Reactor Design for Fuel Processing

Fuel Cells: Technologies for Fuel Processing

Volumn , Issue , 2011, Pages 451-516

  Ilsen Onsan Z ^a   Avci, Ahmet K ^a  

^a BOGAZICI UNIVERSITY   (Turkey)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 84884428899     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1016/B978-0-444-53563-4.10014-8     Document Type: Chapter

References (251)

1. S. Ahmed and M. Krumpelt (2001) Hydrogen from hydrocarbon fuels for fuel cells. Int J Hydrogen Energy 26 291-301.
2. J.R. Rostrup-Nielsen (1984) Catalytic steam reforming. J.R. Anderson, M. Boudart (Eds) Catalysis, science & technology Berlin: Springer-Verlag 1-117.
3. J.R. Rostrup-Nielsen and J.H.B. Hansen (1993) CO2-reforming of methane over transition metals. J Catal 144 38-49.
4. D.L. Trimm and Z.I. Onsan (2001) Onboard fuel conversion for hydrogen-fuel-cell-driven vehicles. Cat Rev Sci Eng 43 31-84.
5. D.A. Hickman and L.D. Schmidt (1993) Production of syngas by direct catalytic oxidation of methane. Science 259 343-346.
6. P.M. Torniainen, X. Chu and L.D. Schmidt (1994) Comparison of monolith-supported metals for the direct oxidation of methane to syngas. J Catal 176 1-10.
7. M. Fichtner, J. Mayer, D. Wolf and K. Schubert (2001) Microstructured rhodium catalysts for the partial oxidation of methane to syngas under pressure. Ind Eng Chem Res 40 3475-3483.
8. B.C. Enger, J. Walmsley, E. Bjørgum, R. Lødeng, P. Pfeifer, K. Schubert, et al. (2008) Performance and SEM characterization of Rh impregnated microchannel reactors in the catalytic partial oxidation of methane and propane. Chem Eng J 144 489-501.
9. S. Golunski (1998) Hotspot fuel processor. Platinum Metals Rev 42 2-7.
10. Z.I. Onsan (2007) Catalytic processes for clean hydrogen production from hydrocarbon. Turk J Chem 31 531-550.
11. K. Aasberg-Petersen, T.S. Christensen, I. Dybkjaer, J. Sehested, M. Ostberg, R.M. Coertzen, et al. (2004) Synthesis gas production for FT synthesis. A.P. Steynberg, M.E. Dry (Eds) Fischer-Tropsch technology Amsterdam: Elsevier 258-405.
12. A.K. Avci, Z.I. Onsan and D.L. Trimm (2001) On-board fuel conversion for hydrogen fuel cells: comparison of different fuels by computer simulations. Appl Catal A: Gen 216 243-256.
13. D.L. Trimm (1999) Catalysts for the control of coking during steam reforming. Catal Today 49 3-10.
14. F. Joensen and J.R. Rostrup-Nielsen (2002) Conversion of hydrocarbons and alcohols for fuel cells. J Power Sources 105 195-201.
15. T.J. Remans, G. Jenzer and A. Hoek (2008) G. Ertl, H. Knözinger, F. Schüth, J. Weitkamp (Eds) Handbook of heterogeneous catalysis Weinheim: Wiley-VCH 2994-3010.
16. O. Tan, E. Masalaci, Z.I. Onsan and A.K. Avci (2008) Design of a methane processing system producing high-purity hydrogen. Int J Hydrogen Energy 33 5516-5526.
17. J.R. Rostrup-Nielsen (1998) Syngas for C1-chemistry: limits of the steam reforming process. D.M. Bibby, C.D. Chang, R.F. Howe, S. Yurchak (Eds) Methane conversion Amsterdam: Elsevier 73-78.
18. Y. Wang, Y.H. Chin, R.T. Rozmiarek, B.R. Johnson, Y. Gao, J. Watson, et al. (2004) Highly active and stable Rh/MgO-Al2O3 catalysts for methane steam reforming. Catal Today 98 575-581.
19. T. Borowiecki, A. Golebiowski and B. Stasinska (1997) Effects of small MoO3 additions on the properties of nickel catalysts for the steam reforming of hydrocarbons. Appl Catal A: Gen 153 141-156.
20. T. Horiuchi, K. Sakuma, T. Fukui, Y. Kubo, T. Osaki and T. Mori (1996) Suppression of carbon deposition in the CO2-reforming of CH4 by adding basic metal oxides to a Ni/Al2O3 catalyst. Appl Catal A: Gen 144 111-120.
21. Ma L. Ph.D. Thesis, University of New South Wales, 1995.
22. A.K. Avci, D.L. Trimm, A.E. Aksoylu and Z.I. Onsan (2004) Hydrogen production by steam reforming of n-butane over supported Ni and Pt-Ni catalysts. Appl Catal A: Gen 258 235-240.
23. X. Wang and R.J. Gorte (2001) Steam reforming of n-butane on Pd/ceria. Catal Lett 73 15-19.
24. G. Kolb, R. Zapf, V. Hessel and H. Löwe (2004) Propane steam reforming in micro-channels – results from catalyst screening and optimisation. Appl Catal A: Gen 277 155-166.
25. D.A. Hickman and L.D. Schmidt (1992) Synthesis gas formation by direct oxidation of methane over Pt monoliths. J Catal 138 267-282.
26. A.S. Bodke, S.S. Bharadwaj and L.D. Schmidt (1998) The effect of ceramic supports on partial oxidation of hydrocarbons over noble metal coated monoliths. J Catal 179 138-149.
27. K.L. Hohn and L.D. Schmidt (2001) Partial oxidation of methane to syngas at high space velocities over Rh-coated spheres. Appl Catal A: Gen 211 53-68.
28. G. Veser (2008) Short contact-time reactors. G. Ertl, H. Knözinger, F. Schüth, J. Weitkamp (Eds) Handbook of heterogeneous catalysis Weinheim: Wiley-VCH 2174-2188.
29. F. Basile, G. Fornasari, F. Trifiro and A. Vaccari (2001) Partial oxidation of methane: effect of reaction parameters and catalyst composition on the thermal profile and heat distribution. Catal Today 64 21-30.
30. Y. Boucouvalas, Z.L. Zhang and X.E. Verykios (1996) Partial oxidation of methane to synthesis gas via the direct reaction scheme over Ru/TiO2 catalyst. Catal Lett 40 189-195.
31. D. Dissanayake, M.P. Rosynek, K.C.C. Kharas and J.H. Lunsford (1991) Partial oxidation of methane to carbon monoxide and hydrogen over a Ni/Al2O3 catalyst. J Catal 132 117-127.
