New trends in ion-selective electrodes

Electrochemical Sensors, Biosensors and their Biomedical Applications

Volumn , Issue , 2008, Pages 71-114

  Makarychev Mikhailov, Sergey ^a   Shvarev, Alexey ^b   Bakker, Eric ^c  

^a PURDUE UNIVERSITY   (United States)

^b OREGON STATE UNIVERSITY   (United States)

^c CURTIN UNIVERSITY   (Australia)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 84882545662     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1016/B978-012373738-0.50006-4     Document Type: Chapter

References (107)

1. R.P. Buck and E. Lindner (2001) Tracing the history of selective ion sensors. Anal. Chem. 73 88A-97A.
2. E. Bakker, P. Buhlmann and E. Pretsch (1997) Carrier-based ion-selective electrodes and bulk optodes. 1. General characteristics. Chem. Rev. 97 3083-3132.
3. P. Buhlmann, E. Pretsch and E. Bakker (1998) Carrier-based ion-selective electrodes and bulk optodes. 2. Ionophores for potentiometric and optical sensors. Chem. Rev. 98 1593-1687.
4. E. Bakker, P. Buhlmann and E. Pretsch (1999) Polymer membrane ion-selective electrodes—what are the limits? Electroanalysis 11 915-933.
5. E. Bakker and M. Telting-Diaz (2002) Electrochemical sensors. Anal. Chem. 74 2781-2800.
6. E. Bakker, P. Buhlmann and E. Pretsch (2004) The phase-boundary potential model. Talanta 63 3-20.
7. S. Mathison and E. Bakker (1998) Effect of transmembrane electrolyte diffusion on the detection limit of carrier-based potentiometric ion sensors. Anal. Chem. 70 303-309.
8. T. Sokalski, A. Ceresa, T. Zwickl and E. Pretsch (1997) Large improvement of the lower detection limit of ion-selective polymer membrane electrodes. J. Am. Chem. Soc. 119 11 347-11 348.
9. E. Bakker and E. Pretsch (2005) Potentiometric sensors for trace-level analysis. TrAC, Trends Anal. Chem. 24 199-207.
10. R.D. Johnson and L.G. Bachas (2003) Ionophore-based ion-selective potentiometric and optical sensors. Anal. Bioanal. Chem. 376 328-341.
11. J. Bobacka, J.A. Ivaska and A. Lewenstam (2003) Potentiometric ion sensors based on conducting polymers. Electroanalysis 15 366-374.
12. E. Lindner and R.P. Buck (2000) Microfabricated potentiometric electrodes and their in vivo applications. Anal. Chem. 72 336A-345A.
13. A. Legin, A. Rudnitskaya and Y. Vlasov (2002) Electronic tongues: sensors, systems, applications. Sensors Update 10 143-188.
14. E. Bakker and M.E. Meyerhoff (2002) Ion-selective electrodes for measurements in biological fluids. A.J. Bard, M. Stratmann, J.S. Wilson (Eds) Encyclopedia of Electrochemistry Wiley
15. E. Bakker, D. Diamond, A. Lewenstam and E. Pretsch (1999) Ion sensors: current limits and new trends. Anal. Chim. Acta 393 11-18.
16. R.W. Burnett, A.K. Covington, N. Fogh-Andersen, W.R. Kulpmann, A. Lewenstam, A.H.J. Maas, O. Muller-Plathe, A.L. Vankessel and W.G. Zijlstra (2000) Use of ion-selective electrodes for blood-electrolyte analysis. Recommendations for nomenclature, definitions and conventions. Clin. Chem. Lab. Med. 38 363-370.
17. R.P. Buck, V.V. Cosofret, E. Lindner, S. Ufer, M.B. Madaras, T.A. Johnson, R.B. Ash and M.R. Neuman (1995) Microfabrication technology of flexible membrane-based sensors for in-vivo applications. Electroanalysis 7 846-851.
