Effect of stress level on the high temperature deformation and fracture mechanisms of Ti-45Al-2Nb-2Mn-0.8 vol. pct TiB2: An in situ experimental study

Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science

Volumn 44, Issue 4, 2013, Pages 1887-1896

  Muñoz Moreno, Rocío ^a,b   Pérez Prado, M Teresa ^a   Llorca, Javier ^a,c   Ruiz Navas, Elisa María ^b   Boehlert, Carl J ^a,c,d  

^a IMDEA MATERIALS INSTITUTE   (Spain)

^b UNIVERSIDAD CARLOS III DE MADRID   (Spain)

^c UNIVERSIDAD POLITÉCNICA DE MADRID   (Spain)

^d Michigan State University   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

CONSTANT STRAIN RATE; CRACK PROPAGATION PATH; EXPERIMENTAL STUDIES; HIGH TEMPERATURE DEFORMATION; PROPAGATION MECHANISM; QUANTITATIVE MEASUREMENT; SCANNING ELECTRON MICROSCOPE; TIAL INTERMETALLIC ALLOY;

ALUMINUM; CRACK PROPAGATION; CREEP; MANGANESE; SCANNING ELECTRON MICROSCOPY; TENSILE TESTING;

CRACKS;

EID: 84877010899     PISSN: 10735623     EISSN: None     Source Type: Journal    
DOI: 10.1007/s11661-012-1515-8     Document Type: Article

References (44)