32. V.A. Tsipouriari, Z. Zhang and X.E. Verykios (1998) Catalytic partial oxidation of methane to synthesis gas over Ni-based catalysts. J Catal 179 283-291.
33. F. van Looij and J.W. Geus (1997) Nature of the active phase of a nickel catalyst during the partial oxidation of methane to synthesis gas. J Catal 168 154-163.
34. K. Nakagawa, N. Ikenaga, Y. Teng, T. Kobayashi and T. Suzuki (1999) Transient response of catalyst bed temperature in pulsed reaction of partial oxidation of methane to synthesis gas over supported rhodium and iridium catalysts. J Catal 186 405-413.
35. M. Huff, P.M. Torniainen and L.D. Schmidt (1994) Partial oxidation of alkanes over noble metal coated monoliths. Catal Today 21 113-128.
36. R.J. Bass, T.M. Dunn, Y.C. Lin and K.L. Hohn (2008) Syngas production from catalytic partial oxidation of n-butane: comparison between incipient wetness and sol-gel prepared Pt/Al2O3. Ind Eng Chem Res 47 7184-7189.
37. I. Aartun, T. Gjervan, H. Venvik, O. Görke, O. Pfeifer, M. Fathi, et al. (2004) Catalytic conversion of propane to hydrogen in microstructured reactors. Chem Eng J 101 93-99.
38. I. Aartun, H.J. Venvik, A. Holmen, P. Pfeifer, O. Görke and K. Schubert (2005) Temperature profiles and residence time effects during catalytic partial oxidation and oxidative steam reforming of propane in metallic microchannel reactors. Catal Today 110 98-107.
39. H. Pennemann, V. Hessel, G. Kolb, H. Löwe and R. Zapf (2008) Partial oxidation of propane using micro structured reactors. Chem Eng J 135S S66-S73.
40. L. Ma, D.L. Trimm and C. Jiang (1996) The design and testing of an autothermal reactor for the conversion of the light hydrocarbons to hydrogen I. The kinetics of the catalytic oxidation of light hydrocarbons. Appl Catal A: Gen 138 275-283.
41. M.V. Twigg (1989) Catalyst handbook. 2nd ed. London: Wolfe Publishing Ltd
42. L. Kiwi-Minsker and A. Renken (2005) Microstructured reactors for catalytic reactions. Catal Today 110 2-14.
43. G. Kolb and V. Hessel (2004) Micro-structured reactors for gas phase reactions. Chem Eng J 98 1-38.
44. L. Ma and D.L. Trimm (1996) Alternative catalyst bed configurations for the autothermic conversion of methane to hydrogen. Appl Catal A: Gen 138 265-273.
45. C. Jiang, D.L. Trimm and M.S. Wainwright (1995) New technology for hydrogen production by the catalytic oxidation and steam reforming of methanol at low temperatures. Chem Eng Technol 18 1-6.
46. A.K. Avci, D.L. Trimm and Z.I. Onsan (2002) Quantitative investigation of catalytic natural gas conversion for hydrogen fuel cell applications. Chem Eng J 90 77-87.
47. E. Orücü, M. Karakaya, A.K. Avci and Z.I. Onsan (2005) Investigation of ethanol conversion for hydrogen fuel cells using computer simulations. J Chem Technol Biotechnol 80 1103-1110.
48. A.K. Avci, Z.I. Onsan and D.L. Trimm (2003) On-board hydrogen generation for fuel cell-powered vehicles: the use of methanol and propane. Top Catal 22 359-367.
49. B.S. Caglayan, A.K. Avci, Z.I. Onsan and A.E. Aksoylu (2005) Production of hydrogen over bimetallic Pt–Ni/δ-Al2O3 I. Indirect partial oxidation of propane. Appl Catal A: Gen 280 181-188.
50. L. Pino, A. Vita, F. Cipiti, M. Lagana and V. Recupero (2006) Performance of Pt/CeO2 catalyst for propane oxidative steam reforming. Appl Catal A: Gen 306 68-77.
51. H.J. Lee, Y.S. Lim, N.C. Park and Y.C. Kim (2009) Catalytic autothermal reforming of propane over the noble metal-doped hydrotalcite-type catalysts. Chem Eng J 146 295-301.
52. B. Silberova, H.J. Venvik and A. Holmen (2005) Production of hydrogen by short contact time partial oxidation and oxidative steam reforming of propane. Catal Today 99 69-76.
53. K. Sato, K. Nagaoka, H. Nishiguchi and Y. Takita (2009) n-C4H10 autothermal reforming over MgO-supported base metal catalysts. Int J Hydrogen Energy 34 333-342.
54. F. Gokaliler, B.S. Caglayan, Z.I. Onsan and A.E. Aksoylu (2008) Hydrogen production by autothermal reforming of LPG for PEM fuel cell applications. Int J Hydrogen Energy 33 1383-1391.
55. B.S. Caglayan, Z.I. Onsan and A.E. Aksoylu (2005) Production of hydrogen over bimetallic Pt-Ni/δ-Al2O3: II. Indirect partial oxidation of LPG. Catal Lett 102 63-67.
56. J.R. Rostrup-Nielsen (1997) Industrial relevance of coking. Catal Today 37 225-232.
57. J. Pasel, J. Meissner, Z. Pors, C. Palm, P. Cremer, R. Peters, et al. (2004) Hydrogen production via autothermal reforming of diesel fuel. Fuel Cells 4 225-230.
58. Z. Pors, J. Pasel, A. Tschauder, R. Dahl, R. Peters and D. Stolten (2008) Optimised mixture formation for diesel fuel processing. Fuel Cells 2 129-137.
59. B. Lindström, J.A.J. Karlsson, P. Ekdunge, L. De Verdier, B. Häggendal, J. Dawody, et al. (2009) Diesel fuel reformer for automotive fuel cell applications. Int J Hydrogen Energy 34 3367-3381.
60. J.P. Kopasz, D. Applegate, L. Miller, H.K. Liao and S. Ahmed (2005) Unraveling the maze: understanding of diesel reforming through the use of simplified fuel blends. Int J Hydrogen Energy 30 1243-1250.
61. M. Nilsson, X. Karatzas, B. Lindström and L.J. Pettersson (2008) Assessing the adaptability to varying fuel supply of an autothermal reformer. Chem Eng J 142 309-317.
62. J.J. Krummenacher, K.N. West and L.D. Schmidt (2003) Catalytic partial oxidation of higher hydrocarbons at millisecond contact times: decane, hexadecane, and diesel fuel. J Catal 215 332-343.