18. V.V. Cosofret and R.P. Buck (1993) Recent advances in pharmaceutical analysis with potentiometric membrane sensors. Crit. Rev. Anal. Chem. 24 1-58.
19. S.K. Menon, A. Sathyapalan and Y.K. Agrawal (1997) Ion selective electrodes in pharmaceutical analysis — a review. Rev. Anal. Chem. 16 333-353.
20. D. Ammann (1986) Ion-Selective Microelectrodes. Berlin: Springer-Verlag
21. H. Suzuki (2000) Advances in the microfabrication of electrochemical sensors and systems. Electroanalysis 12 703-715.
22. W.E. Morf (1981) The Principles of Ion-Selective Electrodes and of Membrane Transport. New York: Elsevier
23. U. Schaller, E. Bakker, U.E. Spichiger and E. Pretsch (1994) Ionic additives for ion-selective electrodes based on electrically charged carriers. Anal. Chem. 66 391-398.
24. M. Perry, E. Lobel and R. Bloch (1976) Mechanism of a polymeric valinomycin-based potassium specific electrode. J. Membr. Sci. 1 223-235.
25. R. Eugster, P.M. Gehrig, W.E. Morf, U.E. Spichiger and W. Simon (1991) Selectivity-modifying influence of anionic sites in neutral-carrier-based membrane electrodes. Anal. Chem. 63 2285-2289.
26. E. Bakker, R.K. Meruva, E. Pretsch and M.E. Meyerhoff (1994) Selectivity of polymer membrane-based ion-selective electrodes — self-consistent model describing the potentiometric response in mixed ion solutions of diff. Anal. Chem. 66 3021-3030.
27. R.P. Buck and E. Lindner (1994) Recommendations for nomenclature of ion-selective electrodes (Iupac Recommendations 1994). Pure Appl. Chem. 66 2527-2536.
28. E. Bakker (1996) Determination of improved selectivity coefficients of polymer membrane ion-selective electrodes by conditioning with a discriminated ion. J. Electrochem. Soc. 43 L83-L85.
29. P.C. Meier, W.E. Morf, M. Laubli and W. Simon (1984) Evaluation of the optimum composition of neutral-carrier membrane electrodes with incorporated cation-exchanger sites. Anal. Chim. Acta 156 1-8.
30. M.M. Shultz, O.K. Stefanova, S.S. Mokrov and K.N. Mikhelson (2002) Potentiometric estimation of the stability constants of ion-ionophore complexes in ion-selective membranes by the sandwich membrane method: theory, advantages. Anal. Chem. 74 510-517.
31. T. Vigassy, C.G. Huber, R. Wintringer and E. Rretsch (2005) Monolithic capillary-based ion-selective electrodes. Anal. Chem. 77 3966-3970.
32. Y. Mi, S. Mathison and E. Bakker (1999) Polyion sensors as liquid junction-free reference electrodes. J. Electrochem. Soc. 2 198-200.
33. E. Bakker (1999) Hydrophobic membranes as liquid junction-free reference electrodes. Electroanalysis 11 788-792.
34. S.-C. Ma, V.C. Yang and M.E. Meyerhoff (1992) Heparin-responsive electrochemical sensor — a preliminary study. Anal. Chem. 64 694.
35. E.J. Cohen, L.J. Camerlengo and J.P. Dearing (1980) Activated clotting times and cardiopulmonary bypass: I. The effect of hemodilution and hypothermia upon activated clotting time. J. Extra Corpor. Technol. 12 139-141.
36. S.-C. Ma, V.C. Yang, B. Fu and M.E. Meyerhoff (1993) Electrochemical sensor for heparin — further characterization and bioanalytical applications. Anal. Chem. 65 2078.
37. J.H. Yun, V.C. Yang and M.E. Meyerhoff (1995) Protamine-sensitive polymer membrane electrode: characterization and bioanalytical applications. Anal. Biochem. 224 212-220.
