In situ observations of the deformation behavior and fracture mechanisms of Ti-45Al-2Nb-2Mn + 0.8 vol pct TiB 2

Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science

Volumn 43, Issue 4, 2012, Pages 1198-1208

  Muñoz Moreno, Rocio ^a,b   Boehlert, Carl J ^a,c,d   Teresa Perez Prado M ^a   Ruiz Navas, Elisa M ^b   Llorca, Javier ^a,d  

^a IMDEA MATERIALS INSTITUTE   (Spain)

^b UNIVERSIDAD CARLOS III DE MADRID   (Spain)

^c Michigan State University   (United States)

^d UNIVERSIDAD POLITÉCNICA DE MADRID   (Spain)

Author keywords

[No Author keywords available]

Indexed keywords

APPLIED STRESS; COLONY BOUNDARY; CREEP TESTS; DAMAGE MECHANISM; DAMAGE NUCLEATION; DEFORMATION AND FRACTURE; DEFORMATION BEHAVIOR; ELONGATION TO FAILURE; FRACTURE MECHANISMS; HIGH TEMPERATURE; HIGH TEMPERATURE CREEP; IN-SITU OBSERVATIONS; IN-SITU TENSILE; LOW-PRESSURE TURBINE BLADES; LOWER STRESS; PROPAGATION SITES; ROOM TEMPERATURE; SCANNING ELECTRON MICROSCOPES; TENSILE CREEP; TERTIARY CREEP;

BRITTLE FRACTURE; CREEP; MANGANESE; SCANNING ELECTRON MICROSCOPY;

ALUMINUM;

EID: 84859267261     PISSN: 10735623     EISSN: None     Source Type: Journal    
DOI: 10.1007/s11661-011-1022-3     Document Type: Article

References (39)

