1,3-butadiene as an adhesion promoter between composite resin and dental ceramic in a dielectric barrier discharge jet

Plasma Chemistry and Plasma Processing

Volumn 33, Issue 2, 2013, Pages 539-551

  Han, Geum Jun ^a   Chung, Sung No ^b   Chun, Bae Hyeock ^b   Kim, Chang Keun ^c   Oh, Kyu Hwan ^a   Cho, Byeong Hoon ^a  

^a Seoul National University   (South Korea)

^b NBT Ltd   (South Korea)

^c Chung Ang University   (South Korea)

Author keywords

Dental ceramic adhesion; Dielectric barrier discharge (DBD) jet; Plasma enhanced chemical vapor deposition; Precursor monomer; Surface characterization

Indexed keywords

CARBON-CARBON DOUBLE BONDS; DENTAL CERAMIC; DIELECTRIC BARRIER DISCHARGES; FOCUSED ION BEAM TECHNIQUE; POSITIVE CONTROL GROUP; PRECURSOR MONOMER; SHEAR BOND STRENGTHS; SURFACE CHARACTERIZATION;

BUTADIENE; CERAMIC MATERIALS; DENTAL MATERIALS; DEPOSITION; DIELECTRIC DEVICES; ESTERIFICATION; ESTERS; ETHERS; FLOW CONTROL; FLOW RATE; MONOMERS; PLASMA DEPOSITION; PLASMA ENHANCED CHEMICAL VAPOR DEPOSITION; PLASMAS; POLYMERS; RESINS; SURFACE PROPERTIES;

ADHESION;

EID: 84879685078     PISSN: 02724324     EISSN: None     Source Type: Journal    
DOI: 10.1007/s11090-013-9437-9     Document Type: Article

References (26)

1. Laroussi M (1996) Sterilization of contaminated matter with an atmospheric pressure plasma. IEEE Trans Plasma Sci 24:1188-1191
2. Fridman G, Friedman G, Gutsol A, Shekhter AB, Vasilets VN, Fridman A (2008) Applied plasma medicine. Plasma Process Polym 5:503-533
3. Kong MG, Kroesen G, Morfill G, Nosenko T, Shimizu T, van Dijk J, Zimmermann JL (2009) Plasma medicine: an introductory review. New J Phys 11:115012
4. Lloyd G, Friedman G, Jafri S, Schults G, Fridman A, Harding K (2010) Gas plasma: medical uses and developments in wound care. Plasma Process Polym 7:194-211
5. Lee HW, Park GY, Seo YS, Im YH, Shim SB, Lee HJ (2011) Modelling of atmospheric pressure plasmas for biomedical applications. J Phys D Appl Phys 44:053001
6. Sladek REJ, Stoffels E, Walraven R, Tielbeek PJA, Koolhoven RA (2004) Plasma treatment of dental cavities: a feasibility study. IEEE Trans Plasma Sci 32:1540-1543
7. Jiang C, Vernier PT, Chen MT, Wu YH, Wang LL, Gundersen MA (2008) Low energy nanosecond pulsed plasma sterilization for endodontic applications. Proc IEEE Int Power Modul High Volt Conf 7:77-79
8. Lee HW, Kim GJ, Kim JM, Park JK, Lee JK, Kim GC (2009) Tooth bleaching with nonthermal atmospheric pressure plasma. J Endod 35:587-591
9. Ritts AC, Li H, Yu Q, Xu C, Yao X, Hong L, Wang Y (2010) Dentin surface treatment using a non-thermal argon plasma brush for interfacial bonding improvement in composite restoration. Eur J Oral Sci 118:510-516
10. Rupf S, Lehmann A, Hanning M, SchÄfer B, Schubert A, Feldmann U, Schindler A (2010) Killing of adherent oral microbes by a non-thermal atmospheric plasma jet. J Med Microbiol 59:206-212
11. Cho BH, Han GJ, Oh KH, Chung SN, Chun BH (2011) The effect of plasma polymer coating using atmospheric-pressure glow discharge on the shear bond strength of composite resin to ceramic. J Mater Sci 46:2755-2763
12. Han GJ, Chung SN, Chun BH, Kim CK, Oh KH, Cho BH (2012) The effect of the applied power of atmospheric pressure plasma on the adhesion of composite resin to dental ceramic. J Adhes Dent 14:461-469
13. Chirokov A, Gutsol A, Fridman A (2005) Atmospheric pressure plasma of dielectric barrier discharges. Pure Appl Chem 77:487-495
14. Tsai TC, Staack D (2011) Low-temperature polymer deposition in ambient air using a floating-electrode dielectric barrier discharge jet. Plasma Process Polym 8:523-534
15. Walsh JL, Shi JJ, Kong MG (2006) Contrasting characteristics of pulsed and sinusoidal cold atmospheric plasma jets. Appl Phys Lett 88:171501
16. Leroux F, Campagne C, Perwuelz A, Gengembre L (2008) Polypropylene film chemical and physical modifications by dielectric barrier discharge plasma treatment at atmospheric pressure. J Colloid Interface Sci 328:412-420
17. Fang Z, Yang H, Qiu Y (2010) Surface treatment of polyethylene terephthalate films using a microsecond pulse homogeneous dielectric barrier discharges in atmospheric air. IEEE Trans Plasma Sci 38:1615-1623
18. Nwankire CE, Law VJ, Nindrayog A, Twomey B, Niemi K, Milosavljević V, Graham WG, Dowling DP (2010) Electrical, thermal and optical diagnostics of an atmospheric plasma jet system. Plasma Chem Plasma Process 30:537-552
19. 5FeSi in hypoeutectic Al-Si foundry alloys. Metall Mater Trans A 39:2435-2448
20. Sharma AK, Millich F, Hellmuth EW (1978) Adhesion and hydrophilicity of glow-discharge-polymerized propylene coatings. J Appl Phys 49:5055-5059
21. Chen GS, Chen CN, Tseng TT, Wei MH, Hsieh JH, Tseng WJ (2011) Synthesis, characterization, and antibacterial activity of silver-doped silica nanocomposite particles. J Nanosci Nanotechnol 11:90-97
22. Clark DT, Thomas HR (1978) Applications of ESCA to polymer chemistry. XVII. Systemic investigation of the core levels of simple homopolymers. J Polym Sci Polym Chem Ed 16:791-820
23. Moon HJ, Shin DH (2012) Effect of CQ-amine ratio on the degree of conversion in resin monomers with binary and tertiary photoinitiation systems. Restor Dent Endod 37:96-102
24. Park HJ, Son SA, Hur B, Kim HC, Kwon YH, Park JK (2011) Effect of the difference in spectral outputs of the single and dual-peak LEDs on the microhardness and the color stability of resin composites. J Korean Acad Conserv Dent 36:108-118
25. Kim JS, Choi YH, Cho BH, Son HH, Lee IB, Um CM, Kim CK (2006) Effect of light-cure time of adhesive resin on the thickness of the oxygen-inhibited layer and the microtensile bond strength to dentin. J Biomed Mater Res Part B Appl Biomater 78B:115-123
26. Chan CM (1994) Polymer surface modification and characterization. Hanser, Munich, pp 117-122