Reuse and Recycling Technologies

Environmentally Conscious Mechanical Design

Volumn , Issue , 2007, Pages 249-282

  Kaebernick, Hartmut ^a   Kara, Sami ^a  

^a UNIVERSITY OF NEW SOUTH WALES   (Australia)

Author keywords

Condition base maintenance (CBM); Design for disassembly (DfD); Froth flotation systems; Life Cycle Assessment (LCA); Reuse and recycling technologies

Indexed keywords

EID: 84883194919     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1002/9780470168202.ch7     Document Type: Chapter

References (43)

1. B. A. Hegberg, G. A. Brenniman, and W. H. Hallenbeck, Mixed Plastic Recycling Technology, Noyes Data Corp, Park Ridge, NJ, 1992.
2. T. J. Veasy, R. J. Wilson, and D. M. Squires, The Physical Separation and Recovery of Metals from Wastes, Gordon & Breach Science Publishers, Amsterdam, 1993.
3. H. Yamamoto and S. Shibata, "Inverse Factory for End-of-Life Cars-complete Dismantling System," 1st International Symposium on Environmentally Conscious Design and Inverse Manufacturing, EcoDesign99, 1999.
4. M. Santochi, G. Dini, and F. Failli, "Computer-aided Disassembly Planning: State-ofthe-art," Annals of the CIRP, 51 (2), 1-23 (2002).
5. S. Kara, P. Pornprasitpol, and H. Kaebernick, "A Selective Disassembly Methodology for End-of-Life Products," Assembly Automation, 25 (2), 124-134 (2005).
6. B. Willems, W. Dewulf, and J. Duflou, "End-of-Life Strategy Selection: A Linear Programming Approach to Manage Innovations in Product Design," Proceedings of the 11th International CIRP Life Cycle Engineering Seminar, Belgrade, 2004.
7. J. D. Chiodo, N. Jones, E. Billet, and D. J. Harrison, "Shape Memory Alloy Actuators for Active Disassembly Using 'Smart' Materials of Consumer Electronic Products," Materials and Design, (23), 471-478, (2002).
8. T. Suga and H. Hosada, "Active Disassembly and Reversible Interconnection," Proceedings of the IEEE International Symposium on Electronics and the Environment, pp. 330-334, 2000.
9. rd International Symposium on Environmentally Conscious Design and Inverse Manufacturing, Tokyo, Japan, pp. 504-509, December 2003.
10. N. Jones, D. Harrison, H. Hussein, E. Billett, and J. Chiodo, "Electrically Selfpowered Active Disassembly," Journal of Engineering Manufacture, 218 (7), 689-697, (2004).
11. Shred-Tech (www.shred-tech.com).
12. SSI Shredding Systems, Inc. (www.ssiworld.com).
13. Zerma Machinery and Recycling Technologies, (www.zerma.com).
14. Jaykrishna Magnetics (www.jkmagnetics.com).
15. Eriez, Magnetic Drum Separator (www.eriez.com).
16. Global Magnetics, (www.globalmagnetics.com).
17. Argonne National Laboratory, (http://www.es.anl.gov/Energy Systems).
18. S. Kara, I. M. Mazhar, and H. Kaebernick, "Lifetime Prediction of Components for Reuse: An Overview," International Journal of Environment and Technology, 4 (4), (2004).
19. H. Kaebernick, S. Kara, and M. Sun, "Sustainable Product Development and Manufacturing by Considering Environmental Requirements," Robotics and Computer-Integrated Manufacturing Journal, 19 (6), (December 2003).
20. H. Kaebernick, M. Anityasari, and S. Kara, "A Technical and Economic Model for Endof-Life (EOL) Options of Industrial Products," International Journal of Environment and Sustainable Development, 1 (2), 171-183, (2002).
21. N. Jackobsson, "Product Service Systems: Panacea or Myth?" Ph.D. dissertation, Lund University, Sweden, 2004.
22. R. Steinhilper, Remanufacturing: The Ultimate Form of Recycling, Fraunhofer IRB Verlag, 1998.
23. E. Sundin, "Product Properties Essential for Remanufacturing," 8th CIRP International Seminar on Life Cycle Engineering, Varna, Bulgaria, June 2001.
24. S. Kara, M. I. Mazhar, H. Kaebernick, and H. Ahmed, "Determining the Reuse Potential of Components Based on Life Cycle Data," Annals of the CIRP, 54 (1) (2005).
