J. B. (2001), Increasing power density of LSGM-based solid oxide fuel cells using new anode materials, J. Electrochem. Soc, 148, A788-A794.
78. Huang, P. and Petric, A. (1996), Superior oxygen ion conductivity of lanthanum gallate doped with strontium and magnesium, J. Electrochem. Soc, 143, 1644-1648.
79. Hui, S. and Petric, A. (2002), Electrical conductivity of yttria doped SrTi03: Influence of transition metal additives, Mater. Res. Bull., 37, 1215-1231.
80. Hui, S. and Petric, A. (2002), Electrical properties of yttrium-doped strontium titanate under reducing condition, J. Electrochem. Soc, 149, J1-J10.
81. Isenberg, A. O. (1981), Energy conversion via solid oxide electrolyte electrochemical cells at high temperatures, Solid State Ionics, 3/4, 431-437.
82. Ishihara, T., Matsuda, H. and Takita, Y. (1994), Doped LaGa03 perovskite-type oxide as a new oxide ion conductor, J. Am. Chem. Soc. 116, 3801-3803.
83. 3 by doping Co, Chem. Mater., 11, 2081-2088.
84. Ishihara, T., Sato, K. and Takita, Y. (1996), Electrophoretic deposition of Y203-stabilized Zr02 electrolyte films in solid oxide fuel cells, J. Am. Ceram. Soc, 79, 913-919.
85. Ishihara, T., Novel electrolytes operating at 400-600°C (2003), Handbook of Fuel Cells - Fundamentals, Technology and Applications, Edited by W. Vielstich, H. A. Gasteiger and A. Lamm, Volume 4: Fuel Cell Technology and Applications, pp. 1109-1122, John Wiley & Sons Ltd.
86. Ishiahara, T, Sammes, N. M. and Yamamoto, O. (2003), Electrolytes, in: High Temperature Solid Oxide Fuel Cells: Fundamentals, design and Applications, Eds. S. C. Singhal and K. Kendall, Elsevier, UK, pp. 83-117.
87. Iwahara, H., Uchida, H. and Tanaka, S. (1983), High temperature type proton conductor based on SrCe03 and its application to solid electrolyte fuel cells, Solid State Ionics, 9-10, 1021-1025.
88. 3, J. Electrochem. Soc, 135, 529-533.
89. 3, J. Mater. Sci., 20, 695-97.
90. Jiang, Y. and Virkar, A. V. (2001), A high performance, anode-supported solid oxide fuel cell operating on direct alcohol, J. Electrochem. Soc, 148, A706-A709.
91. Jiang, Y. and Virkar, A. V. (2003), Fuel composition and diluent Effect on gas transport and performance of anodesupported SOFCs, J. Electrochem. Soc, 150, A942-A951.
92. Jørgensen, M. J., Holtappels, P. and Appel, C. C. (2000), Durability test of SOFC cathodes, J. Appl. Electrochem., 30, 411-418.
93. Joshi, A. V, Steppan, J. J., Taylor, D. M. and Elangovan, S. (2004), Solid electrolyte materials, devices, and applications, J. Electroceramics, 13, 619-625.
94. Kendall, K., Minh, N. Q. and Singhal, S. C. (2003), Cell and stack design, High Temperature Solid Oxide fuel Cells: Fundamentals, Design and Applications, Eds.: S. C. Singhal and K. Kendall, Elsevier, UK, p. 197-228.
95. Kilner, J. A. (2005), Brian Steele's contributions to solid state ionics, Ninth International Symposium on Solid Oxide Fuel Cells (SOFC-IX), Eds. S. C. Singhal and J. Mizusaki, pp. 13-19. The Electrochemical Soc. Inc., Pennington, NJ, USA.
96. Kim, J.-W, Virkar, A. V, Fung, K.-Z., Mehta, K. and Singhal, S. C. (1999), Polarization effects in intermediate temperature, anode-supported solid oxide fuel cells, J. Electrochem. Soc. 146, 69-78.
