Simultaneously enhanced cryogenic tensile strength and fracture toughness of epoxy resins by carboxylic nitrile-butadiene nano-rubber

Composites Part A: Applied Science and Manufacturing

Volumn 55, Issue , 2013, Pages 178-187

  Zhao, Yang ^a   Chen, Zhen Kun ^a   Liu, Yu ^a   Xiao, Hong Mei ^a   Feng, Qing Ping ^a   Fu, Shao Yun ^a  

^a TECHNICAL INSTITUTE OF PHYSICS AND CHEMISTRY   (China)

Author keywords

A. Nano composite; A. Polymer matrix composites (PMCs); B. Fracture toughness; B. Mechanical properties

Indexed keywords

CURING AGENTS; DIGLYCIDYL ETHER; FAILURE STRAIN; NITRILE BUTADIENE; POLYMER MATRIX COMPOSITES (PMCS); ROOM TEMPERATURE; SEM OBSERVATION; YOUNG'S MODULUS;

BUTADIENE; CRYOGENICS; CYANIDES; ELASTIC MODULI; EPOXY RESINS; RESINS; RUBBER; STRAIN; TENSILE STRENGTH;

FRACTURE TOUGHNESS;

EID: 84885160432     PISSN: 1359835X     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.compositesa.2013.09.005     Document Type: Article

References (52)

