Prediction of extrusion load and liquid phase filtration during ram extrusion of high solid volume fraction pastes

Powder Technology

Volumn 249, Issue , 2013, Pages 258-268

  Khelifi, H ^a   Perrot, A ^a   Lecompte, T ^a   Rangeard, D ^b   Ausias, G ^a  

^a UNIVERSITÉ DE BRETAGNE SUD   (France)

^b INSA DE RENNES   (France)

Author keywords

Consolidation; Extrusion; Multiphase flow; Pasty materials; Yield stress

Indexed keywords

CEMENT BASED MATERIAL; CONSOLIDATION THEORY; FILTRATION CHARACTERISTICS; FILTRATION VELOCITY; FRICTIONAL PLASTIC MATERIAL; ONE-DIMENSIONAL MODEL; PASTY MATERIALS; RHEOLOGICAL PARAMETER;

CLAY; CONSOLIDATION; FILTRATION; FORECASTING; INDUSTRY; LIQUIDS; MULTIPHASE FLOW; YIELD STRESS;

EXTRUSION;

CEMENT; KAOLIN; PLASTIC;

ARTICLE; CLAY; CONCEPTUAL FRAMEWORK; FILM; FILTRATION; LIQUID LIQUID EXTRACTION; LIQUID PHASE MICROEXTRACTION; PASTE; PREDICTION; PRESSURE GRADIENT; QUANTITATIVE ANALYSIS; VELOCITY;

EID: 84884371113     PISSN: 00325910     EISSN: 1873328X     Source Type: Journal    
DOI: 10.1016/j.powtec.2013.08.023     Document Type: Article

References (58)

