Tribological properties of biobased ester phosphonates

JAOCS, Journal of the American Oil Chemists' Society

Volumn 90, Issue 6, 2013, Pages 891-902

  Biresaw, Girma ^a   Bantchev, Grigor B ^a  

^a NATIONAL CENTER FOR AGRICULTURAL UTILIZATION RESEARCH   (United States)

Author keywords

4 Ball anti wear; 4 Ball extreme pressure; Biodegradable oils; Cloud point; Density; Methyl oleate; Oxidation stability; PDSC; Phosphonates; Pour point; Viscosity

Indexed keywords

ANTI-WEAR; BIO-DEGRADABLE OIL; CLOUD POINTS; EXTREME PRESSURE; METHYL OLEATE; OXIDATION STABILITY; PDSC; PHOSPHONATES; POUR POINTS;

DENSITY (SPECIFIC GRAVITY); PETROLEUM ADDITIVES; PITTING; VISCOSITY; WEAR RESISTANCE;

TRIBOLOGY;

EID: 84878711805     PISSN: 0003021X     EISSN: None     Source Type: Journal    
DOI: 10.1007/s11746-013-2232-1     Document Type: Article

References (47)

1. Schneider MP (2006) Plant-oil-based lubricants and hydraulic fluids. J Sci Food Agric 86:1769-1780
2. Lawate SS, Lal K, Huang C (1997) Vegetable oils - structure and performance. In: Booser ER (ed) Tribology Data Handbook. CRC Press, New York, pp 103-116
3. Graiver D, Narayan R (2006) Value-added chemicals from catalytic ozonation of vegetable oils. Lipid Technol 18(2):31-35
4. Meier MAR, Metzger JO, Schubert US (2007) Plant oil renewable resources as green alternatives in polymer science. Chem Soc Rev 36:1788-1802
5. Hope K (2006) Balancing lubricant properties with vegetable oil and PAO blends. In: Proceedings of the Lubricants and Fluids Technical Advisory Panel, United Soybean Board, Chicago
6. Rudnick LR, Abdellatif MA, Gül O, Biresaw G (2011) Vaporization and carbonization tendency of vegetable oils as a function of chemical composition: morphology of carbon deposits on steel surfaces at elevated temperature. In: Biresaw G, Mittal KL (eds) Surfactants in Tribology, vol 2. Taylor and Francis, Boca Raton, pp 409-433
7. Adhvaryu A, Biresaw G, Sharma BK, Erhan SZ (2006) Friction behavior of some seed oils: bio-based lubricant applications. Ind Eng Chem Res 45(10):3735-3740
8. Biresaw G, Bantchev G (2010) Elastohydrodynamic (EHD) traction properties of seed oils. Tribol Trans 53(4):573-583
9. Asadauskas SJ, Biresaw G, McClure TG (2010) Effects of chlorinated paraffin and ZDDP concentrations on boundary lubrication properties of mineral and soybean oils. Tribol Lett 37(2):111-121
10. Biresaw G, Asadauskas SJ, McClure TG (2012) Polysulfide and bio-based extreme pressure additive performance in vegetable vs. paraffinic base oils. Ind Eng Chem Res 51:262-273
11. Fox NJ, Stachowiak GW (2007) Vegetable oil-based lubricants - a review of oxidation. Tribol Intl 40:1035-1046
12. Jayadas NH, Nair KP (2006) Coconut oil as base oil for industrial lubricants - evaluation and modification of thermal oxidative and low temperature properties. Tribol Intl 39:873-878
13. Billenstein S, Blaschke G (1984) Industrial production of fatty amines and their derivatives. J Am Oil Chem Soc 61(2):353-356
14. Isbell TA, Cermak SC (2002) Synthesis of triglyceride estolides from lesquerella and castor oils. J Am Oil Chem Soc 79:1227-1233
15. Harry-O'kuru RE, Holser RA, Abbott TP, Weisleder D (2002) Synthesis and characteristics of polyhydroxy triglycerides from milkweed oil. Ind Crops Prod 15:51-58
16. Sharma BK, Adhvaryu A, Erhan SZ (2006) Synthesis of hydroxy thio-ether derivatives of vegetable oil. J Agric Food Chem 54:9866-9872
17. Bantchev GB, Kenar JA, Biresaw G, Han MG (2009) Free radical addition of butanethiol to vegetable oil double bonds. J Agric Food Chem 57(4):1282-1290
18. Biswas A, Sharma BK, Willett JL, Erhan SZ, Cheng HN (2008) Soybean oil as a renewable feedstock for nitrogen-containing derivatives. Energy Environ Sci 1(6):639-644
19. Doll KM, Sharma BK, Willett JL, Erhan SZ (2007) Synthesis of branched methyl hydroxy stearates including an ester from bio-based Levulinic acid. Ind Eng Chem Res 46:3513-3519
20. Biermann U, Bornscheuer U, Meier MAR, Metzger JO, Schafer HJ (2011) Oils and fats as renewable raw materials in chemistry. Angew Chem Int Ed 50:3854-3871
21. Schey JA (1983) Tribology in Metalworking Friction. Lubrication and Wear, American Society of Metals, Metals Park, OH