63. R. Subramanian, G.J. Panuccio, J.J. Krummenacher, I.C. Lee and L.D. Schmidt (2004) Catalytic partial oxidation of higher hdrocarbons: reactivities and selectivities of mixtures. Chem Eng Sci 59 5501-5507.
64. R. Peters (2008) Fuel processors. G. Ertl, H. Knözinger, F. Schüth, J. Weitkamp (Eds) Handbook of heterogeneous catalysis Weinheim: Wiley-VCH 3045-3080.
65. M. O’Connell, G. Kolb, K.P. Schelhaas, J. Schuerer, D. Tiemann, A. Ziogas, et al. (2009) Development and evaluation of a microreactor for the reforming of diesel fuel in the kW range. Int J Hydrogen Energy 34 6290-6303.
66. A. Cutillo, S. Specchia, M. Antonini, G. Saracco and V. Specchia (2006) Diesel fuel processor for PEM fuel cells: two possible alternatives (ATR versus SR). J Power Sources 154 379-385.
67. J. Thormann, P. Pfeifer, K. Schubert and U. Kunz (2008) Reforming of diesel fuel in a micro reactor for APU systems. Chem Eng J 135S S74-S81.
68. Q. Ming, T. Healey, L. Allen and P. Irving (2002) Steam reforming of hydrocarbon fuels. Catal Today 77 51-64.
69. D.J. Haynes, D.A. Berry, D. Shekhawat and J.J. Spivey (2008) Catalytic partial oxidation of n-tetradecane using pyrochlores: effect of Rh and Sr substitution. Catal Today 136 206-213.
70. D. Shekhawat, D.A. Berry, D.J. Haynes and J.J. Spivey (2009) Fuel constituent effects on fuel reforming properties for fuel cell applications. Fuel 88 817-825.
71. R.P. O’Connor, E.J. Klein and L.D. Schmidt (2000) High yields of synthesis gas by millisecond partial oxidation of higher hydrocarbons. Catal Lett 70 99-107.
72. A. Shamsi, J.P. Baltrus and J.J. Spivey (2005) Characterization of coke deposited on Pt/alumina catalyst during reforming of liquid hydrocarbons. Appl Catal A: Gen 293 145-152.
73. P.K. Cheekatamarla and A.M. Lane (2005) Efficient bimetallic catalysts for hydrogen generation from diesel fuel. Int J Hydrogen Energy 30 1277-1285.
74. X. Chen, B.D. Gould and J.W. Schwank (2009) n-Dodecane reforming over monolith-based Ni catalysts: SEM study of axial carbon distribution profile. Appl Catal A: Gen 356 137-147.
75. C. Palm, P. Cremer, R. Peters and D. Stolten (2002) Small-scale testing of a precious metal catalyst in the autothermal reforming of various hydrocarbon feeds. J Power Sources 106 231-237.
76. X. Chen, A.R. Tadd and J.W. Schwank (2007) Carbon deposited on Ni/Ce-Zr-O isooctane autothermal reforming catalysts. J Catal 251 374-387.
77. A. Qi, S. Wang, G. Fu and D. Wu (2005) Autothermal reforming of n-octane on Ru-based catalysts. Appl Catal A: Gen 293 71-82.
78. D.J. Moon, K. Sreekumar, S.D. Lee, B.G. Lee and H.S. Kim (2001) Studies on gasoline fuel processor system for fuel-cell powered vehicles application. Appl Catal A: Gen 215 1-9.
79. M. Krumpelt, T.R. Krause, J.D. Carter, J.P. Kopasz and S. Ahmed (2002) Fuel processing for fuel cell systems in transportation and portable power applications. Catal Today 77 3-16.
80. G. Kolb, T. Baier, J. Schürer, D. Tiemann, A. Ziogas, H. Ehwald, et al. (2008) A micro-structured 5 kW complete fuel processor for iso-octane as hydrogen supply system for mobile auxiliary power units: Part I. Development of autothermal reforming catalyst and reactor. Chem Eng J 137 653-663.
81. A.R. Tadd, B.D. Gould and J.W. Schwank (2005) Packed bed versus microreactor performance in autothermal reforming of isooctane. Catal Today 110 68-75.
82. L.F. Brown (2001) A comparative study of fuels for on-board hydrogen production for fuel-cell-powered automobiles. Int J Hydrogen Energy 26 381-397.
83. T.A. Semelsberger, L.F. Brown, R.L. Borup and M.A. Inbody (2004) Equilibrium products from autothermal processing for generating hydrogen-rich fuel-cell feeds. Int J Hydrogen Energy 29 1047-1064.
84. E.S. Ranganathan, S.K. Bej and L.T. Thompson (2005) Methanol steam reforming over Pd/ZnO and Pd/CeO2 catalysts. Appl Catal A: Gen 289 153-162.
85. M.L. Cubeiro and J.L. Fierro (1998) Selective production of hydrogen by partial oxidation of methanol over Zn-supported palladium catalysts. J Catal 179 150-162.
86. A.F. Ghenciu (2002) Review of fuel processing catalysts for hydrogen production in PEM fuel cell systems. Curr Opin Solid St M 6 389-399.
87. J. Agrell, H. Birgersson and M. Boutonnet (2002) Steam reforming of methanol over a Cu/ZnO/Al2O3 catalyst: a kinetic analysis and strategies for suppression of CO formation. J Power Sources 106 249-257.
88. W. Wiese, B. Emonts and R. Peters (1999) Methanol steam reforming in a fuel cell drive system. J Power Sources 84 187-193.
89. C.J. Jiang, D.L. Trimm, M.S. Wainwright and N.W. Cant (1993) Kinetic study of steam reforming of methanol over copper-based catalysts. Appl Catal A: Gen 93 245-255.
90. B. Lindström and L.J. Petterson (2001) Deactivation of copper-based catalysts for fuel cell applications. Catal Lett 74 27-30.
91. J.C. Amphlett, R.F. Mann, B.A. Peppley and C.P. Thurgood (2001) A deactivation model for methanol-steam reformation on Cu/ZnO/Al2O3 catalyst for optimizing the production of fuel-cell hydrogen. Stud Surf Sci Catal 139 205-212.
92. H. Purnama, T. Ressler, R.E. Jentoft, H. Soerijanto, R. Schlögl and R. Schomaecker (2004) CO formation-selectivity for steam reforming of methanol with a commercial CuO/ZnO/Al2O3 catalyst. Appl Catal A: Gen 259 83-94.
