Degradable Polymers for Tissue Engineering

Tissue Engineering

Volumn , Issue , 2008, Pages 193-221

  Van Dijkhuizen Radersma, Riemke ^a   Moroni, Lorenzo ^b   Apeldoorn, Aart van ^a   Zhang, Zheng ^a   Grijpma, Dirk ^a  

^a Progentix BV   (Netherlands)

^b UNIVERSITY OF TWENTE   (Netherlands)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 84882907203     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1016/B978-0-12-370869-4.00007-0     Document Type: Chapter

References (110)

1. Albertsson A.-C., Eklund M. Influence of molecular structure on the degradation mechanism of degradable polymers: In vitro degradation of poly-(trimethylenecarbonate), poly(trimethylenecarbonate-co-caprolactone), and poly(adipicanhydride). J Appl Polym Sci 1995, 57:87-108.
2. Albertsson A.-C., Varma I.K. polyesters: Synthesis, Properties and Applications. Adv Polym Sci 2002, 157:1-40.
3. Aldini N.N., Caliceti P., Lora S., et al. Calcitonin release system in the treatment of experimental osteoporosis. Histomorphometric evaluation. J Orthop Res 2001, 19(5):955-961.
4. Ali S.A.M., Doherty P.J., Williams D.F. Molecular biointeractions of biomedical polymers with extracellular exudates ad inflammatory cells and their effects on the biocompatibility, in vivo. Biomaterials 1994, 15(10):779-785.
5. Allcock H.R., Lampe F.W., Mark J.E. Contemporary topics in polymer chemistry 2003, Pearson Education, Upper Saddle River. 3rd edn.
6. Ambrosio, A.M., Allcock, H.R., Katti, D.S. and Laurencin, C.T. Degradable polyphosphazene/poly(alpha-hydroxyester) blends: degradation studies. Biomaterials, 23(7): 1667-1672.
7. Anderson J.M. In vivo biocompatibility of implantable delivery systems and biomaterials. Eur J Pharm Biopharm 1994, 40:1-8.
8. Anderson J.A., Shive M.S. Biodegradation and biocompatibility of PLA and PLGA microspheres. Adv Drug Del Rev 1997, 28:5-24.
9. Anderson J.M., Langone J.J. Issues and perspectives on the biocompatibility and immunotoxicity evaluation of implanted controlled release systems. J Control Release 1999, 57(2):107-113.
10. Andriano K.P., Tabata Y., Ikada Y., Heller J. In vitro and in vivo comparison of bulk and surface hydrolysis in absorbable polymer scaffolds for tissue engineering. J Biomed Mater Res 1999, 48(5):602-612.
11. Babensee J.E., McIntire L.V., Mikos A.G. Growth factor delivery for tissue engineering. Pharm Res 2000, 17(5):497-504.
12. Bakker D., van Blitterswijk C.A., Hesseling S.C., Grote J.J. Effect of implantation site on phagocyte/polymer interaction and fibrous capsule formation. Biomaterials 1988, 9(1):14-23.
13. Bates F.S., Fredrickson G.H. Block Copolymer Thermo-dynamics: Theory and Experiment. Thermoplastic Elastomers 1996, Hanser and Gardner, Cincinnati. G. Holden., N.R. Legge, R.P. Quirk., H.E. Schroeder (Eds.).
14. Behravesh E., Yasko A.W., Engel P.S., Mikos A.G. Synthetic biodegradable polymers for orthopaedic applications. Clin Orthop Relat Res 1999, (367 Suppl):S118-S129.
15. Beumer G.J., van Blitterswijk C.A., Ponec M. Degradative behaviour of polymeric matrices in (sub)dermal and muscle tissue of the rat: a quantitative study. Biomaterials 1994, 15(7):551-559.
16. Beumer G.J., van Blitterswijk C.A., Ponec M. Biocompatibility of a biodegradable matrix used as a skin substitute: an in vivo evaluation. J Biomed Mater Res 1994, 28(5):545-552.
17. Bezemer J.M., Grijpma D.W., Dijkstra P.J., et al. A controlled release system for proteins based on poly(ether ester) block-copolymers: polymer network characterization. J Control Release 1999, 62(3):393-405.
18. Bostman O., Hirvensalo E., Vainionpaa S., et al. Ankle fractures treated using biodegradable internal fixation. Clin Orthop Relat Res 1989, (238):195-203.
