CFD modeling of jet impingement during heating and cooling of foods

Computational Fluid Dynamics in Food Processing

Volumn , Issue , 2007, Pages 487-504

  Olsson, Eva E M ^a   Trägårdh, Christian ^b  

^a Div of Fluid Dynamics   (Sweden)

^b LUND UNIVERSITY   (Sweden)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 84881372966     PISSN: None     EISSN: None     Source Type: Book    
DOI: None     Document Type: Chapter

References (49)

1. T.M. Midden. Impingement air baking for snack food. Cereal Foods World 40 (8): 532-535, 1995.
2. I.S. Dogan and C.E. Walker. Effects of impingement oven parameters on high-ratio cake baking. Cereal Foods World 44 (10): 710-714, 1999.
3. H.E. Marcroft and M.V. Karwé. Flow field in a hot air jet impingement oven. Part I: A single impinging jet. Journal of Food Process and Preservation 23: 217-233, 1999.
4. U. Wählby, C. Skjöldebrand, and E. Junker. Impact of impingement on cooking time and food quality. Journal of Food Engineering 43 (3): 179-187, 2000.
5. E.E.M. Olsson, A.C. Trägårdh, and L.M. Ahrné. Effects of near infrared radiation and jet impingement heat transfer on crust formation of bread. Journal of Food Science 70 (8): E484-E491, 2005.
6. R. Borquez, W. Wolf, W.D. Koller, and W.E.L. Spiess. Impinging jet drying of pressed fish cake. Journal of Food Engineering 40 (1-2): 113-120, 1999.
7. R.G. Moreira. Impingement drying of foods using hot air and superheated steam. Journal of Food Engineering 49: 291-295, 2001.
8. E.E.M. Olsson, L.M. Ahrné, and A.C. Trägårdh. Heat transfer from a slot air jet impinging on a circular cylinder. Journal of Food Engineering 63: 393-401, 2004.
9. V.O. Salvadori and R.H. Mascheroni. Analysis of impingement freezers performance. Journal of Food Engineering 54 (2): 133-140, 2002.
10. A. Sarkar and R.P. Singh. Modeling flow and heat transfer during freezing of foods in forced airstreams. Journal of Food Science 69 (9): 488-496, 2004.
11. D.P. Smith. Cooking apparatus, U.S. patent 3884213, May 20, 1975.
12. R. Gardon and J.C. Akfirat. The role of turbulence in determining heat-transfer characteristics of impinging jets. International Journal of Heat and Mass Transfer 8: 1261-1272, 1965.
13. H. Martin. Heat and mass transfer between impinging gas jets and solid surfaces. Advances in Heat Transfer 13 (1): 1-60, 1977.
14. S.J. Downs and E.H. James. Jet impingement heat transfer—A literature survey, American Society of Mechanical Engineers, Paper 87, HT-35, 1-11, 1987.
15. K. Jambunathan, E. Lai, M.A. Moss, and B.L. Button. A review of heat transfer data for single circular jet impingement. International Journal of Heat and Fluid Flow 13 (2): 106-115, 1992.
16. R. Viskanta. Heat transfer to impinging isothermal gas and flame jets. Experimental Thermal and Fluid Science 6: 111-134, 1993.
17. D.Z. Ovadia and C.E. Walker. Impingement in food processing. Food Technology 11(6): 1147-1176, 1998.
18. A. Sarkar, N. Nitin, M.V. Karwé, and R.P. Singh. Fluid flow and heat transfer in air jet impingement in food processing. Journal of Food Science 69 (4): 113-122, 2004.
19. E. Olsson. Jet impingement and infrared heating of cylindrical foods. Flow and heat transfer studies. PhD dissertation, Lund University, Lund, Sweden, 2005.
20. H.E. Marcroft, M. Chandrasekaran, and M.V. Karwé. Flow field in a hot air jet impingement oven. Part II: Multiple impinging jets. Journal of Food Processing Preservation 23: 235-248, 1999.
21. S.H. Seyedin, M. Hasan, and A.S. Mujumdar. Turbulent flow and heat transfer from confined multiple impinging slot jets. Numerical Heat Transfer, Part A. Applications 27: 35-51, 1995.
22. Y.-T. Yang and C.-H. Shyu. Numerical study of multiple impinging slot jets with an inclined confinement surface. Numerical Heat Transfer, Part A. Applications 33: 23-37, 1998.
23. P.Y. Tzeng, C.Y. Soong, and C.D. Hsieh. Numerical investigation of heat transfer under confined impinging turbulent slot jets. Numerical Heat Transfer, Part A. Applications 35: 903-924, 1999.
24. E.E.M. Olsson, L.M. Ahrné, and A.C. Trägårdh. Flow and heat transfer from multiple slot air jets impinging on circular cylinders. Journal of Food Engineering 67: 273-280, 2005.
25. J. Baughn and S. Shimizu. Heat transfer measurements from a surface with uniform heat flux and an impinging jet. Journal of Heat Transfer 111: 1096-1098, 1989.