93. Y. Men, G. Kolb, R. Zapf, D. Tiemann, M. Wichert, V. Hessel, et al. (2008) A complete miniaturized microstructured methanol fuel processor/fuel cell system for low power applications. Int J Hydrogen Energy 33 1374-1382.
94. Y. Men, H. Gnaser, R. Zapf, G. Kolb and C. Ziegler (2004) Steam reforming of methanol over a Cu/CeO2/Al2O3 catalysts in a microchannel reactor. Appl Catal A: Gen 277 83-90.
95. Y. Men, H. Gnaser, R. Zapf, G. Kolb, V. Hessel and C. Ziegler (2004) Parallel screening of Cu/CeO2/Al2O3 thin film catalysts for steam reforming of methanol in a 10-channel micro-structured reactor. Catal Commun 5 671-675.
96. R. Farrauto, S. Hwang, L. Shore, W. Ruettinger, J. Lampert, T. Giroux, et al. (2003) New material needs for hydrocarbon fuel processing: Generating hydrogen for the PEM fuel cell. Annu Rev Mater Res 33 1-27.
97. J.R. Lattner and M.P. Harold (2007) Autothermal reforming of methanol: Experiments and modeling. Catal Today 120 78-89.
98. B. Lindström, J. Agrell and L.J. Petterson (2003) Combined methanol reforming for hydrogen production over monolithic catalysts. Chem Eng J 93 91-101.
99. S. Liu, K. Takahashi and M. Ayabe (2003) Hydrogen production by oxidative methanol reforming on Pd/ZnO catalyst: effects of Pd loading. Catal Today 87 247-253.
100. S. Liu, K. Takahashi, K. Uematsu and M. Ayabe (2004) Hydrogen production by methanol reforming on Pd/ZnO catalyst: effect of the addition of a third metal component. Appl Catal A: Gen 277 265-270.
101. B.F. Hagh (2004) Stoichiometric analysis of autothermal fuel processing. J Power Sources 130 85-94.
102. E.D. Doss, R. Kumar, R.K. Ahluwalia and M. Krumpelt (2001) Fuel processors for automotive fuel cell systems: a parametric analysis. J Power Sources 102 1-15.
103. T.L. Reitz, S. Ahmed, M. Krumpelt, R. Kumar and H.H. Kung (2000) Characterization of CuO/ZnO under oxidizing conditions for the oxidative methanol reforming reaction. J Mol Catal A: Chem 162 275-285.
104. M. Ni, D.Y.C. Leung and M.K.H. Leung (2007) A review on bio-ethanol reforming for hydrogen production. Int J Hydrogen Energy 32 3238-3247.
105. A. Haryanto, S. Fernando, N. Murali and S. Adhikari (2005) Current status of hydrogen production techniques by steam reforming of ethanol: a review. Energy Fuel 19 2098-2106.
106. P.D. Vaidya and A.E. Rodrigues (2006) Insight into steam reforming of ethanol to produce hydrogen for fuel cells. Chem Eng J 117 39-49.
107. J. Comas, F. Marino, M. Laborde and N. Amadeo (2004) Bio-ethanol steam reforming on Ni/Al2O3 catalyst. Chem Eng J 98 61-68.
108. A. Erdohelyi, J. Rasko, T. Kecskes, M. Toth, M. Domok and K. Baan (2006) Hydrogen formation in ethanol reforming on supported noble metal catalysts. Catal Today 116 367-376.
109. J. Llorca, P.R. de la Piscina, J.A. Dalmon, J. Sales and N. Homs (2003) CO-free hydrogen from steam-reforming of bioethanol over ZnO-supported cobalt catalysts: effect of the metallic precursor. Appl Catal B: Env 43 355-369.
110. D.R. Sahoo, S. Vajpai, S. Patel and K.K. Pant (2007) Kinetic modeling of steam reforming of ethanol for the production of hydrogen over Co/Al2O3 catalyst. Chem Eng J 125 139-147.
111. M.S. Batista, R.K.S. Santos, E.M. Assaf, J.M. Assaf and E.A. Ticianelli (2003) Characterization of the activity and stability of supported cobalt catalysts for the steam reforming of ethanol. J Power Sources 124 99-103.
112. M.S. Batista, R.K.S. Santos, E.M. Assaf, J.M. Assaf and E.A. Ticianelli (2004) High efficiency steam reforming of ethanol by cobalt-based catalysts. J Power Sources 134 27-32.
113. Y. Men, G. Kolb, R. Zapf, V. Hessel and H. Löwe (2007) Ethanol steam reforming in a microchannel reactor. Process Saf Environ 85 413-418.
114. D.K. Liguras, D.I. Kondarides and X.E. Verykios (2003) Production of hydrogen for fuel cells by steam reforming of ethanol over supported noble metal catalysts. Appl Catal B: Env 43 345-354.
115. E.C. Wanat, K. Venkataraman and L.D. Schmidt (2004) Steam reforming and water-gas shift of ethanol on Rh and Rh-ce catalysts in a catalytic wall reactor. Appl Catal A: Gen 276 155-162.
116. H.S. Roh, A. Platon, Y. Wang and D.L. King (2006) Catalyst deactivation and regeneration in low temperature ethanol steam reforming with Rh/CeO2-ZrO2 catalysts. Catal Lett 110(1–2), 1-6.
117. P.D. Vaidya and A.E. Rodrigues (2006) Kinetics of steam reforming of ethanol over a Ru/Al2O3 catalyst. Ind Eng Chem Res 45 6614-6618.
118. F. Soyal-Baltacioglu, A.E. Aksoylu and Z.I. Onsan (2008) Steam reforming of ethanol over Pt-Ni catalysts. Catal Today 138 183-186.
119. E. Orücü, F. Gökaliler, A.E. Aksoylu and Z.I. Onsan (2008) Ethanol steam reforming for hydrogen production over bimetallic Pt-Ni/δ-Al2O3. Catal Lett 120 198-203.
120. J. Sun, X.P. Qiu, F. Wu and W.T. Zhu (2005) Hydrogen from steam reforming of ethanol at low temperature over Ni/Y2O3, Ni/La2O3 and Ni/Al2O3 catalysts for fuel cell application. Int J Hydrogen Energy 30 437-445.
121. E.C. Wanat, B. Suman and L.D. Schmidt (2005) Partial oxidation of alcohols to produce hydrogen and chemicals in millisecond-contact time reactors. J Catal 235 18-27.
122. F. Frusteri, S. Freni, V. Chiodo, S. Donato, G. Bonura and S. Cavallaro (2006) Steam and autoreforming of bio-ethanol over MgO and CeO2 supported Ni catalysts. Int J Hydrogen Energy 31 2193-2199.
