Direct Reforming Fuel Cells

Fuel Cells: Technologies for Fuel Processing

Volumn , Issue , 2011, Pages 409-450

  Hansen, John Bøgild ^a  

^a HALDOR TOPSØE A S   (Denmark)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 84884427574     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1016/B978-0-444-53563-4.10013-6     Document Type: Chapter

References (179)

1. M. Krumpelt, J.P. Ackerman, D.C. Fee, J.E. Herceg, C. Slack and Y. Lwin (1983) Advanced fuel cell concepts for the 0.1 to 100 MW range. Proc Am Power Conf 45 470-473.
2. Patel PS. Assessment of a 6500-btu/kwh heat rate dispersed generator final report, EPRI-EM-3307, project 1041–12, final report; 1983.
3. N. Christiansen, J.B. Hansen, H. Holm-Larsen, M.J. Jørgensen, M. Wandel, P.V. Hendriksen, et al. (2009) Status of development and manufacture of solid oxide fuel cells at topsoe fuel cell A/S and Risø DTU. ECS trans 25 133-142.
4. M.C. Tucker (2010) Progress in metal-supported solid oxide fuel cells: a review. J Power Sources 195 4570-4582.
5. S.H. Clarke, A.L. Dicks, K. Pointon, T.A. Smith and A. Swann (1997) Catalytic aspects of the steam reforming of hydrocarbons in internal reforming fuel cells. Catal Today 38 411-423.
6. A.L. Dicks (1998) Advances in catalysts for internal reforming in high temperature fuel cells. J Power Sources 71 111-122.
7. R.J. Gorte (2005) Recent developments towards commercialization of solid oxide fuel cells. AIChE J 51 2377-2381.
8. M.D. Gross, J.M. Vohs and R.J. Gorte (2007) Recent progress in SOFC anodes for direct utilization of hydrocarbons. J Mater Chem 17 3071-3077.
9. E. Ivers-Tiffée, H. Timmermann, A. Leonide, N.H. Menzler and J. Malzbender (2009) W. Vielstich, H. Yokokawa, H.A. Gasteiger (Eds) Handbook of fuel cells; fundamentals, technology and applications Chichester: Wiley 933-957.
10. S. McIntosh and R.J. Gorte (2004) Direct hydrocarbon solid oxide fuel cells. Chem Rev 104 4845-4865.
11. W.Z. Zhu and S.C. Deevi (5-12-2003) A review on the status of anode materials for solid oxide fuel cells. Mater Sci Eng A 362 228-239.
12. M. Cimenti and J.M. Hill (2009) Direct utilization of liquid fuels in SOFC for portable applications: challenges for the selection of alternative anodes. Energies 2 377-410.
13. F.D. Kopinke, G. Zimmermann and S. Nowak (1988) On the mechanism of coke formation in steam cracking–conclusions from results obtained by tracer experiments. Carbon 26 117-124.
14. F.D. Kopinke, G. Zimmermann, G.C. Reyniers and G.F. Froment (1993) Relative rates of coke formation from hydrocarbons in steam cracking of naphtha. 2. Paraffins, naphthenes, mono-, di-, and cycloolefins, and acetylenes. Ind Eng Chem Res 32 56-61.
15. F.D. Kopinke, G. Zimmermann, G.C. Reyniers and G.F. Froment (1993) Relative rates of coke formation from hydrocarbons in steam cracking of naphtha. 3. Aromatic hydrocarbons. Ind Eng Chem Res 32 2620-2625.
16. G.K. Gupta, A.M. Dean, K. Ahn and R.J. Gorte (2006) Comparison of conversion and deposit formation of ethanol and butane under SOFC conditions. J Power Sources 158 497-503.
17. G.K. Gupta, J.R. Marda, A.M. Dean, A.M. Colclasure, H. Zhu and R.J. Kee (2006) Performance predictions of a tubular SOFC operating on a partially reformed JP-8 surrogate. J Power Sources 162 553-562.
18. M.B. Pomfret, J. Marda, G.S. Jackson, B.W. Eichhorn, A.M. Dean and R.A. Walker (2008) Hydrocarbon fuels in solid oxide fuel cells: in situ Raman studies of graphite formation and oxidation. J Phys Chem C 112 5232-5240.
19. K.L. Randolph and A.M. Dean (2007) Hydrocarbon fuel effects in solid-oxide fuel cell operation: an experimental and modeling study of n-hexane pyrolysis. Phys Chem Chem Phys 9 4245-4258.
20. C.Y. Sheng and A.M. Dean (2004) Importance of gas-phase kinetics within the anode channel of a solid-oxide fuel cell. J Phys Chem A 108 3772-3783.
21. K.M. Walters, A.M. Dean, H. Zhu and R.J. Kee (20-9-2003) Homogeneous kinetics and equilibrium predictions of coking propensity in the anode channels of direct oxidation solid-oxide fuel cells using dry natural gas. J Power Sources 123 182-189.
22. K. Eguchi, H. Kojo, T. Takeguchi, R. Kikuchi and K. Sasaki (2002) Fuel flexibility in power generation by solid oxide fuel cells. Solid State Ionics 152–153 411-416.
