The deformation behavior of functionally graded TWIP Steel under monotonic loading at ambient temperature

Materials Research Letters

Volumn 1, Issue 2, 2013, Pages 96-101

  Niendorf, T ^a   Rusing C J ^a   Frehn, A ^b   Maier, H J ^a  

^a UNIVERSITY OF PADERBORN   (Germany)

^b Benteler AG   (Germany)

Author keywords

Digital Image Correlation; High Manganese Steel; Microstructure; Recrystallization; Strain Gradients

Indexed keywords

EID: 84962744198     PISSN: None     EISSN: 21663831     Source Type: Journal    
DOI: 10.1080/21663831.2013.782075     Document Type: Article

References (29)

1. Naderi, M, Uthaisangsuk, V, Prahl, U, and Bleck, W. 2008. A numerical and experimental investigation into hot stamping of boron alloyed heat treated steels. Steel Res Int., 79(2):77–84.
2. Bleck, W, Papaefthymiou, S, and Frehn, A. 2004. Microstructure and tensile properties in dual phase and trip steels. Steel Res Int., 75(11):704–710.
3. Diekmann, U, Säuberlich, T, and Frehn, A. 2007. Air hardened and tempered high strength steels for more crash safety:alloy concepts, characteristics and applications. ATZ Automobiltechnische Zeitschrift., 109(12):1128–1135.
4. Brungs, D. 1997. Light weight design with light metal castings. Mater Design., 18(4–6):285–291. (doi:10.1016/S0261-3069(97)00065-4)
5. Holbery, J, and Houston, D. 2006. Natural-fiber-reinforced polymer composites in automotive applications. JOM., 58(11):80–86. (doi:10.1007/s11837-006-0234-2)
6. Grässel, O, Krüger, L, Frommeyer, G, and Meyer, L W. 2000. High strength Fe-Mn-(Al, Si) TRIP/TWIP steels development—properties—application. Int J Plast., 16(10):1391–1409. (doi:10.1016/S0749-6419(00)00015-2)
7. Frommeyer, G, Brüx, U, and Neumann, P. 2003. Supra-ductile and high-strength manganese-TRIP/TWIP steels for high energy absorption purposes. ISIJ Int., 43(3):438–446. (doi:10.2355/isijinternational.43.438)
8. Bouaziz, O, Allain, S, Scott, C P, Cugy, P, and Barbier, D. 2011. High manganese austenitic twinning induced plasticity steels:a review of the microstructure properties relationships. Curr Opin Solid State Mater Sci., 15(4):141–168. (doi:10.1016/j.cossms.2011.04.002)
9. Beladi, H, Timokhina, I B, Estrin, Y, Kim, J, De Cooman, B C, and Kim, S K. 2011. Orientation dependence of twinning and strain hardening behaviour of a high manganese twinning induced plasticity steel with polycrystalline structure. Acta Mater., 59(20):7787–7799. (doi:10.1016/j.actamat.2011.08.031)
10. Gutierrez-Urrutia, I, and Raabe, D. 2012. Grain size effect on strain hardening in twinning-induced plasticity steels. Scripta Mater., 66(12):992–996. (doi:10.1016/j.scriptamat.2012.01.037)
11. Renard, K, and Jacques, P J. 2012. On the relationship between work hardening and twinning rate in TWIP steels. Mater Sci Eng A., 542:8–14. (doi:10.1016/j.msea.2012.01.123)
12. Bouaziz, O, Allain, S, and Scott, C. 2008. Effect of grain and twin boundaries on the hardening mechanisms of twinning-induced plasticity steels. Scripta Mater., 58(6):484–487. (doi:10.1016/j.scriptamat.2007.10.050)
13. Saeed-Akbari, A, Imlau, J, Prahl, U, and Bleck, W. 2009. Derivation and variation in composition-dependent stacking fault energy maps based on subregular solution model in high-manganese steels. Metall Mater Trans A:Phys Metall Mater Sci., 40(13):3076–3090. (doi:10.1007/s11661-009-0050-8)
14. Merklein, M, and Geiger, M., 2002. New materials production technologies for innovative lightweight constructions. J Mater Process Technol., 125–126:532–536. (doi:10.1016/S0924-0136(02)00312-6)