123. V. Klouz, V. Fierro, P. Denton, H. Katz, J.P. Lisse, J.P. Bouvot-Maudit, et al. (2002) Ethanol reforming for hydrogen production in a hybrid electric vehicle: Process optimization. J Power Sources 105 26-34.
124. J. Sun, X.P. Qiu, F. Wu, W.T. Zhu, W.D. Wang and S.J. Hao (2004) Hydrogen from steam reforming of ethanol in low and middle temperature range for fuel cell application. Int J Hydrogen Energy 29 1075-1081.
125. A.N. Fatsikostas, D.I. Kondarides and X.E. Verykios (2002) Production of hydrogen for fuel cells by reformation of biomass-derived ethanol. Catal Today 75 145-155.
126. M.A. Goula, S.K. Kontou and P.E. Tsiakaras (2004) Hydrogen production by ethanol steam reforming over a commercial Pd/γ–Al2O3 catalyst. Appl Catal B: Env 49 135-144.
127. P.K. Cheekatamarla and J.M. Finnerty (2006) Reforming catalysts for hydrogen generation in fuel cell applications. J Power Sources 160 490-499.
128. D.L. Trimm (2005) Minimisation of carbon monoxide in a hydrogen stream for fuel cell application. Appl Catal A: Gen 296 1-11.
129. Y. Lei, N.W. Cant and D.L. Trimm (2005) Activity patterns for the water gas shift reaction over supported precious metal catalysts. Catal Lett 103 133-136.
130. S. Natesakhawat, X.Q. Wang, L.Z. Zhang and U.S. Ozkan (2006) Development of chromium-free iron-based catalysts for high-temperature water-gas shift reaction. J Mol Catal A: Chem 260 82-94.
131. C. Martos, J. Dufour and A. Ruiz (2009) Synthesis of Fe3O4-based catalysts for the high-temperature water gas shift reaction. Int J Hydrogen Energy 34 4475-4481.
132. W. Ruettinger, O. Ilinich and R.J. Farrauto (2003) A new generation of water gas shift catalysts for fuel cell applications. J Power Sources 118 61-65.
133. O. Ilinich, W. Ruettinger, X.S. Liu and R. Farrauto (2007) Cu-Al2O3-CuAl2O4 water-gas shift catalyst for hydrogen production in fuel cell applications: mechanism of deactivation under start-stop operating conditions. J Catal 247 112-118.
134. T. Tabakova, V. Idakiev, J. Papavasiliou, G. Avgouropoulos and T. Ioannides (2007) Effect of additives on the WGS activity of combustion synthesized CuO/CeO2 catalysts. Catal Commun 8 101-106.
135. R.J. Farrauto, Y. Liu, W. Ruettinger, O. Ilinich, L. Shore and T. Giroux (2007) Precious metal catalysts supported on ceramic and metal monolithic structures for the hydrogen economy. Cat Rev Sci Eng 49 141-196.
136. R.J. Gorte and S. Zhao (2005) Studies of the water-gas-shift reaction with ceria-supported precious metals. Catal Today 104 18-24.
137. T. Giroux, S. Hwang, Y. Liu, W. Ruettinger and L. Shore (2005) Monolithic structures as alternatives to particulate catalysts for the reforming of hydrocarbons for hydrogen generation. Appl Catal B: Env 56 95-110.
138. S. Uemiya (1999) State-of-the-art of supported metal membranes for gas separation. Sep Purif Methods 28 51-85.
139. F. Marino, C. Descorme and D. Duprez (2004) Noble metal catalysts for the preferential oxidation of carbon monoxide in the presence of hydrogen. Appl Catal B: Env 54 59-66.
140. O. Pozdnyakova, D. Teschner, A. Wootsch, J. Krohnert, B. Steinhauer, H. Sauer, et al. (2006) Preferential CO oxidation in hydrogen (PrOX) on ceria-supported catalysts, part II: Oxidation states and surface species on Pd/CeO2 under reaction conditions, suggested reaction mechanism. J Catal 237 17-28.
141. E.Y. Ko, E.D. Park, K.W. Seo, H.C. Lee, D. Lee and S. Kim (2006) A comparative study of catalysts for the preferential CO oxidation in excess hydrogen. Catal Today 116 377-383.
142. T. Ince, G. Uysal, A.N. Akin and R. Yildirim (2005) Selective low-temperature CO oxidation over Pt-Co-Ce/Al2O3 in hydrogen-rich streams. Appl Catal A: Gen 292 171-176.
143. G. Uysal, A.N. Akin, Z.I. Onsan and R. Yildirim (2006) Design of a Pt-Co-Ce/MgO catalyst for preferential CO oxidation. Catal Lett 108 193-196.
144. S.H. Cho, J.S. Park, S.H. Choi and S.H. Kim (2006) Effect of magnesium on preferential oxidation of carbon monoxide on platinum catalyst in hydrogen-rich stream. J Power Sources 156 914-920.
145. J.L. Ayastuy, M.P. Gonzales-Marcos, J.R. Gonzales-Velasco and M.A. Gutierrez-Ortiz (2007) MnOx/Pt/Al2O3 catalysts for CO oxidation in H2-rich streams. Appl Catal B: Env 70 532-541.
146. G. Uysal, A.N. Akin, Z.I. Onsan and R. Yildirim (2006) Preferential CO oxidation over Pt-SnO2/Al2O3 in hydrogen-rich streams containing CO2 and H2O (CO removal from H2 with PROX). Catal Lett 111 173-176.
147. X. Liu, O. Korotkikh and R.J. Farrauto (2002) Selective catalytic oxidation of CO in H2: structural study of Fe oxide-promoted Pt/alumina catalyst. Appl Catal A: Gen 226 293-303.
148. S.H. Ren and X.L. Hong (2007) CO selective oxidation in hydrogen-rich gas over platinum catalysts. Fuel Process Technol 88 383-386.
149. E. Simsek, S. Ozkara, A.E. Aksoylu and Z.I. Onsan (2007) Preferential CO oxidation over activated carbon supported catalysts in H2-rich streams containing CO2 and H2O. Appl Catal A: Gen 316 169-174.
150. S. Ozkara and A.E. Aksoylu (2003) Selective low temperature carbon monoxide oxidation in H2-rich gas streams over activated carbon supported catalysts. Appl Catal A: Gen 251 75-83.