23. R. Kikuchi and K. Eguchi (2004) Solid oxide fuel cell as a multi-fuel applicable power generation device. J Jpn Pet Inst 47 225-238.
24. K. Sasaki and Y. Teraoka (2003) Equilibria in fuel cell gases. J Electrochem Soc 150 A885-A888.
25. T. Takeguchi, Y. Kani, T. Yano, R. Kikuchi, K. Eguchi, K. Tsujimoto, et al. (2002) Study on steam reforming of CH4 and C2 hydrocarbons and carbon deposition on Ni-YSZ cermets. J Power Sources 112 588-595.
26. J. Mermelstein, M. Millan and N.P. Brandon (2009) The impact of carbon formation on Ni-YSZ anodes from biomass gasification model tars operating in dry conditions. Chem Eng Sci 64 492-500.
27. H. He and J.M. Hill (2007) Carbon deposition on Ni/YSZ composites exposed to humidified methane. Appl Catal A: Gen 317 284-292.
28. C.M. Finnerty, N.J. Coe, R.H. Cunningham and R.M. Ormerod (1998) Carbon formation on and deactivation of nickel-based/zirconia anodes in solid oxide fuel cells running on methane. Catal Today 46 137-145.
29. C.M. Finnerty, R.H. Cunningham and R.M. Ormerod (2000) Development of a novel test system for in situ catalytic, electrocatalytic and electrochemical studies of internal fuel reforming in solid oxide fuel cells. Catal Lett 66 221-226.
30. C.M. Finnerty and R.M. Ormerod (2000) Internal reforming over nickel/zirconia anodes in SOFCs operating on methane: influence of anode formulation, pre-treatment and operating conditions J. Power Sources 86 390-394.
31. O.A. Marina and M. Mogensen (1999) High-temperature conversion of methane on a composite gadolinia-doped ceria – gold electrode. Appl Catal A: Gen 189 117-126.
32. Ukai K, Mizutani Y, Kume Y. Current Status of SOFC development using Scandia Doped Zirconia. In: Yokokawa H, Singhal SC, editors. Proceedings – electrochemical society, solid oxide fuel cells VII. Electrochem Soc 2001;16:375–83.
33. K. Eguchi, K. Tanaka, T. Matsui and R. Kikuchi (2009) Reforming activity and carbon deposition on cermet catalysts for fuel electrodes of solid oxide fuel cells. Catal Today 146 154-159.
34. K. Ke, A. Gunji, H. Mori, S. Tsuchida, H. Takahashi, K. Ukai, et al. (2006) Effect of oxide on carbon deposition behavior of CH4 fuel on Ni/ScSZ cermet anode in high temperature SOFCs. Solid State Ionics 177 541-547.
35. A. Weber, B. Sauer, A.C. Muller, D. Herbstritt and E. Ivers-Tiffee (2002) Oxidation of H2, CO and methane in SOFCs with Ni/YSZ-cermet anodes. Solid State Ionics 152–153 543-550.
36. A. Gunji, C. Wen, J. Otomo, T. Kobayashi, K. Ukai, Y. Mizutani, et al. (2004) Carbon deposition behaviour on Ni-ScSZ anodes for internal reforming solid oxide fuel cells. J Power Sources 131 285-288.
37. H. Sumi, K. Ukai, Y. Mizutani, H. Mori, C.J. Wen, H. Takahashi, et al. (2004) Performance of nickel-scandia-stabilized zirconia cermet anodes for SOFCs in 3% H2O-CH4. Solid State Ionics 174 151-156.
38. Y. Tabata, H. Orui, K. Watanabe, R. Chiba, M. Arakawa and Y. Yamazaki (2004) Direct internal reforming characteristics of SOFC with a thin SASZ electrolyte and a LNF cathode. J Electrochem Soc 151 A418-A421.
39. I. Gavrielatos and S. Neophytides (2007) High tolerant to carbon deposition Ni-based electrodes under internal steam reforming conditions. ECS Trans 7 1483-1490.
40. I. Gavrielatos, V. Drakopoulos and S.G. Neophytides (2008) Carbon tolerant Ni-Au SOFC electrodes operating under internal steam reforming conditions. J Catal 259 75-84.
41. H.S. Bengaard, J.K. Nørskov, J. Sehested, B.S. Clausen, L.P. Nielsen, A.M. Molenbroek, et al. (25-7-2002) Steam reforming and graphite formation on Ni catalysts. J Catal 209 365-384.
42. H. Kan and H. Lee (2010) Sn-doped Ni/YSZ anode catalysts with enhanced carbon deposition resistance for an intermediate temperature SOFC. Appl Catal B: Env 97 108-114.
43. E. Nikolla, J.W. Schwank and S. Linic (31-7-2008) Hydrocarbon steam reforming on Ni alloys at solid oxide fuel cell operating conditions. Catal Today 136 243-248.
44. K. Girona, J. Laurencin, M. Petitjean, J. Fouletier and F. Lefebvre-Joud (2009) SOFC running on biogas: identification and experimental validation of “safe” operating conditions. S.C. Singhal, H. Yokokawa (Eds) ECS Transactions. Electrochem Soc 1041-1050. 25
45. I.V. Yentekakis, T. Papadam and G. Goula (2008) Electricity production from wastewater treatment via a novel biogas-SOFC aided process. Solid State Ionics 179 1521-1525.