97. Kramer, S. Spears, M. and Tuller, H. L. (1994), Conduction in titanate pyrochlores - role of dopants, Solid State Ionics, 72:59-66.
98. Kreuer, K. D. (2003), Proton conducting oxides, Ann. Rev. Mater. Res., 33, 333-360.
99. Kuo, J. H., Anderson, H. U. and Sparlin, D. M. (1989), Oxidation reduction behavior of undoped and Sr-doped LaMn03 nonstoichiometry and defect structure, J. Solid State Chem., 83, 52-60.
100. Kuo, J. H., Anderson, H. U. and Sparlin, D. M. (1990), Oxidation reduction behavior of undoped and Sr-doped LaMn03 defect structure, electrical conductivity, and thermoelectric power, J. Solid State Chem., 87, 55-63.
101. 3-phosphate glasses in SOFC environment, J. Mater. Sci., 33, 2499-2507.
102. Larsen, P. H. (1999), Sealing Materials for Solid Oxide Fuel Cells, Ph. D. Thesis (Sheffield University, UK), Risø National Laboratory, Roskilde, Denmark.
103. Ley, K. L., Krumplet, M., Kumar, R., Meiser, J. H. and Bloom, I. (1996), Glass-ceramic sealant for SOFC: part-I, physical properties, J. Mater. Res., 11, 1489-1493.
104. Lu, C, Worrell, W. L., Gorte, R. J. and Vohs, J. M. (2003), SOFCs for direct hydrocarbon fuels with samaria-doped ceria electrolyte, J. Electrochem. Soc, 150, A354-A358.
105. Liu, Y., Zhu, S. and Liu, M. (2004), Novel nanostructured electrodes for solid oxide fuel cells fabricated by combustion chemical vapor deposition, Adv. Mater., 16, 256-260.
106. 3 and the ionic conduction, Solid State Ionics, 120, 51-60.
107. 3, J. Alloys Compounds, 329, 253.
108. Magnone, E., Traversa, E. and Miyayama, M. (2005), Synthesis and characterization of strontium and iron-doped lanthanum cobaltite nanocrystaline powders for single chamber solid oxide fuel cells, Ninth International Symposium on Solid Oxide Fuel Cells (SOFC-IX), Eds. S. C. Singhal and J. Mizusaki, pp. 1617-1626. The Electrochemical Soc. Inc., Pennington, NJ, USA.
109. Marina, O. A., Canfield, N. L. and Stevenson, J. W. (2002), Thermal, electrical, and electrochemical properties of lanthanum-doped strontium titanate, Solid State Ionics, 149, 21-28.
110. McEvoy, A. (2003), Anodes, in: High Temperature Solid Oxide Fuel Cells: Fundamentals, design and Applications, Eds. S. C. Singhal and K. Kendall, Elsevier, UK, pp. 149-171.
111. Menzler, N. H., Bram, M., Buchkremer, H. P. and Stover, D. (2003), Development of a gastight sealing material for ceramic components, J. Euro. Ceram. Soc, 23, 445-454.
112. Menzler, N. H., Sebold, D., Zahid, M., Gross, S. M. and Koppitz, T. (2005), Interaction of metallic SOFC interconnect materials with glass-ceramic sealant in various atmospheres, J. of Power Sources., Available online.
113. Meyer, M., Nicoloso, N. and Jaenisch, V. (1997), Percolation model for the anomalous conductivity of fluorite-related oxides, Phys. Rev. B, 56, 5961-66, 1997.
114. Minh, N. Q. and Takahashi, T. (1995), Science and Technology of Ceramic Fuel Cells, Elsevier, Amsterdam.
115. Minh, N. Q. (2004), Solid Oxide fuel cell technology - features and applications, Solid State Ionics, 174, 271-277.
116. Mogensen, M. and Skaarup, S. (1996), Kinetic and geometric aspects of solid oxide fuel cell electrodes, Solid State Ionics, 86-88, 1151-1160.
