Atmospheric corrosion of Galfan coatings on steel in chloride-rich environments

Corrosion Science

Volumn 73, Issue , 2013, Pages 62-71

  Zhang, Xian ^a   Leygraf, Christofer ^a   Odnevall Wallinder, Inger ^a  

^a ROYAL INSTITUTE OF TECHNOLOGY   (Sweden)

Author keywords

A. Aluminum; A. Metal coatings; A. Zinc; B. IR spectroscopy; B. SEM; C. Atmospheric corrosion

Indexed keywords

AL PHASE; CORROSION INITIATION; CORROSION PRODUCTS; DOT OPERATORS; GALFAN COATING; MARINE EXPOSURE; ZNO;

ALUMINUM; ATMOSPHERIC CORROSION; CHLORINE COMPOUNDS; ZINC OXIDE;

ZINC;

EID: 84878375987     PISSN: 0010938X     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.corsci.2013.03.025     Document Type: Article

References (67)

1. Zhang X.G. Corrosion and Electrochemistry of Zinc 1996, Plenum Press, New York.
2. ArcelorMittal, Steels coated with Galfan zinc-aluminum alloy, 2008.
3. Bluni S.T., Marder A.R., Goldstein J.I. Surface characterization of hot-dip Galfan coatings. Mater. Charact. 1994, 33:93-97.
4. Murray J. The Al-Zn (aluminum-zinc) system. J. Phase Equilib. 1983, 4:55-73.
5. Marder A.R. The metallurgy of zinc-coated steel. Prog. Mater. Sci. 2000, 45:191-271.
6. Elvins J., Spittle J.A., Worsley D.A. Relationship between microstructure and corrosion resistance in Zn-Al alloy coated Galvanised steels. Corros. Eng. Sci. Technol. 2003, 38:197-204.
7. Zelechower M., Kliś J., Augustyn E., Grzonka J., Stróz D., Rzychoń T., WoŹnica H. The microstructure of annealed Galfan coating on steel substrate. Arch. Metall. Mater. 2012, 57:517-523.
8. López G.A., Mittemeijer E.J., Straumal B.B. Grain boundary wetting by a solid phase; microstructural development in a Zn-5wt.% Al alloy. Acta Mater. 2004, 52:4537-4545.
9. Elvins J., Spittle J.A., Worsley D.A. Microstructural changes in zinc aluminum alloy Galvanising as a function of processing parameters and their influence on corrosion. Corros. Sci. 2005, 47:2740-2759.
10. Ares A.E., Gassa L.M. Corrosion susceptibility of Zn-Al alloys with different grains and dendritic microstructures in Nacl solutions. Corros. Sci. 2012, 59:290-306.
11. Osório W.R., Freire C.M., Garcia A. The effect of the dendritic microstructure on the corrosion resistance of Zn-Al alloys. J. Alloys Compd. 2005, 397:179-191.
12. Almeida E., Morcillo M., Rosales B. Atmospheric corrosion of zinc Part 1: rural and urban atmospheres. Brit. Corros. J. 2000, 35:284-288.
13. Almeida E., Morcillo M., Rosales B. Atmospheric corrosion of zinc Part 2: marine atmospheres. Brit. Corros. J. 2000, 35:289-296.
14. de la Fuente D., Castaño J.G., Morcillo M. Long-term atmospheric corrosion of zinc. Corros. Sci. 2007, 49:1420-1436.
15. Graedel T.E. Corrosion mechanisms for zinc exposed to the atmosphere. J. Electrochem. Soc. 1989, 136:193C-203C.
16. Muster T.H., Bradbury A., Trinchi A., Cole I.S., Markley T., Lau D., Dligatch S., Bendavid A., Martin P. The atmospheric corrosion of zinc: the effects of salt concentration, droplet size and droplet shape. Electrochim. Acta 2011, 56:1866-1873.
17. Odnevall I., Leygraf C. Reaction Sequences in Atmospheric Corrosion of Zinc 1995, American Society for Testing and Materials, Philadelphia, PA, ETATS-UNIS.
18. Zhu F., Zhang X., Persson D., Thierry D. In situ infrared reflection absorption spectroscopy studies of confined zinc surfaces exposed under periodic wet-dry conditions. Electrochem. Solid-State Lett. 2001, 4:B19-B22.
19. Aastrup T., Leygraf C. Simultaneous infrared reflection absorption spectroscopy and quartz crystal microbalance measurements for in situ studies of the metal/atmosphere interface. J. Electrochem. Soc. 1997, 144:2986-2990.
20. Azmat N.S., Ralston K.D., Muddle B.C., Cole I.S. Corrosion of Zn under acidified marine droplets. Corros. Sci. 2011, 53:1604-1615.
21. 2. Corros. Sci. 2008, 50:111-123.
22. Friel J.J. Atmospheric corrosion products on AlZn and AlZn metallic coatings. Corrosion 1986, 42:422-426.