46. A. Lanzini and P. Leone (2010) Experimental investigation of direct internal reforming of biogas in solid oxide fuel cells. Int J Hydrogen Energy 35 2463-2476.
47. C. Xu, J.W. Zondlo, M. Gong, F. Elizalde-Blancas, X. Liu and I.B. Celik (2010) Tolerance tests of H2S-laden biogas fuel on solid oxide fuel cells. J Power Sources 195 4583-4592.
48. Y. Shiratori, Y. Teraoka and K. Sasaki (2006) Ni1-x-yMgxAlyO-ScSZ anodes for solid oxide fuel cells. Solid State Ionics 177 1371-1380.
49. Y. Shiratori and K. Sasaki (2007) Microstructure and electrochemical properties of Ni1-xMgxO-ScSZ cermet anodes for biogas fueled SOFCs. ECS Transactions. Electrochem Soc 7 1701-1710.
50. Y. Shiratori, T. Oshima and K. Sasaki (2008) Feasibility of direct-biogas SOFC. Int J Hydrogen Energy 33 6316-6321.
51. Y. Shiratori and K. Sasaki (2008) NiO-ScSZ and Ni0.9Mg0.1O-ScSZ-based anodes under internal dry reforming of simulated biogas mixtures. J Power Sources 180 738-741.
52. C.J. Laycock, J.Z. Staniforth and R.M. Ormerod (2008) Improving the sulphur tolerance of nickel catalysts for running solid oxide fuel cells on waste biogas. ECS transactions. Electrochem Soc 16 177-188.
53. J.R. Rostrup-Nielsen and I. Alstrup (1999) Innovation and science in the process industry steam reforming and hydrogenolysis. Catal Today 53 311-316.
54. T. Hibino, A. Hashimoto, M. Yano, M. Suzuki and M. Sano (2003) Ru-catalyzed anode materials for direct hydrocarbon SOFCs. Electrochim Acta 48 2531-2537.
55. K. Yamaji, H. Kishimoto, Y. Xiong, T. Horita, N. Sakai, M.E. Brito, et al. (2006) Feasibility of Ni-based cermet anode for direct HC SOFCs: fueling ethane at a low S/C condition to Ni-ScSZ anode-supported cell. J Power Sources 159 885-890.
56. T. Iida, M. Kawano, T. Matsui, R. Kikuchi and K. Eguchi (2007) Internal reforming of SOFCs: carbon deposition on fuel electrode and subsequent deterioration. J Electrochem Soc 154 B234-B241.
57. N.J.J. Dekker, J.P. Ouweltjes and G. Rietveld (2007) Conversion of simulated biogas in a SOFC: the effect of organic compounds. ECS transactions. Electrochem Soc 7 1465-1473.
58. M. Liu, L. Yang, S. Wang, K. Blinn, M. Liu, Z. Liu, et al. (2009) Enhanced sulfur and coking tolerance of a mixed ion conductor for SOFCs: BaZr0.1Ce0.7Y0.2-xYbxO3-delta. Science 326 126-129.
59. D. Shekhawat, D.A. Berry, D.J. Haynes and J.J. Spivey (2009) Fuel constituent effects on fuel reforming properties for fuel cell applications. Fuel 88 817-825.
60. P.V. Aravind, J.P. Ouweltjes, N. Woudstra and G. Rietveld (2008) Impact of biomass-derived contaminants on SOFCs with Ni/gadolinia-doped ceria anodes. Electrochem Solid-State Lett 11 B24-B28.
61. P. Hofmann, K.D. Panopoulos, P.V. Aravind, M. Siedlecki, A. Schweiger, J. Karl, et al. (2009) Operation of solid oxide fuel cell on biomass product gas with tar levels >10 g Nm−3. Int J Hydrogen Energy 34 9203-9212.
62. J. Mermelstein, N. Brandon and M. Millan (2009) Impact of steam on the interaction between biomass gasification tars and nickel-based solid oxide fuel cell anode materials. Energy Fuels 23 5042-5048.
63. J. Mermelstein, M. Millan and N. Brandon (15-3-2010) The impact of steam and current density on carbon formation from biomass gasification tar on Ni/YSZ, and Ni/CGO solid oxide fuel cell anodes. J Power Sources 195 1657-1666.
64. B. Huang, X.- Zhu X-j., W.- Hu W-q., Y.- Wang Y-y. and Q.- Yu Q-c. (2010) Characterization of the Ni-ScSZ anode with a LSCM-CeO2 catalyst layer in thin film solid oxide fuel cell running on ethanol fuel. J Power Sources 195 3053-3059.
65. M. Cimenti and J.M. Hill (2009) Thermodynamic analysis of solid oxide fuel cells operated with methanol and ethanol under direct utilization, steam reforming, dry reforming or partial oxidation conditions. J Power Sources 186 377-384.
66. M. Cimenti and J.M. Hill (2010) Importance of pyrolysis and catalytic decomposition for the direct utilization of methanol in solid oxide fuel cells. J Power Sources 195 54-61.
67. Hansen JB, Pålsson J. Oxygenates and ammonia as SOFC fuels. Proceedings European Fuel Cell Technology Application Conference. Book of Abstracts, Rome; 2005.
