PE-CPE blends and their graphene oxide nanocomposites with reduced low temperature brittleness

Colloid and Polymer Science

Volumn 291, Issue 8, 2013, Pages 1949-1961

  Mittal, Vikas ^a   Matsko, Nadejda ^b  

^a KHALIFA UNIVERSITY   (United Arab Emirates)

^b Graz Centre for Electron Microscopy   (Austria)

Author keywords

Amorphous phase; Chlorinated polyethylene; Flexibility; Graphene oxide; Height corrugation; Miscibility; Nanocomposite; Phase morphology

Indexed keywords

AMORPHOUS PHASE; CHLORINATED POLYETHYLENE; FLEXIBILITY; GRAPHENE OXIDES; HEIGHT CORRUGATION; PHASE MORPHOLOGY;

FILLERS; FRACTURE; NANOCOMPOSITES; POLYETHYLENES; RHEOLOGY; SOLUBILITY; TEMPERATURE;

GRAPHENE;

CHLORINE; GLASS; GRAPHENE OXIDE; NANOCOMPOSITE; POLYCHLOROETHYLENE; POLYETHYLENE; UNCLASSIFIED DRUG;

ARTICLE; ATOMIC FORCE MICROSCOPY; COMPRESSION; CRYSTALLIZATION; FLOW KINETICS; GLASS TRANSITION TEMPERATURE; LOW TEMPERATURE; LOW TEMPERATURE BRITTLENESS; LOW TEMPERATURE FLEXIBILITY; MISCIBILITY; PHASE TRANSITION; PHYSICAL PHENOMENA; PRIORITY JOURNAL; QUANTITATIVE ANALYSIS; VISCOELASTICITY;

EID: 84881168344     PISSN: 0303402X     EISSN: 14351536     Source Type: Journal    
DOI: 10.1007/s00396-013-2938-5     Document Type: Article

References (32)

1. Holden G (1996) Thermoplastic elastomers. Hanser, New York
2. Veenstra H, van Lent BJJ, van Dam J, de Boer AP (1999) Polymer 40:6661
3. Ohlsson B, Hassander H, Tornell B (1996) Polym Eng Sci 36:501
4. Coran AY, Patel R (1980) Rubber Chem Technol 53:141
5. Abdou-Sabet S, Patel RP (1991) Rubber Chem Technol 64:769
6. Jancar J (1999) Mineral fillers in thermoplastics I: raw materials and processing. Springer, Berlin
7. Hippi U (2008) Polyolefin composites. Wiley, New Jersey
8. Zhou L, Wang X, Lin Y, Yang J, Wu Q (2003) J Appl Polym Sci 90:916
9. Eastwood EA, Dadmun MD (2002) Polymer 43:6707
10. He P, Huang H, Xiao W, Huang S, Cheng S (1997) J Appl Polym Sci 64:2535
11. Stoeva S (2006) J Appl Polym Sci 101:2602
12. Waddington S, Briggs D (1991) Polym Commun 32:506
13. Ogoe SA, et al (1996) A blend of polycarbonate and chlorinated polyethylene which has a desirable balance of impact and ignition resistance properties. US patent US5525651
14. Barrie JA, Webb WD (1989) Polymer 30:327
15. Mukhopadhyay P, Gupta RK (2011) Plast Eng 32
16. Kim H, Abdala AA, Macosko CW (2010) Macromolecules 43:6515
17. Rafiee MA, Rafiee J, Wang Z, Song H, Yu ZZ, Koratkar N (2009) ACS Nano 3:3884
18. Nguyen DA, Lee YR, Raghu AV, Jeong HM, Shin CM, Kim BK (2009) Polym Int 58:412
19. Schniepp HC, Li J-L, McAllister MJ, Sai H, Herrera-Alonso M, Adamson DH, Prud'homme RK, Car R, Saville DA, Aksay IA (2006) J Phys Chem B 110:8535
20. Sanchez-Valdes S, Lopez-Quintanilla ML (2006) Adv Sci Technol 45:1399
21. Guffey VO, Sabbagh AB (2002) J Vinyl Addit Technol 8:259
22. Chaudhry AU, Mittal V (2013) Polym Eng Sci 53:78
23. Donskoi AA, Shashkina MA, Zaikov GE (2003) New concepts in polymer science, vol 13. VSP, Utrecht
24. McAllister MJ, Li JL, Adamson DH, Schniepp HC, Abdala AA, Liu J, Herrera-Alonso M, Milius DL, Car R, Prud'homme RK, Aksay IA (2007) Chem Mater 19:4396
25. van Krevelan DW (1990) Properties of polymers. Elsevier, The Netherlands
26. Mittal V, Matsko NB (2013) Polymer (in press)
27. Cho K, Lee BH, Hwang KM, Lee H, Choe S (1998) Polym Eng Sci 38:1969
28. Kwag H, Rana D, Choe K, Rhee J, Woo T, Lee BH, Choe S (2000) Polym Eng Sci 40:1672
29. Joshi M, Butola BS, Simon G, Kukaleva N (2006) Macromolecules 39:1839
30. van Gurp M, Palmen J (1998) Rheol Bull 67:5
31. Chuang HK, Han CD (1984) J Appl Polym Sci 29:2205
32. Han CD, Chuang HK (1985) J Appl Polym Sci 30:4431