38. B. Fu, E. Bakker, J.H. Yun, V.C. Yang and M.E. Meyerhoff (1994) Response mechanism of polymer membrane-based potentiometric polyion sensors. Anal. Chem. 66 2250-2259.
39. J.H. Yun, B. Fu, M.E. Meyerhoff and V.C. Yang (1994) A disposable, coated wire heparin sensor. ASAIO J. 40 M401-M405.
40. J.H. Yun, L. Lee, J.A. Wahr, V.C. Yang and M.E. Meyerhoff (1995) Clinical application of disposable heparin sensors. Blood heparin measurements during open heart surgery. ASAIO J. 41 M661-M664.
41. N. Ramamurthy, N. Baliga, J. Wahr, U. Schaller, V.C. Yang and M.E. Meyerhoff (1998) Improved polycation-sensitive membrane electrode for monitoring heparin levels in whole blood via protamine titration. Clin. Chem. 606-613.
42. N. Ramamurthy, N. Baliga, T.W. Wakefield, P.C. Andrews, V.C. Yang and M.E. Meyerhoff (1999) Determination of low-molecular-weight heparins and their binding to protamine and a protamine analog using polyion-sensitive membrane electrodes. Anal. Biochem. 266 116-124.
43. D.P. Thomas and R.E. Merton (1982) A low-molecular weight heparin compared with unfractionated heparin. Thromb. Res. 28 343-350.
44. N. Durust and M.E. Meyerhoff (2001) Determination of pentosan polysulfate and its binding to polycationic species using polyion-sensitive membrane electrodes. Anal. Chim. Acta 432 253-260.
45. J.M. Esson and M.E. Meyerhoff (1997) Polyion-sensitive membrane electrodes for detecting phosphate-rich biological polyanions. Electroanalysis 9 1325-1330.
46. E.B. Ong and A. Johnson (1976) Anal. Biochem. 568-582.
47. L.-C. Chang, M.E. Meyerhoff and V.C. Yang (1999) Electrochemical assay of plasminogen activators in plasma using polyion-sensitive membrane electrode detection. Anal. Biochem. 276 8-12.
48. I.S. Han, N. Ramamurthy, J.H. Yun, U. Schaller, M.E. Meyerhoff and V.C. Yang (1996) Selective monitoring of peptidase activities with synthetic polypeptide substrates and polyion-sensitive membrane electrode detection. FASEB J. 10 1621-1626.
49. S. Mathison and E. Bakker (1999) Renewable pH cross-sensitive potentiometric heparin sensors with incorporated electrically charged H+ ionophores. Anal. Chem. 71 4614-4621.
50. A. Shvarev and E. Bakker (2003) Pulsed galvanostatic control of ionophore-based polymeric ion sensors. Anal. Chem. 75 4541-4550.
51. A. Shvarev and E. Bakker (2005) Response characteristics of a reversible electrochemical sensor for the polyion protamine. Anal. Chem. 77 5221-5228.
52. E. Bakker and A.J. Meir (2003) How do pulsed amperometric ion sensors work? A simple PDE model. Siam Review 45 327-344.
53. A. Shvarev and E. Bakker (2003) Reversible electrochemical detection of nonelectroactive polyions. J. Am. Chem. Soc. 125 11[ts]192-11[ts]193.
54. S. Makarychev-Mikhailov, A. Shvarev and E. Bakker (2004) Pulstrodes: triple pulse control of potentiometric sensors. J. Am. Chem. Soc. 126 10 548-10 549.
55. A. Shvarev and E. Bakker (2004) Distinguishing free and total calcium with a single pulsed galvanostatic ion-selective electrode. Talanta 63 195-200.
56. T. Sokalski, T. Zwickl, E. Bakker and E. Pretsch (1999) Lowering the detection limit of solvent polymeric ion-selective membrane electrodes. 1. Steady-state ion flux considerations. Anal. Chem. 71 1204-1209.
