Monomer-to-polymer conversion and micro-tensile bond strength to dentine of experimental and commercial adhesives containing diphenyl(2,4,6- trimethylbenzoyl)phosphine oxide or a camphorquinone/amine photo-initiator system

Journal of Dentistry

Volumn 41, Issue 10, 2013, Pages 918-926

  Miletic, Vesna ^a,b   Pongprueksa, Pong ^a   De Munck, Jan ^a   Brooks, Neil R ^a   Van Meerbeek, Bart ^a,c  

^a UNIVERSITY OF LEUVEN   (Belgium)

^b UNIVERSITY OF BELGRADE   (Serbia)

^c UNIVERSITY HOSPITALS LEUVEN   (Belgium)

Author keywords

Adhesive; Bond strength; Degree of conversion; Dentine; FTIR; TPO

Indexed keywords

(2,4,6-TRIMETHYLBENZOYL) DIPHENYLPHOSPHINE OXIDE; 2 HYDROXYETHYL METHACRYLATE; 4 AMINOBENZOIC ACID DERIVATIVE; BISPHENOL A BIS(2 HYDROXYPROPYL) ETHER DIMETHACRYLATE; CAMPHOR; CAMPHORQUINONE; DENTIN BONDING AGENT; ETHYL 4-N,N-DIMETHYLAMINOBENZOATE; G-BOND; MACROGOL DERIVATIVE; MDP ADHESION PROMOTING MONOMER; METHACRYLIC ACID DERIVATIVE; ORGANOPHOSPHORUS COMPOUND; PHOSPHINE DERIVATIVE; PHOTOINITIATOR; POLYMETHACRYLIC ACID DERIVATIVE; RESIN CEMENT; SCOTCHBOND; TRIETHYLENE GLYCOL DIMETHACRYLATE; WATER;

ADULT; ANALOGS AND DERIVATIVES; CHEMISTRY; CLASSIFICATION; COMPARATIVE STUDY; DENTAL ACID ETCHING; DENTAL BONDING; DENTAL CURING LIGHT; DENTIN; DEVICES; HUMAN; INFRARED SPECTROSCOPY; MATERIALS TESTING; MECHANICAL STRESS; POLYMERIZATION; PROCEDURES; TENSILE STRENGTH; TIME; ULTRASTRUCTURE; YOUNG ADULT;

ACID ETCHING, DENTAL; ADULT; BISPHENOL A-GLYCIDYL METHACRYLATE; CAMPHOR; CURING LIGHTS, DENTAL; DENTAL BONDING; DENTIN; DENTIN-BONDING AGENTS; HUMANS; LIGHT-CURING OF DENTAL ADHESIVES; MATERIALS TESTING; METHACRYLATES; ORGANOPHOSPHORUS COMPOUNDS; PARA-AMINOBENZOATES; PHOSPHINES; PHOTOINITIATORS, DENTAL; POLYETHYLENE GLYCOLS; POLYMERIZATION; POLYMETHACRYLIC ACIDS; RESIN CEMENTS; SPECTROSCOPY, FOURIER TRANSFORM INFRARED; STRESS, MECHANICAL; TENSILE STRENGTH; TIME FACTORS; WATER; YOUNG ADULT;

EID: 84884208695     PISSN: 03005712     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.jdent.2013.07.007     Document Type: Article

References (30)