68. J. Rechberger, R. Schauperl, J.B. Hansen and P.K. Larsen (2009) Development of a methanol SOFC APU demonstration system. S.C. Singhal, H. Yokokawa (Eds) ECS transactions. Electrochem Soc 25 1085-1092.
69. M. Cimenti and J.M. Hill (2009) Direct utilization of ethanol on ceria-based anodes for solid oxide fuel cells. Asia-Pac J Chem Eng 4 45-54.
70. R.J. Gorte and J.M. Vohs (2003) Novel SOFC anodes for the direct electrochemical oxidation of hydrocarbons. J Catal 216 477-486.
71. R.D. Farr and C.G. Vayenas (1980) Ammonia high temperature solid electrolyte fuel cell. J Electrochem Soc 127 1478-1483.
72. R. Metkemeijer and P. Achard (1994) Comparison of ammonia and methanol applied indirectly in a hydrogen fuel cell. Int J Hydrogen Energy 19 535-542.
73. R. Metkemeijer and P. Achard (1994) Ammonia as a feedstock for a hydrogen fuel cell; reformer and fuel cell behavior. J Power Sources 49 271-282.
74. N.M. Gamanovich and G.I. Novikov (1997) Electrochemical oxidation of ammonia in high-temperature fuel cells. Russ J Appl Chem 70 1136-1137.
75. N.M. Gamanovich, V.A. Gorbunova and G.I. Novikov (2001) Oxidation of alcohol-ammonia mixtures in high-temperature fuel cell with various electrodes. Russ J Appl Chem 74 746-749.
76. A. Wojcik, H. Middleton, I. Damopoulos and J. Van Herle (2003) Ammonia as a fuel in solid oxide fuel cells. J Power Sources 118 342-348.
77. N. Dekker and B. Rietveld (2005) Highly efficient conversion of ammonia in electricity by solid oxide fuel cells. Rome: In Proc. Eur Fuel Cell Technol Appl Conf Book Abstr 52-62.
78. N. Dekker and G. Rietveld (2006) Highly efficient conversion of ammonia in electricity by solid oxide fuel cells. J Fuel Cell Sci Tech 3 499-502.
79. Christiansen N, Hansen JB, Kristensen SH-LH, Linderoth S, Hendriksen PV, Larsen PH, et-al. SOFC development program at Haldor Topsøe/Risø national laboratory – progress, fuel cell seminar. FL: Palm Springs; 2005.
80. J.B. Hansen and J. Pålsson (2005) Oxygenates and ammonia as SOFC fuels Rome: Proc Eur Fuel Cell Technol Appl Conf Book Abstr 49-51.
81. Y. Yoo, M. Tuck, N. Lim, A. McFarlan and N. Maffei (2007) Fabrication of anode supported direct ammonia solid oxide fuel cells based on proton conducting Y-doped BaCeO3 electrolyte. K. Eguchi, J. Mizusaki, S. Singhal, H. Yokokawa (Eds) ECS Transactions vol. 7 2305-2312.
82. Y. Yoo, N. Lim, M. Phongaksorn, A. McFarlan and N. Maffei (2008) High performance direct ammonia fueled solid oxide fuel cells based on proton conducting solid electrolytes. M. Williams, K. Krist, S. Satyapal, N. Garland (Eds) ECS Transactions. Electrochem Soc 12 691-700.
83. M. Liu, R. Peng, D. Dong, J. Gao, X. Liu and G. Meng (2008) Direct liquid methanol-fueled solid oxide fuel cell. J Power Sources 185 188-192.
84. Q. Ma, R. Peng, L. Tian and G. Meng (2006) Direct utilization of ammonia in intermediate-temperature solid oxide fuel cells. Electrochem Comm 8 1791-1795.
85. Q. Ma, R. Peng, Y. Lin, J. Gao and G. Meng (2006) A high-performance ammonia-fueled solid oxide fuel cell. J Power Sources 161 95-98.
86. Q. Ma, J. Ma, S. Zhou, R. Yan, J. Gao and G. Meng (2007) A high-performance ammonia-fueled SOFC based on a YSZ thin-film electrolyte. J Power Sources 164 86-89.
87. G. Meng, C. Jiang, J. Ma, Q. Ma and X. Liu (2007) Comparative study on the performance of a SDC-based SOFC fueled by ammonia and hydrogen. J Power Sources 173 189-193.
88. G. Meng, G. Ma, Q. Ma, R. Peng and X. Liu (2007) Ceramic membrane fuel cells based on solid proton electrolytes. Solid State Ionics 178 697-703.
89. G. Meng, R. Peng, C. Xia and X. Liu (2009) Research activities and progress on solid oxide fuel cells at USTC. P. Singh, N.P. Bansal, T. Ohji, A. Wereszczak (Eds) Advances in solid oxide fuel cells IV New York: Wiley 3-17.
90. K. Xie, Q. Ma, B. Lin, Y. Jiang, J. Gao, X. Liu, et al. (2007) An ammonia fuelled SOFC with a BaCe0.9Nd0.1O3-delta thin electrolyte prepared with a suspension spray. J Power Sources 170 38-41.