1. M.G. Kim, J.B. Moon, and C.G. Kim Effect of CNT functionalization on crack resistance of a carbon/epoxy composite at a cryogenic temperature Composites Part A-Appl S 43 2012 1620 1627
2. B. Landry, G. LaPlante, and L.R. LeBlanc Environmental effects on mode II fatigue delamination growth in an aerospace grade carbon/epoxy composite Composites Part A-Appl S 43 2012 475 485
3. G. Xu, W. Shi, M. Gong, F. Yu, and J. Feng Curing behavior and toughening performance of epoxy resins containing hyperbranched polyester Polym Adv Technol 15 2004 639 644 (Pubitemid 39594390)
4. L.C. Tang, H. Zhang, S. Sprenger, L. Ye, and Z. Zhang Fracture mechanisms of epoxy-based ternary composites filled with rigid-soft particles Compos Sci Technol 72 2012 558 565
5. T. Jiang, T. Kuila, N.H. Kim, B.-C. Ku, and J.H. Lee Enhanced mechanical properties of silanized silica nanoparticle attached graphene oxide/epoxy composites Compos Sci Technol 79 2013 115 125
6. G. Yang, B. Zheng, J.P. Yang, G.S. Xu, and S.Y. Fu Preparation and cryogenic mechanical properties of epoxy resins modified by poly (ethersulfone) J Polym Sci Part A Pol Chem 46 2008 612 624
7. Z.K. Chen, J.P. Yang, Q.Q. Ni, S.Y. Fu, and Y.G. Huang Reinforcement of epoxy resins with multi-walled carbon nanotubes for enhancing cryogenic mechanical properties Polymer 50 2009 4753 4759
8. S. Nishijima, Y. Honda, S. Tagawa, and T. Okada Study of epoxy resin for cryogenic use by positron annihilation method J Radioanal Nucl Chem 211 1996 93 101 (Pubitemid 27129037)
9. J.P. Yang, G. Yang, G. Xu, and S.Y. Fu Cryogenic mechanical behaviors of MMT/epoxy nanocomposites Compos Sci Technol 67 2007 2934 2940 (Pubitemid 47324216)
10. G. Yang, S.Y. Fu, and J.P. Yang Preparation and mechanical properties of modified epoxy resins with flexible diamines Polymer 48 2007 302 310 (Pubitemid 44932175)
11. H. Yahyaie, M. Ebrahimi, H.V. Tahami, and E.R. Mafi Toughening mechanisms of rubber modified thin film epoxy resins Progr Org Coat 76 2013 286 292
12. M.L. Arias, P.M. Frontini, and R.J.J. Williams Analysis of the damage zone around the crack tip for two rubber-modified epoxy matrices exhibiting different toughenability Polymer 44 2003 1537 1546 (Pubitemid 36222002)
13. G. Tripathi, and D. Srivastava Effect of carboxyl-terminated poly (butadiene- co-acrylonitrile)(CTBN) concentration on thermal and mechanical properties of binary blends of diglycidyl ether of bisphenol-A (DGEBA) epoxy resin Mater Sci Eng A-Struct 443 2007 262 269 (Pubitemid 44763083)
14. F. Huang, Y. Liu, X. Zhang, G. Wei, J. Gao, and Z. Song Effect of elastomeric nanoparticles on toughness and heat resistance of epoxy resins Macromol Rapid Commun 23 2002 786 790
15. R. Pearson, and A. Yee Toughening mechanisms in elastomer-modified epoxies J Mater Sci 24 1989 2571 2580
16. M. Dadfar, and F. Ghadami Effect of rubber modification on fracture toughness properties of glass reinforced hot cured epoxy composites Mater Des 47 2013 16 20
17. N. Chikhi, S. Fellahi, and M. Bakar Modification of epoxy resin using reactive liquid (ATBN) rubber Eur Polym J 38 2002 251 264 (Pubitemid 33039164)
18. J.F. Hwang, J. Manson, R. Hertzberg, G. Miller, and L. Sperling Structure-property relationships in rubber-toughened epoxies Polym Eng Sci 29 1989 1466 1476 (Pubitemid 20609986)
19. D. Verchere, H. Sautereau, J. Pascault, S. Moschiar, C. Riccardi, and R. Williams Rubber-modified epoxies I. Influence of carboxyl-terminated butadiene-acrylonitrile random copolymers (CTBN) on the polymerization and phase separation processes J Appl Polym Sci 41 1990 467 485
20. D. Verchere, J. Pascault, H. Sautereau, S. Moschiar, C. Riccardi, and R. Williams Rubber-modified epoxies IV. Influence of morphology on mechanical properties J Appl Polym Sci 43 1991 293 304 (Pubitemid 21668751)
21. R. Tripathy, U. Ojha, and R. Faust Polyisobutylene modified bisphenol a diglycidyl ether based epoxy resins possessing improved mechanical properties Macromolecules 44 2011 6800 6809
22. R. Thomas, Y.M. Ding, Y.L. He, L. Yang, P. Moldenaers, and W.M. Yang Miscibility, morphology, thermal, and mechanical properties of a DGEBA based epoxy resin toughened with a liquid rubber Polymer 49 2008 278 294
23. T. Ueki, S. Nishijima, and Y. Izumi Designing of epoxy resin systems for cryogenic use Cryogenics 45 2005 141 148
24. T. Ueki, K. Nojima, K. Asano, S. Nishijima, and T. Okada Toughening of epoxy resin systems for cryogenic use Adv Cryog Eng 44 1998 277 283
25. A. Idesaki, N. Koizumi, M. Sugimoto, N. Morishita, T. Ohshima, and K. Okuno Gas evolution from insulating materials for superconducting coil of ITER by gamma ray irradiation at liquid nitrogen temperature Aip Conf Proc 986 2008 169 173
26. R. Prokopec, K. Humer, R. Maix, H. Fillunger, and H. Weber Mechanical strength of various cyanate ester/epoxy insulation systems after fast neutron irradiation to the ITER design fluence and beyond Fusion Eng Des 82 2007 1508 1512 (Pubitemid 47532512)
