Design of a hybrid busbar filter combining a transmission-line busbar filter and a one-turn inductor for DC-Fed three-phase motor drive systems

IEEE Transactions on Power Electronics

Volumn 28, Issue 12, 2013, Pages 5588-5602

  Luo, Fang ^a   Baisden, Andrew Carson ^b   Boroyevich, Dushan ^a   Ngo, Khai D T ^a   Wang, Shuo ^c   Mattavelli, Paolo ^a  

^a VIRGINIA POLYTECHNIC INSTITUTE AND STATE UNIVERSITY   (United States)

^b JOHNS HOPKINS UNIVERSITY   (United States)

^c The University of Texas at San Antonio   (United States)

Author keywords

Impedance mismatching; one turn inductor; transmission line electromagnetic interference (EMI) filter

Indexed keywords

ELECTROMAGNETIC INTERFERENCE FILTERS; MOTOR DRIVE SYSTEM; ONE-TURN INDUCTOR; POWER ELECTRONICS SYSTEMS; POWER INTERCONNECTIONS; SYSTEMATIC STUDY; THREE PHASE MOTOR; TRANSMISSION-LINE;

ELECTRIC INDUCTORS; ELECTRIC LINES; ELECTRIC MOTORS; ELECTROMAGNETIC PULSE; ELECTROMAGNETIC WAVE INTERFERENCE; SIGNAL INTERFERENCE;

BUSBARS;

EID: 84879108825     PISSN: 08858993     EISSN: None     Source Type: Journal    
DOI: 10.1109/TPEL.2013.2244913     Document Type: Article

References (41)