151. G. Avgouropoulos, T. Ioannides, H.K. Matralis, J. Batista and S. Hocevar (2001) CuO-CeO2 mixed oxide catalysts for selective oxidation of carbon monoxide in excess hydrogen. Catal Lett 73 33-40.
152. Y. Zhang, C.Y. Zhao, H. Liang and Y. Liu (2009) Macroporous monolithic Pt/γ-Al2O3 and K-Pt/γ-Al2O3 catalysts used for preferential oxidation of CO. Catal Lett 127 339-347.
153. A. Sirijaruphan, J.G. Goodwin, R.W. Rice, D.G. Wei, K.R. Butcher, G.W. Roberts, et al. (2005) Effect of metal foam supports on the selective oxidation of CO on Fe-promoted Pt/γ-Al2O3. Appl Catal A: Gen 281 11-18.
154. A. Sirijaruphan, J.G. Goodwin, R.W. Rice, D.G. Wei, K.R. Butcher, G.W. Roberts, et al. (2005) Metal foam supported Pt catalysts for the selective oxidation of CO in hydrogen. Appl Catal A: Gen 281 1-9.
155. S. Srinivas, A. Dhingra, H. Im and E. Gulari (2004) A scalable silicon microreactor for preferential CO oxidation: performance comparison with a tubular packed-bed microreactor. Appl Catal A: Gen 274 285-293.
156. G. Kolb, V. Hessel, V. Cominos, C. Hofmann, H. Löwe, G. Nikolaidis, et al. (2007) Selective oxidations in micro-structured catalytic reactors – for gas-phase reactions and specifically for fuel processing for fuel cells. Catal Today 120 2-20.
157. M.J. Kahlich, H.A. Gasteiger and R.J. Behm (1997) Kinetics of the selective CO oxidation in H2-rich gas on Pt/Al2O3. J Catal 171 93-105.
158. P. Gray and M. Petch (2000) Advances with hotspot fuel processing. Platinum Metals Rev 44 108-111.
159. S. Takenaka, T. Shimizu and K. Otsuka (2004) Complete removal of carbon monoxide in hydrogen-rich gas stream through methanation over supported metal catalysts. Int J Hydrogen Energy 29 1065-1073.
160. R.A. Dagle, Y. Wang, G.G. Xia, J.J. Strohm, J. Holladay and D.R. Palo (2007) Selective CO methanation catalysts for fuel processing applications. Appl Catal A: Gen 326 213-218.
161. P. Panagiotopoulou, D.I. Kondarides and X.E. Verykios (2008) Selective methanation of CO over supported noble metal catalysts: effects of the nature of the metallic phase on catalytic performance. Appl Catal A: Gen 344 45-54.
162. P. Panagiotopoulou, D.I. Kondarides and X.E. Verykios (2008) Selective methanation of CO over supported Ru catalysts. Appl Catal B: Env 88 470-478.
163. R.J. Farrauto (2005) Introduction to solid polymer membrane fuel cells and reforming natural gas for production of hydrogen. Appl Catal B: Env 56 3-7.
164. D.G. Löffler, K. Taylor and D. Mason (2003) A light hydrocarbon fuel processor producing high-purity hydrogen. J Power Sources 117 84-91.
165. C.S. Song (2003) An overview of new approaches to deep desulfurization for ultra-clean gasoline, diesel fuel and jet fuel. Catal Today 86 211-263.
166. C. Song (2002) Fuel processing for low-temperature and high-temperature fuel cells: Challenges, and opportunities for sustainable development in the 21st century. Catal Today 77 17-49.
167. S. Satokawa, Y. Kobayashi and H. Fujiki (2005) Adsorptive removal of dimethylsulfide and t-butyl mercaptan from pipeline natural gas on Ag zeolites under ambient conditions. Appl Catal B: Env 56 51-56.
168. K. Takatsu, G. Takegoshi, H. Katsuno, Y. Kawashima and H. Matsumoto (2007) Room temperature sulfur removal from LPG with adsorbent for fuel cell application: adsorption behavior of sulfur compounds. J Jap Pet Inst 50 200-207.
169. X.L. Ma, L. Sun and C.S. Song (2002) A new approach to deep desulfurization of gasoline, diesel fuel and jet fuel by selective adsorption for ultra-clean fuels and fuel cell applications. Catal Today 77 107-116.
170. T. Fukunaga, H. Katsuno, H. Matsumoto, O. Takahashi and Y. Akai (2003) Development of kerosene fuel processing system for PEFC. Catal Today 84 197-200.
171. A. Zhou, X.L. Ma and C.S. Song (2006) Liquid phase adsorption of multi-ring thiophenic sulfur compounds on carbon materials with different surface properties. J Phys Chem B 110 4699-4707.
172. D. Jayne, Y. Zhang, S. Haji and C. Erkey (2005) Dynamics of removal of organosulfur compounds from diesel by adsorption on carbon aerogels for fuel cell applications. Int J Hydrogen Energy 30 1287-1293.
173. H.F. Rase (1990) Fixed-bed reactor design and diagnostics. London: Butterworths
174. H.S. Fogler (1999) Elements of chemical reaction engineering. 4th ed. New Jersey: Pearson Education Inc.
175. A.K. Avci, D.L. Trimm and Z.I. Onsan (2001) Heterogeneous reactor modeling for simulation of catalytic oxidation and steam reforming of methane. Chem Eng Sci 56 641-649.
176. G. Eigenberger (2004) Ullmann’s processes and process engineering. Weinheim: Wiley-VCH p. 1983–2023
177. R.B. Bird, W.E. Stewart and E.N. Lightfoot (2002) Transport Phenomena. 2nd ed. New York: Wiley
178. T. Boger, A.K. Heibel and C.M. Sorensen (2004) Monolithic catalysts for the chemical industry. Ind Eng Chem Res 43 4602-4611.
179. L. Kiwi-Minsker and A. Renken (2008) Microstructured reactors. G. Ertl, H. Knözinger, F. Schüth, J. Weitkamp (Eds) Handbook of heterogeneous catalysis Weinheim: Wiley-VCH 2248-2264.
180. R.K. Shah and A.L. London (1978) Laminar flow forced convection in ducts. Advances in heat transfer, Supplement 1. New York: Academic Press
181. A. Cybulski and J.A. Moulijn (2006) The present and the future of structured catalysts: an overview. A. Cybulski, J.A. Moulijn (Eds) Structured catalysts and reactors Boca Raton, FL: CRC Press 1-17.
