The strain rate dependent material behavior of S-GFRP extracted from GLARE

Mechanics of Advanced Materials and Structures

Volumn 20, Issue 7, 2013, Pages 505-514

  Gerlach, Robert ^a   Siviour, Clive R ^a   Wiegand, Jens ^a   Petrinic, Nik ^a  

^a UNIVERSITY OF OXFORD   (United Kingdom)

Author keywords

Coupon pull out; GFRP; GLARE; Hopkinson bar; Impact; S Glass; Speckle analysis; Strain rate

Indexed keywords

GFRP; HOPKINSON BAR; IMPACT; PULL OUT; S-GLASS;

FIBERS; GLARE; GLASS FIBERS;

STRAIN RATE;

EID: 84877128264     PISSN: 15376494     EISSN: 15376532     Source Type: Journal    
DOI: 10.1080/15376494.2011.627646     Document Type: Article

References (38)

1. M.S.H. Fatt, C.F. Lin, D.M. Revilock, and D.A. Hopkins, Ballistic impact of GLARE (TM) fiber-metal laminates, Compos. Struct., vol. 61, no. 1-2, pp. 73-88, 2003.
2. G.C. Wu and J.M. Yang, The mechanical behavior of GLARE laminates for aircraft structures, JOM, vol. 57, no. 1, pp. 72-79, 2005.
3. M.G. Hebsur, R.D. Noebe, and D.M. Revilock, Impact resistance of lightweight hybrid structures for gas turbine engine fan containment applications, J. Mater. Eng. Perform., vol. 12, no. 4, pp. 470-479, 2003.
4. A. Vlot, Impact loading on fibre metal laminates, Int. J. Impact Eng., vol. 18, no. 3, pp. 291-307, 1996.
5. A. Vlot, Impact properties of fiber metal laminates, Compos. Eng., vol. 3, no. 10, pp. 911-927, 1993.
6. A. Vlot, E. Kroon, and G. La Rocca, Impact response of fibermetal laminates, Key Eng. Mater., vol. 141-143, no. 1, pp. 235-276, 1998.
7. V.V. Sidelnikov, et al., Impact behaviour of SIAL (glass/epoxyaluminum) laminates. In: Aluminium Alloys: Their Physical and Mechanical Properties, Parts 1-3, Proceedings of the 7th International Conference ICAA7, pp. 1221-1224, April 9-14, Charlottesville, Virginia, 2000.
8. N. Petrinic, High rate mechanical properties of GLARE, Internal Report No. SMG051, Solid Mechanics Group, Dept. of Engineering Science, University of Oxford, 2002.
9. G.S. Langdon, Y. Chi, G.N. Nurick, and P. Haupt, Response of GLARE (c) panels to blast loading, Eng. Struct., vol. 31, no. 12, pp. 3116-3120, 2009.
10. F. Bagnoli, M. Bernabei, D. Figueroa-Gordon, and P.E. Irving, The response of aluminium/GLARE hybrid materials to impact and to in-plane fatigue, Mater. Sci. Eng. A: Struct. Mater. Prop. Microstruct. Process., vol. 523, no. 1-2, pp. 118-124, 2009.
11. M.A. McCarthy, J.R. Xiao, N. Petrinic, A. Kamoulakos, and V. Melito, Modelling of bird strike on an aircraft wing leading edge made from fibre metal laminates-Part 1: Material modelling, Appl. Compos. Mater., vol. 11, no. 5, pp. 295-315, 2004.
12. M.A. McCarthy, J.R. Xiao, N. Petrinic, A. Kamoulakos, and V. Melito, Modelling bird impacts on an aircraft wing-Part 1: Material modelling of the fibre metal laminate leading edge material with continuum damage mechanics, Int. J. Crashworthiness, vol. 10, no. 1, pp. 41-49, 2005.
13. T.E. Tay, H.G. Ang, and V.P.W. Shim, An empirical strain ratedependent constitutive relationship for glass-fibre reinforced epoxy and pure epoxy, Compos. Struct., vol. 33, no. 4, pp. 201-210, 1995.
14. J.L. Tsai and C.T. Sun, Dynamic compressive strengths of polymeric composites, Int. J. Solids Struct., vol. 41, no. 11-12, pp. 3211-3224, 2004.
15. R.O. Ochola, K. Marcus, G.N. Nurick, and T. Franz, Mechanical behaviour of glass and carbon fibre reinforced composites at varying strain rates, Compos. Struct., vol. 63, no. 3-4, pp. 455-467, 2004.
16. O.I. Okoli and G.F. Smith, High strain rate characterisation of a glass/epoxy composite, J. Compos. Technol. & Res., vol. 22, no. 1, pp. 3-11, 2000.
17. G.H. Staab and A. Gilat, High-strain rate response of angle-ply glass epoxy laminates, J. Compos. Mater., vol. 29, no. 10, pp. 1308-1320, 1995.
