Steel showing twinning-induced plasticity processed by selective laser melting - An additively manufactured high performance material

Materials Characterization

Volumn 85, Issue , 2013, Pages 57-63

  Niendorf, T ^a   Brenne, F ^a,b  

^a UNIVERSITY OF PADERBORN   (Germany)

^b Direct Manufacturing Research Center (DMRC)   (Germany)

Author keywords

Additive manufacturing; High manganese steel; Mechanical properties; Microstructure; Strength and ductility

Indexed keywords

ADDITIVE MANUFACTURING; AUSTENITIC MICROSTRUCTURE; HIGH PERFORMANCE MATERIAL; HIGH-MANGANESE STEELS; MICROSTRUCTURAL ANALYSIS; SELECTIVE LASER MELTING; STRENGTH AND DUCTILITIES; TWINNING-INDUCED PLASTICITIES;

DUCTILITY; HIGH STRENGTH STEEL; MECHANICAL PROPERTIES; MICROSTRUCTURE; STRAIN HARDENING; TENSILE TESTING;

PLASTICITY;

EID: 84884837089     PISSN: 10445803     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.matchar.2013.08.010     Document Type: Article

References (30)

1. T. Wohlers Wohlers Report 2012: additive manufacturing and 3D printing state of the industry - annual worldwide progress report 2012 Wohlers Associates, Inc. Colorado
2. L.E. Murr, S.M. Gaytan, D.A. Ramirez, E. Martinez, J. Hernandez, and K.N. Amato Metal fabrication by additive manufacturing using laser and electron beam melting technologies J Mater Sci Technol 28 2012 1 14
3. C. Emmelmann, P. Sander, J. Kranz, and E. Wycisk Laser additive manufacturing and bionics: redefining lightweight design Physics Procedia 12 2011 364 368
4. E. Brandl, B. Baufeld, C. Leyens, and R. Gault Additive manufactured Ti-6Al-4V using welding wire: comparison of laser and arc beam deposition and evaluation with respect to aerospace material specifications Physics Procedia 5 B 2010 595 606
5. X.Y. Cheng, S.J. Li, L.E. Murr, Z.B. Zhang, Y.L. Hao, and R. Yang Compression deformation behavior of Ti-6Al-4V alloy with cellular structures fabricated by electron beam melting J Mech Behav Biomed Mater 16 2012 153 162
6. B. Baufeld, O. van der Biest, and R. Gault Additive manufacturing of Ti-6Al-4V components by shaped metal deposition: microstructure and mechanical properties Mater Des 31 2010 106 111
7. L. Thijs, K. Kempen, J.P. Kruth, and J. Van Humbeeck Fine-structured aluminium products with controllable texture by selective laser melting of pre-alloyed AlSi10Mg powder Acta Mater 61 2013 1809 1819
8. T. Niendorf, S. Leuders, A. Riemer, H.A. Richard, T. Tröster, and D. Schwarze Highly anisotropic steel processed by selective laser melting Metall Mater Trans B 44 2013 794 796
9. S. Leuders, M. Thöne, A. Riemer, T. Niendorf, T. Tröster, and H.A. Richard On the mechanical behaviour of titanium alloy TiAl6V4 manufactured by selective laser melting: fatigue resistance and crack growth performance Int J Fatigue 48 2013 300 307
10. B. Gorny, T. Niendorf, J. Lackmann, M. Thoene, T. Troester, and H.J. Maier In situ characterization of the deformation and failure behavior of non-stochastic porous structures processed by selective laser melting Mater Sci Eng A 528 2011 7962 7967
11. M. Shiomi, K. Osakada, K. Nakamura, T. Yamashita, and F. Abe Residual stress within metallic model made by selective laser melting process CIRP Ann Manuf Technol 1 2004 195 198
12. M. Badrossamay, and T.H.C. Childs Further studies in selective laser melting of stainless and tool steel powders Int J Mach Tools Manuf 47 2007 779 784 (Pubitemid 46162110)