117. Mogensen, M., Sammes, N. M. and Tompsett, G. A. (2000), Physical, chemical and electrochemical properties of pure and doped ceria, Solid State Ionics, 129:63-94.
118. Mogensen, M., Primdahl, S., Jørgensen, M. J. and Bagger, C. (2000), Composite Electrodes in Solid Oxide Fuel Cells and Similar Solid State Devices, J. Electroceramics, 5:2, 141-152.
119. Moos, R. and Hardtl, K. H. (1997), Defect chemistry of donor-doped and undoped strontium titanate ceramics between 1000° to 1400°C, J. Am. Ceram. Soc, 80, 2549-2562.
120. Mori, M., Yamamoto, T., Itoh, H., Abe, T., Yamamoto, S., Takeda, Y. and Yamamoto, O. (1994), Electrical conductivity of alkaline earth metal (Mg, Ca, Sr) doped lanthanum chromites, First European Solid Oxide fuel Cells Forum, Ed. U. Bossel, pp. 465-473, Lucerne, Switzerland.
121. Mori, M., Yamamoto, T., Itoh, H. and Watanabe, T. (1997), Compatibility of alkaline earth metal (Mg, Ca, Sr)-doped lanthanum chromites as separators in planar-type high-temperature solid oxide fuel cells, J. Mater. Sci., 32, 2423-2431.
122. Mori, M., Hiei, Y. and Yamamoto, T. (2001), Control of the thermal expansion of strontium-doped lanthanum chromite perovskites by B-site doping for high temperature solid oxide fuel cell separators, J. Am. Ceram. Soc, 84, 781-86.
123. Murray, E. P., Tsai, T. and Barnett, S. A. (1999), A direct-methane fuel cell with a ceria-based anode, Nature, 400, 649-651.
124. 1 5x-12 (x = 8-9.33) polycrystals, J. Mater. Sci. Letts., 20, 1627-1629.
125. Nakayama, S. and Sakamoto, M. (1998), Electrical properties of new type high oxide ionic conductor REi0Si6O27 (RE = La, Pr, Nd, Sm, Gd, Nd), J. Euro. Ceram. Soc, 18, 1413-1418.
126. Napporn, T. W., Savoie, S., Roberge, R., Jacques-Bedard, X. and Meunier, M. (2005), Single-chamber SOFC: comparing dry and humidified conditions, Proc. of the ninth international symposium on solid oxide fuel cells (SOFC-IX), Eds., S. C. Singhal and J. Mizusaki, Vol. 1, pp 371-377. The Electrochemical Society Inc., Pennington, NJ, USA.
127. Negishi, H., Sakai, N., Yamaji, K., Horita, T. and Yokokawa, H. (1999), Fabrication of small tubular SOFCs by electrophoretic deposition technique, Proc. of the Sixth International Symposium on Solid Oxide Fuel Cells (SOFC-VI), Eds. S. C. Singhal and M. Dokiya, pp. 885-892, The Electrochemical Soc. Inc., Pennington, NJ, USA.
128. 3 system, Solid State Ionics, 132, 217-226.
129. Ogumi, Z., Ioroi, T., Uchimo, Y. and Tekehara, Z. (1995), Novel method for preparing nickel/cermet by a vapor-phase process, J. Am. Ceram. Soc, 78, 593-598.
130. Pal, U. and Singhal, S. C. (1990), Electrochemical vapor deposition of YSZ, J. Electrochem Soc, 137, 2937-41, 1990.
131. Perednis, D. and Gauckler L. J. (2004), Solid oxide fuel cells with electrolytes prepared via spray pyrolysis, Solid State Ionics, 166, 229-239.
132. Petric, A., Huang, P. and Tietz, F. (2000), Evaluation of La-Sr-Co-0 perovskites for solid oxide fuel cells and gas separation membranes, Solid State Ionics, 135, 719-725.
133. Pratihar, S. K., Das Sharma, A., Basu, R. N. and Maiti, H. S. (2004), Preparation of nickel coated YSZ powder for application as an anode for solid oxide fuel cells, J. Power Sources, 129, 138-142.