1. K. Ikemura, and T. Endo A review of the development of radical photopolymerization initiators used for designing light-curing dental adhesives and resin composites Dental Materials Journal 29 2010 481 501
2. W.F. Schroeder, and C.I. Vallo Effect of different photoinitiator systems on conversion profiles of a model unfilled light-cured resin Dental Materials 23 2007 1313 1321
3. V.B. Michelsen, H. Lygre, R. Skalevik, A.B. Tveit, and E. Solheim Identification of organic eluates from four polymer-based dental filling materials European Journal of Oral Sciences 111 2003 263 271
4. W.M. Palin, D.P. Senyilmaz, P.M. Marquis, and A.C. Shortall Cure width potential for MOD resin composite molar restorations Dental Materials 24 2008 1083 1094
5. A. Santini, V. Miletic, M.D. Swift, and M. Bradley Degree of conversion and microhardness of TPO-containing resin-based composites cured by polywave and monowave LED units Journal of Dentistry 40 2012 577 584
6. H. Arikawa, H. Takahashi, T. Kanie, and S. Ban Effect of various visible light photoinitiators on the polymerization and color of light-activated resins Dental Materials Journal 28 2009 454 460
7. J.G. Leprince, M. Hadis, A.C. Shortall, J.L. Ferracane, J. Devaux, and G. Leloup Photoinitiator type and applicability of exposure reciprocity law in filled and unfilled photoactive resins Dental Materials 27 2011 157 164
8. L.F. Schneider, L.M. Cavalcante, S.A. Prahl, C.S. Pfeifer, and J.L. Ferracane Curing efficiency of dental resin composites formulated with camphorquinone or trimethylbenzoyl-diphenyl-phosphine oxide Dental Materials 28 2012 392 397
9. M.G. Neumann, W.G. Miranda Jr., C.C. Schmitt, F.A. Rueggeberg, and I.C. Correa Molar extinction coefficients and the photon absorption efficiency of dental photoinitiators and light curing units Journal of Dentistry 33 2005 525 532
10. M. Cadenaro, F. Antoniolli, B. Codan, K. Agee, F.R. Tay, and S. Dorigo Ede Influence of different initiators on the degree of conversion of experimental adhesive blends in relation to their hydrophilicity and solvent content Dental Materials 26 2010 288 294
11. N. Ilie, and R. Hickel Can CQ be completely replaced by alternative initiators in dental adhesives? Dental Materials Journal 27 2008 221 228
12. A. Santini Current status of visible light activation units and the curing of light-activated resin-based composite materials Dentistry Update 37 2010 214 216 18-20, 23-27
13. V. Miletic, and A. Santini Micro-Raman spectroscopic analysis of the degree of conversion of composite resins containing different initiators cured by polywave or monowave LED units Journal of Dentistry 40 2012 106 113
14. A. Poitevin, J. De Munck, K. Van Landuyt, E. Coutinho, M. Peumans, and P. Lambrechts Influence of three specimen fixation modes on the micro-tensile bond strength of adhesives to dentin Dental Materials Journal 26 2007 694 699
15. J. De Munck, A. Mine, M. Vivan Cardoso, A. De Almeida Neves, K.L. Van Landuyt, and A. Poitevin Effect of dentin location and long-term water storage on bonding effectiveness of dentin adhesives Dental Materials Journal 30 2011 7 13
16. D. Truffier-Boutry, S. Demoustier-Champagne, J. Devaux, J.J. Biebuyck, M. Mestdagh, and P. Larbanois A physico-chemical explanation of the post-polymerization shrinkage in dental resins Dental Materials 22 2006 405 412
17. W.M. Palin, G.J. Fleming, F.J. Burke, P.M. Marquis, and R.C. Randall Monomer conversion versus flexure strength of a novel dental composite Journal of Dentistry 31 2003 341 351
18. D. Manojlovic, M. Radisic, M. Lausevic, S. Zivkovic, and V. Miletic Mathematical modeling of cross-linking monomer elution from resin-based dental composites Journal of Biomedical Materials Research Part B: Applied Biomaterials 101 2013 61 67
19. K. Koshiro, S.K. Sidhu, S. Inoue, T. Ikeda, and H. Sano New concept of resin-dentin interfacial adhesion: the nanointeraction zone Journal of Biomedical Materials Research Part B: Applied Biomaterials 77 2006 401 408
20. M. Sarr, A.W. Kane, J. Vreven, A. Mine, K.L. Van Landuyt, and M. Peumans Microtensile bond strength and interfacial characterization of 11 contemporary adhesives bonded to bur-cut dentin Operative Dentistry 35 2010 94 104
21. Y. Zhang, and Y. Wang Improved degree of conversion of model self-etching adhesives through their interaction with dentine Journal of Dentistry 40 2012 57 63
22. P. Spencer, and Y. Wang Adhesive phase separation at the dentin interface under wet bonding conditions Journal of Biomedical Materials Research 62 2002 447 456
23. S.H. Dickens, and B.H. Cho Interpretation of bond failure through conversion and residual solvent measurements and Weibull analyses of flexural and microtensile bond strengths of bonding agents Dental Materials 21 2005 354 364
24. M. Giannini, C.A. Arrais, P.M. Vermelho, R.S. Reis, L.P. dos Santos, and E.R. Leite Effects of the solvent evaporation technique on the degree of conversion of one-bottle adhesive systems Operative Dentistry 33 2008 149 154
25. J. De Munck, K. Van Landuyt, M. Peumans, A. Poitevin, P. Lambrechts, and M. Braem A critical review of the durability of adhesion to tooth tissue: methods and results Journal of Dental Research 84 2005 118 132
26. B. Baracco, M.V. Fuentes, M.A. Garrido, S. Gonzalez-Lopez, and L. Ceballos Effect of thermal aging on the tensile bond strength at reduced areas of seven current adhesives Odontology 2012 10.1007/s10266-012-0073-2
27. G. Leloup, W. D'Hoore, D. Bouter, M. Degrange, and J. Vreven Meta-analytical review of factors involved in dentin adherence Journal of Dental Research 80 2001 1605 1614
28. S. Scherrer, P.F. Cesar, and M.V. Swain Direct comparison of the bond strength results of the different test methods: a critical literature review Dental Materials 26 2010 e78 e93
29. M. Oguri, Y. Yoshida, K. Yoshihara, T. Miyauchi, Y. Nakamura, and S. Shimoda Effects of functional monomers and photo-initiators on the degree of conversion of a dental adhesive Acta Biomaterialia 8 2012 1928 1934
30. N. Moszner, U. Salz, and J. Zimmermann Chemical aspects of self-etching enamel-dentin adhesives: a systematic review Dental Materials 21 2005 895 910