An advanced power electronics interface for electric vehicles applications

IEEE Transactions on Power Electronics

Volumn 28, Issue 12, 2013, Pages 5508-5521

  Hegazy, Omar ^a   Barrero, Ricardo ^a   Van Mierlo, Joeri ^a   Lataire, Philippe ^a   Omar, Noshin ^a   Coosemans, Thierry ^a  

^a VRIJE UNIVERSITEIT BRUSSEL   (Belgium)

Author keywords

Battery electric vehicles (BEVs); Interleaved dc dc converter; On board battery charger; Powertrain control strategies; Powertrain modeling; Small signal model

Indexed keywords

BATTERY ELECTRIC VEHICLES; CONTROL STRATEGIES; ON-BOARD BATTERIES; POWERTRAIN MODELING; SMALL SIGNAL MODEL;

CHARGING (BATTERIES); DC-DC CONVERTERS; ELECTRIC VEHICLES; ELECTROMAGNETIC PULSE; POWERTRAINS; TOPOLOGY;

POWER ELECTRONICS;

EID: 84879086273     PISSN: 08858993     EISSN: None     Source Type: Journal    
DOI: 10.1109/TPEL.2013.2256469     Document Type: Article

References (36)

1. C. C. Chan, A. Bouscayrol, and K. Chen, "Electric, hybrid, and fuel-cell vehicles: Architectures and modeling," IEEE Trans. Veh. Technol., vol. 59, no. 2, pp. 589-598, Feb. 2010.
2. C. C. Chan, "The state of the art of electric and hybrid, and fuel cell vehicles," Proc. IEEE, vol. 95, no. 4, pp. 704-718, Apr. 2007.
3. A. Emadi, S. S. Williamson, and A. Khaligh, "Power electronics intensive solutions for advanced electric, hybrid electric, and fuel cell vehicular power systems," IEEE Trans. Power Electron., vol. 21, no. 3, pp. 567-577, May 2006.
4. A. Emadi, Y. J. Lee, and K. Rajashekara, "Power electronics and motor drives in electric, hybrid electric, and plug-in hybrid electric vehicles," IEEE Trans. Ind. Electron, vol. 55, no. 6, pp. 2237-2245, Jun. 2008.
5. S. S. Raghavan, O. C. Onar, and A. Khaligh, "Power electronic interfaces for future plug-in transportation systems," IEEE Power Electron. Soc. Newsletter, vol. 23, Third Quarter 2010.
6. Y.-J. Lee, A. Khaligh, and A. Emadi, "Advanced integrated bidirectional AC-DC and DC-DC converter for plug-in hybrid electric vehicles," IEEE Trans. Veh. Technol., vol. 58, no. 8, pp. 3970-3980, Oct. 2009.
7. M. Pahlevaninezhad, P. Das, J. Drobnik, P. K. Jain, and A. Bakhshai, "A new control approach based on the differential flatness theory for an AC/DC converter used in electric vehicles," IEEE Trans. Power Electron., vol. 27, no. 4, pp. 2085-2103, Apr. 2012.
8. Z-Source Inverter for Fuel Cell Vehicles, Oak Ridge Nat. Lab., Oak Ridge, TN, USA, Sep. 2005.
9. S. Miaosen, "Z-source inverter design, analysis, and its application in fuel cell vehicles," Ph.D. dissertation, Michigan State Univ., East Lansing, USA, 2007.
10. M.-K. Nguyen, Y.-C. Lim, and G.-B. Cho, "Switched-inductor quasi-Zsource inverter," IEEE Trans. Power Electron., vol. 26, no. 11, pp. 3183-3191, Nov. 2011.
11. W. Kramer, S. Chakraborty, B. Kroposki, and H. Thomas, "Advanced power electronic interfaces for distributed energy systems, Part 1: Systems and topologies," National Renewable Energy Lab., Golden, CO, USA, Tech. Rep. F4, Nov. 2008.
12. O. Hegazy, J. Van Mierlo, and P. Lataire, "Control and analysis of an integrated bidirectional DC/AC and DC/DC converters for plug-in hybrid electric vehicle applications," J. Power Electron., vol. 11, no. 4, pp. 408-417, 2011.
13. B. Gu, J.-S. Lai, N. Kees, and C. Zheng, "Hybrid-switching full-bridge DC-DC converter with minimal voltage stress of bridge rectifier, reduced circulating losses, and filter requirement for electric vehicle battery chargers," IEEE Trans. Power Electron., vol. 28, no. 3, pp. 1132-1144, Mar. 2013.
14. M. C. Kisacikoglu, B. Ozpineci, and L. M. Tolbert, "Examination of a PHEV bidirectional charger system for V2G reactive power compensation," presented at the Appl. Power Electron. Conf. Expo., Palm Springs, CA, USA, 2010.
15. S. Lacroix, E. Laboure, and M. Hilairet, "An integrated fast battery charger for electric vehicle," presented at the IEEE Veh. Power Propulsion Conf., Lille, France, 2010.