91. K. Xie, R. Yan, G. Meng and X. Liu (2009) Direct ammonia proton-conducting solid oxide fuel cells prepared by a modified suspension spray. Ionics 15 115-119.
92. L. Zhang, Y. Cong, W. Yang and L. Lin (2007) A direct ammonia tubular solid oxide fuel cell. Chin J Catal 28 749-751.
93. L. Zhang and W. Yang (2008) Direct ammonia solid oxide fuel cell based on thin proton-conducting electrolyte. J Power Sources 179 92-95.
94. M. Ni, M.K.H. Leung and D.Y.C. Leung (2009) Ammonia-fed solid oxide fuel cells for power generation-A review. Int J Energy Res 33 943-959.
95. A.L. Lee, R.F. Zabransky and W.J. Huber (1990) Internal reforming development for solid oxide fuel cells. Ind Eng Chem Res 29 766-773.
96. M.J. Saeki, H. Uchida and M. Watanabe (1994) Noble metal catalysts highly-dispersed on Sm-doped ceria for the application to internal reforming solid oxide fuel cells operated at medium temperature. Catal Lett 26 149-157.
97. E. Achenbach (1994) Three-dimensional and time-dependent simulation of a planar solid oxide fuel cell stack. J Power Sources 49 333-348.
98. R. Ødegård, E. Johnsen and H. Karoliussen (1995) Methane Reforming on Ni/Zirconia SOFC anodes. M. Dokiya, O. Yamamoto, H. Tagawa, S.C. Singhal (Eds) Proc Fourth Int Sym on Solid Oxide Fuel Cells (SOFC IV) The Electrochemical Society 810-819.
99. V.D. Belyaev, T.I. Politova, O.A. Marina and V.A. Sobyanin (1995) Internal steam reforming of methane over Ni-based electrode in solid oxide fuel cells. Appl Catal A: Gen 133 47-57.
100. A.L. Dicks, K.D. Pointon and A. Siddle (2000) Intrinsic reaction kinetics of methane steam reforming on a nickel/zirconia anode. J Power Sources 86 523-530.
101. K. Ahmed and K. Foger (2000) Kinetics of internal steam reforming of methane on Ni/YSZ-based anodes for solid oxide fuel cells. Catal Today 63 479-487.
102. N. Laosiripojana and S. Assabumrungrat (2005) Methane steam reforming over Ni/Ce-ZrO2 catalyst: influences of Ce-ZrO2 support on reactivity, resistance toward carbon formation, and intrinsic reaction kinetics. Appl Catal A: Gen 290 200-211.
103. N. Nakagawa, H. Sagara and K. Kato (2001) Catalytic activity of Ni-YSZ-CeO2 anode for the steam reforming of methane in a direct internal-reforming solid oxide fuel cell. J Power Sources 92 88-94.
104. H. Timmermann, D. Fouquet, A. Weber, E. Ivers-Tiffée, U. Hennings and R. Reimert (2006) Internal reforming of methane at Ni/YSZ and Ni/CGO SOFC cermet anodes. Fuel Cells 6 307-313.
105. M. Boder and R. Dittmeyer (2006) Catalytic modification of conventional SOFC anodes with a view to reducing their activity for direct internal reforming of natural gas. J Power Sources 155 13-22.
106. D.L. King, J.J. Strohm, X. Wang, H.S. Roh, C. Wang, Y.H. Chin, et al. (2008) Effect of nickel microstructure on methane steam-reforming activity of Ni-YSZ cermet anode catalyst. J Catal 258 356-365.
107. J. Wei and E. Iglesia (2004) Isotopic and kinetic assessment of the mechanism of reactions of CH4 with CO2 or H2O to form synthesis gas and carbon on nickel catalysts. J Catal 224 370-383.
108. H. Timmermann, W. Sawady, R. Reimert and E. Ivers-Tiffee (2010) Kinetics of (reversible) internal reforming of methane in solid oxide fuel cells under stationary and APU conditions. J Power Sources 195 214-222.
109. Y. Matsuzaki, Y. Baba and T. Sakurai (2005) Diffusion characteristics in anode-substrates for anode-supported SOFCs. Electrochemistry 73 484-488.
110. E.S. Hecht, G.K. Gupta, H. Zhu, A.M. Dean, R.J. Kee, L. Maier, et al. (2005) Methane reforming kinetics within a Ni-YSZ SOFC anode support. Appl Catal A: Gen 295 40-51.
111. R. Peters, R. Dahl, U. Klüttgen, C. Palm and D. Stolten (2002) Internal reforming of methane in solid oxide fuel cell systems. J Power Sources 106 238-244.
112. J. Sehested (2003) Sintering of nickel steam-reforming catalysts. J Catal 217 417-426.
113. J. Sehested, J.A.P. Gelten, I.N. Remediakis, H. Bengaard and J.K. Norskov (2004) Sintering of nickel steam-reforming catalysts: effects of temperature and steam and hydrogen pressures. J Catal 223 432-443.
114. J. Sehested, J.A.P. Gelten and S. Helveg (2006) Sintering of nickel catalysts: effects of time, atmosphere, temperature, nickel-carrier interactions, and dopants. Appl Catal A: Gen 309 237-246.
115. S. Bebelis and S. Neophytides (2002) AC impedance study of Ni-YSZ cermet anodes in methane-fuelled internal reforming YSZ fuel cells. Solid State Ionics 152–153 447-453.
