Experimental investigation and multi-objective analysis on drilling of boron carbide reinforced metal matrix composites using grey relational analysis

Measurement: Journal of the International Measurement Confederation

Volumn 47, Issue 1, 2014, Pages 321-330

  Taşkesen, Ahmet ^a   Kütükde, Kenan ^a  

^a GAZI UNIVERSITY   (Turkey)

Author keywords

Cutting force; Drilling; Grey relational analysis; Metal matrix composite; Optimization; Surface roughness

Indexed keywords

CARBIDE TOOLS; DRILLING; DRILLS; METALLIC MATRIX COMPOSITES; OPTIMIZATION; POWDER METALLURGY; REINFORCEMENT; SURFACE ROUGHNESS;

AVERAGE SURFACE ROUGHNESS; COATED CARBIDE DRILLS; CUTTING FORCES; EXPERIMENTAL INVESTIGATIONS; GREY RELATIONAL ANALYSIS; MULTI-OBJECTIVE ANALYSIS; PERFORMANCE CHARACTERISTICS; REINFORCED METAL MATRIX COMPOSITES;

BORON CARBIDE;

EID: 84884400679     PISSN: 02632241     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.measurement.2013.08.040     Document Type: Article

References (43)

1. V. Songmene, and M. Balazinski Machinability of graphitic metal matrix composites as a function of reinforcing particles CIRP Annals - Manufacturing Technology 48 1999 77 80
2. 3)p/6061 metal matrix composites Journal of Materials Processing Technology 124 2002 244 254
3. J.P. Davim Study of drilling metal-matrix composites based on the Taguchi techniques Journal of Materials Processing Technology 132 2003 250 254 (Pubitemid 35433590)
4. 4Cp reinforced aluminum metal matrix composites Journal of Materials Processing Technology 178 2006 241 246 (Pubitemid 44163129)
5. 4Cp metal matrix composites International Journal of Advanced Manufacturing Technology 49 2010 871 877
6. C.R. Dandekar, and Y.C. Shin Modeling of machining of composite materials: a review International Journal of Machine Tools and Manufacture 57 2012 102 121
7. 4C metal matrix composite Mechanics of Advanced Materials and Structures 18 2011 210 217
8. 3 composite Materials and Design 32 2011 1031 1038
9. Y. Sahin Optimization of testing parameters on the wear behaviour of metal matrix composites based on the Taguchi method Materials Science and Engineering A 408 2005 1 8 (Pubitemid 41671350)
10. 4C metal matrix composites machined by milling operation Science and Engineering of Composite Materials 15 2008 131 139
11. 4Cp composite Materials and Manufacturing Processes 23 2008 865 870
12. A. Acir, Y. Turgut, M. Übeyli, M. Günay, and U. Şeker A study on the cutting force in milling of boron carbide particle reinforced aluminum composite Science and Engineering of Composite Materials 16 2009 187 195
13. T. Rajmohan, and K. Palanikumar Optimization of machining parameters for multi-performance characteristics in drilling hybrid metal matrix composites Journal of Composite Materials 46 2012 869 878
14. S. Basavarajappa, G. Chandramohan, J.P. Davim, M. Prabu, K. Mukund, M. Ashwin, and M. Prasannakumar Drilling of hybrid aluminum matrix composites International Journal of Advanced Manufacturing Technology 35 2008 1244 1250
15. M.T. Hayajneh, A.M. Hassan, and A.T. Mayyas Artificial neural network modeling of the drilling process of self-lubricated aluminum/alumina/graphite hybrid composites synthesized by powder metallurgy technique Journal of Alloys and Compounds 478 2009 559 565
16. S. Barnes, and I.R. Pashby Through-tool coolant drilling of aluminum/SiC metal matrix composite Journal of Engineering Materials and Technology, Transactions of the ASME 122 2000 384 388
17. J.P. Davim, and A. Monteiro Baptista Cutting force, tool wear and surface finish in drilling metal matrix composites Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering 215 2001 177 183 (Pubitemid 32897423)
18. Y. Altunpak, M. Ay, and S. Aslan Drilling of a hybrid Al/SiC/Gr metal matrix composites International Journal of Advanced Manufacturing Technology 60 2012 513 517
19. G. Tosun, and M. Muratoglu The drilling of Al/SiCp metal-matrix composites. Part II: Workpiece surface integrity Composites Science and Technology 64 2004 1413 1418 (Pubitemid 38673510)
20. G. Tosun, and M. Muratoglu The drilling of an Al/SiCp metal-matrix composites. Part I: Microstructure Composites Science and Technology 64 2004 299 308 (Pubitemid 37529350)