1. Perrot A., Mélinge Y., Rangeard D., Micaelli F., Estellé P., Lanos C. Use of ram extruder as a combined rheo-tribometer to study the behaviour of high yield stress fluids at low strain rate. Rheol. Acta 2012, 51:743-754.
2. Basterfield R.A., Lawrence C.J., Adams M.J. On the interpretation of orifice extrusion data for viscoplastic materials. Chem. Eng. Sci. 2005, 60:2599-2607.
3. Benbow J.J., Bridgwater J. Paste Flow and Extrusion, Oxford 1993.
4. Benbow J.J., Jazayeri S.H., Bridgwater J. The flow of pastes through dies of complicated geometry. Powder Technol. 1991, 65:393-401.
5. Hill R. Mathematical Theory of Plasticity, Oxford 1950.
6. Aldea C., Marikunte S., Shah S.P. Extruded fiber reinforced cement pressure pipe. Adv. Cem. Based Mater. 1998, 8:47-55.
7. Qian X., Zhou X., Mu B., Li Z. Fiber alignment and property direction dependency of FRC extrudate. Cem. Concr. Res. 2003, 33:1575-1581.
8. Mu B., Li Z., Chui S.N.C., Peng J. Cementitious composite manufactured by extrusion technique. Cem. Concr. Res. 1999, 29:237-240.
9. Perrot A., Mélinge Y., Estellé P., Lanos C. Vibro-extrusion: a new forming process for cement-based materials. Adv. Cem. Res. 2009, 21:125-133.
10. Patel M.J., Blackburn S., Wilson D.I. Modelling of paste flows subject to liquid phase migration. Int. J. Numer. Methods Eng. 2007, 72:1157-1180.
11. Götz J., Kreibich W., Peciar M. Extrusion of pastes with a piston extruder for the determination of the local solid and fluid concentration, the local porosity and saturation and displacement profiles by means of NMR imaging. Rheol. Acta 2002, 41:134-143.
12. Götz J., Zick K., Kreibich W. Possible optimisation of pastes and the according apparatus in process engineering by MRI flow experiments. Chem. Eng. Process. 2003, 42:517-534.
13. Perrot A., Lanos C., Melinge Y., Estellé P. Mortar physical properties evolution in extrusion flow. Rheol. Acta 2007, 46:1065-1073.
14. Yu A.B., Bridgwater J., Burbidge A.S., Saracevic Z. Liquid maldistribution in particulate paste extrusion. Powder Technol. 1999, 103:103-109.
15. Rabideau B.D., Moucheront P., Bertrand F., Rodts S., Mélinge Y., Lanos C., Coussot P. Internal flow characteristics of a plastic kaolin suspension during extrusion. J. Am. Ceram. Soc. 2012, 95:494-501.
16. Rough S.L., Wilson D.I., Bridgwater J. A model describing liquid phase migration within an extruding microcrystalline cellulose paste. Chem. Eng. Res. Des. 2002, 80:701-714.
17. 2 ceramic powder paste. J. Mater. Process. Technol. 1997, 72:243-248.
18. Yaras P., Kalyon D.M., Yilmazer U. Flow instabilities in capillary flow of concentrated suspensions. Rheol. Acta 1994, 33:48-59.
19. Toutou Z., Roussel N., Lanos C. The squeezing test: a tool to identify firm cement-based material's rheological behaviour and evaluate their extrusion ability. Cem. Concr. Res. 2005, 35:1891-1899.
20. Martin P.J., Wilson D.I., Bonnett P.E. Paste extrusion through non-axisymmetric geometries: insights gained by application of a liquid phase drainage criterion. Powder Technol. 2006, 168:64-73.
21. Mascia S., Patel M.J., Rough S.L., Martin P.J., Wilson D.I. Liquid phase migration in the extrusion and squeezing of microcrystalline cellulose pastes. Eur. J. Pharm. Sci. 2006, 29:22-34.
22. Perrot A., Rangeard D., Melinge Y., Estellé P., Lanos C. Extrusion criterion for firm cement-based materials. Appl. Rheol. 2009, 19:53042.
23. Patel M.J., Wedderburn J., Blackburn S., Wilson D.I. Maldistribution of fluids in extrudates. J. Eur. Ceram. Soc. 2009, 29:937-941.
24. Burbidge A.S., Bridgwater J., Saracevic Z. Liquid migration in paste extrusion. Trans. IchemE 1995, 73:810-816.
25. Bardesley M.A., Bridgwater J. Evaluation of liquid phase migration in pastes and gels. Ind. Eng. Chem. Res. 2012, 51:1774-1781.
26. Roussel N., Lanos C., Mélinge Y. Induced heterogeneity in saturated flowing granular media. Powder Technol. 2003, 138:68-72.
27. Kaci A., Ouari N., Racineux G., Chaouche M. Flow and blockage of highly concentrated granular suspensions in non-Newtonian fluid. Eur. J. Mech. B. Fluids 2011, 30:129-134.
28. Yammine J., Chaouche M., Guerinet M., Moranville M., Roussel N. From ordinary rhelogy concrete to self compacting concrete: a transition between frictional and hydrodynamic interactions. Cem. Concr. Res. 2008, 38:890-896.