116. G. Jones, J.G. Jakobsen, S.S. Shim, J. Kleis, M.P. Andersson, J. Rossmeisl, et al. (2008) First principles calculations and experimental insight into methane steam reforming over transition metal catalysts. J Catal 259 147-160.
117. D. Mogensen, J.D. Grunwaldt, P.V. Hendriksen, K. Dam-Johansen and J.U. Nielsen (2010) Internal steam reforming in solid oxide fuel cells: Status and opportunities of kinetic studies and their impact on modeling. J Power Sources 196 25-38.
118. P.V. Hendriksen (1997) Model Studies of internal steam reforming in SOFC stacks. U. Stimming, S. Singhal, H. Tagawa, W. Lehnert (Eds) In Proc. Fifth Int. Sym. Solid Oxide Fuel Cells (SOFC-V) 18 The Electrochemistry Society 1319-1328.
119. J.M. Klein, M. Henault, P. Gelin, Y. Bultel and S. Georges (2008) A solid oxide fuel cell operating in gradual internal reforming conditions under pure dry methane. Electrochem Solid-State Lett 11
120. Zaza F, Paoletti C, Presti RL, Simoetti E, Pasquali M. Bioenergy from fuel cells: effects of hydrogen sulfide impurities on performance of MCFC fed with biogas, fundamentals and developments of fuel cells conference – FDFC2008, Nancy (France), Dec 10–12, 2008.
121. P. Lohsoontorn, D.J.L. Brett and N.P. Brandon (2008) Thermodynamic predictions of the impact of fuel composition on the propensity of sulphur to interact with Ni and ceria-based anodes for solid oxide fuel cells. J Power Sources 175 60-67.
122. J.H. Wang and M. Liu (2007) Computational study of sulfur-nickel interactions: a new S-Ni phase diagram. Electrochem Comm 9 2212-2217.
123. N.M. Galea, E.S. Kadantsev and T. Ziegler (2007) Studying reduction in solid oxide fuel cell activity with density functional theory-effects of hydrogen sulfide adsorption on nickel anode surface. J Phys Chem C 111 14457-14468.
124. T. Rosenquist (1954) A thermodynamic study of the iron, cobalt, and nickel sulfides. J Iron Steel Inst (London) 176 37-57.
125. Y. Matsuzaki and I. Yasuda (2000) Poisoning effect of sulfur-containing impurity gas on a SOFC anode: part I. Dependence on temperature, time, and impurity concentration. Solid State Ionics 132 261-269.
126. J. Dong, S. Zha and M. Liu (2005) Study of sulfur-nickel interactions using Raman spectroscopy. S.C. Singhal, J. Mizusaki (Eds) In Proc Electrochem Soc The Electrochemistry Society 1284-1293.
127. J. Dong, Z. Cheng, S. Zha and M. Liu (2006) Identification of nickel sulfides on Ni-YSZ cermet exposed to H2 fuel containing H2S using Raman spectroscopy. J Power Sources 156 461-465.
128. Z. Cheng and M. Liu (2007) Characterization of sulfur poisoning of Ni-YSZ anodes for solid oxide fuel cells using in situ Raman microspectroscopy. Solid State Ionics 178 925-935.
129. Z. Cheng, H. Abernathy and M. Liu (2007) Raman spectroscopy of nickel sulfide Ni3S2. J Phys Chem C 111 17997-18000.
130. M. Liu, H. Abernathy, Z. Cheng and X. Lou (2007) The use of Raman spectroscopy in the analysis of SOFC anode reactions. Prepr Symp – Am Chem Soc Div Fuel Chem 52 59-60.
131. R.C. Maher, L.F. Cohen, P. Lohsoontorn, D.J.L. Brett and N.P. Brandon (2008) Raman spectroscopy as a probe of temperature and oxidation state for gadolinium-doped ceria used in solid oxide fuel cells. J Phy Chem A 112 1497-1501.
132. D.G. Ivey, E. Brightman and N. Brandon (2010) Structural modifications to nickel cermet anodes in fuel cell environments. J Power Sources 195 6301-6311.
133. D. Stolten, R. Spah and R. Schamm (1997) Status of SOFC development at Daimler-Benz/Dornier. U. Stimming, S. Singhal, H. Tagawa, W. Lehnert (Eds) In Proc 5th Int Symp Solid Oxide Fuel Cells V The Electrochemical Society 88-93.
134. S. Zha, Z. Cheng and M. Liu (2007) Sulfur poisoning and regeneration of ni-based anodes in solid oxide fuel cells. J Electrochem Soc 154 B201-B206.
135. J.B. Hansen (2008) Correlating sulfur poisoning of SOFC nickel anodes by a temkin isotherm. Electrochem Solid-State Lett 11 B178-B180.
136. Z. Cheng, S. Zha and M. Liu (2007) Influence of cell voltage and current on sulfur poisoning behavior of solid oxide fuel cells. J Power Sources 172 688-693.
137. J.F.B. Rasmussen and A. Hagen (2009) The effect of H2S on the performance of Ni-YSZ anodes in solid oxide fuel cells. J Power Sources 191 534-541.