15. Pallett, R J, and Lark, R J. 2001. The use of tailored blanks in the manufacture of construction components. J Mater Process Technol., 117(1–2):249–254. (doi:10.1016/S0924-0136(01)01124-4)
16. Kantidis, E, Marini, B, and Pineau, A. 1994. Criterion for intergranular brittle fracture of a low alloy steel. Fatigue Fract Eng Mater Struct., 17(6):619–633. (doi:10.1111/j.1460-2695.1994.tb00261.x)
17. Niendorf, T, Rubitschek, F, Maier, H J, Niendorf, J, Richard, H A, and Frehn, A. 2010. Fatigue crack growth—microstructure relationships in a high-manganese austenitic TWIP steel. Mater Sci Eng A., 527(9):2412–2417. (doi:10.1016/j.msea.2009.12.012)
18. Niendorf, T, Dadda, J, Canadinc, D, Maier, H J, and Karaman, I. 2009. Monitoring the fatigue-induced damage evolution in ultrafine-grained interstitial-free steel utilizing digital image correlation. Mater Sci Eng A., 517(1–2):225–234. (doi:10.1016/j.msea.2009.04.053)
19. Niendorf, T, Burs, C, Canadinc, D, and Maier, H J. 2009. Early detection of crack initiation sites in TiAl alloys during low-cycle fatigue at high temperatures utilizing digital image correlation. Int J Mater Res., 100(4):603–608. (doi:10.3139/146.110064)
20. Bracke, L, Verbeken, K, and Kestens, L AI. 2012. Texture generation and implications in TWIP steels. Scripta Mater., 66(12):1007–1011. (doi:10.1016/j.scriptamat.2012.02.048)
21. Dini, G, Najafizadeh, A, Ueji, R, and Monir-Vaghefi, S M. 2010. Improved tensile properties of partially recrystallized submicron grained TWIP steel. Mater Lett., 64(1):15–18. (doi:10.1016/j.matlet.2009.09.057)
22. Kang, S, Jung, Y S, Jun, J H, and Lee, Y K. 2010. Effects of recrystallization annealing temperature on carbide precipitation, microstructure, and mechanical properties in Fe-18Mn-0.6C-1.5Al TWIP steel. Mater Sci Eng A., 527(3):745–751. (doi:10.1016/j.msea.2009.08.048)
23. Liu, J B, Liu, X H, Liu, W, Zeng, Y W, and Shu, K Y. 2010. Microstructure and hardness evolution during isothermal process at 700°C for Fe-24Mn-0.7Si-1.0Al TWIP steel. Mater Charact., 61(12):1356–1358. (doi:10.1016/j.matchar.2010.09.007)
24. Bouaziz, O, Scott, C P, and Petitgand, G. 2009. Nanostructured steel with high work-hardening by the exploitation of the thermal stability of mechanically induced twins. Scripta Mater., 60(8):714–716.
25. Bouaziz, O, Barbier, D, Cugy, P, and Petitgand, G. 2012. Effect of process parameters on a metallurgical route providing nano-structured single phase steel with high work-hardening. Adv Eng Mater., 14(1–2):49–51. (doi:10.1002/adem.201100164)
26. Niendorf, T, Lotze, C, Canadinc, D, Frehn, A, and Maier, H J. 2009. The role of monotonic pre-deformation on the fatigue performance of a high-manganese austenitic TWIP steel. Mater Sci Eng A., 499(1–2):518–524. (doi:10.1016/j.msea.2008.09.033)
27. Niendorf, T, Klimala, P, Maier, H J, and Frehn, A. 2012. The role of notches on fatigue life of TWIP steel in the HCF regime. Mater Sci Forum., 706–709:2205–2210. (doi:10.4028/www.scientific.net/MSF.706-709.2205)
28. Park, I J, Jeong, K H, Jung, J G, Lee, C S, and Lee, Y K. 2012. The mechanism of enhanced resistance to the hydrogen delayed fracture in Al-added Fe–18Mn–0.6C twinning-induced plasticity steels. Int J Hydrog Energy., 37:9925–9932. (doi:10.1016/j.ijhydene.2012.03.100)
29. Koyama, M, Akiyama, E, and Tsuzaki, K. 2012. Hydrogen-induced delayed fracture of a Fe–22Mn–0.6C steel pre-strained at different strain rates. Scripta Mater., 66(11):947–950. (doi:10.1016/j.scriptamat.2012.02.040)