22. Peale LF, Messina J, Ackerman B, Sasin R, Swern D (1960) Evaluation of long-chain phosphorus compounds as lubricity additives. ASLE Trans 3:48-54
23. Swern D, Palm WE, Sasin R, Witnauer L (1960) Viscosity characteristics of long-chain phosphorus compounds. J Chem Eng Data 5:486-488
24. Forbes ES, Silver HB (1970) The effect of chemical structure on the load-carrying properties of organo phosphorus compounds. J Inst Petroleum 56:90-98
25. Berman A, Steinberg S, Campbell S, Ulman A, Israelachvili J (1998) Controlled microtribology of a metal oxide surface. Tribol Lett 4:43-48
26. Hirao K, Hasegawa T, Kidera Y, Memita M, Minami I (2003) Antiwear additives for neopentyl type esters: design and performance evaluation of amine salts of phosphonic acid. Toraibarojisuto/J Jpn Soc Tribol 48:734-740
27. Nadano H, Nakasako M, Kohno M, Yamaguchi H, Minami I (2005) Nihon Kikai Gakkai Ronbunshu. C Hen Trans Jpn Soc Mech Eng Part C 71(8):2657-2664
28. Sanin PI, Shepeleva ES, Ulyanova AV, Kleimenov BV (1960) The effect of synthetic additives in lubricating oil on wear under friction. Wear 3:200-218
29. Lozovoi YA, Shepeleva YS, Shipilov GV, Sanin PI (1972) Comparative study of aryl phosphonic acid esters as anti-wear additives. Neftekhimiya 12:901-906
30. Barber RI (1976) The preparation of some phosphorus compounds and their comparison as load carrying additives by the four-ball machine. ASLE Trans 19:319-328
31. Bantchev GB, Biresaw G, Vermillion K, Appell M (2012) Synthesis and spectral characterization of methyl 9(10)-dialkylphosphonostearates. Spectrochim Acta Part A: Mol Biomol Spectrosc. doi: 10.1016/j.saa.2013.02.039
32. Annon (2002) ASTM D 2270-93. Standard practice for calculating viscosity index from kinematic viscosity at 40 and 100 C. Ann B ASTM Stand 05.01:769-774
33. Anon (2002) ASTM D5949-96. Standard test method for pour point of petroleum products (automatic pressure pulse method). Ann B ASTM Stand 5.03:1051-1055
34. Anon (2002) ASTM D5773-95. Standard test method for cloud point of petroleum products (constant cooling rate method). Ann B ASTM Stand 5.03:811-816
35. Dunn RO (2010) Cold flow properties of biodiesel by automatic and manual analysis methods. J ASTM Int 7(4):1-15 (Paper ID JAI102618)
36. Anon (2002) ASTM D97-96a. Standard test method for pour point of petroleum products. Ann B ASTM Stand 5.01:85-92
37. Anon (2002) ASTM D2500-99. Standard test method for cloud point of petroleum products. Ann B ASTM Stand 5.01:861-863
38. Annon (2002) ASTM D 4172-94. Standard test method for wear preventive characteristics of lubricating fluid (four-ball method). Ann B ASTM Stand 05.02:752-756
39. Annon (2002) ASTM D 5183-95. Standard test method for determination of the coefficient of friction of lubricants using the four-ball wear test machine. Ann B ASTM Stand 05.03:165-169
40. Annon (2002) ASTM D 2783-88. Standard test method for measurement of extreme-pressure properties of lubricating fluids (four-ball method). Ann B ASTM Stand 05.02:130-137
41. Sasin R, Olszewski WF, Russell JR, Swern D (1959) Phosphorus derivatives of fatty acids. VII. Addition of dialkyl phosphonates to unsaturated compounds. J Am Chem Soc 81:6275-6277
42. Swern D, Palm WE, Sasin R, Witnauer LP (1960) Viscosity characteristics of long-chain phosphorus compounds. J Chem Eng Data 5:486-488
43. Pratas MJ, Freitas S, Oliveira MB, Monteiro SC, Lima AS, Coutinho JAP (2010) Densities and viscosities of fatty acid methyl and ethyl esters. J Chem Eng Data 55:3983-3990
44. Knothe G, Steidley KR (2007) Kinematic viscosity of biodiesel components (fatty acid alkyl esters) and related compounds at low temperatures. Fuel 86:2560-2567
45. Biresaw G, Bantchev GB, Cermak SC (2011) Tribological properties of sulfur modified vegetable oils. Tribol Lett 43(1):17-32
46. Sharma BK, Doll KM, Erhan SZ (2008) Ester hydroxy derivatives of methyl oleate: tribological, oxidation and low temperature properties. Biores Technol 99:7333-7340
47. (1972-1973) CRC Handbook of Chemistry and Physics, 53rd Edn, Weast RC, Editor-in-Chief, The Chemical Rubber Co., Cleveland, pp F183-F185