138. K. Sasaki, K. Susuki, A. Iyoshi, M. Uchimura, N. Imamura, H. Kusaba, et al. (2006) H2S poisoning of solid oxide fuel cells. J Electrochem Soc 153 A2023-A2029.
139. K. Sasaki, K. Susuki, A. Iyoshi, M. Uchimura, N. Imamura, H. Kusaba, et al. (2005) Sulfur tolerance of solid oxide fuel cells. S.C. Singhal, J. Mizusaki (Eds) In Proc of the 9th Int. Sym. Solid Oxide Fuel Cells 7 The Electrochemical Society 1267-1274.
140. J.N. Kuhn, N. Lakshminarayanan and U.S. Ozkan (2008) Effect of hydrogen sulfide on the catalytic activity of Ni-YSZ cermets. J Mol Catal A: Chem 282 9-21.
141. H. He, R.J. Gorte and J.M. Vohs (2005) Highly sulfur tolerant Cu-ceria anodes for SOFCs. Electrochem Solid-State Lett 8 A279-A280.
142. H.P. He, A. Wood, D. Steedman and M. Tilleman (2007) Sulphur tolerant shift reaction catalysts for nickel-based SOFC anode. Solid State Ionics 179 1478-1482.
143. J.P. Trembly, A.I. Marquez, T.R. Ohrn and D.J. Bayless (2006) Effects of coal syngas and H2S on the performance of solid oxide fuel cells: single-cell tests. J Power Sources 158 263-273.
144. A.I. Marquez, T.R. Ohrn, J.P. Trembly, D.C. Ingram and D.J. Bayless (2007) Effects of coal syngas and H2S on the performance of solid oxide fuel cells. Part 2. Stack tests. J Power Sources 164 659-667.
145. J.P. Ouweltjes, P.V. Aravind, N. Woudstra and G. Rietveld (2006) Biosyngas utilization in solid oxide fuel cells with Ni/GDC anodes. J Fuel Cell Sci Technol 3 495-498.
146. P.V. Aravind, J.P. Ouweltjes, E. De Heer, N. Woudstra and G. Rietveld (2005) Impact of biosyngas and its components on sofc anodes. S.C. Singhal, J. Mizusaki (Eds) In Proc.of the 9th Int Sym Solid Oxide Fuel Cells 7 The Electrochemical Society 1459-1467.
147. P. Hofmann, A. Schweiger, L. Fryda, K.D. Panopoulos, U. Hohenwarter, J.D. Bentzen, et al. (2007) High temperature electrolyte supported Ni-GDC/YSZ/LSM SOFC operation on two-stage Viking gasifier product gas. J Power Sources 173 357-366.
148. A. Norheim, I. Wærnhus, M. Brostrom, J.E. Hustad and A. Vik (2007) Experimental studies on the influence of H2S on solid oxide fuel cell performance at 800 °C. Energy Fuels 21 1098-1101.
149. Sishtla CI, Krist K, Suchorabski DA, Pondo JM. Fuel cell seminar. Palm Springs, CA; 2005.
150. Silversand F, Hansen JB, Jannasch AK, Pålsson J. Fuel cell seminar. Honolulu, HI; 2006.
151. J.R. Rostrup-Nielsen, J.B. Hansen, S. Helveg, N. Christiansen and A.K. Jannasch (2006) Sites for catalysis and electrochemistry in solid oxide fuel cell (SOFC) anode. Appl Phys A: Mater Sci Proc 85 427-430.
152. M. Noponen, J. Kiviaho, M. Halinen and J. Saarinen (2005) Durability of anode supported solid oxide fuel cells on pre-reformed natural gas. Proc. Eur. Fuel Cell Technol. Applic. Conf. Book Abstr
153. M. Noponen, M. Halinen, J. Kiviaho and J. Saarinen (2006) Feasibility of autothermally reformed natural gas on anode supported solid oxide fuel cells. J Fuel Cell Sci Technol 3 438-444.
154. J.R. Rostrup-Nielsen (1984) Sulfur-passivated nickel catalysts for carbon-free steam reforming of methane. J Catal 85 31-43.
155. J.P. Trembly, R.S. Gemmen and D.J. Bayless (2007) The effect of IGFC warm gas cleanup system conditions on the gas-solid partitioning and form of trace species in coal syngas and their interactions with SOFC anodes. J Power Sources 163 986-996.
156. A. Martinez, K. Gerdes, R. Gemmen and J. Poston (2010) Thermodynamic analysis of interactions between Ni-based solid oxide fuel cells (SOFC) anodes and trace species in a survey of coal syngas. J Power Sources 195 5206-5212.
157. F.N. Cayan, M. Zhi, S.R. Pakalapati, I. Celik, N. Wu and R. Gemmen (2008) Effects of coal syngas impurities on anodes of solid oxide fuel cells. J Power Sources 185 595-602.
158. J.P. Trembly, R.S. Gemmen and D.J. Bayless (2007) The effect of coal syngas containing HCl on the performance of solid oxide fuel cells: investigations into the effect of operational temperature and HCl concentration. J Power Sources 169 347-354.
159. O.A. Marina, L.R. Pederson, E.C. Thomsen, C.A. Coyle and K.J. Yoon (2010) Reversible poisoning of nickel/zirconia solid oxide fuel cell anodes by hydrogen chloride in coal gas. J Power Sources 195 7033-7037.
