Applied machining technology

Applied Machining Technology

Volumn , Issue , 2009, Pages 1-398

  Tschätsch, Heinz ^a  

^a NONE   (Germany)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 84895279256     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1007/9783642010071     Document Type: Book

References (172)

1. Bergmann, Werkstofftechnik Teil 1 und 2, Carl Hanser Verlag, München 1998
2. H. Berns, Stahlkunde für Ingenieure, Springer Verlag, Berlin-Heidelberg 1993
3. Verein Deutscher Eisenhüttenleute; Stahl-Eisen-Liste 10. Auflage 1998, Verlag Stahleisen, Düsseldorf
4. Seidel, Werkstofftechnik, 7. Aufl. 2006, Hanser Fachbuchverlag, München
5. Weißbach, Werkstoffkunde und Werkstoffprüfung 15. Aufl. 2004 Vieweg Verlag, Wiesbaden
6. Schatt/Wieters, Pulvermetallurgie, VDI-Verlag Düsseldorf - Technologie und Werkstoffe, 1994-Sintervorgänge, 1992
7. Tietz, Technische Keramik, VDI-Verlag, Düsseldorf 1994
8. Schäning, DIN-Normenheft 3 Werkstoffkurznamen und Werkstoffnummern für Eisenwerkstoffe, Verlag Stahl-Eisen, 1994
9. G. Spur/T. Stöferle, Handbuch der Fertigungstechnik Band 3 Spanen, Carl Hanser Verlag, München, 1980
10. W. König, Fertigungsverfahren, VDI-Verlag, Düsseldorf Band 1: Drehen, Fräsen, Bohren, 2002
11. Band 2: Schleifen, Honen, Läppen, 2005
12. Band 3: Abtragen und Generieren, 2006
13. Degner, Lutze, Smekal, Spanende Formung, Carl Hanser Verlag, 1993
14. Fritz, Fertigungstechnik, Springer Verlag, Berlin-Heidelberg, 2006
15. Tönshoff, Spanen, Springer Verlag, Berlin-Heidelberg, 2004
16. Warnecke/Westkämper, Einführung in die Fertigungstechnik, Teubner Verlag, Stuttgart, 2006
17. W. Krause, Fertigung in der Feinwerktechnik und Mikrotechnik, Carl Hanser Verlag, München, 1996
18. G. Spur, Keramikbearbeitung, Carl Hanser Verlag, 1989
19. Pauksch, Zerspantechnik, Vieweg Verlag, Wiesbaden, 1996
20. Reichert, Fertigungstechnik 1, Verlag Handwerk und Technik, Hamburg, 1996
21. Fachkunde Metall, Europa Lehrmittel, Haan-Gruiten, 2003
22. Krist, Formeln und Tabellen Zerspantechnik, Vieweg Verlag, Wiesbaden, 1996
23. K. Weinert, Spanende Fertigung, Vulkan Verlag, Essen, 1994
24. Salje, Begriffe der Schleif- und Konditioniertechnik, Vulkan Verlag, Essen, 1991
25. Horsemann, Hochgeschwindigkeitsschleifen mit aktiv magnetgelagerten Spindeln, Vulkan Verlag, Essen, 1993
26. M. Klyk, Hochgeschwindigkeitsschleifen mit CBN, Vulkan Verlag, Essen, 1993
27. Tikal/Kammermeier, Vollhartmetallbohrer und Fräser, Verlag moderne Industrie, Landsberg/Lech, 1993
28. Wojan/Breitkopf, übungsbuch Fertigungstechnik, Vieweg Verlag, Wiesbaden, 1996
29. Bruins/Dräger, Werkzeuge und Werkzeugmaschinen Teil 1, Carl Hanser Verlag, München, 1989
30. Tschätsch/Charchut, Werkzeugmaschinen, Carl Hanser Verlag, München, 1991
31. Weck, Werkzeugmaschinen und Fertigungssysteme
32. Band 1: Maschinenarten, Bauformen, Anwendungsbereiche, 1991
33. Band 2: Konstruktion und Berechnung, 1994 VDI-Verlag, Düsseldorf
34. Hartmetallwerkzeuge mit Richtwerten für die Zerspannung, Firmenschriften der Firmen: Widia-GmbH, Essen Kennametal Hertel, Fürth Sandvik/Coromant, Düsseldorf Sumitomo Electric-Hartmetall GmbH, Willich
