Synergistic Effects of Montmorillonite/Cerium Nitrate Additives on the Corrosion Performance of Epoxy-Clay Nanocomposite Coatings

Polymer - Plastics Technology and Engineering

Volumn 52, Issue 10, 2013, Pages 980-990

  Darmiani, Ebrahim ^a   Rashed, Gholam Reza ^a   Zaarei, Davood ^b   Danaee, Iman ^a  

^a PETROLEUM UNIVERSITY OF TECHNOLOGY   (Iran)

^b ISLAMIC AZAD UNIVERSITY   (Iran)

Author keywords

Cerium nitrate; Impedance; Montmorillonite; Nanocomposite; Salt spray

Indexed keywords

ANTI-CORROSIVE PROPERTIES; CERIUM NITRATE; COLD ROLLED STEEL PANELS; CORROSION PERFORMANCE; EPOXY-CLAY NANOCOMPOSITES; NANO-COMPOSITE COATING; POLARIZATION MEASUREMENTS; SALT SPRAY;

ATOMIC FORCE MICROSCOPY; CERIUM; CLAY MINERALS; COATINGS; CORROSION PROTECTION; ELECTRIC IMPEDANCE; ELECTROCHEMICAL IMPEDANCE SPECTROSCOPY; NITRATES; TRANSMISSION ELECTRON MICROSCOPY;

NANOCOMPOSITES;

EID: 84880938071     PISSN: 03602559     EISSN: 15256111     Source Type: Journal    
DOI: 10.1080/03602559.2013.763373     Document Type: Article

References (39)