19. Bulstra S.K., Geesink R.G., Bakker D., et al. Femoral canal occlusion in total hip replacement using a resorbable and flexible cement restrictor. J Bone Joint Surg Br 1996, 78(6):892-898.
20. Burdick J.A., Peterson A.J., Anseth K.S. Conversion and temperature profiles during the photoinitiated polymerization of thick orthopaedic biomaterials. Biomaterials 2001, 22(13):1779-1786.
21. Burkersroda, von F., Sched L., Göpferich A. Why degradable polymers undergo surface erosion or bulk erosion. Biomaterials 2002, 23:4221.
22. Burkoth A.K., Burdick J., Anseth K.S. Surface and bulk modifications to photocross-linked polyanhydrides to control degradation behavior. J Biomed Mater Res 2000, 51(3):352-359.
23. Caliceti P., Veronese F.M., Lora S. Polyphosphazene microspheres for insulin delivery. Int J Pharm 2000, 211(1-2):57-65.
24. Changez M., Koul V., Krishna B., et al. Studies on biodegradation and release of gentamcin sulphate from interpenetrating network hydrogels based on poly(acrylic acid) and gelatin: in vitro and in vivo. Biomaterials 2005, 25(1):139-146.
25. Choi, N.S. and Heller, J. (1978) Drug Delivery devices manufactured from poly(orthoesters) and poly (orthocarbonates). US Patent 4.093.709.
26. Choi S.H., Park T.G. Synthesis and characterization of elastic PLGA/PCL/PLGA tri-block copolymers. J Biomater Sci Polym Ed 2002, 13(10):1163-1173.
27. Chu C.R., Dounchis J.S., Yoshioka M., et al. Osteochondral repair using perichondrial cells. A 1-year study in rabbits. Clin Orthop Relat Res 1997, (340):220-229.
28. Cohen S., Bano M.C., Cima L.G., et al. Design of synthetic polymeric structures for cell transplantation and tissue engineering. Clin Mater 1993, 13(1-4):3-10.
29. Cowie J.M.G. Polymers: Chemistry and Physics of Modern Materials 1997, Blackie Academic and Professional, London. 2nd ed.
30. Deschamps A.A., Claase M.B., Sleijster W.J.et al. Design of segmented poly(ether ester) materials and structures for the tissue engineering of bone. J Control Release 2002, 78(1-3):175-186.
31. Deschamps A.A., Van Apeldoorn A.A., De Bruijn J.D., et al. Poly(ether ester amide)s for tissue engineering. Biomaterials 2003, 24:2643-2652.
32. Edlund U., Albertsson A.C. Degradable polymer microspheres for controlled drug delivery. Adv Polym Sci 2002, 157:67-112.
33. Elbert D.L., Hubbell J.A. Conjugate addition reactions combined with free-radical cross-linking for the design of materials for tissue engineering. Biomacromolecules 2001, 2(2):430-441.
34. Elbert D.L., Pratt A.B., Lutolf M.P., et al. Protein delivery from materials formed by self-selective conjugate addition reactions. J Control Release 2001, 76(1-2):11-25.
35. Fisher J.P., Holland T.A., Dean D., et al. Synthesis and properties of photocross-linked poly(propylene fumarate) scaffolds. J Biomater Sci Polym Ed 2001, 12(6):673-687.
36. Freed L.E., Marquis J.C., Nohria A., et al. Neocartilage formation in vitro and in vivo using cells cultured on synthetic biodegradable polymers. J Biomed Mater Res 1993, 27(1):11-23.
37. Fu K., Pack D.W., Klibanov A.M., Langer R. Visual evidence of acidic environment within degrading poly(lactic-co-glycolic acid) (PLGA) microspheres. Pharm Res 2000, 17(1):100-106.
38. Fulzele S.V., Satturwar P.M., Dorle A.K. Study of the biodegradation and in vivo biocompatibility of novel biomaterials. Eur J Pharm Sci 2003, 29(10):53-61.
39. Geze A., Chourpa I., Boury F., et al. Analyst 1999, 124:37-42.
40. Goedemoed, J.H., Hennink, W.H., Bezemer, J.M. et al. (1998) Polyetherester copolymers as drug delivery matrices. European Patent Application 97202533.2.
