Alkali activated materials based on fluid catalytic cracking catalyst residue (FCC): Influence of SiO2/Na2O and H 2O/FCC ratio on mechanical strength and microstructure

Fuel

Volumn 108, Issue , 2013, Pages 833-839

  Tashima, M M ^a   Akasaki, J L ^b   Melges, J L P ^b   Soriano, L ^a   Monzo J ^a   Paya J ^a   Borrachero, M V ^a  

^a UNIVERSITAT POLITÈCNICA DE VALÈNCIA   (Spain)

^b SÃO PAULO STATE UNIVERSITY UNESP   (Brazil)

Author keywords

Alkali activated material; Mechanical properties; Spent FCC; Waste

Indexed keywords

AGRICULTURAL WASTES; BINDERS; BINS; CARBON DIOXIDE; CATALYSTS; CATALYTIC CRACKING; CEMENT INDUSTRY; CEMENTS; COMPRESSIVE STRENGTH; CRACKS; MECHANICAL PROPERTIES; MICROSTRUCTURE; MORTAR; PETROLEUM INDUSTRY; PETROLEUM REFINERIES; PORTLAND CEMENT; SUSTAINABLE DEVELOPMENT; WASTES;

ALKALI ACTIVATED; ALKALI ACTIVATED CEMENTS; ALUMINOSILICATE MATERIALS; ELECTRICAL CONDUCTIVITY MEASUREMENTS; FLUID CATALYTIC CRACKING CATALYST; PROPERTIES AND MICROSTRUCTURES; SPENT FCC; SUPPLEMENTARY CEMENTITIOUS MATERIAL;

FLUID CATALYTIC CRACKING;

EID: 84883599854     PISSN: 00162361     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.fuel.2013.02.052     Document Type: Article

References (34)