134. Pratihar, S. K., Basu, R. N., Mazumder, S. and Maiti, H. S. (1999), Electrical conductivity and microstructure of Ni-YSZ anode prepared by liquid dispersion method, Eds. S. C. Singhal and M. Dokiya, Sixth International Symposium on Solid Oxide Fuel Cells (SOFC-VI). The Electrochemical Soc, Pennington, NJ, USA.
135. Quadakkers, W. J., Piron-Abellan, J., Shemet, V. and Singheiser, L. (2003), Metallic interconnectors for SOFCs-a review, Materials at High Temperatures, 20, 115-127.
136. Ralph, J. M. and Kilner, J. A. (1997), Grainboundary conductivity enhancement in ceria-gadolina solid solution, Proc. of the Fifth International Symposium on Solid Oxide Fuel Cells (SOFC-V), Eds. U. Stimming, S. C. Singhal, H.
137. Tawa and W. Lehnert, pp. 1021-1030, The Electrochemical Society, Pennington, NJ, USA.
138. Ralph, J. M., Kilner, J. A. and Steele, B. C. H. (2000), Improving Gd-doped ceria electrolytes for low temperature SOFC, in New Materials for Batteries and Fuel Cells, Eds. D. H. Doughty, L. F. Nazar, M. Arakawa, H. P. Brack and K. Naoi, MRS Symposium Proc, Vol. 575, pp. 309-314.
139. Ralph, J. M., Schoeler, A. C. and Krumpelt, M. (2001), Materials for lower temperature solid oxide fuel cells, J. Mater. Sci., 36, 1161-1172.
140. Randall, C. A., Van Tassel, J. V., Hitomi, A., Daga, A., Basu, R. N. and Lanagan, M. (2000), Electroceramic device opportunities with electrophoretic deposition, J. Mater. Education, 22, 131-145.
141. Sakai, N., Yokokawa, H., Horita, T. and Yamaji, K. (2004), Lanthanum chromite-based interconnects as key materials for SOFC stack development, Int. J. Appl. Ceram. Technol., 1, 23-30.
142. Sammes, N. M., Tompsett, G. A., Nafe, H. and Aldinger, F. (1999), Bismuth based oxide electrolyte-structure and ionic conductivity, J. Euro. Ceram. Soc, 19, 1801-1826.
143. 26.5, and related titanium doped systems, Proc. of the ninth international symposium on solid oxide fuel cells (SOFC-IX), Eds., S. C. Singhal and J. Mizusaki, Vol. 2, pp. 1156-1164, The Electrochemical Society Inc., Pennington, NJ, USA.
144. Sarkar, P. Rho, H., Liu, M., Yamarte, L and Johanson, L. (2005), High power density tubular SOFC for portable applications, Proc. of the ninth international symposium on solid oxide fuel cells (SOFC-IX), Eds., S. C. Singhal and J. Mizusaki, Vol. 2, pp. 411-418. The Electrochemical Society Inc., Pennington, NJ, USA.
145. Sasaki, K., Wurth, J-P, Gschwend, R., Godickemeier, M. and Gauckler, L. J. (1996), Microstructure-property relations of solid oxide fuel cell cathodes and current collectors-cathode polarization and ohmic resistance, J. Electrochem. Soc. 143, 530-543.
146. Shao, Z. and Haile, S. M. (2004), A high-performance cathode for the next generation of solid-oxide fuel cells, Nature, 431, 170-173.
147. Shima, D. and Haile, S. M. (1997), The influence of cation non-stoichiometry on the properties of undoped and gadolinia-doped barium cerate, Solid State Ionics, 97, 443-455.
148. Sohn, S. B. and Choi, S. Y. (2004), Suitable glass-ceramic sealant for planar solid oxide fuel cells, J. Am. Ceram. Soc, 87, 254-60.