57. T. Zwickl, T. Sokalski and E. Pretsch (1999) Steady-state model calculations predicting the influence of key parameters on the lower detection limit and ruggedness of solvent polymeric membrane ion-selec. Electroanalysis 11 673-680.
58. S. Makarychev-Mikhailov, A. Shvarev, and E. Bakker, Calcium pulstrodes for measurements in physiological fluids. Anal. Chem. (submitted).
59. D. Henn and K. Cammann (2000) Voltammetric ion-selective electrodes (VISE). Electroanalysis 12 1263-1271.
60. M. Senda, H. Katano and M. Yamada (1999) Amperometric ion-selective electrode. Voltammetric theory and analytical applications at high concentration and trace levels. J. Electroanal. Chem. 468 34-41.
61. M. Senda, H. Katano and M. Yamada (1999) Amperometric ion-selective electrode. Voltammetric theory and analytical applications at high concentration and trace levels. J. Electroanal. Chem. 475 90-98.
62. Z. Samec, E. Samcova and H.H. Girault (2004) Ion amperometry at the interface between two immiscible electrolyte solutions in view of realizing the amperometric ion-selective electrode. Talanta 63 21-32.
63. S. Sawada, H. Torii, T. Osakai and T. Kimoto (1998) Pulse amperometric detection of lithium in artificial serum using a flow injection system with a liquid/liquid-type ion-selective electrode. Anal. Chem. 70 4286-4290.
64. Y. Yuan and S. Amemiya (2004) Facilitated protamine transfer at polarized water/1,2-dichloroethane interfaces studied by cyclic voltammetry and chronoamperometry at micropipet electrodes. Anal. Chem. 76 6877-6886.
65. J.D. Guo, Y. Yuan and S. Amemiya (2005) Voltammetric detection of heparin at polarized blood plasma/1,2-dichloroethane interfaces. Anal. Chem. 77 5711-5719.
66. D.G. Hafeman, J.W. Parce and H.M. McConnell (1988) Light-addressable potentiometric sensor for biochemical systems. Science 240 1182-1185.
67. M. Nakao, T. Yoshinobu and H. Lwasaki (1994) Scanning-laser-beam semicomductor pH imaging sensor. Sens. Actuators, B 20 119-123.
68. E. Bakker (2004) Electrochemical sensors. Anal. Chem. 76 3285-3298.
69. M. Nakao, S. Inoue, T. Yoshinobu and H. Iwasaki (1996) High-resolution pH imaging sensor for microscopic observation of microorganisms. Sens Actuators, B 34 234-239.
70. Y. Ermolenko, T. Yoshinobu, Y. Mourzina, K. Furuichi, S. Levichev, Y. Vlasov, M.J. Schoning and H. Iwasaki (2002) Lithium sensor based on the laser scanning semiconductor transducer. Anal. Chim. Acta 459 1-9.
71. Y. Ermolenko, T. Yoshinobu, Y. Mourzina, K. Furuichi, S. Levichev, M.J. Schoning, Y. Vlasov and H. Iwasaki (2003) The double K+/Ca2+ sensor based on laser scanned silicon transducer (LSST) for multi-component analysis. Talanta 59 785-795.
72. Y. Mourzina, Y. Ermolenko, T. Yoshinobu, Y. Vlasov, H. Iwasaki and M.J. Schoning (2003) Anion-selective light-addressable potentiometric sensors (LAPS) for the determination of nitrate and sulphate ions. Sens Actuators, B 91 32-38.
73. T. Yoshinobu, M.J. Schoning, R. Otto, K. Furuichi, Y. Mourzina, Y. Ermolenko and H. Iwasaki (2003) Portable light-addressable potentiometric sensor (LAPS) for multisensor applications. Sens. Actuators, B 95 352-356.
74. Y. Ermolenko, T. Yoshinobu, Y. Mourzina, Y. Vlasov, M.J. Schoning and H. Iwasaki (2004) Laser-scanned silicon transducer (LSST) as a multisensor system. Sens. Actuators, B 103 457-462.