23. S.A. Matthes, S.D. Cramer, S.J. Bullard, B.S. Covino, B.S. Covino Jr, G.R. Holcomb, Atmospheric corrosion and precipitation runoff from zinc and zinc alloy surfaces, in: NACE Corrosion Conference, San Diego, CA (US), 2003.
24. Odnevall Wallinder I., Leygraf C., Karlén C., Heijerick D., Janssen C.R. Atmospheric corrosion of zinc-based materials: runoff rates, chemical speciation and ecotoxicity effects. Corros. Sci. 2001, 43:809-816.
25. Zoccola J.C., Townsend H.E., Borzillo A.R., Horton J.B. Atmospheric corrosion resistance of aluminum-zinc alloy-coated steel. Atmospheric Factors Affecting the Corrosion of Engineering Materials, ASTM STP 646 1978, American Society for Testing and Materials, Philadelphia, Pennsylvania. S.K. Coburn (Ed.).
26. Persson D., Thierry D., LeBozec N. Corrosion product formation on Zn55Al coated steel upon exposure in a marine atmosphere. Corros. Sci. 2011, 53:720-726.
27. Li Y. Formation of nano-crystalline corrosion products on Zn-Al alloy coating exposed to seawater. Corros. Sci. 2001, 43:1793-1800.
28. Odnevall Wallinder I., He W., Augustsson P.E., Leygraf C. Characterization of black rust staining of unpassivated 55% Al-Zn alloy coatings. Effect of temperature, pH and wet storage. Corros. Sci. 1999, 41:2229-2249.
29. Volovitch P., Vu T.N., Allély C., Abdel Aal A., Ogle K. Understanding corrosion via corrosion product characterization: II. role of alloying elements in improving the corrosion resistance of Zn-Al-Mg coatings on steel. Corros. Sci. 2011, 53:2437-2445.
30. Qiu P., Leygraf C., Odnevall Wallinder I. Evolution of corrosion products and metal release from Galvalume coatings on steel during short and long-term atmospheric exposures. Mater. Chem. Phys. 2012, 133:419-428.
31. Zhang X., Vu T.-N., Volovitch P., Leygraf C., Ogle K., Odnevall Wallinder I. The initial release of zinc and aluminum from non-treated Galvalume and the formation of corrosion products in chloride containing media. Appl. Surf. Sci. 2012, 258:4351-4359.
32. Moreira A.R., Panossian Z., Camargo P.L., Moreira M.F., da Silva I.C., de Carvalho J.E.R. Zn/55Al coating microstructure and corrosion mechanism. Corros. Sci. 2006, 48:564-576.
33. Tang N.-Y., Liu Y. Corrosion performance of aluminum-containing zinc coatings. ISIJ Int. 2010, 50:455-462.
34. Yang L., Zhang Y., Zeng X., Song Z. Corrosion behavior of superplastic Zn-Al alloys in simulated acid rain. Corros. Sci. 2012, 59:229-237.
35. Stellnberger K.-H., Geisler S. Neuer Laborkorrosionstest - relevante Ergebnisse. Journal für Oberflächentechnik 2009, 49:32ff.
36. Chen Z.Y., Zakipour S., Persson D., Leygraf C. Effect of sodium chloride particles on the atmospheric corrosion of pure copper 2004, NACE International, Houston, TX, ETATS-UNIS, pp. 479-491.
37. Gil H., Leygraf C. Quantitative in situ analysis of initial atmospheric corrosion of copper induced by acetic acid. J. Electrochem. Soc. 2007, 154:C272-C278.
38. ISO, ISO 17752:2012, Corrosion of metals and alloys - procedures to determine and estimate runoff rates of metals from materials as a result of atmospheric corrosion, 2012.
39. Sandberg J., Odnevall Wallinder I., Leygraf C., Le Bozec N. Corrosion-induced zinc runoff from construction materials in a marine environment. J. Electrochem. Soc. 2007, 154:C120-C131.
40. Lindström D., Odnevall Wallinder I. Long-term use of Galvanized steel in external applications. Aspects of patina formation, zinc runoff, barrier properties of surface treatments, and coatings and environmental fate. Environ. Monit. Assess. 2011, 173:139-153.
41. Vu T.N., Mokaddem M., Volovitch P., Ogle K. The anodic dissolution of zinc and zinc alloys in alkaline solution. II. Al and Zn partial dissolution from 5% Al-Zn coatings. Electrochim. Acta 2012, 74:130-138.
42. T.E. Madey, J.T.J. Yates., Vibrational Spectroscopy of Molecules on Surfaces, first edition, Methods of Surface Characterization, Springer, 1987.