16. S. Haghbin, K. Khan, S. Lundmark, M. Alakula, O. Carlson, M. Leksell, and O. Wallmark, "Integrated chargers for EVs and PHEVs: Examples and new solutions," presented at the IEEE Int. Conf. Elect. Mach., Rome, Italy, Sep. 6-8, 2010.
17. O. Hegazy, J. Van Mierlo, and P. Lataire, "Analysis, control and comparison of DC/DC boost converter topologies for fuel cell hybrid electric vehicle applications," presented at the IEEE Eur. Conf. Power Electron. Appl., Birmingham, U.K., Aug. 30-Sep. 1, 2011.
18. S. Kim and S. S. Williamson, "Modeling, design, and control of a fuel cell/battery/ultra-capacitor electric vehicle energy storage system," presented at the Veh. Power Propulsion Conf., Lille, France, 2010.
19. O. Hegazy, J. Van Mierlo, and P. Lataire, "Analysis, modeling, and implementation of a multidevice interleaved DC/DC converter for fuel cell hybrid electric vehicles," IEEE Trans. Power Electron., vol. 27, no. 11, pp. 4445-4458, Nov. 2012.
20. J. Van Mierlo, G. Magatto, and P. Van den Bossche, "Models of energy sources for EV and HEV: Fuel cells, batteries, ultra-capacitors, flywheels and engine-generators," J. Power Sources, vol. 28, no. 28, pp. 76-89, 2004.
21. O. Hegazy and J. Van Mierlo, "Optimal powermanagement and powertrain components sizing of fuel cell/battery hybrid electric vehicles based on particle swarm optimization," Int. J. Vehicle Design., vol. 58, no. 2/3/4, pp. 200-222, Jul. 2012.
22. A. M. A. Amin, M. I. ElKorfally, A. A. Sayed, and O. Hegazy, "Efficiency optimization of two asymmetrical windings induction motor based on swarm intelligence," IEEE Trans. Energy Convers., vol. 24, no. 1, pp. 12-20, Mar. 2009.
23. K. Aissa and K. D. Eddine, "Vector control using series iron loss model of induction, motors and power loss minimization," World Acad. Sci., Eng. Technol., vol. 52, pp. 142-148, 2009.
24. A. Abo-Khalil, H.-G. Park, and D.-C. Lee, "Loss minimization control for doubly-fed induction generators in variable speed wind turbines," presented at the 33rd Annu. Conf. IEEE Ind. Electron. Soc., Taipei, Taiwan, Nov. 5-8, 2007.
25. D. H. Kim, "GA-PSO based vector control of indirect three phase induction motor," Appl. Soft Comput., vol. 7, pp. 601-611, 2007.
26. M. Farasat and E. Karaman, "Efficiency-optimized hybrid field oriented and direct torque control of induction motor drive," presented at the Int. Conf. Elect. Mach. Syst. (ICEMS), Beijing, China, 2011.
27. B. Gau, W. K. Na, and B. Diong, Fuel Cells: Modeling, Control, and Applications. Boca Raton, FL, USA:CRCPress/Taylor&Francis, 2010.
28. M. K. Kazimierczuk, Pulse-width Modulated DC-DC Power Converters, 3rd ed. New York, NY, USA: Wiley, 2008.
29. S. N. Vukosavić, Digital Control of Electrical Drives. New York, NY, USA: Springer Science+Business Media, LLC, 2007.
30. I. K. Bousserhane, A. Hazzab, M. Rahli, M. Kamli, and B. Mazari, "Direct field-oriented control using backstepping strategy with fuzzy rotor resistance estimator for induction motor speed control," J. Inf. Technol. Control, vol. 35, no. 4, pp. 403-4011, 2006.
31. M. Zhang, W. Ma, J. Xu, and W. Li, "Vector control for the linear induction motor based on the position closed-loop," presented at the IEEE Int. Conf. Elect. Control Eng., Wuhan, China, Jun. 2010.
32. Compliance Testing to the IEC 1000-3-2 (EN 61000-3-2) and IEC 1000-3-3 (EN 61000-3-3) Standards, Hewlett Packard Co., Palo Alto, CA, USA, Application Note 1273, Dec. 1995
33. Electromagnetic Compatibility (EMC)-Part 3-2: Limits-Limits for Harmonic Current Emissions, IEC-61000-3-2, 2000.
34. S. Buso and P. Mattavelli, Digital Control in Power Electronics. San Rafael, CA, USA: Morgan & Claypool, 2006.
35. T. Reiter, D. Polenov, H. Pröbstle, and H. Herzog, "PWM dead time optimization method for automotive multiphase DC/DC-Converters," IEEE Trans. Power Electron., vol. 25, no. 6, pp. 1604-1614, Jun. 2010.
36. C. Shamim, "Designing a TMS320F280x based digitally controlled DCDC switching power supply," Texas Instruments Inc., Dallas, USA, Jul. 2005, pp. 1-15.