27. R. Prokopec, K. Humer, and H. Weber Fatigue behavior of an insulation system for the ITER magnets in the load and strain controlled mode Fusion Eng Des 82 2007 1396 1399 (Pubitemid 47532462)
28. F. Huang, Y.Q. Liu, X.H. Zhang, J.M. Gao, Z.H. Song, and B.H. Tang Interface and properties of epoxy resin modified by elastomeric nano-particles Sci China Ser B 48 2005 148 155 (Pubitemid 40710452)
29. G.C. Qi, X.H. Zhang, B.H. Li, Z.H. Song, and J.L. Qiao The study of rubber-modified plastics with higher heat resistance and higher toughness and its application Polym Chem-UK 2 2011 1271 1274
30. M.F. Zeng, X.D. Sun, H.Q. Xiao, G.Z. Ji, X.W. Jiang, and B.Y. Wang Investigation of free volume and the interfacial, and toughening behavior for epoxy resin/rubber composites by positron annihilation Radiat Phys Chem 77 2008 245 251
31. J.P. Yang, Z.K. Chen, G. Yang, S.Y. Fu, and L. Ye Simultaneous improvements in the cryogenic tensile strength, ductility and impact strength of epoxy resins by a hyperbranched polymer Polymer 49 2008 3168 3175
32. J.P. Yang, Z.K. Chen, Q.P. Feng, Y.H. Deng, Y. Liu, and Q.Q. Ni Cryogenic mechanical behaviors of carbon nanotube reinforced composites based on modified epoxy by poly(ethersulfone) Composites Part B-Eng 43 2012 22 26
33. B.C. Kim, S.W. Park, and D.G. Lee Fracture toughness of the nano-particle reinforced epoxy composite Compos Struct 86 2008 69 77
34. Y.S. Song, and J.R. Youn Influence of dispersion states of carbon nanotubes on physical properties of epoxy nanocomposites Carbon 43 2005 1378 1385 (Pubitemid 40584255)
35. Y. Zhao, J.H. Qiu, H.X. Feng, M. Zhang, L. Lei, and X.L. Wu Improvement of tensile and thermal properties of poly(lactic acid) composites with admicellar-treated rice straw fiber Chem Eng J 173 2011 659 666
36. Supri, and H. Ismail Effects of dynamic vulcanization and glycidyl methacrylate on properties of recycled poly(vinyl chloride)/acrylonitrile butadiene rubber blends Polym Test 25 2006 318 326
37. H. Ismail, D. Galpaya, and Z. Ahmad The compatibilizing effect of epoxy resin (EP) on polypropylene (PP)/recycled acrylonitrile butadiene rubber (NBRr) blends Polym Test 28 2009 363 370
38. S. Nishijima, Y. Honda, and T. Okada Application of the positron annihilation method for evaluation of organic materials for cryogenic use Cryogenics 35 1995 779 781
39. 2 on the performance of nanocomposites Mater Lett 57 2003 2940 2944
40. R.L. Fan, Y. Zhang, F. Li, Y.X. Zhang, K. Sun, and Y.Z. Fan Effect of high-temperature curing on the crosslink structures and dynamic mechanical properties of gum and N330-filled natural rubber vulcanizates Polym Test 20 2001 925 936 (Pubitemid 32833606)
41. U.K. Mandal, D.K. Tripathy, and S.K. De Dynamic mechanical spectroscopic studies on plasticization of an ionic elastomer based on carboxylated nitrile rubber Polymer 37 1996 3437 3440 (Pubitemid 126406799)
42. A. Bendahou, H. Kaddami, and A. Dufresne Investigation on the effect of cellulosic nanoparticles' morphology on the properties of natural rubber based nanocomposites Eur Polym J 46 2010 609 620
43. M.A. Elrehim, B. Voit, B. Bruchmann, K.J. Eichhorn, K. Grundke, and C. Bellmann Structural and end-group effects on bulk and surface properties of hyperbranched poly(urea urethane)s J Polym Sci Part A Pol Chem 43 2005 3376 3393 (Pubitemid 41343549)
44. P.M. Stefani, S.M. Moschiar, and M.I. Aranguren Polyurethane-ductilized epoxy resins J Appl Polym Sci 68 1998 1781 1789 (Pubitemid 128567053)
45. S.Y. Fu, X.Q. Feng, B. Lauke, and Y.W. Mai Effects of particle size, particle/matrix interface adhesion and particle loading on mechanical properties of particulate-polymer composites Composites Part B-Eng 39 2008 933 961
46. S.H. Yoon, J.G. Kim, Y.J. Hwang, and D.G. Lee Fracture toughness measurement of adhesively bonded joints at cryogenic temperatures J Adhes Sci Technol 26 2012 987 1001
47. S.C. Kwon, T. Adachi, and W. Araki Temperature dependence of fracture toughness of silica/epoxy composites: related to microstructure of nano-and micro-particles packing Composites Part B-Eng 39 2008 773 781
48. C.B. Bucknall Toughened plastics 1977 Applied Science Publishers Ltd.
49. L. Ruiz-Perez, G.J. Royston, J.P.A. Fairclough, and A.J. Ryan Toughening by nanostructure Polymer 49 2008 4475 4488
50. A.C. Garg, and Y.W. Mai Failure mechanisms in toughened epoxy-resins-a review Compos Sci Technol 31 1988 179 223
51. H.R. Azimi, R.A. Pearson, and R.W. Hertzberg Fatigue of rubber-modified epoxies: effect of particle size and volume fraction J Mater Sci 31 1996 3777 3789 (Pubitemid 126708819)
52. B. Lauke, and S.Y. Fu Aspects of fracture toughness modelling of particle filled polymer composites Composites Part B-Eng 45 2013 1569 1574