1. R. M. Cuzner, "Impacts to the power density of ship electric drives, " IEEE Power Electron. Soc. Newslett., vol. 16, no. 3, pp. 10-12, 2004.
2. L. Fang, R. Robutel, W. Shuo, F. Wang, and D. Boroyevich, "Integrated input EMI filter for a 2 kW DC-fed 3-phase motor drive, " in Proc. Appl. Power Electron. Conf. Expo., 2009, pp. 325-329.
3. J. D. Van Wyk, Jr., W. A. Cronje, J. D. van Wyk, C. K. Campbell, and P. J. Wolmarans, "Power electronic interconnects: skin-and proximityeffect-based frequency selective-multipath propagation, " IEEE Trans. Power Electron., vol. 20, no. 3, pp. 600-610, May 2005.
4. P. J. Wolmarans, J. D. van Wyk, J. D. van Wyk, Jr., and C. K. Campbell, "Technology for integrated RF-EMI transmission line filters for integrated power electronic modules, " in Proc. IEEE Ind. Appl. Conf., Oct. 2002, vol. 3, pp. 1774-1780.
5. L. Zhao, R. Chen, and J. D. van Wyk, "An integrated common mode and differential mode transmission line RF-EMI filter, " in Proc. IEEE Power Electron. Spec. Conf., Jun. 2004, vol. 6, pp. 4522-4526.
6. R. Chen, Y. Liang, and J. D. Van Wyk, "Integrated transmission line EMI filter, " in Proc. 4th Int. Conf. Integr. Power Syst., 2006, pp. 1-6.
7. C. K. Campbell, J. D. van Wyk, and P. J. Wolmarans, "Improved transmission-line attenuators for integrated power filters in the RF band, " IEEE Trans. Compon. Packag. Technol., vol. 27, no. 2, pp. 311-316, Jun. 2004.
8. M. C. Smit, J. A. Ferreira, and J. D. Van Wyk, "Application of transmission line principles to high frequency power converters, " in Proc. IEEE Power Electron. Spec. Conf., Jun. /Jul. 1992, vol. 2, pp. 1423-1430.
9. L. Zhao and J. D. van Wyk, "Electromagnetic modeling of an integrated RF EMI filter, " in Proc. IEEE Ind. Appl. Conf., Oct. 2003, vol. 3, pp. 1601-1607.
10. A. C. Baisden, D. Boroyevich, and J. D. van Wyk, "Impedance interaction and EMI attenuation in converters with an integrated transmissionline filter, " in Proc. IEEE Appl. Power Electron. Conf., Feb. /Mar. 2007, pp. 1203-1208.
11. A. C. Baisden, D. Boroyevich, and J. D. van Wyk, "Enhanced design of an integrated transmission-line bus filter, " in Proc. IEEE Power Electron. Spec. Conf., Jun. 2007, pp. 3029-3033.
12. A. C. Baisden, D. Boroyevich, and J. D. van Wyk, "High frequency modeling of a converter with an RF-EMI filter, " in Proc. IEEE Ind. Appl. Conf., Oct. 2006, vol. 5, pp. 2290-2295.
13. L. Fang, A. C. Baisden, D. Boroyevich, N. Khai, F. Wang, P. Mattavelli, L. Coppola, N. Gazel, and K. Yong, "An improved design for transmission line busbar EMI filter, " in Proc. IEEE Energy Convers. Congr. Expo., Sep. 2010, pp. 1232-1238.
14. Y. Liang, R. Chen, and J. D. van Wyk, "Large signal dielectric characterization for integrated electromagnetic power passives, " in Proc. IEEE Appl. Power Electron. Conf. Expo., Mar. 2005, pp. 979-985.
15. Y. Liang, J. D. van Wyk, and K. Ngo, "Parametric characterization of differential-mode transmission line EMI filter, " in Proc. IEEE Appl. Power Electron. Conf., Feb.-Mar. 2007, pp. 1217-1223.
16. M. Hartmann, H. Ertl, and J. W. Kolar, "EMI filter design for a 1 MHz, 10 kW Three-Phase/Level PWM rectifier, " IEEE Trans. Power Electron., vol. 26, no. 4, pp. 1192-1204, Apr. 2011.
17. X. Wu, D. Xu, Z. Wen, Y. Okuma, and K. Mino, "Design, modeling, and improvement of integrated EMI filter with flexible multilayer foils, " IEEE Trans. Power Electron., vol. 26, no. 5, pp. 1344-1354, May 2011.
18. Requirements for the Control of Electromagnetic Interference Characteristics of Subsystems and Equipment, Department of Defense Interference Standard, MIL-STD-461F, Dec. 2007.
19. S. Xing and Z. Wu, "Characteristic research of bearing currents in invertermotor drive systems, " in Proc. IEEE Power Electron. Motion Control Conf., Aug. 2006, pp. 1-4.
20. J. M. Erdman, R. J. Kerkman, D. W. Schlegel, andG. L. Skibinski, "Effect ofPWMinverters on ACmotor bearing currents and shaft voltages, " IEEE Trans. Ind. Appl., vol. 32, no. 2, pp. 250-259, Mar. /Apr. 1996.
21. L. Fang, D. Boroyevich, P. Mattavelli, and X. Zhang, "On discussion of switching frequency impacts on DC-fed motor drive EMI filter design, " in Proc. IEEE Appl. Power Electron. Conf. Expo., Feb. 2012, pp. 623-627.