43. Hales M.C., Frost R.L. Synthesis and vibrational spectroscopic characterisation of synthetic hydrozincite and smithsonite. Polyhedron 2007, 26.
44. 3. J. Raman Spectrosc. 2009, 40:645-649.
45. Hedberg J., Le Bozec N., Odnevall Wallinder I. Spatial distribution and formation of corrosion products in relation to zinc release for zinc sheet and coated pre-weathered zinc at an urban and a marine atmospheric condition. Mater. Corros. 2011, 1-9.
46. 4 spinel synthesized by the sol-gel method. J. Sol-Gel Sci. Technol. 2009, 49:101-105.
47. S. Sunder, S. Rohilla, S. Kumar, P. Aghamkar, Structural characterization of spinel zinc aluminate nanoparticles prepared by coprecipitation method, in: S.K. Tripathi, K. Dharamvir, R. Kumar, G.S.S. Saini, (Eds.), International Conference on Advances in Condensed and Nanomaterials, 2011.
48. Chen W.-B., Chen P., Chen H.Y., Wu J., Tsai W.-T. Development of Al-containing zinc-rich paints for corrosion resistance. Appl. Surf. Sci. 2002, 187:154-164.
49. 2 template. Nanoscale Res. Lett. 2010, 5:1779-1787.
50. Lee H.W., Park B.K., Tian M.Y., Lee J.M. Relationship between properties of pseudo-boehmite and its synthetic conditions. J. Ind. Eng. Chem. 2006, 12:295-300.
51. Liang D., Allen H.C., Frankel G.S., Chen Z.Y., Kelly R.G., Wu Y., Wyslouzil B.E. Effects of sodium chloride particles, ozone, UV, and relative humidity on atmospheric corrosion of silver. J. Electrochem. Soc. 2010, 157:C146-C156.
52. Chen Z.Y., Persson D., Samie F., Zakipour S., Leygraf C. Effect of carbon dioxide on sodium chloride-induced atmospheric corrosion of copper. J. Electrochem. Soc. 2005, 152:B502-B511.
53. Thomas N., Rajamathi M. Intracrystalline oxidation of thiosulfate-intercalated layered double hydroxides. Langmuir 2009, 25:2212-2216.
54. 2O in a marine atmosphere. Corros. Sci. 1993, 34:1213-1229.
55. 3 composite coatings containing different forms of alumina. J. Appl. Electrochem. 2010, 40:2161-2169.
56. 3 nanopowders obtained by polymeric precursor method. Mater. Chem. Phys. 2007, 103:394-399.
57. 4 nanostructures grown on c-sapphire. Superlattices Microstruct. 2007, 42:327-332.
58. Leygraf C., Graedel T. Atmospheric Corrosion 2000, John Wiley & Sons, New York.
59. Schürz S., Luckeneder G.H., Fleischanderl M., Mack P., Gsaller H., Kneissl A.C., Mori G. Chemistry of corrosion products on Zn-Al-Mg alloy coated steel. Corros. Sci. 2010, 52:3271-3279.
60. Shimizu T., Yoshizaki F., Miyoshi Y., Andoh A. Corrosion products of hot-dip Zn-6%Al-3%Mg coated steel sheet subjected to atmospheric exposure Tetsu to Hagane. J. Iron and Steel Inst. Jpn. 2003, 89:166-173.
61. Kasperek J., Verchere D., Jacquet D., Phillips N. Analysis of the corrosion products on galvanized steels by FTIR spectroscopy. Mater. Chem. Phys. 1998, 56:205-213.
62. Oriakhi C.O., Farr I.V., Lerner M.M. Thermal characterization of poly(styrene sulfonate) layered double hydroxide nanocomposites. Clays Clay Miner. 1997, 45:194-202.
63. Marcus P., Maurice V., Strehblow H.H. Localized corrosion (pitting): a model of passivity breakdown including the role of the oxide layer nanostructure. Corros. Sci. 2008, 50:2698-2704.
64. Miao W., Cole I.S., Neufeld A.K., Furman S. Pitting corrosion of Zn and Zn-Al coated steels in pH 2 to 12 NaCl solutions. J. Electrochem. Soc. 2007, 154:C7-C15.
65. Theiss F.L., Sear-Hall M.J., Palmer S.J., Frost R.L. Zinc aluminum layered double hydroxides for the removal of iodine and iodide from aqueous solutions. Desalin Water Treat. 2012, 39:166-175.
66. Graedel T.E. Corrosion mechanisms for aluminum exposed to the atmosphere. J. Electrochem. Soc. 1989, 136:204C-212C.
67. Bertling S., Odnevall Wallinder I., Leygraf C., Berggren Kleja D. Occurrence and fate of corrosion-induced zinc in runoff water from external structures. Sci. Total Environ. 2006, 367:908-923.