1. Olad, A.; Azar, R.H.; Babaluo, A.A. Investigation on the mechanical and thermal properties of intercalated epoxy/layered silicate nanocomposites. Int. J. Polym. Mater. 2012, 61, 1035 - 1049.
2. Yanbing, W.; Zhixiong, H.; Ming, D.; Lianmeng, Z. Experimental investigation on the damping behaviors of epoxies with different epoxy value. Polym-Plast. Technol. 2007, 46, 973 - 977.
3. Nigrawal, A.; Chand, N. Studies on dielectric and a.c. conductivity behavior of activated carbon-filled epoxy-graded composites. Polym.-Plast. Technol. 2011, 50, 547 - 551.
4. Kushwaha, P.K.; Kumar, R. Studies on the water absorption of bamboo-epoxy composites: the effect of silane treatment. Polym. -Plast. Technol. 2010, 49, 867 - 873.
5. Alavi Nikje, M.M.; Tehrani, M.Z.; Garmarudi, A.B.; Haghshenas, M. Chemical treatment of silica nanoparticles by diethanolamine and γ-glycidoxypropyltrimethoxysilane and application of modified nanoparticles in epoxy-based composites. Polym.-Plast. Technol. 2009, 48, 891 - 896.
6. Ma, A.; Chen, W.; Hou, Y. Enhanced thermal conductivity of epoxy composites with MWCNTs/AlN hybrid filler. Polym.-Plast. Technol. 2012, 51, 1578 - 1582.
7. Chen, W.S.; Chang, Y.L.; Hsiang, H.I.; Hsu, F.C.; Shen, Y.H.; Yen, F.S. Mechanical and dielectric properties of NiZn ferrite powders-CTBN modified epoxy resin coatings. Polym.-Plast. Technol. 2011, 50, 568 - 572.
8. Tan, S.G.; Chow, W.S. Thermal properties, fracture toughness and water absorption of epoxy-palm oil blends. Polym.-Plast. Technol. 2010, 49, 900 - 907.
9. Nigrawal, A.; Chand, N. Studies on dielectric and a.c. conductivity behavior of activated carbon-filled epoxy-graded composites. Polym.-Plast. Technol. 2011, 50, 547 - 551.
10. Zaarei, D.; Sarabi, A.A.; Sharif, F.; Moazzami Gudarzi, M.; Kassiriha, S.M. A new approach to using submicron emeraldine-base polyaniline in corrosion-resistant epoxy coatings. Coat. Technol. Res. 2012, 9, 47 - 57.
11. Yasmin, A.; Daniel, I.M. Mechanical and thermal properties of graphite platelet/epoxy composites. Polymer. 2004, 45, 8211 - 8219.
12. Estevez, M.; Vargas, S.; Castaño, V.; Rodríguez, R.; Rodríguez, V. Hybrid ceramic-polymer coating used to protect metallic surfaces against corrosion. Int. J. Polym. Mater. 2003, 52, 845 - 859.
13. Markin, V.S.; Zaikov, G.E. Concerning the diffusion model of the protective action of admixtures in polymeric coatings. Int. J. Polym. Mater. 1994, 25, 49 - 57.
14. Sukhareva, L.A.; Balavintseva, E.K.; Menkova, T.I.V.M. Prostyakov, V.M. The effect of mesomorphic modifiers on the mechanical and protective properties of epoxy composite systems. Int. J. Polym. Mater. 1995, 28, 19 - 22.
15. Olad, A.; Azar, R.H.; Babaluo, A.A. Investigation on the mechanical and thermal properties of intercalated epoxy/layered silicate nanocomposites. Int. J. Polym. Mater. 2012, 61, 1035 - 1049.
16. Mir, I.A.; Kumar, D. Development of polyaniline/epoxy composite as a prospective solder replacement material. Int. J. Polym. Mater. 2010, 59, 994 - 1007.
17. Özyi{dotless}lmaz, A.T. Polyaniline top coat modified on nickel-plated mild steel: AC impedance analyzer. Int. J. Polym. Mater. 2006, 45, 285 - 291.
18. Nithianamdam, V.S.; Reddy, T.A.; Erhan, S. Diamine-quinone polymers as effective anticorrosive coatings. Int. J. Polym. Mater. 1994, 23, 167 - 175.
19. Lim, S.R.; Chow, W.S. Fracture toughness enhancement of epoxy by organo-montmorillonite. Polym-Plast. Technol. 2011, 50, 182 - 189.
20. Moura, M.R.; Aouada, F.A.; Zucolotto, V.; Mattoso, L.H.C. Barrier and mechanical properties of clay-reinforced polymeric nanocomposites. Polym.-Plast. Technol. 2011, 50, 1323 - 1328.
21. Abu-Zahra, N.H.; Alian, A.M. Density and cell morphology of rigid foam PVC-clay nanocomposites. Polym.-Plast. Technol. 2010, 49, 237 - 243.
22. Thiagarajan, A.; Palaniradja, K.; Mathivanan, N.R. Effect of nanoclay on the impact properties of glass fiber-reinforced polymer composites. Polym.-Plast. Technol. 2012, 51, 1403 - 1410.
23. Ashhari, S.; Sarabi, A.A.; Kasiriha, S.M.; Zaarei, D. Aliphatic polyurethane-montmorillonite nanocomposite coatings: Preparation, characterization, and anticorrosive properties. Appl. Polym. Sci. 2011, 119, 523 - 529.
24. Bagherzadeh, M.R.; Mahdavi, F. Preparation of epoxy-clay nanocomposite and investigation on its anti-corrosive behavior in epoxy coating. Prog. Org. Coat. 2007, 60, 117 - 120.
25. Heidariana, M.; Shishesaza, M.R.; Kassiriha, S.M.; Nematollahia, M. Characterization of structure and corrosion resistivity of polyurethane/organoclay nanocomposite coatings prepared through an ultrasonication assisted process. Prog. Org. Coat. 2010, 68, 180 - 188.
26. Nematollahi, M.; Heidarian, M.; Peikari, M.; Kassiriha, S.M.; Arianpouya, N.; Esmaeilpour, M. Comparison between the effect of nanoglass flake and montmorillonite organoclay on corrosion performance of epoxy coating. Corros. Sci. 2010, 52, 1809-1817.
27. Liu, W.; Hoa, S.V.; Pugh, M. Water uptake of epoxy-clay nanocomposites: Model development. Compos. Sci. Technol. 2007, 67, 3308 - 3315.
28. Pavlidou, S.; Papaspyrides, C.D. A review on polymer-layered silicate nanocomposites. Prog. Polym. Sci. 2008, 33, 1119 - 1198.
29. Wetzela, B.; Hauperta, F.; Qiu Zhang, M. Epoxy nanocomposites with high mechanical and tribological performance. Compos. Sci. Technol. 2003, 63, 2055 - 2067.
30. Yeh, J.M.; Huang, H.Y.; Chen, C.L.; Su, W.F.; Yu, Y.H. Surf: Siloxane-modified epoxy resin-clay nanocomposite coatings with advanced anticorrosive properties prepared by a solution dispersion approach. Coat. Technol. 2006, 200, 2753 - 2763.
31. Montemor, M.F.; Simões, A.M.; Ferreira, M.G.S. Composition and behaviour of cerium films on galvanised steel. Prog. Org. Coat. 2001, 43, 274 - 281.
32. 3. Corros. Sci. 2006, 48, 3740 - 3758.
33. Lim, S.R.; Chow, W.S. Fracture Toughness Enhancement of Epoxy by Organo-Montmorillonite. Polym. Plast. Technol. Eng. 2011, 50, 182 - 189.
34. Zaarei, D.; Sarabi, A.A.; Sharif, F.; Moazzami Gudarzi, M.; Kassiriha, S.M. Using of p-phenylenediamine as modifier of montmorrilonite for preparation of epoxy-clay nanocomposites: Morphology and solvent resistance properties. Polym. Plast. Technol. Eng. 2010, 49, 285 - 291.
35. Kalendova, A.; Kalenda, P.; Vesely, D. Comparison of the efficiency of inorganic nonmetal pigments with zinc powder in anticorrosion paints. Prog. Org. Coat. 2006, 57, 1 - 10.
36. Litchfield, D.W.; Baird, D.G. The role of nanoclay in the generation of poly(ethylene terephthalate) fibers with improved modulus and tenacity. Polymer. 2008, 49, 5027 - 5036.
37. Buchheit, R.G.; Mamidipally, S.B.; Schmutz, P.; Guan, H. Active corrosion protection in Ce-modified hydrotalcite conversion coatings. Corros. Sci. 2002, 58, 3 - 14.
38. Montemor, M.F.; Simões, A.M.; Ferreira, M.G.S. Composition and behaviour of cerium films on galvanised steel. Prog. Org. Coat. 2001, 43, 274 - 281.
39. Sun, L.; Boo, W.J.; Clearfield, A. Barrier properties of model epoxy nanocomposites. Membr. Sci. 2008, 318, 129 - 136.