Flow boiling heat transfer of R134a in a microchannel heat sink

ASME 2012 10th Int. Conf. on Nanochannels, Microchannels, and Minichannels Collocated with the ASME 2012 Heat Transfer Summer Conf. and the ASME 2012 Fluids Engineering Division Sum, ICNMM 2012

Volumn , Issue , 2012, Pages 29-38

  Do Nascimento, Francisco J ^a   Leão, Hugo L S L ^a   Ribatski, Gherhardt ^a  

^a UNIVERSITY OF SÃO PAULO   (Brazil)

Author keywords

[No Author keywords available]

Indexed keywords

BOILING CONDITIONS; FLOW BOILING HEAT TRANSFER; HEAT TRANSFER AREA; LIQUID SUBCOOLING; MICRO CHANNEL HEAT SINKS; ONSET OF NUCLEATE BOILING; SATURATION TEMPERATURE; THERMAL PERFORMANCE;

HEAT FLUX; HEAT TRANSFER; HEATING EQUIPMENT; MICROCHANNELS; NUCLEATE BOILING; VELOCITY;

LIQUIDS;

EID: 84882441290     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1115/ICNMM2012-73026     Document Type: Conference Paper

References (42)

1. Ribatski, G., Cabezas-Gomez, L., Navarro, H.A. and Saiz-Jabardo, J.M., 2007, "The Advantages of Evaporation in Micro-Scale Channels to Cool Microelectronics Devices", Thermal Engineering, 6 (2), pp. 34-39.
2. Moore, G.E., 1965, "Cramming More Components onto Integrated Circuits", Electronics, 38 (8), pp.114-117.
3. Intel Corporation, 2012, "Products Datasheet", http://www.intel.com, accessed on 02/16/2012.
4. Tuckerman, D.B. and Pease, R.F.W., 1981, "High- Performance Heat Sinking for VLSI", IEEE Electron Device Letters, EDL-2 (5), pp. 126-129.
5. Yan, Y.Y. and Lin, T.F., 1998, "Evaporation Heat Transfer and Pressure Drop of Refrigerant R-134a in a Small Pipe", International Journal of Heat and Mass Transfer, 41 (24), pp. 4183-4194.
6. Qu, W. and Mudawar, I., 2003, "Measurement and Prediction of Pressure Drop in Two-Phase Micro-Channel Heat Sinks", International Journal of Heat and Mass Transfer, 46 (15), pp. 2737-2753.
7. Hetsroni, G., Mosyak, A., Pogrebnyak, E. and Segal, Z., 2005, "Explosive Boiling of Water in Parallel Micro- Channels", International Journal of Multiphase Flow, 31 (4), pp. 371-392.
8. Lee, P.S., Garimella, S.V. and Liu, D., 2005, "Investigation of Heat Transfer in Rectangular Microchannels", International Journal of Heat and Mass Transfer, 48 (9), pp. 1688-1704.
9. Lee, J. and Mudawar, I., 2005, "Two-Phase Flow in High-Heat-Flux Micro-Channel Heat Sink for Refrigeration Cooling Applications: Part I - Pressure Drop Characteristics", International Journal of Heat and Mass Transfer, 48 (5), pp. 928-940.
10. Lee, J. and Mudawar, I., 2005, "Two-Phase Flow in High-Heat-Flux Micro-Channel Heat Sink for Refrigeration Cooling Applications: Part II - Heat Transfer Characteristics", International Journal of Heat and Mass Transfer, 48 (5), pp. 941-955.
11. Xu, J., Gan, Y., Zhang, D. and Li, X., 2005, "Microscale Boiling Heat Transfer in a Micro-Timescale at High Heat Fluxes", Journal of Micromechanics and Microengineering, 15 (2), pp. 362-376.
12. Xu, J., Shen, S., Gan, Y., Li, Y., Zhang, W. and Su, Q., 2005, "Transient Flow Pattern Based Microscale Boiling Heat Transfer Mechanism", Journal of Micromechanics and Microengineering, 15 (6), pp. 1344-1361.