35. K. F. Toellner, Weiterentwicklung der Schneidstoffe Firmenverö ffentlichung der Firma Widia GmbH, Essen
36. Firmenschrift, Naxos Union, Schleifscheiben und andere Schleifkörper Naxos-Union, Frankfurt/M.
37. Herausgeber: Fa. Ernst Winter und Sohn, Schleiftechnisches Handbuch Schleifen mit Diamant und CBN, Vulkan Verlag, Essen, 1988
38. Künanz, Knösel, Seifert, Lösche, Gaßmann: "Werkstückqualität und Produktivität beim Drahttrennläppen von nichtmetallischen und metallischen Werkstoffen". In: Jahrbuch Schleifen, Honen, Läppen und Polieren, Ausgabe 61, 2004, S. 233
39. ISO 237 Rotating tools with parallel shanks; Diameters of shanks and sizes of driving squares
40. ISO 240 Milling cutters - Interchangeability dimensions for cutter arbors or cutter mandrels
41. ISO 241 Shanks for turning and planing tools - Shapes and dimensions of the section
42. ISO/R 296 Machine tools, Morse tapers and metric tapers
43. ISO 513 Application of carbides for machining by chip removal; designation of the main groups of chip removal and groups of application; Amendment 1: Designation of hard cutting materials; Type A
44. ISO 866 Centre drills for centre holes without protecting chamfers; Type A
45. ISO 1119 Geometrical Product Specifications (GPS) - Series of conical tapers and taper angles
46. ISO/DIS 1832.2 I ndexable inserts for cutting tools - Designation; Technical Corrigendum 1
47. ISO 2306 Drills for use prior to tapping screw threads
48. ISO 2540 Centre drills for centre holes with protecting chamfer - Type B
49. ISO 2541 Centre drills for centre holes with radius form - Type R
50. ISO 3002/1 Basic quantities in cutting and grinding; Part 1: Geometry of the active part of cutting tools; general terms, reference systems, tool and working angles, chip breakers
51. ISO/DIS 4203 Parallel shank tools - Driving tenons and sockets - Dimensions
52. ISO 5413 Machine tools - positive drive of Morse tapers
53. ISO 235/1 Parallel shank jobber and stub series drills and Morse taper shank drills
54. ISO 494 Parallel shank twist drills - Long series
55. ISO 866 Centre drills for centre holes without protecting chamfers - Type A
56. ISO 2540 Centre drills for centre holes with protecting chamfer - Type B
57. ISO 2541 Centre drills for centre holes with radius form - Type R
58. ISO 3291 Extra-long Morse taper shank twist drills
59. ISO 3292 Extra-long parallel shank twist drills
60. ISO 3438 Subland twist drills with Morse taper shanks for holes prior to tapping screw threads
61. ISO 3439 Subland twist drills with cylindrical shanks for holes prior to tapping screw threads
62. ISO/DIS 3440 Twist drills with indexable inserts made of cemented carbide, with parallel shank, for metal and plastics (Translation from German)
63. ISO/DIS 3441 Twist drills with indexable inserts made of cemented carbide, with Morse taper shank, for metal and plastics (Translation from German)
64. ISO 235/11 Parallel shank jobber and stub series drills and Morse taper shank drills
65. ISO 3293 Morse taper countersinks for angles 60, 90 and 120 degrees inclusive
66. ISO 3294 Parallel shank countersinks for angles 60, 90 and 120 degrees inclusive
67. ISO 3314 Shell drills with taper bore (taper bore 1:30 (included)) with slot drive
68. ISO 4204 Countersinks °, with Morse taper shanks and detachable pilots
69. ISO 4205 Countersinks °, with parallel shanks and solid pilots
70. ISO 4206 Counterbores with parallel shanks and solid pilots
71. ISO 4207 Counterbores with Morse taper shanks and detachable pilots
72. ISO 236/I Hand reamers
73. ISO 236/II Machine reamers with Morse taper shank and long cutting blades (Translation from German)
74. ISO 521 Machine chucking reamers with parallel shanks or Morse taper shanks
75. ISO 522 Special tolerances for reamers
76. ISO 2238 Machine bridge reamers
77. ISO 2250 Finishing reamers for Morse and metric tapers, with parallel shanks and Morse taper shanks
78. ISO 2402 Shell reamers with taper bore (taper bore 1:30 (included)) with slot drive and arbors for shell reamers
79. ISO 3465 Hand taper pin reamers
80. ISO 3466 Machine taper pin reamers with parallel shanks
81. ISO 3467 Machine taper pin reamers with Morse taper shanks
82. ISO 529 Short machine taps and hand taps
83. ISO 2283 Long shank taps with nominal diameters from M3 to M24 and 1/8 in to 1 - reduced shank taps
84. ISO 2284 Hand taps for parallel and taper pipe threads - General dimensions and marking