149. Sohn, S. B., Choi, S. Y., Kim, G. H., Song, H. S. and Kim, G. D. (2002), Stable sealing glasses for planar SOFC, J. Noncryst. Solid., 297, 103-12.
150. Simmer, S. P. and Stevenson, J. W. (2001), Compressive mica seals for SOFC applications, J. Power Sources., 102, 310-316.
151. Singhal, S. C. and Kendall, K. (2003) (Editors), High Temperature Solid Oxide Fuel Cells: Fundamentals, design and Applications, Elsevier, UK.
152. 2.825 (1999), J. Solid State Chem., 143, 202-209.
153. 2.85 by powder neutron diffraction, Solid State Ionics, 107, 319-323.
154. Steele, B. C. H. (1993), Materials for electrochemical energy conversion and storage systems, Ceramic International, 19, 269-277.
155. st European SOFC Forum, Ed. U. Bossel, Switzerland, 1994, pp. 375-397.
156. 2-y2 electrolytes for IT-SOFC operation at 500°C, Solid State Ionics, 129:95-110.
157. Stover, D., Diekmann, U., Flesch, U., Kabs, H., Quadakkers, W. J., Tietz, F. and Vinke, I. C. (1999), Proc. of the sixth international symposium on solid oxide fuel cells (SOFC-VI), Eds., S. C. Singhal and M. Dokiya, pp. 812-821. The Electrochemical Society Inc., Pennington, NJ, USA.
158. Stover, D., Buchkremer, H. P. and Huijsmans, J. P. P. (2003), MEA/cell preparation methods: Europe/USA, Handbook of Fuel Cells-Fundamentals, Technology and Applications, Ed. W. Vielstich, H. A. Gasteiger and A. Lamm, Volume 4: Fuel Cell Technology and Applications, pp. 1015-1031. John Wiley & Sons.
159. 2, J. Am. Ceram. Soc, 47, 122-127.
160. Subbarao, E. C. and Maiti, H. S (1984), Solid electrolytes with oxygen ion conduction, Solid State Ionics, 11, 317.
161. Sunde, S. (2000), Simulations of composite electrodes in fuel cells, J. Electroceram., 5, 153-182.
162. Takahashi, T., Esaka, T. and Iwahara, H. (1977), Conduction in bismuth (III) oxide-based oxide ion conductors under low oxygen pressure. I. Current blackening of the bismuth (III) oxide-yttrium oxide electrolyte, J. Appl. Electrochem., 7, 299-302.
163. Taniguchi, S., Kadowaki, M., Yasuo, T., Akiyama, Y, Miyake, Y. and Nishio, K. (2000), Improvement of thermal cycling characteristics of a planar-type solid oxide fuel cell by using ceramic fibre as sealing material, J. Power Sources, 90, 163-69.
164. Tanner, C. W., Fung, K. Z. and Virkar, A. V. (1997), The effect of porous composite electrode structure on solid oxide fuel cell performance, J. Electrochem. Soc, 144, 21-30.
165. 3-x, J. Mater. Chem., 10, 1829-1833.
166. Teller, O., Meulenberg, W. A., Tietz, E, Wessel, E. and Quadakkers, W. J. (2001), Improved material combinations for stacking of solid oxide fuel cells, Proc. of the Seventh International Symposium on Solid Oxide Fuel Cells (SOFC-VII), Eds. H. Yokokawa and S. C. Singhal, pp. 895-903, The Electrochemical Soc, Pennington, NJ, USA.
167. Tietz, F., Buchkremer, H. P. and Stover, D. (2002), Components manufacturing for solid oxide fuel cell, Solid State Ionics, 152-153, 373-381.
168. Tsai, T. and Barnett, S. A. (1997), Increased solid-oxide fuel cell power
169. Tuller, H. L. (1997), Semiconduction and mixed ionic-electronic conduction in nonstoichiometric oxides: impact and control, Solid State Ionics, 94, 63-74.