182. V. Hessel, H. Löwe, A. Müller and G. Kolb (2005) Chemical micro process engineering: processing and plants. Weinheim: Wiley-VCH
183. R. Zapf, C. Becker-Willinger, K. Berresheim, H. Bolz, H. Gnaser, V. Hessel, et al. (2003) Detailed characterization of various porous-alumina based catalyst coatings within microchannels and their testing for methanol steam reforming. Trans IChemE 81A 721-729.
184. A. Stefanescu, A.C. van Veen, C. Mirodatos, J.C. Beziat and E. Duval-Brunel (2007) Wall coating optimization for microchannel reactors. Catal Today 125 16-23.
185. T. Conant, A. Karim and A. Datye (2007) Coating of steam reforming catalysts in non-porous multi-channeled microreactors. Catal Today 125 11-15.
186. C. Horny, L. Kiwi-Minsker and A. Renken (2004) Micro-structured string reactor for autothermal production of hydrogen. Chem Eng J 101 3-9.
187. C. Horny, A. Renken and L. Kiwi-Minsker (2007) Compact string reactor for autothermal hydrogen production. Catal Today 120 45-53.
188. J.H.B.J. Hoebink, J.M.A. Harmsen, C.M.L. Scholz, G.B. Marin and J.C. Schouten (2006) Modeling of automotive exhaust gas converters. A. Cybulski, J.A. Moulijn (Eds) Structured catalysts and reactors Boca Raton, FL: CRC Press 311-354.
189. S. Hardt, W. Ehrfeld, V. Hessel and K.M. Vanden Bussche (2003) Strategies for size reduction of microreactors by heat transfer enhancement effects. Chem Eng Commun 190 540-559.
190. M. Karakaya and A.K. Avci (2009) Simulation of on-board fuel conversion in catalytic microchannel reactor-heat exchanger systems. Top Catal 52 2112-2116.
191. J.M. Commenge, L. Falk, J.P. Corriou and M. Matlosz (2002) Optimal design for flow uniformity in microchannel reactors. AIChE J 48 345-358.
192. E.R. Delsman, M.H.J.M. De Croon, G.D. Elzinga, P.D. Cobden, G.J. Kramer and J.C. Schouten (2005) The influence of differences between microchannels on micro reactor performance. Chem Eng Technol 28 367-375.
193. O. Goerke, P. Pfeifer and K. Schubert (2004) Water-gas shift reaction and selective oxidation of CO in microreactors. Appl Catal A: Gen 263 11-18.
194. K. Pangarkar, T.J. Schildhauer, J.R.V. Ommen, J. Nijenhuis, F. Kapteijn and J.A. Moulijn (2008) Structured packings for multiphase catalytic reactors. Ind Eng Chem Res 47 3720-3751.
195. J. Banhart (2001) Manufacture, characterization and application of cellular metals and metal foams. Prog Mater Sci 30 341-392.
196. J.G. Fourie and J.P.D. Plessis (2002) Pressure drop modeling in cellular metallic foams. Chem Eng Sci 57 2781-2789.
197. L. Giani, G. Groppi and E. Tronconi (2005) Mass transfer characterization of metallic foams as supports for structured catalysts. Ind Eng Chem Res 44 4993-5002.
198. L. Giani, G. Groppi and E. Tronconi (2005) Heat transfer characterization of metallic foams. Ind Eng Chem Res 44 9078-9085.
199. V. Meille (2006) Review on methods to deposit catalysts on structured surfaces. Appl Catal A: Gen 315 1-17.
200. A. Shamsi and J.J. Spivey (2005) Partial oxidation of methane on Ni-MgO catalysts supported on metal foams. Ind Eng Chem Res 44 7298-7305.
201. H. Yu, H. Chen, M. Pan, Y. Tang, K. Zeng, F. Peng, et al. (2007) Effect of foam materials on the performance of methanol steam micro-reformer for fuel cells. Appl Catal A: Gen 327 106-113.
202. H. Chen, H. Yu, Y. Tang, M. Pan, F. Peng, H. Wang, et al. (2008) Assessment and optimization of the mass transfer limitation in a metal foam methanol microreformer. Appl Catal A: Gen 337 155-162.
203. J.T. Richardson, Y. Peng and D. Remue (2000) Properties of ceramic foam catalyst supports: pressure drop. Appl Catal A: Gen 204 19-32.
204. M.V. Twigg and J.T. Richardson (2007) Fundamentals and applications of structured ceramic foam catalysts. Ind Eng Chem Res 46 4166-4177.
205. J.T. Richardson, D. Remue and J.-K. Hung (2003) Properties of ceramic foam catalyst supports: mass and heat transfer. Appl Catal A: Gen 250 319-329.
206. J.T. Richardson, M. Garrait and K. Hung J- (2003) Carbon dioxide reforming with Rh and Pt-Re catalysts dispersed on ceramic foam supports. Appl Catal A: Gen 255 69-82.
207. F.C. Patcas, G.I. Garrido and B. Kraushaar-Czarnetzki (2007) CO oxidation over structured carriers: a comparison of ceramic foams, and beads. Chem Eng Sci 62 3984-3990.
208. A. Kolodziej, M. Jaroszynski, B. Janus, T. Kleszcz, J. Lojewska and T. Lojewski (2009) An experimental study of the pressure drop in fluid flows through wire gauzes. Chem Eng Commun 196 932-949.
209. A. Kolodziej and J. Lojewska (2009) Flow resistance of wire gauzes. AIChE J 55 264-267.
210. A. Kolodziej and J. Lojewska (2009) Experimental and modeling study on flow resistance of wire gauzes. Chem Eng Process 48 816-822.
211. Z. Jiang, K.-S. Chung, G.-R. Kim and J.-S. Chung (2003) Mass transfer characteristics of wire-mesh honeycomb reactors. Chem Eng Sci 58 1103-1111.
212. A. Qi, B. Peppley and K. Karan (2007) Integrated fuel processors for fuel cell applications: a review. Fuel Process Technol 88 3-22.
213. L. Ma, C. Jiang, A.A. Adesina, D.L. Trimm and M.S. Wainwright (1996) Simulation studies of autothermal reactor system for H2 production from methanol steam reforming. Chem Eng J 62 103-111.
214. A. Piga and X.E. Verykios (2000) An advanced reactor configuration for the partial oxidation of methane to synthesis gas. Catal Today 60 63-71.
215. A.K. Avci, D.L. Trimm, A.E. Aksoylu and Z.I. Onsan (2003) Ignition characteristics of Pt, Ni and Pt–Ni catalysts used for autothermal fuel processing. Catal Lett 88 17-22.
216. Y.S. Matros and G.A. Bunimovich (1996) Reverse-flow operation in fixed bed catalytic reactors. Cat Rev Sci Eng 38 1-68.
