Optimal PI-control and verification of the SIMC tuning rule

IFAC Proceedings Volumes (IFAC-PapersOnline)

Volumn 2, Issue PART 1, 2012, Pages 11-22

  Grimholt, Chriss ^a   Skogestad, Sigurd ^a  

^a NORWEGIAN UNIVERSITY OF SCIENCE AND TECHNOLOGY   (Norway)

Author keywords

Closed loop model approximation; Optimality; Pareto optimal; Performance evaluation; PI controllers; Robustness

Indexed keywords

CONTROLLERS; PARETO PRINCIPLE; PROPORTIONAL CONTROL SYSTEMS; ROBUST CONTROL; ROBUSTNESS (CONTROL SYSTEMS); THREE TERM CONTROL SYSTEMS; TIME DELAY;

CLOSED LOOP MODELS; OPTIMALITY; PARETO-OPTIMAL; PERFORMANCE EVALUATION; PI CONTROLLER;

DELAY CONTROL SYSTEMS;

EID: 84880856219     PISSN: 14746670     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.3182/20120328-3-it-3014.00003     Document Type: Conference Paper

References (15)

1. Alcantara, S., C. Pedret and R. Vilanova (2010). On the model matching approach to PID design: Analytical perspective for robust servo/regulator tradeoff tuning. J. Process Control 20, 596-608.
2. Astrom, K.J. and T. Hagglund (1995). PID controllers: Theory, design and tuning. 2nd ed. ISA-Instrument Society of America.
3. Di Ruscio, D. (2010). On Tuning PI Controllers for Integrating Plus Time Delay Systems. Modeling, Identification and Control 31(4), 145-164.
4. Foley, M.W., N.R Ramharack and B.R Copeland (2005). Comparison of PI controller tuning methods. Ind. Eng. Chem. Res. 44(17), 6741-6750.
5. Grimholt, C. (2010). Verification and improvements of the SIMC method for PI control. Technical report. 5th year project. Department of Chemical Engineering. Norwegian University of Science and Technology, Trondheim. http://www.nt.ntnu.no/users/skoge/diplom/prosjekt10/grimholt.
6. Haugen, F. (2010). Comparing PI tuning methods in a real benchmark temperature control system. Modeling, Identifiation and Control 31, 79-91.
7. Rivera, D.E., M. Morari and S. Skogestad (1986). Internal model control. 4. PID controller design. Ind. Eng. Chem. Res. 25(1), 252-265.
8. Seborg, D.E., T.F. Edgar and D.A. Mellichamp (1989). Process Dynamics and Control. John Wiley & Sons.
9. Shamsuzzoha, M. and S. Skogestad (2010). The setpoint overshoot method: A simple and fast method for closed-loop PID tuning. J. Process Control 20, 1220-1234.
10. Skogestad, S. (2003). Simple analytic rules for model reduction and PID controller tuning. J. Process Control 13, 291-309.
11. Skogestad, S. (2006). Tuning for smooth PID control with acceptable disturbance rejection. Ind. Eng. Chem. Res. 45, 7817-7822.
12. Smith, O.J. (1957). Closer control of loops with dead time. Chem. Eng. Prog. 53, 217.
13. Tyreus, B.D. and W.L. Luyben (1992). Tuning PI controllers for integrator/dead time processes. Ind. Eng. Chem. Res. pp. 2628-2631.
14. Yuwana, M. and D.E. Seborg (1982). A new method for on-line controller tuning. AIChE Journal 28, 434-440.
15. Ziegler, J.G. and N.B. Nichols (1942). Optimum settings for automatic controllers. Trans. of the A.S.M.E. 64, 759-768.