170. Van Doom, R. H. E., Bouwmeester, H. J. M., Burggraaf, A. J. (1998), Kinetic decomposition of Lao.3Sr0.7Co03-5 perovskite membranes during oxygen permeation, Solid State Ionics, 111, 263-272.
171. Van Gool, W. (1965), The possible use of surface migration in fuel cells and heterogeneous catalysis, Philips Research Report, 20, 81-93.
172. 3 and BaTio.5Zro.5O3 oxides via single-source alkoxide precursors and semi-alkoxide routes, J. Sol-Gel Sci. Technol., 15, 145-158.
173. 2O3 system, J. Electrochem. Soc, 128:75-82.
174. 2 power density and 30 day long-term stability, J. Electrochem. Soc, 152, A1511-A1515.
175. Waschsman, E. D., Ball, G. R., Jiang, N. and Stevenson, D. A. (1992), Structural and defect studies in solid oxide electrolytes, Solid State Ionics, 52, 213-218.
176. Weber, A. and Ivers-Tiffee, E. (2004), Materials and concepts for solid oxide fuel cells (SOFCs) in stationary and mobile applications, J. Power Sources, 127, 273-283.
177. Williams, M. C., Strakey, J. P. and Surdoval, W. A. (2005), U. S. DOE Solid Oxide Fuel Cells: Technical Advances, Proc. of the Ninth International Symposium on Solid Oxide Fuel Cells (SOFC-IX), Eds., S. C. Singhal and J. Mizusaki, Vol. 1, pp 20-31, The Electrochemical Society Inc., Pennington, NJ, USA.
178. Wolfenstine, J., Huang, P. and Petric, A. (1999), Creep behavior of doped lanthanum gallate versus cubic zirconia, Solid State Ionics, 118, 257.
179. Yahiro, H., Ohuchi, T., Eguchi, K. and Arai, H. (1988), Electrical properties and microstructure in the system ceriaalkaline earth oxide, J. Mater. Sci., 23, 1036-1041.
180. 2.δ composite film, Electrochem. and Solid State Letts., 8, A389-A391.
181. Yamaji, K., Negishi, H., Horita, T., Sakai, N. and Yokokawa, H. (2000), Vaporization process of Ga from doped LaGa03 electrolytes in reducing atmospheres. Solid State Ionics, 135, 389-396.
182. Yamamoto, O. (2000), Solid oxide fuel cells: fundamental aspects and prospects, Electrochemica Acta, 45, 2423-2435.
183. Yamamuru, Y, Kawasaki, S. and H. Sakai (1999), Molecular dynamics analysis of ionic conduction mechanism in yttria-stabilized zirconia, Solid State Ionics, 126, 181-89.
184. Yasuda, I., Matsuzaki, Y, Yamakawa, T. and Koyama, T. (2000), Electrical conductivity and mechanical properties of alumina-dispersed doped lanthanum gallates, Solid State Ionics, 135, 381.
185. 3-based interconnect materials, Proc. of the third international symposium of solid oxide fuel cells (SOFC-III). Eds. S. C. Singhal and H. Iwahara, pp. 354-363.
186. Yokokawa, H. and Horita, T. (2003), in High Temperature Solid Oxide Fuel Cells: Fundamentals, Design and Applications, Ed. S. C. Singhal and K. Kendall, Elsevier, UK, pp. 119-147.
187. 3-doped cubic zirconia, Solid State Ionics, 128, 243-54.
188. 3 ceramic glaze as sealant for planar IT-SOFC, J. Power Sources, 128, 165-172
189. Zhu, W. Z. and Deevi, S. C. (2002), Development of interconnect materials for solid oxide fuel cells, Mater. Sci. & Eng., A 348, 227-243.
190. Zhu, W. Z. and Deevi, S. C. (2003), A review on the status of anode materials for solid oxide fuel cells, Mater. Sci. & Eng., A 362, 228-239.
191. Zhu, W. Z. and Deevi S. C. (2003), Opportunity of metallic interconnects for solid oxide fuel cells: a status on contact resistance, Materials Research Bulletin, 38, 957-972.