13. E. Yasa, and J.P. Kruth Microstructural investigation of selective laser melting 316L stainless steel parts exposed to laser re-melting Procedia Eng 19 2011 389 395
14. K.N. Amato, S.M. Gaytan, L.E. Murr, E. Martinez, P.W. Shindo, and J. Hernandez Microstructures and mechanical behavior of Inconel 718 fabricated by selective laser melting Acta Mater 60 2012 2229 2239
15. D. Buchbinder, H. Schleifenbaum, S. Heidrich, W. Meiners, and J. Bültmann High power selective laser melting (HP SLM) of aluminum parts Physics Procedia 12 2011 271 278
16. B. Vrancken, L. Thijs, J.P. Kruth, and J. van Humbeeck Heat treatment of Ti6Al4V produced by selective laser melting: microstructure and mechanical properties J Alloys Compd 541 2012 177 185
17. B. Song, S. Dong, B. Zhang, H. Liao, and C. Coddet Effects of processing parameters on microstructure and mechanical property of selective laser melted Ti6Al4V Mater Des 35 2012 120 125
18. O. Grässel, L. Krüger, G. Frommeyer, and L.W. Meyer High strength Fe-Mn-(Al, Si) TRIP/TWIP steels development - properties - application Int J Plast 16 2000 1391 1409
19. O. Bouaziz, S. Allain, C.P. Scott, P. Cugy, and D. Barbier High manganese austenitic twinning induced plasticity steels: a review of the microstructure properties relationships Curr Opin Solid State Mater Sci 15 2011 141 168
20. I. Gutierrez-Urrutia, and D. Raabe Grain size effect on strain hardening in twinning-induced plasticity steels Scr Mater 66 2012 992 996
21. T. Niendorf, C. Lotze, D. Canadinc, A. Frehn, and H.J. Maier The role of monotonic pre-deformation on the fatigue performance of a high-manganese austenitic TWIP steel Mater Sci Eng A 499 2009 518 524
22. H. Beladi, I.B. Timokhina, Y. Estrin, J. Kim, B.C. De Cooman, and S.K. Kim Orientation dependence of twinning and strain hardening behaviour of a high manganese twinning induced plasticity steel with polycrystalline structure Acta Mater 59 2011 7787 7799
23. A. Saeed-Akbari, J. Imlau, U. Prahl, and W. Bleck Derivation and variation in composition-dependent stacking fault energy maps based on subregular solution model in high-manganese steels Metall Mater Trans A 40A 2009 3076 3090
24. L. Mujica, S. Weber, H. Pinto, C. Thomy, and F. Vollertsen Microstructure and mechanical properties of laser-welded joints of TWIP and TRIP steels Mater Sci Eng A 527 2010 2071 2078
25. T. Niendorf, C.J. Rüsing, A. Frehn, and H.J. Maier The deformation behavior of functionally graded TWIP steel under monotonic loading at ambient temperature Mater Res Lett 1 2013 96 101
26. T. Niendorf, F. Brenne, C. Liu, and O. Ozcan In-situ characterization of the damage evolution in thin polyelectrolyte films on TWIP steel substrates Mater Sci Eng A 566 2013 82 89
27. T. Niendorf, F. Rubitschek, H.J. Maier, J. Niendorf, H.A. Richard, and A. Frehn Fatigue crack growth - microstructure relationships in a high-manganese austenitic TWIP steel Mater Sci Eng A 527 2010 2412 2417
28. J.S. Kallend, U.F. Kocks, A.D. Rollet, and H.R. Wenk Operational texture analysis Mater Sci Eng A A132 1991 1 11 (Pubitemid 21654430)
29. I. Gutierrez-Urrutia, and D. Raabe The effect of grain size and grain orientation on deformation twinning in a Fe - 22 wt.% Mn - 0.6 wt.% C TWIP steel Mater Sci Eng A 527 2010 3552 3560
30. C.J. Rüsing, T. Niendorf, J. Lackmann, A. Frehn, and H.J. Maier Microstructure-deformation relationships in fine grained high manganese TWIP steel - the role of local texture Int J Mater Res 103 2012 12 16