41. Göpferich A. Mechanisms of polymer degradation and erosion. Biomaterials 1996, 17:103.
42. Göpferich A., Langer R. Modeling of Polymer Erosion. Macromolecules 1993, 26:4105.
43. Göpferich A., Tessmar J. Polyanhydride degradation and erosion. Adv Drug Del Rev 2002, 54:911-931.
44. Grijpma D.W., Pennings A.J. Copolymers of L-lactide 1. Synthesis, thermal properties and hydrolytic degradation. Macromol Chem Phys 1994, 195:1633-1647.
45. Grijpma D.W., Zondervan G.J., Pennings A.J. High molecular weight copolymers of L-lactide and ε-caprolactone as biodegradable elastomeric implant materials. Polym Bull 1991, 25:327-333.
46. Grizzi I., Garreau H., Li S., Vert M. Hydrolytic degradation of devices based on poly(DL-lactic acid) size dependence. Biomaterials 1995, 16(4):305-311.
47. He S., Yaszemski M.J., Yasko A.W. Synthesis of biodegradable poly(propylene fumarate) networks with poly(propylene fumarate)-diacrylate macromers as cross-linking agents and characterization of their degradation products. Polymer 2000, 42:1251-1260.
48. He S., Yaszemski M.J., Yasko A.W., et al. Injectable biodegradable polymer composites based on poly(propylene fumarate) cross-linked with poly (ethylene glycol)-dimethacrylate. Biomaterials 2000, 21(23):2389-2394.
49. Heller J. Development of poly(ortho esters): a historical overview. Biomaterials 1990, 11:659-665.
50. Honda M., Yada T., Ueda M., Kimata K. Cartilage formation by cultured chondrocytes in a new scaffold made of poly(L-lactide-epsilon-caprolactone) sponge. J Oral Maxillofac Surg 2000, 58(7):767-775.
51. Hutmacher D.W., Schantz T., Zein I., et al. Mechanical properties and cell cultural response of polycaprolactone scaffolds designed and fabricated via fused deposition modeling. J Biomed Mater Res 2001, 55(2):203-216.
52. Jeong, B., Bae, Y.H., Lee, D.S. and Kim, S.W. Biodegradable block copolymers as injectable drug-delivery systems, Nature,388: 860.
53. Kowalski A., Duda A., Penczek S. Kinetics and mechanism of cyclic esterspolymerization initiated with tin(II)octoate. 3. Polymerizationofl,l-dilactide. Macromolecules 2000, 33:7359.
54. Kricheldorf H.R., Kreiser-Saunders I., Stricker A. Polylactones 48. SnOct2-initiated polymerizations of lactide: A mechanistic study. Macromolecules 2000, 33:702.
55. Kuo C.K., Ma P.X. Ionically cross-linked alginate hydrogels as scaffolds for tissue engineering: part 1. Structure, gelation rate and mechanical properties. Biomaterials 2001, 22(6):511-521.
56. Leong K.W., Brott B.C., Langer R. Bioerodible polyanhydrides as drug-carrier matrices. J Biomed Mater Res 1985, 19:941-955.
57. Leong K.W., Kost J., Mathiowitz E., Langer R. Polyanhydrides for controlled release of bioactive agents. Biomaterials 1986, 7(5):364-371.
58. Li S.M. Hydrolytic degradation characteristics of aliphatic polyesters derived from lactic and glycolic acids. J Biomed Mater Res 1999, 48:342-353.
59. Li S.M., Garreau H., Vert M. Structure-property relationships in the case of the degradation of massive poly(α-hydroxy acids) in aqueous media. J Mater Sci Mater Med 1990, 1:131.
60. Li S.M., Garreau H., Vert M. Structure-property relationships in the case of the degradation of massive poly(α-hydroxy acids) in aqueous media. J Mater Sci Mater Med 1990, 1:198.
61. Li S.M., Garreau H., Vert M. Structure-property relationships in the case of the degradation of massive poly(α-hydroxy acids) in aqueous media. Mater Sci Mater Med 1990, 1:123.
62. Lu L., Garcia C.A., Mikos A.G. In vitro degradation of thin poly(DL-lactic-co-glycolic acid) films. J Biomed Mat Res 1999, 46:236-244.
63. Lu L., Peter S.J., Lyman M.D., et al. In vitro and in vivo degradation of porous poly(DL-lactic-co-glycolic acid) foams. Biomaterials 2000, 21:1845-1873.
64. Mahmood T.A., de Jong R., Riesle J., et al. Adhesion-mediated signal transduction in human articular chondrocytes: the influence of biomaterial chemistry and tenascin-C. Exp Cell Res 2004, 301(2):179-188.