21. S. Basavarajappa, G. Chandramohan, and J.P. Davim Some studies on drilling of hybrid metal matrix composites based on Taguchi techniques Journal of Materials Processing Technology 196 2008 332 338 (Pubitemid 350192203)
22. K. Palanikumar, and R. Karthikeyan Optimal machining conditions for turning of particulate metal matrix composites using taguchi and response surface methodologies Machining Science and Technology 10 2006 417 433 (Pubitemid 44837689)
23. S. Barnes, I.R. Pashby, and A.B. Hashim Effect of heat treatment on the drilling performance of aluminum/SiC MMC Applied Composite Materials 6 1999 121 138
24. 4C composites International Journal of Advanced Manufacturing Technology 50 2010 185 193
25. S. Ramesh, L. Karunamoorthy, and K. Palanikumar Measurement and analysis of surface roughness in turning of aerospace titanium alloy (gr5) Measurement: Journal of the International Measurement Confederation 45 2012 1266 1276
26. C.C. Tsao Taguchi analysis of drilling quality associated with core drill in drilling of composite material International Journal of Advanced Manufacturing Technology 32 2007 877 884 (Pubitemid 46516426)
27. C.C. Tsao, and H. Hocheng Evaluation of thrust force and surface roughness in drilling composite material using Taguchi analysis and neural network Journal of Materials Processing Technology 203 2008 342 348
28. 4C-reinforced Al-7xxx-series alloys based on the Taguchi method Materiali in Tehnologije/Materials and Technology 47 2013 169 176
29. T. Kivak, K. Habali, and U. Şeker Investigation of the effect of cutting parameters on surface roughness and chip formation in drilling of inconel 718 super alloy Journal of the Faculty of Engineering and Architecture of Gazi University 25 2010 293 298
30. E. Mohammad Sharifi, F. Karimzadeh, and M.H. Enayati Fabrication and evaluation of mechanical and tribological properties of boron carbide reinforced aluminum matrix nanocomposites Materials and Design 32 2011 3263 3271
31. G.B. Veeresh Kumar, C.S.P. Rao, and N. Selvaraj Studies on mechanical and dry sliding wear of Al6061-SiC composites Composites Part B Engineering 43 2012 1185 1191
32. 4C composites Materials Science and Engineering A 433 2006 70 82 (Pubitemid 44276391)
33. 4C composites with a high volume fraction of fine ceramic reinforcement Materials and Manufacturing Processes 24 2009 1337 1340
34. 3/Grp metal matrix composites Journal of Composite Materials 45 2011 2003 2010
35. A.M. Abrão, J.C.C. Rubio, P.E. Faria, and J.P. Davim The effect of cutting tool geometry on thrust force and delamination when drilling glass fibre reinforced plastic composite Materials and Design 29 2008 508 513 (Pubitemid 47611542)
36. D. Iliescu, D. Gehin, M.E. Gutierrez, and F. Girot Modeling and tool wear in drilling of CFRP International Journal of Machine Tools and Manufacture 50 2010 204 213
37. J.S. Strenkowski, C.C. Hsieh, and A.J. Shih An analytical finite element technique for predicting thrust force and torque in drilling International Journal of Machine Tools and Manufacture 44 2004 1413 1421
38. H. Tschätsch Applied Machining Technology 2009 Springer Science+Business, Media
39. T. Rajmohan, and K. Palanikumar Modeling and analysis of performances in drilling hybrid metal matrix composites using D-optimal design International Journal of Advanced Manufacturing Technology 2012 1 13
40. A.N. Haq, P. Marimuthu, and R. Jeyapaul Multi response optimization of machining parameters of drilling Al/SiC metal matrix composite using grey relational analysis in the Taguchi method International Journal of Advanced Manufacturing Technology 37 2008 250 255 (Pubitemid 351571809)
41. K. Palanikumar Experimental investigation and optimisation in drilling of GFRP composites Measurement: Journal of the International Measurement Confederation 44 2011 2138 2148
42. K. Palanikumar, B. Latha, V.S. Senthilkumar, and J.P. Davim Analysis on drilling of glass fiber-reinforced polymer (GFRP) composites using grey relational analysis Materials and Manufacturing Processes 27 2012 297 305
43. N. Tosun Determination of optimum parameters for multi-performance characteristics in drilling by using grey relational analysis International Journal of Advanced Manufacturing Technology 28 2006 450 455