217. R.F. Blanks, T.S. Wittrig and D.A. Peterson (1990) Bidirectional adiabatic synthesis gas generator. Chem Eng Sci 45 2407-2413.
218. A.M. De Groote, G.F. Froment and T. Kobylinski (1996) Synthesis gas production from natural gas in a fixed bed reactor with reversed flow. Canad J Chem Eng 74 735-742.
219. M.S. Kulkarni and M.P. Dudukovic (1998) Periodic operation of asymmetric bidirectional fixed-bed reactors with temperature limitations. Ind Eng Chem Res 37 770-781.
220. T. Kikas, I. Bardenshteyn, C. Williamson, C. Ejimofor, P. Puri and A.G. Fedorov (2003) Hydrogen production in the reverse-flow autothermal catalytic microreactor. Ind Eng Chem Res 42 6273-6279.
221. G. Kolios, J. Frauhammer and G. Eigenberger (2001) A simplified procedure for the optimal design of autothermal reactors for endothermic high-temperature reactions. Chem Eng Sci 56 351-357.
222. G. Kolios, J. Frauhammer and G. Eigenberger (2002) Efficient reactor concepts for coupling of endothermic and exothermic reactions. Chem Eng Sci 57 1505-1510.
223. D.A. Reay (1993) Catalytic combustion: current status and implications for energy efficiency in the process industries. Heat Recov Syst CHP 13 383-390.
224. E.A. Polman, J.M. Der Kinderen and F.M.A. Thuis (1999) Novel compact steam reformer for fuel cells with heat generation by catalytic combustion augmented by induction heating. Catal Today 47 347-351.
225. M. Zanfir and A. Gavriilidis (2001) Modeling of a catalytic plate reactor for dehydrogenation-combustion coupling. Chem Eng Sci 56 2671-2683.
226. M. Zanfir and A. Gavriilidis (2003) Catalytic combustion assisted methane steam reforming in a catalytic plate reactor. Chem Eng Sci 58 3947-3960.
227. A.L.Y. Tonkovich, B. Yang, S.T. Perry, S.P. Fitzgerald and Y. Wang (2007) From seconds to milliseconds to microseconds through tailored microchannel reactor design of a steam methane reformer. Catal Today 120 21-29.
228. E.L.C. Seris, G. Abramowitz, A.M. Johnston and B.S. Haynes (2008) Scaleable, microstructured plant for steam reforming of methane. Chem Eng J 135S S9-S16.
229. E.L.C. Seris, G. Abramowitz, A.M. Johnston and B.S. Haynes (2005) Demonstration plant for distributed production of hydrogen from steam reforming of methane. Trans IChemE 83(A6), 619-625.
230. A.K. Avci, D.L. Trimm and M. Karakaya (2010) Microreactor catalytic combustion for chemicals processing. Catal Today 155 66-74.
231. M. Karakaya and A.K. Avci (2010) Comparison of compact reformer configurations for on-board fuel processing. Int J Hydrogen Energy 35 2305-2316.
232. G.Q. Lu, J.C.D. Costa, M. Duke, S. Giessler, R. Socolow, R.H. Williams, et al. (2007) Inorganic memebranes for hydrogen production and purification: a critical review and perspective. J Colloid Interface Sci 314 589-603.
233. A.K. Prabhu, A. Liu, L.G. Lovell and S.T. Oyama (2000) Modeling of methane reforming reaction in hydrogen selective membrane reactors. J Membr Sci 177 83-95.
234. J.S. Oklany, K. Hou and R. Hughes (1998) A comparison of dense and microporous membrane reactors for the steam reforming of methane. Appl Catal A: Gen 170 13-22.
235. M.E. Androver, E. Lopez, D.O. Borio and M.N. Pedernera (2009) Simulation of a membrane reactor for the water-gas shift reaction: pressure and thermal effects. Chem Eng J 154 196-202.
236. N. Wakao and S. Kaguei (1982) Heat and mass transfer in packed beds. New York: Gordon and Breach Science Publishers
237. A.M. De Groote and G.F. Froment (1996) Simulation of the catalytic partial oxidation of methane to synthesis gas. Appl Catal A: Gen 138 245-264.
238. J. Xu and G.F. Froment (1989) Methane steam reforming, methanation and water-gas shift: I. Intrinsic kinetics. AIChE J 35 88-96.
239. A. Varesano, I. Guaglio, G. Saracco and P.L. Maffettone (2005) Dynamics of a methanol reformer for automotive applications. Ind Eng Chem Res 44 759-768.
240. P.B. Tøttrup (1982) Evaluation of intrinsic steam reforming kinetic parameters from rate measurements on full particle size. Appl Catal 4 377-389.
241. Praharso, A.A. Adesina, D.L. Trimm and N.W. Cant (2004) Kinetic study of iso-octane steam reforming over a nickel-based catalyst. Chem Eng J 99 131-136.
242. J.K. Lee, J.B. Ko and D.H. Kim (2004) Methanol steam reforming over Cu/ZnO/Al2O3 catalyst: kinetics and effectiveness factor. Appl Catal A: Gen 278 25-35.
243. S.S. Hla, D. Park, G.J. Duffy, J.H. Edwards, D.G. Roberts, A. Ilyushechkin, et al. (2009) Kinetics of high-temperature water-gas shift reaction over two iron-based commercial catalysts using simulated coal-derived syngases. Chem Eng J 146 148-154.
244. Y. Choi and H.G. Stenger (2003) Water gas shift reaction kinetics and reactor modeling for fuel cell grade hydrogen. J Power Sources 124 432-439.
245. M. Karakaya, A.K. Avci, A.E. Aksoylu and Z.I. Onsan (2009) Steady-state and dynamic modeling of indirect partial oxidation of methane in a wall-coated microchannel. Catal Today 139 312-321.
246. B.A. Finlayson (1980) Nonlinear analysis in chemical engineering. New York: Mc-Graw Hill
247. R.G. Rice and D.D. Do (1995) Applied mathematics and modeling for chemical engineers. New York: Wiley
248. S. Schaaf and P. Chambre (1961) Flow of rarified gases. Princeton, NJ: Princeton University Press
249. V.V. Rande (2002) Computational flow modeling for chemical reactor engineering. San Diego, CA: Academic
250. H.K. Versteeg and M. Malalasekra (1995) An introduction to computational fluid dynamics. Harlow: Longman Scientific & Technical
251. D. Majumder and L.J. Broadbelt (2006) A multi-scale scheme for modeling catalytic flow reactors. AIChE J 52 4214-4228.