75. S. Inoue, M. Nakao, T. Yoshinobu and H. Iwasaki (1996) Chemical-imaging sensor using enzyme. Sens. Actuators, B 32 23-26.
76. E. Lindner, K. Toth, M. Horvath, E. Pungor, B. Agai, I. Bitter, L. Toke and Z. Hell (1985) Bis-crown ether derivatives as ionophores for potassium selective electrodes. Fres. Z. Anal. Chem. 322 157-163.
77. R. Ludwig and N.T.K. Dzung (2002) Calixarene-based molecules for cation recognition. Sensors 2 397-416.
78. U. Schefer, D. Ammann, E. Pretsch, U. Oesch and W. Simon (1986) Neutral carrier based Ca-2+-selective electrode with detection limit in the sub-nanomolar range. Anal. Chem. 58 2282-2285.
79. J.H. Shim, I.S. Jeong, M.H. Lee, H.P. Hong, J.H. On, K.S. Kim, H.S. Kim, B.H. Kim, G.S. Cha and H. Nam (2004) Ion-selective electrodes based on molecular tweezer-type neutral carriers. Talanta 63 61-71.
80. M.M.G. Antonisse and D.N. Reinhoudt (1999) Potentiometric anion selective sensors. Electroanalysis 11 1035-1048.
81. F.P. Schmidtchen and M. Berger (1997) Artificial organic host molecules for anions. Chem. Rev. 97 1609-1646.
82. P.D. Beer and P.A. Gale (2001) Anion recognition and sensing: the state of the art and future perspectives. Angew. Chem., Int. Ed. 40 487-516.
83. L. Gorski, E. Malinowska, P. Parzuchowski, W. Zhang and M.E. Meyerhoff (2003) Recognition of anions using metalloporphyrin-based ion-selective membranes: state-of-the-art. Electroanalysis 15 1229-1235.
84. P. Schulthess, D. Ammann, B. Krautler, C. Caderas, R. Stepanek and W. Simon (1985) Nitrite-selective liquid membrane-electrode. Anal. Chem. 57 1397-1401.
85. A. Malon, A. Radu, W. Qin, Y. Qin, A. Ceresa, M. Maj-Zurawska, E. Bakker and E. Pretsch (2003) Improving the detection limit of anion-selective electrodes: an iodide-selective membrane with a nanomolar detection limit. Anal. Chem. 75 3865-3871.
86. S. Makarychev-Mikhailov, A. Legin, J. Mortensen, S. Levitchev and Y. Vlasov (2004) Potentiometric and theoretical studies of the carbonate sensors based on 3-bromo-4-hexyl-5-nitrotrifluoroacetophenone. Analyst 129 213-218.
87. E. Bakker and E. Pretsch (1995) Lipophilicity of tetraphenylborate derivatives as anionic sites in neutral carrier-based solvent polymeric membranes and lifetime of corresponding ion-selecti. Anal. Chim. Acta 309 7-17.
88. Y. Qin and E. Bakker (2003) A copolymerized dodecacarborane anion as covalently attached cation exchanger in ion-selective sensors. Anal. Chem. 75 6002-6010.
89. V.V. Egorov, E.M. Rakhman'ko, E.B. Okaev, E.V. Pomelenok and V.A. Nazarov (2004) Effects of ion association of lipophilic quaternary ammonium salts in ion-exchange and potentiometric selectivity. Talanta 63 119-130.
90. R. Eugster, T. Rosatzin, B. Rusterholz, B. Aebersold, U. Pedrazza, D. Ruegg, A. Schmid, U.E. Spichiger and W. Simon (1994) Plasticizers for liquid polymeric membranes of ion-selective chemical sensors. Anal. Chim. Acta 289 1-13.
91. Y. Qin, S. Peper, A. Radu, A. Ceresa and E. Bakker (2003) Plasticizer-free polymer containing a covalently immobilized Ca2+-selective ionophore for potentiometric and optical sensors. Anal. Chem. 75 3038-3045.