22. L. Fang, Z. Xuning, D. Boroyevich, P. Mattevelli, X. Jing, F. Wang, and N. Gazel, "On discussion of AC and DC side EMI filters design for conducted noise suppression in DC-fed three phase motor drive system, " in Proc. IEEE Appl. Power Electron. Conf. Expo., Mar. 2011, pp. 667-672.
23. S. Wang, F. C. Lee, and W. G. Odendaal, "Characterization, evaluation, and design of noise Separator for conducted EMI noise diagnosis, " IEEE Trans. Power Electron., vol. 20, no. 4, pp. 974-982, Jul. 2005.
24. S. Wang, L. Fang, and F. C. Lee, "Characterization and design of threephase EMI noise separators for three-phase power electronics systems, " IEEE Trans. Power Electron., vol. 26, no. 9, pp. 2426-2438, Sep. 2011.
25. J. Stahl, D. Kuebrich, A. Bucher, and Duerbaum, "Characterization of a modified LISN for effective separated measurements of common mode and differential mode EMI noise, " in Proc. IEEE Energy Convers. Congr. Expo., Sep. 2010, pp. 935-941.
26. P. C. Magnusson, G. C. Alexander, andV. K. Tripathi, Transmission Lines andWave Propagation, 3rd ed. Boca Raton, FL, USA: CRC Press, 1992.
27. J. Jiguang, Circuit Theory (Part II). Beijing, China: Tsinghua Univ. Press, 1996.
28. L. Fang, D. Boroyevich, P. Mattevelli, and N. Gazel, "A comprehensive design for high power density common mode EMI inductor, " in Proc. IEEE Energy Convers. Congr. Expo., Sep. 2011, pp. 1861-1867.
29. J. Dong, L. Rixin, W. Fei, L. Fang, W. Shuo, and D. Boroyevich, "Study of conducted EMI reduction for three-phase active front-end rectifier, " IEEE Trans. Power Electron., vol. 26, no. 12, pp. 3823-3831, Dec. 2011.
30. L. Fang, W. Shuo, F. Wang, D. Boroyevich, N. Gazel, and K. Yong, "Common mode voltage in DC-fed motor drive system and its impact on the EMI filter, " in Proc. IEEE Appl. Power Electron. Conf. Expo., Feb. 2010, pp. 1272-1278.
31. L. Fang, W. Shuo, W. Fei, D. Boroyevich, N. Gazel, K. Yong, and A. C. Baisden, "Analysis of CMvolt-second influence onCMinductor saturation and design for input EMI filters in three-phase DC-fed motor drive systems, " IEEE Trans. Power Electron., vol. 25, no. 7, pp. 1905-1914, Jul. 2010.
32. A. M. Hava and E. Un, "Performance analysis of reduced common-mode voltage PWM methods and comparison with standard PWM methods for three-phase voltage-source inverters, " IEEE Trans. Power Electron., vol. 24, no. 1, pp. 241-252, Jan. 2009.
33. L. Ran, S. Gokani, J. Clare, K. J. Bradley, and C. Christopoulos, "Conducted electromagnetic emissions in induction motor drive systems. II. Frequency domain models, " IEEE Trans. Power Electron., vol. 13, no. 4, pp. 768-776, Jul. 1998.
34. H. Akagi and T. Oe, "A specific filter for eliminating high-frequency leakage current from the grounded heat sink in a motor drive with an active front end, " IEEE Trans. Power Electron., vol. 23, no. 2, pp. 763-770, Mar. 2008.
35. L. Fang, D. Boroyevich, and P. Mattavelli, "Improving EMI filter design with in circuit impedance mismatching, " in Proc. IEEE Appl. Power Electron. Conf. Expo., Feb. 2012, pp. 1652-1658.
36. Z. Xuning, L. Fang, D. Dong, P. Mattavelli, and D. Boroyevich, "CM noise containment in a DC-fed motor drive system using DM filter, " in Proc. IEEE Appl. Power Electron. Conf. Expo., Feb. 2012, pp. 1808-1813.
37. L. W. Li, M. S. Leong, P. S. Kooi, and T. S. Yeo, "Mutual impedance of two probes located in two different waveguide regions separated by a homogeneous dielectric slab: Fullwave analysis, " IEE Proc. Microw., Antennas Propag., vol. 144, no. 5, pp. 329-336, Oct. 1997.
38. L. Qian, S. Wang, A. C. Baisden, F. Wang, and D. Boroyevich, "EMI suppression in voltage source converters by utilizing dc-link decoupling capacitors, " IEEE Trans. Power Electron., vol. 22, no. 4, pp. 1417-1428, Jul. 2007.
39. L. Xing and J. Sun, "Conducted common-mode EMI reduction by impedance balancing, " IEEE Trans. Power Electron., vol. 27, no. 3, pp. 1084-1089, Mar. 2012.
40. S. Wang, Y. Y. Maillet, F. Wang, R. Lai, F. Luo, and D. Boroyevich, "Parasitic effects of grounding paths on common-modeEMIfilter's performance in power electronics systems, " IEEE Trans. Ind. Electron., vol. 57, no. 9, pp. 3050-3059, Sep. 2010.
41. A. Virtanen, "Comparison of common-mode voltages in frequency converters with alternative space vector modulation methods, " in Proc. IEEE Power Electron. Spec. Conf., Jun. 2008, pp. 2248-2256.