1. D.M. Dimiduk: Materials Science and Engineering A, 1999, vol. 263, pp. 281-288.
2. G. Lütjering and J.C. Williams: Titanium. Enigineering Materials and Processes, Chapter 8, 2nd ed., Springer, Berlin, 2007, pp. 337-66.
3. F. Appel and M. Oehring: Titanium and Titanium Alloys. Fundamentals and Applications, Wiley, Weinheim, 2003. Chap. 4, pp. 89-152.
4. J. Beddoes, L. Zhao, P. Au, D. Dudzinski, J. Triantafillou: Structural Intermetallics, Warrendale, PA, The Minerals Metals and Materials Society, 1997, pp. 109-118.
5. T.A. Parthasarathy, M. Keller, M.G. Mendiratta: Scripta Metallurgica, 1998, vol. 38 (7), pp.1025-1031.
6. T.A. Parthasarathy, M.G. Mendiratta, D.M. Dimiduk: Scripta Metallurgica, 1997, vol. 37 (3), pp. 315-321.
7. C.J. Boehlert, D.M. Dimiduk, K.J. Hemker: Scripta Materialia, 2002, vol. 46 (4), pp. 259-267.
8. H. Zhu, D.Y. Seo, K. Mayurama, P. Au: Scripta Materalia, 2006, vol. 54, pp. 1979-1984.
9. H. Zhu, D.Y. Seo, K. Mayurama, P. Au.: Materials Science and Engineering A, 2008, vol. 483-484, pp. 533-536.
10. R. Muñoz-Moreno, C.J. Boehlert, E.M. Ruiz Navas, M.T. Pérez Prado, J. Llorca (2012) Metall. Mater. Trans. A 43A:1198-1208.
11. F. Appel, U. Brossmann, U. Christoph, S. Eggert, P. Janschek, U. Lorenz, J. Müllauer, M. Oehring, and J.D.H. Paul: Adv. Eng. Mater. Rev., 2000 vol. 2 (11), pp. 699-720.
12. M.J. Blackburn: in Technology and Application of Titanium, R.I. Jaffee and N.E. Promisel, eds., Pergamon Press, Oxford, 1970.
13. C. T. Liu, P. J. Maziasz: Intermetallics, 1997, vol. 6, pp. 653-661.
14. M. A. Morris, T. Lipe: Intermetallics, 1997, vol. 5, pp. 329-337.
15. F. Appel, J. D. Paul, M. Oehring (2011) γ-Titanium Aluminides. Wiley, New York.
16. J.B. Singh, G. Molénat, M. Sundararaman, S. Banerjee, G. Saada, P. Veyssière, and A. Couret: Phil. Mag., 2006, vol. 86 pp. 47-60.
17. F. Appel, U. Christoph, M. Oehring (2002) Mater Sc. Eng. A 329-331:780-787.
18. S. Liwen, L. Ying, M. Yue, and G. Shengkai: Rare Met., 2011, vol. 30 p. 323.
19. F. Appel, R. Wagner: Mat. Sci. Eng. R, 1998, vol. 22, pp. 187-268.
20. M. Hazzledine, B.K. Kad (1995) Mater. Sci. Eng. A 192/193:340-346.
21. T. A. Parthasarathy, P. R. Subramanian, M. G. Mendiratta and D. M. Dimiduk.: Acta mater., 2000, vol. 48, pp. 541-551.
22. M.E. Kassner, M.T. Pérez-Prado. Fundamentals of creep in metals and alloys. Elsevier, Oxford (UK), 2004.
23. A. Gorzel, G. Sauthoff: Intermetallics, 1999, vol. 7, pp. 371-380.
24. W. J. Zhang, S. C. Deevi: Intermetallics, 2002, vol.10, pp. 603-611.
25. H. Zhu, D.Y. Seo, K. Maruyama, P. Au (2005) Scr. Mater 52:45-50.
26. Y.H. Lu, Y.G. Zhang, L.J. Qiao, Y.B. Wang, C.Q. Chen and W.Y. Chu: Intermetallics, 2000, vol. 8, pp. 1443-1445.
27. C.J. Boehlert, S.C. Longanbach and T.R. Bieler: Phil. Mag., 2008, vol. 88 (5), pp. 641-664.
28. C.J. Boehlert, C.J. Cowen, S. Tamirisakandala, D.J. McEldowney and D.B. Miracle: Scripta Mater., 2006, vol.55, pp.465-468.
29. C.J. Cowen and C.J. Boehlert: Metall. Mater. Trans. A, 2007, vol.38A, pp.26-34.
30. W. Chen and C. J. Boehlert: International Journal of Fatigue, 2010, vol. 32 (5), pp. 799-807.
31. "Standard Test Methods for Determining Average Grain Size", ASTM Designation E112-96e3, ASTM, West Conshohocken, PA, 1996
32. D.E. Larsen, S. Kampe, L. Christodoulou (1990) Mater. Res. Soc. Symp. Proc. 194:285.
33. W.J. Zhang, S.C. Deevi (2002) Intermetallics 10:603-611.
34. W.J. Zhang, S.C. Deevi (2003) Intermetallics 11:177-185.
35. D.Y. Seo, H. Saari, J. Beddoes, and L. Zhao: in International Conference on Structural Intermetallics, K.J. Hemker, D.M. Dimiduk, H. Clemens, R. Darolia, H. Inui, J.M. Larsen, V.K. Sikka, M. Thomas, and J.D. Whittenberger, eds., The Minerals, Metals and Materials Society, PA, Warrendale, 2001, pp. 653-62.
36. J. Beddoes, W. Wallace, L. Zhao (1995) Int. Mater. Rev. 40(5):197-217.
37. M. Es-Souni, A. Bartels, R. Wagner (1995) Mater. Sci. Eng. A 192-193:698-706
38. W.J. Zhang and S.C. Deevi: in International Conference on Structural Intermetallics, K.J. Hemker, D.M. Dimiduk, H. Clemens, R. Darolia, H. Inui, J.M. Larsen, V.K. Sikka, M. Thomas, and J.D. Whittenberger, eds., The Minerals, Metals and Materials Society, PA, Warrendale, 2001, pp. 699-708.
39. J. Beddoes, L. Zhao, P. Au, D. Dudzinsky, and J. Triantafillou: in International Conference on Structural Intermetallics, M.V. Nathal R. Darolia, C.T. Liu, P.L. Martin, D.B. Miracle, R. Wagner, and M. Yamaguchi, eds., The Minerals, Metals and Materials Society, Warrendale, PA, 1997, pp. 109-18.
40. D.B. Worth, J.W. Jones, J.E. Allison (1995) Metall. Mater. Trans. A 26A:2947-2959.
41. L. M. Hsiung, T.G. Nieh (1999) Intermetallics 7:821-827.
42. K. Maruyama, R. Yamamoto, H. Nakakuki, N. Fujitsuna (1997) Materials Science and Engineering: A 239-240:419-428.
43. J.N. Wang, T.G. Nieh (1998) Acta Mater 46:1887-1901.
44. J. Beddoes, L. Zhao, P. Au, D. Dudzinsky, and J. Triantafillou: in International Conference on Structural Intermetallics, M.V. Nathal, R. Darolia, C.T. Liu, P.L. Martin, D.B. Miracle, R. Wagner, and M. Yamaguchi, eds., The Minerals, Metals and Materials Society, Warrendale, PA, 1997, pp. 109-18.