29. Lecompte T., Perrot A., Picandet V., Bellegou H., Amziane S. Cement-based mixes: shearing properties and pore pressure. Cem. Concr. Res. 2012, 42:139-147.
30. Roussel N., Lemaître A., Flatt R.J., Coussot P. Steady state flow of cement suspensions: a micromechanical state of the art. Cem. Concr. Res. 2010, 40:77-84.
31. Coussot P., Ancey C. Rheophysical classification of concentrated suspensions and granular pastes. Phys. Rev. E 1999, 59:4445-4457.
32. Perrot A., Lanos C., Estellé P., Melinge Y. Ram extrusion force for a frictional plastic material: model prediction and application to cement paste. Rheol. Acta 2006, 45:457-467.
33. Mahaut F., Mokeddem S., Chateau X., Roussel N., Ovarlez G. Effect of coarse particle volume fraction on the yield stress and thixotropy of cementitious materials. Cem. Concr. Res. 2008, 38:1276-1285.
34. Terzaghi K. Theoretical Soil Mechanics, New York 1943.
35. Donev A., Stillinger F.H., Chaikin P.M., Torquato S. Unusually dense crystal packings of ellipsoids. Phys. Rev. Lett. 2004, 92:1-4.
36. Rangeard D., Perrot A., Mélinge Y., Hoang V.H., N.P.H. Consolidation characteristics evolution of clay under solicitation. 6th World Congress on Particle Technology, Nuremberg 2010, 480. Partec (Ed.).
37. Wahyudi I., Montillet A.s., Khalifa A.A. Darcy and post-Darcy flows within different sands. J. Hydraul. Res. 2002, 40:519-525.
38. Carman P.C. Permeability of saturated sands, soils and clays. J. Agric. Sci. 1939, 29:263-273.
39. Taylor D.W. Fundamentals of Soil Mechanics, New York 1948.
40. Picandet V., Rangeard D., Perrot A., Lecompte T. Permeability measurement of fresh cement paste. Cem. Concr. Res. 2011, 41:330-338.
41. Flatt R.J., Bowen P. Yield stress of multimodal powder suspensions: an extension of the YODEL (Yield Stress mODEL). J. Am. Ceram. Soc. 2007, 90:1038-1944.
42. Perrot A., Lecompte T., Estellé P., Amziane S. Structural build-up of rigid fiber reinforced cement-based materials. Mater. Struct. 2013, 1-8.
43. Perrot A., Melinge Y., Rangeard D., Estellé P., Lanos C. The back extrusion test as a technique for determining the rheological and tribological behaviour of yield stress fluids. Appl. Rheol. 2011, 21:53642.
44. Roussel N., Lanos C. Plastic fluid flow parameters identification using a simple squeezing test. Appl. Rheol. 2003, 13:132.
45. Sherwood J.D., Durban D. Squeeze flow of a power-law viscoplastic solid. J. Non-Newtonian Fluid Mech. 1996, 62:35-54.
46. Sherwood J.D., Durban D. Squeeze-flow of a Herschel-Bulkley fluid. J. Non-Newtonian Fluid Mech. 1998, 77:115-121.
47. Engmann J., Servais C., Burbidge A.S. Squeeze flow theory and applications to rheometry: a review. J. Non-Newtonian Fluid Mech. 2005, 132:1-27.
48. Mélinge Y., Hoang V.H., Rangeard D., Perrot A., Lanos C. Study of tribological behaviour of fresh mortar against a rigid plane wall. Eur. J. Environ. Eng. Civ. Eng. 2013, 17(6):419-429.
49. Horrobin D.J. Theoretical aspects of Paste Extrusion. Department of Chemical Engineering 1999, 259. University of Cambridge, Cambridge.
50. Horrobin D.J., Nedderman R.M. Die entry pressure drops in paste extrusion. Chem. Eng. Sci. 1998, 53:3215-3225.
51. Jay P., Magnin A., Piau J.M. Numerical simulation of viscoplastic fluid flows through an axisymmetric contraction. J. Fluid. Eng. 2002, 124:700-705.
52. Zienkiewicz O.C., Jain P.C., Onate E. Flow of solids during forming and extrusion: some aspects of numerical solutions. Int. J. Solids Struct. 1977, 14:15-38.
53. Janssen H.A. Versuche über Getreidedruck in Silozellen. Z. Ver. Dtsch. Ing. 1895, 39:1045-1049.
54. Ovarlez G., Roussel N. A physical model for the prediction of lateral stress exerted by self-compacting concrete on formwork. Mater. Struct. 2006, 32:269-279.
55. Perrot A., Amziane S., Ovarlez G., Roussel N. SCC formwork pressure: influence of steel rebars. Cem. Concr. Res. 2009, 39:524-528.
56. Jacky J. The coefficient of earth pressure at rest. J. Soc. Hung. Archit. Eng. 1944, 355-358.
57. Deng Q., Liu H. Analysis of coal log ram extrusion. Powder Technol. 1997, 91:31-41.
58. Liu H., Liu J., Leu M., Landers R., Huang T. Factors influencing paste extrusion pressure and liquid content of extrudate in freeze-form extrusion fabrication. Int. J. Adv. Manuf. Technol. 2013, 1-8. (published online).