65. Mainil-Varlet P., Curtis R., Gogolewski S. Effect of in vivo and in vitro degradation on molecular and mechanical properties of various low-molecular-weight polylactides. J Biomed Mater Res 1997, 36:360-380.
66. Mann B.K., Gobin A.S., Tsai A.T., et al. Smooth muscle cell growth in photopolymerized hydrogels with cell adhesive and proteolytically degradable domains: synthetic ECM analogs for tissue engineering. Biomaterials 2001, 22(22):3045-3051.
67. Mann B.K., Schmedlen R.H., West J.L. Tethered-TGF-beta increases extracellular matrix production of vascular smooth muscle cells. Biomaterials 2001, 22(5):439-444.
68. Matlaga B.F., Yasenchak L.P., Salthouse T.N. Issue response to implanted polymers: the significance of sample shape. J Biomed Mater Res 1976, 10:391-397.
69. McIntire L.V. WTEC Panel Report on Tissue Engineering Research 2002, International Technology Research Institute, World Technology (WTEC) Division.
70. Menei P., Daniel V., Montero-Menei C., et al. Biodegradation and brain tissue reaction to poly(D,L-lactide-co-glycolide) microspheres. Biomaterials 1993, 14(6):470-478.
71. Mensik I., Lamme E.N., Riesle J., Brychta P. Effectiveness and Safety of the PEGT/PBT Copolymer Scaffold as Dermal Substitute in Scar Reconstruction Wounds (Feasibility Trial). Cell Tissue Bank 2002, 3(4):245-253.
72. Middleton J.C., Tipton A.J. Synthetic biodegradable polymers as orthopedic devices. Biomaterials 2000, 21:2335-2346.
73. Moroni L., de Wijn J.R., van Blitterswijk C.A. Three-dimensional fiber-deposited PEOT/PBT copolymer scaffolds for tissue engineering: Influence of porosity, molecular network mesh size, and swelling in aqueous media on dynamic mechanical properties. J Biomed Mater Res A 2005, 75:957-965.
74. Nijenhuis A.J., Grijpma D.W., Pennings A.J. Lewis acid catalyzed polymerisation of L-lactide. Kinetics and mechanism of esters of bulk polymerization. Macromolecules 1992, 25:6419-6424.
75. Odian G. Principles of Polymerization 2004, Wiley Interscience, Hoboken. 4th edn.
76. Olde Riekerink M.B., Claase M.B., Engbers G.H., et al. Gas plasma etching of PEO/PBT segmented block copolymer films. J Biomed Mater Res A 2003, 65(4):417-428.
77. Park T.G. Degradation of Poly(lactic-co-glycolic acid) Microspheres: Effect of Copolymer Composition. Biomaterials 1995, 16:1123-1130.
78. Pêgo A.P., Vleggeert-Lankamp C.L.A.M., Deenen M., et al. J Biomed Mater Res 2003, 67A:876.
79. Pitt C.G., Gu Z. Modification of the rates of chain cleavage of poly(∈-caprolactone) and related polyesters in the solid state. J Control Rel 1987, 4:283-292.
80. Pitt C.G., Chasalow F.I., Hibionada D.M., Klimas D.M., Schindler A. Aliphatic polyesters. I. The degradation of poly(ε-caprolactone) in vivo. J Appl Polym Sci 1981, 26:3779-3787.
81. Pitt C.G., Gratzl M.M., Kimmel G.L., Surles J., Schindler A. Aliphatic polyesters II. The degradation of poly(DL-lactide), poly (ε-caprolactone), and their copolymers in vivo. Biomaterials 1981, 2:215-220.
82. Ratner B.D., Hoffman A.S., Schoen F.J, Lemons J.E. Biomaterials Science, An introduction to materials in medicine 2004, Amsterdam, Academic Press, Elsevier. 2nd edn.
83. Reed A.M., Gilding D.K. Biodegradable polymers for use in surgery-poly(glycolic)/poly(lactic acid) homo and copolymers, 2. In vitro degradation. Polymer 1981, 22:494-498.
84. Sarazin P., Roy X., Favis B.D. Controlled preparation and properties of porous poly(L-lactide) obtained from a co-continuous blend of two biodegradable polymers. Biomaterials 2004, 25(28):5965-5978.