25. S. Takata, F. Kimura, F. J. A. M. van Houten, and E. Wetkamper, "Maintanence: Changing Role in Life Cycle Management," Annals of the CIRP, 53 (2), 1-13, (2004).
26. I. M. Mazhar, S. Kara, and H. Kaebernick, "Reuse Potential of Used Parts in Consumer Products: Assessment with Weibull Analysis," Proceedings of the CIRP Seminar on Life Cycle Engineering, June 21-22, Belgrade, Serbia & Montenegro, 2004.
27. K. Fitzgibbon, R. Barker, T. Clayton, and N. Wilson, "A Failure-Forecast Method Based on Weibull and Statistical-pattern Analysis," Reliability and Maintainability Symposium IEEE, pp. 516-521, 2002.
28. Y. Li, T. R. Kurfess, and S. Y. Liang, "Improved Effectiveness of Vibration Monitoring of Rolling Bearings in Paper Mills," Proceedings of the IMechE Part J, Journal of Engineering Tribology (Professional Engineering Publishing) 212 (2), 111-120, (1998).
29. Al-Najjar, "Accuracy, Effectiveness and Improvement of Vibration-based Maintenance in Paper Mills: Case Studies," Journal of Sound and Vibration, 229 (2), 389-410, (2000)
30. H. Y. Liou, and C. S. Shin Wu, "A Modified Model for the Estimation of Fatigue Life Derived from Random Vibration Theory," Probabilistic Engineering Mechanics, 14 (3), 281-288, (1999).
31. Q. Jing, B. S. Brij, S. Y. Liang, and C. Zhang, "Damage Mechanics Approach for Bearing Lifetime Prognostics," Mechanical Systems and Signal Processing, 16 (5), 819-829, (2002).
32. A. Ray, and S. Tangirala, "Stochastic Modeling of Fatigue Crack Propagation," American Control Conference, IEEE, vol. 1, pp. 425-429, 1997.
33. A. Ray, and S. Tangirala, A Nonlinear Stochastic Model of Fatigue Crack Dynamics," Probabilistic Engineering Mechanics, 12 (1), 33-40, (1997).
34. A. K. Sheikh, M. Ahmed, and M. A. Badar, "Fatigue Life Prediction of Assemblies of Rotating Parts," International Journal of Fatigue, 17 (1), 35-41, (1995).
35. M. Haiba, D.C. Barton, P. C. Brooks, and M. C. Levesley, "Review of Life Assessment Techniques Applied to Dynamically Loaded Automotive Components," Computers & Structures, 80 (5-6), 481-494, (2002).
36. G. Petrucci, and B. Zuccarello, "On the Estimation of the Fatigue Cycle Distribution from Spectral Density Data," Proceedings of the IMechE Part C, Journal of Mechanical Engineering Science (Professional Engineering Publishing), 213 (8), 819-831, (1999).
37. N. Arora, and D. Kumar, "Availability Analysis of Steam and Power Generation Systems in the Thermal Power Plant," Microelectronics and Reliability, 37 (5), 795-799, (1997).
38. C. McLean, Wireless data gathering system for condition based maintenance, www.techkor.com/techset.htm.
39. J. Ni, J. Lee, and D. Djurdjanovic, "Watchdog-Information Technology for Proactive Product Maintenance and Ecological Product Reuse," Proceedings on Colloquium on E-Ecological Manufacturing, Technical University of Berlin, Germany, March 2003.
40. G. Seliger, A. Buchholz, and U. Kross, "Enhanced Product Functionality with Life Cycle Units," Proceedings of the Institutions of Mechanical Engineers, Part B, Journal of Engineering Manufacture, 217, (B9), 1197-1202, (2003).
41. G. Seliger, U. Kross, and A. Buchholz, "Efficient Maintenance Approach by On-board Monitoring of Innovative Wagon Bogie," Proceedings of the IEEE ASME International Conference on Advanced Intelligent Mechatronics, Kobe, Japan, pp. 407-411, 2003.
42. I. M. Mazhar, S. Kara, and H. Kaebernick, "Reliability Assessment for Reuse of Components in Consumer Products-A Statistical and Condition Monitoring Data Analysis Strategy," Proceedings of the 4th Australian Life Cycle Assessment Conference, Sydney, Australia, February 23-25, 2005.
43. G. Seliger, "Global Sustainability-A Future Scenario," Proceedings of the Global Conference on Sustainable Product Development and Life Cycle Engineering, Berlin, Germany, September, 2004