85. ISO 2306 Drills for use prior to tapping screw threads
86. ISO 2568 Hand- and machine operated circular screwing dies and hand-operated die stocks
87. ISO 241 Shanks for turning and planing tools - Shapes and dimensions of the section
88. ISO 242 Carbide tips for brazing on turning tools
89. ISO 243 Turning tools with carbide tips; External tools
90. ISO 504 Turning tools with carbide tips; Designation and marking
91. ISO 514 Turning tools with carbide tips; Internal tools
92. ISO 883 Indexable hardmetal (carbide) inserts with rounded corners, without fixing hole; Dimensions
93. ISO 1832 Indexable inserts for cutting tools - Designation
94. ISO 3286 Single point cutting tools; corner radii
95. ISO 3364 Indexable hardmetal (carbide) inserts with rounded corners, with cylindrical fixing hole - Dimensions
96. ISO 3685 Tool-life testing with single-point turning tools
97. ISO/DIS 5421 Ground high speed tool bits
98. ISO 523 Milling cutters; Recommended range of outside diameters
99. ISO 883 Indexable hardmetal (carbide) inserts with rounded corners, without fixing hole; Dimensions
100. ISO/DIS 1641/I End mills and slot drills - Part I: Milling cutters with cylindrical shanks (Revision of ISO/R 1641-1970, Section 3)
101. ISO/DIS 1641/II End mills and slot drills - Part II: Milling cutters with Morse taper shanks (Revision of ISO/R 1641-1970, Section 4)
102. ISO/DIS 1641/III End mills and slot drills - Part III: Milling cutters with 7/24 taper shanks (Revision of ISO 2324-1972)
103. ISO 2584 Cylindrical cutters with plain bore and key drive - Metric series
104. ISO 2585 Slotting cutters with plain bore and key drive - Metric series
105. ISO 2586 Shell end mills with plain bore and tenon drive - Metric series
106. ISO 2587 Side and face milling cutters with plain bore and key drive - Metric series
107. ISO 2780 Milling cutters with tenon drive - Interchangeability dimensions for cutter arbors - Metric series
108. ISO 2940/I Milling cutters mounted on centring arbors having a 7/24 taper; Fitting dimensions; Centring arbors
109. ISO 2940/I Milling cutters mounted on centring arbors having a 7/24 taper; Inserted tooth cutters
110. ISO 3337 T-slot cutters with cylindrical shanks and Morse taper shanks having tapped hole
111. ISO 3338/I Cylindrical shanks for milling cutters - Part 1: Dimensional characteristics of plain cylindrical shanks
112. ISO 3338/II Cylindrical shanks for milling cutters - Part 2: Dimensional characteristics of flatted cylindrical shanks
113. ISO/DIS 3365/1.2 Indexable hardmetal (carbide) inserts with wiper edges, without fixing hole - Dimensions
114. SO/DIS 3855 Milling cutters - Nomenclature
115. ISO 3859 Inverse dovetail cutters and dovetail cutters with cylindrical shank
116. ISO 3860 Bore cutters with key drive - Form milling cutters with constant profile
117. ISO 3940 Tapered die-sinking cutters with parallel shanks
118. ISO 2296 Metal slitting saws with fine and coarse teeth - Metric series
119. ISO 2336 Hacksaw blades - Part 1 and 2; Dimensions for hand- and machineblades
120. ISO 2924 Solid and segmental circular saws for cold cutting of metals - Interchangeability dimensions of the drive - Saw diameter range 224 to 2240 mm
121. ISO/DIS 4875/I Metal-cutting band saw blades, Part 1: Vocabulary
122. ISO/DIS 4875/II Metal-cutting band saw blades - Part 2: Characteristics and dimensions
123. ISO/DIS 4875/III Metal-cutting band saw blades - Part 3: Characteristics of saw blade types
124. ISO 525 Bonded abrasive products - General requirements
125. ISO/R 603 Bonded abrasive products; Grinding wheel dimensions, Part 1
126. ISO 666 Machine tools - Mounting of grinding wheels by means of hub flanges
127. ISO 1117 Bonded abrasive products; Grinding wheel dimensions, Part 2
128. ISO 2220 Hand finishing sticks and oil stones; Dimensions
129. ISO 2933 Bonded abrasive products; Grinding wheel dimensions, Part 3
130. ISO 3920 Honing stones of square section; Designation and dimensions
131. ISO 3921 Honing stones of rectangular section; Designation and dimensions
132. ISO 1929 Abrasive belts; Designation, dimensions and tolerances
133. ISO 2235 Abrasive sheets - Dimensions, tolerances and designation
134. ISO 2421 Coated abrasives - Cylindrical sleeves
135. ISO 2422 Truncated cone abrasive sleeves; Dimensions and designation
136. ISO 2976 Coated abrasives - Abrasive belts - Selection of width/length combinations
137. 01. 76 Chip-forming machining of plastics/7 p.