92. P. Anker, E. Wieland, D. Ammann, R.E. Dohner, R. Asper and W. Simon (1981) Neutral carrier based ion-selective electrode for the determination of total calcium in blood-serum. Anal. Chem. 53 1970-1974.
93. P.G. Boswell and P. Buhlmann (2005) Fluorous bulk membranes for potentiometric sensors with wide selectivity ranges: observation of exceptionally strong ion pair formation. J. Am. Chem. Soc. 127 8958-8959.
94. R.W. Cattrall and H. Freiser (1971) Coated wire ion selective electrodes. Anal. Chem. 43 1905-1906.
95. M. Fibbioli, W.E. Morf, M. Badertscher, N.F. de Rooij and E. Pretsch (2000) Potential drifts of solid-contacted ion-selective electrodes due to zero-current ion fluxes through the sensor membrane. Electroanalysis 12 1286-1292.
96. K.Y. Chumbimuni-Torres, N. Rubinova, A. Radu, L.T. Kubota and E. Bakker (2005) A universal recipe for solid contact potentiometric sensors for trace level measurements. Submitted
97. M. Vazquez, J. Bobacka, M. Luostarinen, K. Rissanen, A. Lewenstam and A. Ivaska (2005) Potentiometric sensors based on poly(3,4-ethylenedioxythiophene) (PEDOT) doped with sulfonated calix[4]arene and calix[4]resorcarenes. J. Solid State Electrochem. 9 312-319.
98. A. Lewenstam, J. Bobacka and A. Ivaska (1994) Mechanism of ionic and redox sensitivity of p-type conducting polymers. 1 Theory. J. Electroanal. Chem. 368 23-31.
99. M.H. Schoenfisch, K.A. Mowery, M.V. Rader, N. Baliga, J.A. Wahr and M.E. Meyerhoff (2000) Improving the thromboresistivity of chemical sensors via nitric oxide release: fabrication and in vivo evaluation of NO-releasing oxygen-sensing catheters. Anal. Chem. 72 1119-1126.
100. M.J. Berrocal, R.D. Johnson, I.H.A. Badr, M. Liu, D. Gao and L.G. Bachas (2002) Improving the blood compatibility of ion-selective electrodes by employing poly(MPC-co-BMA), a copolymer containing phosphorylcholine, as a membrane coating. Anal. Chem. 74 3644-3648.
101. M.J. Berrocal, I.H.A. Badr, D. Gao and L.G. Bachas (2001) Reducing the thrombogenicity of ion-selective electrode membranes through the use of a silicone-modified segmented polyurethane. Anal. Chem. 73 5328-5333.
102. O.T. Guenat, J.F. Dufour, P.D. van der Wal, W.E. Morf, N.F. de Rooij and M. Koudelka-Hep (2005) Microfabrication and characterization of an ion-selective microelectrode array platform. Sens. Actuators, B 105 65-73.
103. W. Wroblewski, A. Dybko, E. Malinowska and Z. Brzozka (2004) Towards advanced chemical microsensors — an overview. Talanta 63 33-39.
104. B.D. Pendley, R.E. Gyurcsanyi, R.P. Buck and E. Lindner (2001) A chronoamperometric method to estimate changes in the membrane composition of ion-selective membranes. Anal. Chem. 73 4599-4606.
105. D. Diamond (Ed.) (1998) Principles of Chemical and Biological Sensors New York: Wiley Interscience
106. A. Legin, A. Rudnitskaya, D. Clapham, B. Seleznev, K. Lord and Y. Vlasov (2004) Electronic tongue for pharmaceutical analytics: quantification of tastes and masking effects. Anal. Bioanal. Chem. 380 36-45.
107. V.V. Cosofret, M. Erdosy, T.A. Johnson, R.P. Buck, R.B. Ash and M.R. Neuman (1995) Microfabricated sensor arrays sensitive to Ph and K+ for ionic distribution measurements in the beating heart. Anal. Chem. 67 1647-1653.