26. X. Yan, J.W. Baughn, and M. Mesbah. The effect of Reynolds number on the heat transfer distribution from a flat plate to an impinging jet. American Society of Mechanical Engineers, Heat Transfer Division (Publication), HTD 226: 1-7, 1992.
27. D. Cooper, D.C. Jackson, B.E. Launder, and G.X. Liau. Impinging jet studies for turbulence model assessment—I. Flow-field experiments. International Journal of Heat and Mass Transfer 36 (10): 2675-2684, 1993.
28. T.J. Craft, L.J.W. Graham, and B.E. Launder. Impinging jet studies for turbulence model assessment—II. An examination of the performance of four turbulence models. International Journal of Heat and Mass Transfer 36 (10): 2685-2697, 1993.
29. J. Lee and S.-J. Lee. Stagnation region heat transfer of a turbulent axisymmetric jet impingement. Experimental Heat Transfer 12 (2): 137-156, 1999.
30. S.H. Kang and R. Greif. Flow and heat transfer to a circular cylinder with a hot impinging air jet. International Journal of Heat and Mass Transfer 35 (9): 2173-2183, 1992.
31. A.A. Tawfek. Heat transfer due to a round jet impinging normal to a circular cylinder. Heat and Mass Transfer 35: 327-333, 1999.
32. C.S. McDaniel and B.W. Webb. Slot jet impinging heat transfer from circular cylinders. International Journal of Heat and Mass Transfer 43: 1975-1985, 2000.
33. F. Gori and L. Bossi. On the cooling effect of an air jet along the surface of a cylinder. International Communications in Heat and Mass Transfer 27 (5): 667-676, 2000.
34. G. Scott and P. Richardson. The application of computational fluid dynamics in the food industry. Trends in Food Science and Technology 8 (4): 119-124, 1997.
35. B. Xia and D.-W. Sun. Applications of computational fluid dynamics (CFD) in the food industry: A review. Computers and Electronics in Agriculture 34: 5-24, 2002.
36. H.K. Versteeg and W. Malalasekera. An Introduction to Computational Fluid Dynamics. The Finite Volume Method. Essex, England: Longman Scientific and Technical, 1995.
37. Fluent 6.0 User’s Guide. Fluent Inc., 2001.
38. M. Angioletti, E. Nino, and G. Ruocco. CFD turbulent modeling of jet impingement and its validation by particle image velocimetry and mass transfer measurements. International Journal of Thermal Science 44: 349-356, 2005.
39. T.L. Chan, C.W. Leung, K. Jambunathan, S. Ashforth-Frost, Y. Zhou, and M.H. Liu. Heat transfer characteristics of a slot jet impinging on a semi-circular convex surface. International Journal of Heat and Mass Transfer 45: 993-1006, 2002.
40. S. Ashforth-Frost, K. Jambunathan, and C.F. Whitney. Velocity and turbulence characteristics of a semiconfined orthogonally impinging slot jet. Experimental Thermal and Fluid Science 14: 60-67, 1997.
41. D.H. Lee, Y.S. Chung, and M.G. Kim. Turbulent flow and heat transfer measurements on a curved surface with a fully developed round impinging jet. International Journal of Heat and Fluid Flow 18: 160-169, 1997.
42. F.R. Menter. Two-equation eddy-viscosity turbulence models for engineering applications. AIAA Journal 32 (8): 1598-1604, 1994.
43. N. Nitin and M.V. Karwé. Heat transfer coefficient for cookie shaped objects in a hot air jet impingement oven. Journal of Food Process Engineering 24: 51-69, 2001.
44. E.E.M. Olsson, L.M. Ahrné, and A.C. Trägårdh. Prediction of optimal heat transfer from slot air jets impinging on cylindrical food products using CFD. In: Proceedings of the 9th International Congress on Engineering and Food (ICEF 9), Montpellier, France, 2004.
45. U. Wahlby and C. Skjöldebrand. Reheating characteristics of crust formed on buns, and crust formation. Journal of Food Engineering 53: 177-184, 2002.
46. V. Soto and R Bórquez. Impingement jet freezing of biomaterials. Food Control 12: 515-522, 2001.
47. D.Z. Ovadia and C.E. Walker. Opportunities for impingement technology in the baking and allied industries. American Institute ofBaking Technology Bulletin 19: 1-8, 1997.
48. A. Li and C.E. Walker. Cake baking in conventional, impingement and hybrid ovens. Journal of Food Science 61 (1): 188-191, 197, 1996.
49. Y. Yin and C.E. Walker. A quality comparison of breads baked by conventional versus nonconven-tional ovens: A review. Journal of the Science of Food and Agriculture 67: 283-291, 1995.