1. Shi C, Fernández-Jiménez A, Palomo A. New cements for the 21st century: the pursuit of an alternative to Portland cement. Cem Concr Res 2011;41:750-63.
2. 2 performance - Getting numbers right; 2009.
3. Alcaide JS, Alcocel EG, Puertas F, Lapuente R, Garcés P. Carbon fibre-reinforced, alkali-activated slag mortars. Mater Construcc 2007;57:33-48.
4. Fernández-Jiménez A, Palomo A. Composition and microstructure of alkali activated fly ash binder: effect of the activator. Cem Concr Res 2005;35:1984-92. (Pubitemid 41375779)
5. Criado M, Fernández-Jiménez A, Palomo A. Alkali activation of fly ash. Part III: Effect of curing conditions on reaction and its graphical description. Fuel 2010;89:3185-92.
6. Rahier H, Mele B, Biesemans M, Wastiels J, Wu X. Low-temperature synthesized aluminosilicate glasses. J Mater Sci 1996;31:71-9.
7. Phair JW, van Deventer JSJ. Effect of the silicate activator pH on the microstructural characteristics of waste-based geopolymers. Int J Miner Process 2002;66:121-43.
8. Tashima MM, Soriano L, Borrachero MV, Monzó J, Payá J. Effect of curing time on the microstructure and mechanical strength development of alkali activated binders based on Vitreous Calcium Aluminosilicate (VCAS). Bull Mater Sci, in press. http://www.ias.ac.in/matersci/
9. Fernández-Jiménez A, Palomo JG, Puertas F. Alkali-activated slag mortars: mechanical strength behaviour. Cem Concr Res 1999;29:1313-21.
10. Shi C, Krivenko P, Roy D. Alkali-activated cements and concretes. 1st ed. New York: Taylor & Francis; 2006.
11. Bernal SA, Gutiérrez RM, Pedraza AL, Provis JL, Rodriguez ED, Delvasto S. Effect of binder content on the performance of alkali-activated slag concretes. Cem Concr Res 2011;41:1-8.
12. Fernández-Jiménez A, Palomo A, Criado M. Microstructure development of alkali-activated fly ash cement: a descriptive model. Cem Concr Res 2005;35:1204-9. (Pubitemid 40710246)
13. Bakharev T. Geopolymeric materials prepared using class F fly ash and elevated temperature curing. Cem Concr Res 2005;35:1224-32. (Pubitemid 40710249)
14. Buchwald A, Hilbig H, Kaps C. Alkali-activated metakaolin-slag blends - performance and structure in dependence of their composition. J Mater Sci 2007;42:3024-32. (Pubitemid 46738219)
15. Muñiz-Villareal MS, Reyes-Araiza JL, Sampieri-Bulbarela S, Gasca-Tirado JR, Manzano-Ramírez A, Rubio-Ávalos JC, et al. The effect of temperature on the geopolymerisation process of a metakaolin-based geopolymer. Mater Lett 2011;65:995-8.
16. Pacheco-Torgal F, Castro-Gomes J, Jalali S. Properties of tungsten mine waste geopolymeric binder. Constr Build Mater 2008;22:1201-11. (Pubitemid 351418108)
17. Tashima MM, Soriano L, Borrachero MV, Monzó J, Cheeseman CR, Payá J. Alkali activation of vitreous calcium aluminosilicate derived from glass fiber waste. J Sust Cem-Based Mater 2012;3:83-93.
18. Kourti I, Devaraj AR, Guerrero Bustos A, Deegan D, Boccaccini AR, Cheeseman CR. Geopolymers prepared from DC plasma treated air pollution control (APC) residues glass: properties and characterisation of binder phase. J Hazard Mater 2011;196:86-92.
19. Kourti I, Rani DA, Deegan D, Boccaccini AR, Cheeseman CR. Production of geopolymers using glass from DC plasma treatment of air pollution control (APC) residues. J Hazard Mater 2010;176:704-9.
20. Payá J, Borrachero MV, Monzó J, Soriano L, Tashima MM. A new geopolymeric binder from hydrated-carbonated cement. Mater Lett 2012;74:223-5.
21. Payá J, Borrachero MV, Monzó J, Soriano L. Estudio del comportamiento de diversos residuos de catalizadores de craqueo catalítico (FCC) en cement Portland. Mater Constr 2009;59:37-52.
22. Payá J, Monzó J, Borrachero MV, Velázquez S. Evaluation of the pozzolanic activity of fluid catalytic cracking catalyst residue (FC3R). Thermogramivetric analysis studies on FC3R-Portland cement pastes. Cem Concr Res 2003;33:603-9.
23. Payá J, Borrachero MV. Physical, chemical and mechanical properties of fluid catalytic cracking catalyst residue (FC3R) blended cements. Cem Concr Res 2001;31:57-61.
24. Zornoza E, Garcés P, Monzó J, Borrachero MV, Payá J. Accelerated carbonation of cement pastes partially substituted with fluid catalytic cracking catalyst residue (FC3R). Cem Concr Comput 2009;31:134-8.
25. Zornoza E, Payá J, Garcés P. Chloride-induced corrosion of steel embedded in mortars containing fly ash and spent cracking catalyst. Corros Sci 2008;50:1567-75.
26. Tashima MM, Akasaki JL, Castaldelli VN, Soriano L, Monzó J, Payá J, et al. New geopolymeric binder based on fluid catalytic cracking catalyst residue (FCC). Mater Lett 2012;80:50-2.
27. Payá J, Monzó J, Borrachero MV. Fluid catalytic cracking catalyst residue (FC3R): an excellent mineral by-product for improving early-strength development of cement mixtures. Cem Concr Res 1999;29:1773-9. (Pubitemid 30531589)
28. Chindaprasirt P, Jaturapitakkul C, Chalee W, Rattanasak U. Comparative study on the characteristics of fly ash and bottom ash geopolymers. Waste Manage 2009;29:539-43.
29. Somna K, Jaturapitakkul C, Kajitvichyanukul P, Chindaprasirt P. NaOH-activated ground fly ash geopolymer cured at ambient temperature. Fuel 2011;90:2118-24.
30. Zuhua Z, Xiao Y, Huajun Z, Yue C. Role of water in the synthesis of calcined kaolin based geopolymer. Appl Clay Sci 2009;43:218-23.
31. Lee WKW, van Deventer JSJ. Structural reorganization of class F fly ash in alkaline silicate solutions. Colloids Surf A 2002;211:49-66. (Pubitemid 35300221)
32. Lampris C, Lupo R, Cheeseman CR. Geopolymerisation of silt generated from construction and demolition waste washing plants. Waste Manage 2009;29:368-73.
33. Wu HC, Sun P. New building materials from fly ash-based lightweight inorganic polymer. Constr Build Mater 2007;21:211-7. (Pubitemid 44192605)
34. Provis JL, Duxson P, Lukey GC, van Deventer JSJ. Statistical thermodynamic model for Si/Al ordering in amorphous aluminosilicates. Chem Mater 2005;17:2976-86. (Pubitemid 40850256)