Plastic flow and microstructure evolution during thermomechanical processing of a pm nickel-base superalloy

Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science

Volumn 44, Issue 6, 2013, Pages 2778-2798

  Semiatin, S L ^a   McClary, K E ^b,c   Rollett, A D ^d   Roberts, C G ^e   Payton, E J ^f   Zhang, F ^g   Gabb, T P ^h  

^a AIR FORCE RESEARCH LABORATORY   (United States)

^b WRIGHT STATE UNIVERSITY   (United States)

^c Hall Company ^*  (United States)

^d CARNEGIE MELLON UNIVERSITY   (United States)

^e Vallourec Research Center   (United States)

^f BAM FEDERAL INSTITUTE FOR MATERIALS RESEARCH AND TESTING   (Germany)

^g Computherm LLC ^*  (United States)

^h NASA GLENN RESEARCH CENTER   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

DEFORMATION CONDITIONS; DYNAMIC GRAIN GROWTH; FORGING CONDITIONS; HOT COMPRESSION TESTS; MICRO-STRUCTURE EVOLUTIONS; NICKEL BASE SUPERALLOY; STEADY-STATE FLOWS; THERMO-MECHANICAL PROCESSING;

COMPRESSION TESTING; DEFORMATION; DYNAMIC RECRYSTALLIZATION; FORGINGS; GRAIN GROWTH; GRAIN SIZE AND SHAPE; HEAT TREATMENT; PLASTIC FLOW; SUPERALLOYS;

MICROSTRUCTURE;

EID: 84877041026     PISSN: 10735623     EISSN: None     Source Type: Journal    
DOI: 10.1007/s11661-013-1675-1     Document Type: Article

References (34)

1. M.J. Donachie, Jr., ed., Superalloys Source Book, ASM International, Materials park, OH, 1984.
2. J. Gayda, T.P. Gabb, and P.T. Kantzos: US Patent 6,660,110, December 2003.
3. S.L. Semiatin and D.R. Barker: US Patent 5,447,580, September 1995.
4. G.F. Mathey: US Patent 5,312,497, May 1994.
5. S. Ganesh and R.G. Tolbert: US Patent 5,527,020, June 1996.
6. J. Lemsky: Unpublished research, Ladish Co., Cudahy, WI, 2006.
7. J-P.A. Immarigeon and P.H. Floyd: Metall. Trans. A, 1981, vol. 12A, pp. 1177- 1186.
8. Y. Combres and C. Levaillant: Inter. J. Plasticity, 1990, vol. 6, pp. 505-519.
9. A.K. Koul and J-P.A. Immarigeon: Acta Metall., 1987, vol. 35, pp. 1791-1805.
10. M.O. Alniak and F. Bedir: Mater. Sci. Eng. A, 2006, vol. A429, pp. 295-303.
11. M.O. Alniak and F. Bedir: Mater. Sci. Eng. B, 2006, vol. B130, pp. 254-263.
12. W. Tu and T.M. Pollock: Superalloys 2008, R.C. Reed, K.A. Green, P. Caron, T.P. Gabb, M.G. Fahrmann, E.S. Huron, and S. A. Woodard, eds., TMS, Warrendale, PA, 2008, pp. 395-403.
13. W.J Tu: PhD Dissertation, University of Michigan, Ann Arbor, MI, 2010.
14. W.J. Tu and T.M. Pollock: Metall. Mater. Trans. A, 2010, vol. 41A, pp. 2002-2009.
15. J.W. Martin, R.D. Doherty, and B. Cantor: Stability of Microstructure in Metallic Systems, Cambridge University Press, Cambridge, UK, 1997.
16. M. Soucail, M. Marty, and H. Ocor: Superalloys 1996, R.D. Kissinger, D.J. Deye, D.L. Anton, A.D. Cetel, M.V. Nathal, T.M. Pollock, and D.A. Woodford, eds., TMS, Warrendale, PA, 1996, pp. 663-666.
17. E. Huron, S. Shrivatsa, and E. Raymond: Superalloys 2000, T.M. Pollock, R.D. Kissinger, R.R. Bowman, K.A. Green, M. McLean, S. Olson, and J.J. Schirra, eds., TMS, Warrendale, PA, 2000, pp. 49-58.
18. E.J. Payton: PhD Dissertation, The Ohio State University, Columbus, OH, 2009.
19. P.R. Rios: Acta Mater., 1997, vol. 45, pp. 1785-1789.
20. K. Song and M. Aindow: Proc. Materials Science and Technology (MS&T) 2006: Fundamentals and Characterization, Vol. 2, Z-K. Lu, C.E. Campbell, L.Q. Chen, E.B. Damm, J.E. Morral, and J.L. Murray, eds., TMS, Warrendale, PA, 2006, pp. 211-20.
21. G. Wang, D.S. Xu, E.J. Payton, N. Ma, R. Yang, M.J. Mills, and Y. Wang: Acta Mater., 2011, vol. 59, pp. 4587-4594.
22. T.P. Gabb, J. Gayda, and J. Falsey: Report NASA/TM-2005-213649, National Aeronautics and Space Administration, Glenn Research Center, Cleveland, OH, June 2005. (Available electronically at http://gltrs.grc.nasa.gov).
23. D.D. Krueger, R.D. Kissinger, R.G. Menzies, and C.S. Wukusick: US Patent 4,957,567, September 1990.
24. E.L. Raymond, R.D. Kissinger, A.J. Paxson, and E.S. Huron: US Patent 5,584,947, December 1996.
25. E.S. Huron, J.A. Heaney, D.P. Mourer, J.R. Groh, E.L. Raymond, D.A. Utah, M.J. Weimer, and K.R. Bain: US Patent Application 11/770,257, January 2009.
26. D.P. Mourer and K.R. Bain: US Patent Application 12/494,896, December 2010.
27. S.L. Semiatin, K. E. McClary, A.D. Rollett, C.G. Roberts, E.J. Payton, F. Zhang, and T.P. Gabb: Metall. Mater. Trans. A, 2012, vol. 43A, pp. 1649-1661.
28. J. Gayda, T.P. Gabb, and P.T. Kantzos: Superalloys 2004, K.A. Green, T.M. Pollock, H. Harada, T.E. Howson, R.C. Reed, J.J. Schirra, and S. Walston, eds., TMS, Warrendale, PA, 2004, pp. 323-30.
29. J. Lemsky: Report NASA/CR-2005-213574, Ladish Company, Inc., Cudahy, WI, February 2005. (Available electronically at http://gltrs.grc.nasa.gov).
30. S.I. Oh, S.L. Semiatin, and J.J. Jonas: Metall. Trans. A, 1992, vol. 23A, pp. 963-975.
31. A.A. Salem, M.G. Glavicic, and S.L. Semiatin: Mater. Sci. Eng. A, 2008, vol. A494, pp. 350-359.
32. E.J. Payton, P.J. Phillips, and M.J. Mills: Mater. Sci. Eng. A, 2010, vol. A527, pp. 2684-2692.
33. J.K. Mackenzie: Biometrika, 1958, vol. 45, pp. 229-240.
34. J. Dennis, P.S. Bate, and F.J. Humphreys: Acta Mater., 2009, vol. 57, pp. 4539-4547.