13. Henning, T., Brandner, J.J., Schubert, K., Lorenzini, M. and Morini, G.L., 2006, "Evalution of Different Microchannel Array Evaporator Designs", Proc. ECI International Conference on Boiling Heat Transfer, Spoleto.
14. Chen, T. and Garimella, S.V., 2006, "Measurements and High-Speed Visualizations of Flow Boiling of a Dielectric Fluid in a Silicon Microchannel Heat Sink", International Journal of Multiphase Flow, 32 (8), pp. 957-971.
15. Yun, R., Heo, J.H. and Kim, Y., 2006, "Evaporative Heat Transfer and Pressure Drop of R410A in Microchannels", International Journal of Refrigeration, 29 (1), pp. 92-100.
16. Colgan, E.G., Furman, B., Gaynes, M., LaBianca, N., Magerlein, J.H., Bezama, R., Marston, K. and Schmidt, R., 2007, "High Performance and Subambient Silicon Microchannel Cooling", Journal of Heat Transfer, 129 (8), 1046-1051.
17. Cullion, R., Pence, D., Luburdy, J. and Narayanan, V., 2007, "Void Fraction Variations in a Fractal-Like Branching Microchannel Network", Heat Transfer Engineering, 28 (10), pp. 806-816.
18. Kuo, C.J. and Peles, Y., 2007, "Local Measurement of Flow Boiling in Structured Surface Microchannels", International Journal of Heat and Mass Transfer, 50 (23-24), pp. 4513-4526.
19. Kuo, C.J. and Peles, Y., 2009, "Pressure Effects on Flow Boiling Instabilities in Parallel Microchannels", International Journal of Heat and Mass Transfer, 52 (1-2), pp. 271-280.
20. Liu, D. and Garimella, S.V., 2007, "Flow Boiling Heat Transfer in Microchannels", Journal of Heat Transfer, 129 (10), pp. 1321-1332.
21. Schneider, B., Kosar, A. and Peles, Y., 2007, "Hydrodynamic Cavitation and Boiling in Refrigerant (R-123) Flow Inside Microchannels", International Journal of Heat and Mass Transfer, 50 (13-14), pp. 2838-2854.
22. Agostini, B., Thome, J.R., Fabbri, M., Michel, B., Calmi, D. and Kloter, U., 2008, "High Heat Flux Flow Boiling in Silicon Multi-Microchannels - Part I: Heat Transfer Characteristics of Refrigerant R236fa", International Journal of Heat and Mass Transfer, 51 (21-22), pp. 5400-5414.
23. Agostini, B., Thome, J.R., Fabbri, M., Michel, B., Calmi, D. and Kloter, U., 2008, "High Heat Flux Flow Boiling in Silicon Multi-Microchannels - Part II: Heat Transfer Characteristics of Refrigerant R245fa", International Journal of Heat and Mass Transfer, 51 (21-22), pp. 5415-5425.
24. Agostini, B., Revellin, R., Thome, J.R., Fabbri, M., Michel, B., Calmi, D. and Kloter, U., 2008, "High Heat Flux Flow Boiling in Silicon Multi-Microchannels - Part III: Saturated Critical Heat Flux of R236a and Two-Phase Pressure Drops", International Journal of Heat and Mass Transfer, 51 (21-22), pp. 5426-5442.
25. Bertsch, S.S., Groll, E.A. and Garimella, S.V., 2008, "Refrigerant Flow Boiling Heat Transfer in Parallel Microchannels as a Function of Local vapor quality", International Journal of Heat and Mass Transfer, 51 (19-20), pp. 4775-4787.
26. Bogojevic, D., Sefiane, K., Walton, A.J., Lin, H. and Cummins, G., 2008, "Two-Phase Flow Instabilities in Microchannels", Proc. ECI International Conference on Heat Transfer and Fluid Flow in Microscale, Whistler.