85. Sawhney A.S., Pathak C.P., Hubbell J.A. Bioerodible hydrogels based on photopolymerized poly(ethylene glycol)-co-(alpha-hydroxy acid) diacrylate macromers. Macromolecules 1993, 26:581-587.
86. Schliecker G., Schmidt C., Fuchs S., et al. Int J Pharm 2003, 266:39-49.
87. Smith M.B., March J. March's Advanced Organic Chemistry 2001, Wiley Interscience, New York. 5th edn. J. March (Ed.).
88. Sodergard A., Stolt M. Properties of lactic acid based polymers and their correlation with composition. Prog. Polym. Sci 2002, 27:1123-1163.
89. Spenlehauer G., Vert M., Benoit J.P., Boddaert A. In vitro and in vivo degradation of poly(D,L lactide/glycolide) type microspheres made by solvent evaporation method. Biomaterials 1989, 10:557-563.
90. Stoll G.H., Nimmerfall F., Acemoglu M., et al. Poly(ethylene carbonate)s, part II: degradation mechanisms and parenteral delivery of bioactive agents. J Control Rel 2001, 76:209-225.
91. Suggs L.J., Krishnan R.S., Garcia C.A., et al. In vitro and in vivo degradation of poly(propylene fumarate-co-ethylene glycol) hydrogels. J Biomed Mat Res 1998, 42:312-320.
92. Tamada A., Langer R. Erosion kinetics of hydrolytically degradable polymers. Proc Natl Acad Sci USA 1993, 90:552-556.
93. Therin M., Christel P., Li S., et al. Biomaterials 1992, 13:594-600.
94. Therin M., Christel P., Li S., et al. In vivo degradation of massive poly(α-hydoxy acids): validation of in vitro findings. Biomaterials 1992, 13(9):594-600.
95. Tracy M., Ward K.L., Firouzabadian L., et al. Factors affecting the degradation rate of poly(lactide-co-glycolide) microspheres in vivo and in vitro. Biomaterials 1999, 20:1057-1062.
96. Uhrich K.E., Cannizzaro S.M., Langer R.S., Shakesheff K.M. Polymeric systems for controlled drug release. Chem Rev 1999, 99:3181-3198.
97. Uzunbajakava N., Lenferink A., Kraan Y., et al. Biophys J 2003, 84:3968-3981.
98. Vacanti C.A., Vacanti J.P. The Science of Tissue Engineering. Orthop Clin, North America 2000, 31:351-355.
99. van Blitterswijk C.A., van den Brink J., Leenders H., Bakker D. The effect of PEO ratio on degradation, calcification and bone bonding of PEO/PBT copolymer (PolyActive). Cell and Materials 1993, 3:23-26.
100. van Dijkhuizen-Radersma R., Peters F.L., Stienstra N.A., et al. Control of vitamin B12 release from poly(ethylene glycol)/poly(butylene terephthalate) multiblock copolymers. Biomaterials 2002, 23(6):1527-1536.
101. van Dijkhuizen-Radersma R., Roosma J.R., Kaim P., et al. Biodegradable poly(ether-ester) multiblock copolymers for controlled release applications. J Biomed Mater Res A 2003, 67(4):1294-1304.
102. van Dijkhuizen-Radersma R., Metairie S., Roosma J.R., et al. Controlled release of proteins from degradable poly(ether-ester) multiblock copolymers. J Control Release 2005, 101(1-3):175-186.
103. van Loon (1995). Thesis, The Netherlands: University of Leiden.
104. Vert M. Aliphatic polyesters: great degradable polymers that cannot do everything. Biomacromolecules 2005, 6:538-546.
105. Wang P.Y. Compressed poly(vinyl alcohol)-polycaprolactone admixture as a model to evaluate erodible implants for sustained drug delivery. J Biomed Mater Res 1989, 23(1):91-104.
106. Wang J., Mao H.Q., Leong K.W. A novel biodegradable gene carrier based on polyphosphoester. J Am Chem Soc 2001, 123(38):9480-9481.
107. Wang S., Wan A.C., Xu X., et al. A new nerve guide conduit material composed of a biodegradable poly(phosphoester). Biomaterials 2001, 22(10):1157-1169.
108. Williams D.F. The Williams Dictionary of Biomaterials 1999, Liverpool University Press, Liverpool.
109. Zhang Z., Zou S., Vancso G.J., et al. Biomacromolecules 2005, 6:3404.
110. Zhang Z., Kuijer R., Bulstra S.K., et al. Biomaterials 2006, 27:1741-1748.