18. D. Asprone, E. Cadoni, A. Prota, and G. Manfredi, Strain-rate sensitivity of a pultruded E-glass/polyester composite, J. Compos. Constr., vol. 13, no. 6, pp. 558-564, 2009.
19. A. Armenaka and C. Sciammar, Response of glass-fiber-reinforced epoxy specimens to high rates of tensile loading, Exper. Mech., vol. 13, no. 10, p. 433-440, 1973.
20. J.M. Lifshitz, Impact strength of angle ply fiber reinforcedmaterials, J. Compos. Mater., vol. 10, no. 1, pp. 92-101, 1976.
21. S.V. Hayes and D.F. Adams, Rate sensitive tensile impact properties of fully and partially loaded unidirectional composites, J. Test. Eval., vol. 10, no. 2, pp. 61-68, 1982.
22. G.C. Jacob, J.M. Starbuck, J.F. Fellers, S. Simunovic, and R.G. Boeman, Strain rate effects on the mechanical properties of polymer compositematerials, J. Appl. Polym. Sci., vol. 94, no. 1, pp. 296-301, 2004.
23. J. Harding and L.M. Welsh, A tensile testing technique for fiberreinforced composites at impact rates of strain, J. Mater. Sci., vol. 18, no. 6, pp. 1810-1826, 1983.
24. A. Gilat, R.K. Goldberg, and G.D. Roberts, Strain rate sensitivity of epoxy resin in tensile and shear loading, Report NASA/TM-2005-213595, Ohio State University, Glenn Research Center, 2005.
25. B.N. Cox, M.S. Dadkhah, and W.L. Morris, On the tensile failure of 3-D woven composites, Composites: Part A, vol. 77a, pp. 477-458, 1996.
26. J. Rodriguez, I.S. Chocron, M.A. Martinez, and V. Sanchez-Galvez, High strain rate properties of aramid and polyethylene woven fabric composites, Composites: Part B: Eng., vol. 27, no. 2, pp. 147-154, 1996.
27. O.I. Okoli and G.F. Smith, Failure modes of fibre reinforced composites: The effects of strain rate and fibre content, J. Mater. Sci., vol. 33, no. 22, pp. 5415-5422, 1998.
28. J.E. Field, S.M. Walley, W.G. Proud, H.T. Goldrein, and C.R. Siviour, Review of experimental techniques for high rate deformation and shock studies, Int. J. Impact Eng., vol. 30, no. 7, pp. 725-775, 2004.
29. C.P. Buckley, J. Harding, J.P. Hou, C. Ruiz, and A. Trojanowski, Deformation of thermosetting resins at impact rates of strain. Part I: Experimental study, J. Mech. Phys. Solids, vol. 49, no. 7, pp. 1517-1538, 2001.
30. R. Gerlach, C.R. Siviour, N. Petrinic, and J. Wiegand, Experimental characterisation and constitutive modelling of RTM-6 resin under impact loading, Polymer, vol. 49, no. 11, pp. 2728-2737, 2008.
31. M. Sj ödahl, Electronic speckle photography: Increased accuracy by non-integral pixel shifting, Appl. Opt., vol. 33, pp. 6667-6673, 1994.
32. M. Sj ödahl and L.R. Benckert, Electronic speckle photography: Analysis of an algorithm giving the displacement with subpixel accuracy, Appl. Opt., vol. 32, pp. 2278-2284, 1993.
33. J. Kajberg and B. Wikman, Viscoplastic parameter estimation by high strain-rate experiments and inverse modelling-Speckle measurements and high-speed photography, Int. J. Solids Struct., vol. 44, no. 1, pp. 145-164, 2007.
34. C.R. Siviour, S.G. Grantham, D.M. Williamson, W.G. Proud, and J.E. Field, Novel measurements of material properties at high rates of strain using speckle metrology, Imag. Sci. J., vol. 57, no. 6, pp. 326-332, 2009.
35. C.R. Siviour and S.G. Grantham, High resolution optical measurements of specimen deformation in the split Hopkinson pressure bar, Imag. Sci. J., vol. 57, no. 6, pp. 333-343, 2009.
36. X. Yuanming, J. Yuan, and B. Yang, A statistical model and experimental study of the strain-rate dependence of the strength of fibres, Compos. Sci. Technol., vol. 52, no. 4, pp. 499-504, 1994.
37. C.R. Siviour, S.M. Walley, W.G. Proud, and J.E. Field, The high strain rate compressive behaviour of polycarbonate and polyvinylidene difluoride, Polymer, vol. 46, no. 26, pp. 12546-12555, 2005.
38. M.Q. Nguyen, D.J. Elder, J. Bayandor, R.S. Thomson, and M.L. Scott, A review of explicit finite element software for composite impact analysis, J. Compos. Mater., vol. 39, no. 4, pp. 375-386, 2005.