27. Harirchian, T. and Garimella, S.V., "Effect of Channel Dimension, Heat Flux and Mass Flux on Flow Boiling Regimes in Microchannels", International Journal of Multiphase Flow, 35 (4), pp. 349-362.
28. Kosar, A., Ozdemir, M.R. and Keskinoz, M., 2009, "Pressure Drop Across Micro-Pin Heat Sinks Under Boiling Conditions", Proc. ECI International Conference on Boiling Heat Transfer, Florianópolis.
29. Lu, C.T. and Pan, C., 2009, "Convective Boiling in a Parallel Microchannel Heat Sink with a Diverging Cross- Section Design and Artificial Nucleation Sites", Proc. ECI International Conference on Boiling Heat Transfer, Florianópolis.
30. Mauro, A.W., Thome, J.R., Toto, D. and Vanoli, G.P., 2010, "Saturated Critical Heat Flux in a Multi-Microchannel Heat Sink Fed by a Split Flow System", Experimental Thermal and Fluid Science, 34 (1), pp. 81-92.
31. Park, J.E. and Thome, J.R., 2010, "Critical Heat Flux in Multi-Microchannel Copper Elements with Low Pressure Refrigerants", International Journal of Heat and Mass Transfer, 53 (1-3), 110-122.
32. Costa-Patry, E., Olivier, J., Nichita, B.A., Michel, B. and Thome, J.R., 2011, "Two-Phase Flow of Refrigerants in 85 μm-Wide Multi-Microchannels: Part I - Pressure Drop", International Journal of Heat and Fluid Flow, 32 (2), pp. 451- 463.
33. Costa-Patry, E., Olivier, J., Michel, B. and Thome, J.R., 2011, "Two-Phase Flow of Refrigerants in 85 μm-Wide Multi-Microchannels: Part II - Heat Transfer with 35 Local Heaters", International Journal of Heat and Fluid Flow, 32 (2), pp. 464-476.
34. Kaew-On, J., Sakamatapan, K. and Wongwises, S., 2011, "Flow Boiling Heat Transfer of R134a in the Multiport Minichannel Heat Exchangers", Experimental Thermal and Fluid Science, 35 (2), pp. 364-374.
35. Harirchian, T., and Garimella, S.V., 2012, "Flow Regime-Based Modeling of Heat Transfer and Pressure Drop in Microchannel Flow Boiling", International Journal of Heat and Mass Transfer, 55 (4), pp. 1246-1260.
36. Ribatski, G., Zhang, W., Consolini, C., Xu, J. and Thome, J.R., 2007, "On the Prediction of Heat Transfer in Micro-Scale Flow Boiling", Heat Transfer Engineering, 28 (10), pp. 842-851.
37. Tibiriçá, C.B. and Ribatski, G., 2010, "Flow Boiling Heat Transfer of R134a and R245fa in a 2.3 mm Tube", International Journal of Heat and Mass Transfer, 53 (11-12), pp. 2459-2468.
38. Gnielinski, V., 1976, "New Equations for Heat and Mass Transfer in Turbulent Pipe and Channel Flow", International Chemical Engineering, 16 (2), pp.359-368.
39. Tibiriçá, C.B., 2011, "A Theoretical and Experimental Study on Flow Boiling Heat Transfer and Critical Heat Flux in Microchannels", Ph.D. thesis, University of São Paulo, São Carlos, http://www.teses.usp.br/teses/disponiveis/18/18147/tde-22092011-161901/.
40. Klein, S.A, 2003, "Engineering Equation Solver (EES)", Academic Version.
41. Abernethy, R.B. and Thompson, J.W., 1973, "Handbook Uncertainty in Gas Turbine Measurements", Arnold Engineering Development Center, Tennessee.
42. Moffat, R.J., 1988, "Describing the Uncertainties in Experimental Results", Experimental Thermal and Fluid Science, 1 (1), pp. 3-17.