138. 03. 94 Optimisation of cutting; basis/16 p.
139. 03. 77 Statistical testing of the operational and positional accuracy of machine tools; Basics 21 p.
140. 03. 77 Statistical examination of exactly working of turning machines/7 p.
141. 03. 77 Statistical examination of exactly working of milling machines/11 p.
142. 09. 78 Statistical control of exactly working and positioning of coordinate drilling machines and machining centers/18 p.
143. sheet 1 03. 77 Statistical examination of exactly working of grinding machines, Fundamentals.
144. sheet 2 03. 77 Statistical examination of exactly working of grinding machines; external cylindrical grinding machines with center points; plunge cut grinding operation/3 p.
145. sheet 3 03. 77 Statistical examination of exactly working of grinding machines; centerless external cylindrical grinding machines/4 p.
146. sheet 4 03. 77 Statistical examination of exactly working of grinding machines; internal grinding machines/4 p.
147. sheet 5 03. 77 Statistical examination of exactly working of grinding machines; Flat grinders/4 p.
148. 10. 94 Layout of turning processes/27 p.
149. E 08. 93 Guidelines for gun drilling/16 p.
150. sh. 1 02. 89 Deep hole boring; approximate values for deep hole boring with external supply of the coolant/12 p.
151. sh. 2 09. 92 Deep hole boring; approximate values for the skiving and roller burnishing of bores/7 p.
152. sheet 2 10. 86 Deep boring equipment; form for enquiry, quoting and ordering/6 p.
153. 09. 77 Hobbing of spur gears with involute profile/56 p.
154. 10. 91 Creep feed grinding/19 p.
155. 06. 80 Arrangement and use of diamond and CBN grinding devices for metal working/9 p.
156. Belt grinding for metal working
157. Maintenance of metalworking fluids for grinding (A 1/75)
158. 03. 86 Trueing and dressing of grinding wheels with conventional abrasives
159. 10. 91 Requirements on the surface structure to cover function capability of surfaces manufactured by cutting; list of parameters/14 p.
160. 09. 90 Methods of surface measurement; measurement of profile bearing length ratio/6 p.
161. 06. 71 Surface measuring methods; roughness analysis by means of interference microscopy
162. 06. 91 Inspection of hobs for involute gears (cylindrical gears)
163. E 06. 95 Computer-aided evaluation of profile and helix measurements on cylindrical gears with involute profile/25 p.
164. 02. 75 Tangential composite and radial composite inspection of cylindrical gears, bevel gears, worms and worm wheels/19 p.
165. sheet 1 11. 78 Profile and helix checking of involute cylindrical gears/12 p.
166. sheet 2 09. 80 Profile and helix checking of involute cylindrical gears/20 p.
167. sheet 2 E 07. 78 Tool numbering - tool systems; tools for master forming, material preparation; material-deforming process/40 p.
168. sh. 3 07. 76 Tool numbering - tool systems; tools for severing, combined severing and forming, removal options, cleaning/27 p.
169. sh. 6 07. 75 Tool numbering - tool systems; tools for joining (decomposing), coating, changing material properties/30 p.
170. sh. 7 03. 75 Tool numbering - tool systems; tools without allocation to procedures (predominantly hand tools outside the ranges 1-6)/23 p.
171. 04. 85 Multi-spindle automatic lathe; standards for machine equipment and operation/15 p.
172. 3323E 07. 94 Information on applicability of hard cutting materials for machining by chip removal/8 p.