160. O.A. Marina, L.R. Pederson, E.C. Thomsen, D.J. Edwards, C.A. Coyle and C.N. Cramer (2010) SOFC ohmic resistance reduction by HCl-induced removal of manganese at the anode/electrolyte interface. Electrochem Solid-State Lett 13 B63-B67.
161. K. Haga, Y. Shiratori, K. Ito and K. Sasaki (2008) Chlorine poisoning of SOFC Ni-cermet anodes. J Electrochem Soc 155 B1233-B1239.
162. K. Haga, S. Adachi, Y. Shiratori, K. Itoh and K. Sasaki (2008) Poisoning of SOFC anodes by various fuel impurities. Solid State Ionics 179 1427-1431.
163. J. Bao, G.N. Krishnan, P. Jayaweera, J. Perez-Mariano and A. Sanjurjo (2009) Effect of various coal contaminants on the performance of solid oxide fuel cells: Part I. accelerated testing. J Power Sources 193 607-616.
164. C. Xu, M. Gong, J.W. Zondlo, X. Liu and H.O. Finklea (2010) The effect of HCl in syngas on Ni-YSZ anode-supported solid oxide fuel cells. J Power Sources 195 2149-2158.
165. J. Bao, G.N. Krishnan, P. Jayaweera and A. Sanjurjo (2010) Effect of various coal gas contaminants on the performance of solid oxide fuel cells: Part III. synergistic effects. J Power Sources 195 1316-1324.
166. H. Kishimoto, K. Yamaji, M.E. Brito, T. Horita and H. Yokokawa (2008) Generalized ellingham diagrams for utilization in solid oxide fuel cells. J Mining Metall Sect B: Metall 44 39-48.
167. M. Zhi, X. Chen, H. Finklea, I. Celik and N.Q. Wu (2008) Electrochemical and microstructural analysis of nickel-yttria-stabilized zirconia electrode operated in phosphorus-containing syngas. J Power Sources 183 485-490.
168. O. Demircan, C. Xu, J. Zondlo and H.O. Finklea (2009) In situ Van der Pauw measurements of the Ni/YSZ anode during exposure to syngas with phosphine contaminant. J. Power Sources 194 214-219.
169. O. Demircan, W. Zhang, C. Xu, J. Zondlo and H.O. Finklea (2010) The effect of overpotential on performance degradation of the solid oxide fuel cell Ni/YSZ anode during exposure to syngas with phosphine contaminant. J Power Sources 195 3091-3096.
170. J. Bao, G.N. Krishnan, P. Jayaweera, K.H. Lau and A. Sanjurjo (2009) Effect of various coal contaminants on the performance of solid oxide fuel cells: Part II. ppm and sub-ppm level testing. J Power Sources 193 617-624.
171. O.A. Marina, C.A. Coyle, E.C. Thomsen, D.J. Edwards, G.W. Coffey and L.R. Pederson (2010) Degradation mechanisms of SOFC anodes in coal gas containing phosphorus. Solid State Ionics 181 430-440.
172. W. Liu, X. Sun, L.R. Pederson, O.A. Marina and M.A. Khaleel (2010) Effect of nickel-phosphorus interactions on structural integrity of anode-supported solid oxide fuel cells. J Power Sources 195 7140-7145.
173. M. Gong, D. Bierschenk, J. Haag, K.R. Poeppelmeier, S.A. Barnett, C. Xu, et al. (2010) Degradation of LaSr2Fe2CrO9-delta solid oxide fuel cell anodes in phosphine-containing fuels. J Power Sources 195 4013-4021.
174. J.P. Trembly, R.S. Gemmen and D.J. Bayless (2007) The effect of coal syngas containing AsH3 on the performance of SOFCs: investigations into the effect of operational temperature, current density and AsH3 concentration. J Power Sources 171 818-825.
175. C.A. Coyle, O.A. Marina, E.C. Thomsen, D.J. Edwards, C.D. Cramer, G.W. Coffey, et al. (2009) Interactions of nickel/zirconia solid oxide fuel cell anodes with coal gas containing arsenic. J Power Sources 193 730-738.
176. Gerdes K, Trembly J, Gemmen R. Effect of H2Se exposure on performance of anode supported SOFC. In: Proceedings of the coal based fuel cell technology: status, needs and future applications. Morgantown, WV; 2007.
177. O.A. Marina, L.R. Pederson, C.A. Coyle, E.C. Thomsen and G.W. Coffey (2009) Ni/YSZ anode interactions with impurities in coal gas. ECS Trans 25 2125-2130.
178. C. Xu, J.W. Zondlo, M. Gong, X. Liu and I.B. Celik (2010) Tolerance tests of co-feeding Cl2 and H2S impurities in biogas on a Ni-YSZ anode-supported solid oxide fuel cell. Eight Int.l Fuel Cell Sci Brooklyn, New York: Eng. Tech. Conf
179. A. Atkinson, S. Barnett, R.J. Gorte, J.T.S. Irvine, A.J. McEvoy, M. Mogensen, et al. (2004) Advanced anodes for high-temperature fuel cells. Nature Mater 3 17-27.