1. E. A. Loria: Intermetallics, 2000, vol. 8, pp. 1339-45.
2. M. Yamaguchi, H. Inui, and K. Ito: Acta Mater., 2000, vol. 48, pp. 307-22.
3. G. Lutjering and J. C. Williams: Titanium. Engineering Materials and Processes., 2nd ed., Springer-Verlag, Berlin, 2007, pp. 337-66.
4. C. Mercer, J. Lou, S. M. Allameh, and W. O. Soboyejo: Metall. Mater. Trans. A, 2001, vol. 32 A, pp. 2781-94.
5. V. Recina: Mater. Sci. Technol., 2000, vol. 16, pp. 333-40.
6. T. A. Parthasarathy, M. G. Mendiratta, and D. M. Dimiduk: Scripta Mater., 1997, vol. 37(3), pp. 315-21.
7. T. A. Parthasarathy, M. Keller, and M. G. Mendiratta: Scripta Metall., 1998, vol. 38(7), pp. 1025-31.
8. J. Beddoes, L. Zhao, P. Au, D. Dudzinski, and J. Triantafillou: Structural Intermetallics, TMS, Warrendale, PA, 1997, pp. 109-18.
9. W. R. Chen, J. Triantafillou, J. Beddoes, and L. Zhao: Intermetallics, 1999, vol. 7, pp. 171-78.
10. K. Maruyama, R. Yamamoto, H. Nakakuki, and N. Fujitsuna: Mater. Sci. Eng. A, 1997, vols. 239, 240, pp. 419-28.
11. C. E. Wen, K. Yasue, J. G. Lin, Y. G. Zhang, and C. Q. Chen: Intermetallics, 2000, vol. 8, pp. 525-29.
12. H. S. Park, S. K. Hwang, C. M. Lee, Y. C. Yoo, S. N. Nam, and N. J. Kim: Metall. Mater. Trans. A, 2001, vol. 32 A, pp. 251-59.
13. H. Zhu, D. Y. Seo, K. Mayurama, and P. Au: Mater. Sci. Eng. A, 2008, vols. 483-484, pp. 533-36.
14. C. J. Boehlert, D. M. Dimiduk, and K. J. Hemker: Scripta Mater., 2002, vol. 46(4), pp. 259-67.
15. H. Zhu, D. Y. Seo, and P. Au: Scripta Mater., 2006, vol. 54, pp. 1979-84.
16. P. M. Hazzledine and D. M. Dimiduk: Structural Intermetallics, TMS, Warrendale, PA, 1997, pp. 481-87.
17. J. N. Wang and K. Xie: Intermetallics, 2000, vol. 8, pp. 545-48.
18. G. Cao, L. Fu, J. Lin, Y. Zhang, and C. Chen: Intermetallics, 2000, vol. 8, pp. 647-53.
19. Y. H. Lu, Y. G. Zhang, L. J. Qiao, Y. B. Wang, C. Q. Chen, and W. Y. Chu: Intermetallics, 2000, vol. 8, pp. 1443-45.
20. J. Cheng, W. Jianguo, and C. Wenjue: Scripta Metall. Mater., 1995, vol. 32(10), pp. 1579-84.
21. C. J. Boehlert, S. C. Longanbach, and T. R. Bieler: Phil. Mag., 2008, vol. 88(5), pp. 641-64.
22. C. J. Boehlert, C. J. Cowen, S. Tamirisakandala, D. J. McEldowney, and D. B. Miracle: Scripta Mater., 2006, vol. 55, pp. 465-68.
23. C. J. Cowen and C. J. Boehlert: Metall. Mater. Trans. A, 2007, vol. 38 A, pp. 26-34.
24. W. Chen and C. J. Boehlert: Int. J. Fatigue, 2010, vol. 32(5), pp. 799-807.
25. J. E. Hilliard: Metall. Progr, 1964, vol. 78, pp. 99-100.
26. ASTM E112-96e3, Standard Test Methods for Determining Average Grain Size.
27. M. J. Blackburn: The Science, Technology and Application of Titanium, R. I. Jaffe and N. E. Promisel, eds., Pergamon Press, Oxford, UK, 1970, p. 663.
28. D. E. Larsen, S. Kampe, and L. Christodoulou: Mater. Res. Soc. Symp. Proc., 1990, vol. 194, p. 285.
29. R. A. Mirshams, Z. X. Li, and H. P. Mohamadian: J. Mater. Sci. Lett., 1997, vol. 16, pp. 715-18.
30. K. Liu, Y. C. Ma, M. Gao, G. B. Rao, Y. Y. Li, K. Wei, X. Wu, and M. H. Loretto: Intermetallics, 2005, vol. 13, pp. 925-28.
31. Y. H. Wang, J. P. Lin, Y. H. He, Y. L. Wang, and G. L. Chen: J. Alloys Compd., 2009, vol. 468, pp. 505-11.
32. D. Y. Seo, L. Zhao, and J. Beddoes: Mater. Sci. Eng. A, 2002, vols. A329-331, pp. 130-40.
33. A. Couret, G. Molénat, J. Galy, and M. Thomas: Intermetallics, 2008, vol. 16, pp. 1134-41.
34. T. A. Parthasarathy, P. R. Subramanian, M. G. Mendiratta, and D. M. Dimiduk: Acta Mater., 2000, vol. 48, pp. 541-51.
35. M. Hazzledine and B. K. Kad: Mater. Sci. Eng. A, 1995, vol. 192(193), pp. 340-46.
36. H. Inui, M. H. Oh, A. Nakamura, and M. Yamaguchi: Acta Metall. Mater., 1992, vol. 40(11), pp. 3095-104.
37. F. Appel and M. Oehring: GKSS Research Center Geesthacht GmbH, Geesthacht, Germany, Titanium and Titanium Alloys: Fundamentals and Applications, Wiley-VCH, Weinheim, Germany, 2003, pp. 89-152.
38. F. Appel: Intermetallics, 2001, vol. 9, pp. 907-14.
39. T. G. Langdon: Phil. Mag., 1970, vol. 22, pp. 689-700.