The research and motor octane numbers of Liquefied Petroleum Gas (LPG)

Fuel

Volumn 108, Issue , 2013, Pages 797-811

  Morganti, Kai J ^a   Foong, Tien Mun ^a   Brear, Michael J ^a   Da Silva, Gabriel ^a   Yang, Yi ^a   Dryer, Frederick L ^b  

^a UNIVERSITY OF MELBOURNE   (Australia)

^b Princeton University   (United States)

Author keywords

Liquefied petroleum gas; LPG; MON; Octane number; RON

Indexed keywords

ANTIKNOCK RATING; BUTANE; LIQUEFIED PETROLEUM GAS; MIXTURES; PROPYLENE; TESTING;

DEGREE OF NON-LINEARITY; EMPIRICAL MODEL; FUEL QUALITY; ISOBUTANES; LIQUEFIED PETROLEUM GAS (LPG); MOLE FRACTION; STANDARD TEST PROCEDURES; TEST METHOD;

PETROLEUM RESEARCH;

EID: 84876385931     PISSN: 00162361     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.fuel.2013.01.072     Document Type: Article

References (49)

1. Baker P, Watson H. MPI air/fuel mixing for gaseous and liquid LPG. SAE Technical Paper 2005-01-0246. http://dx.doi.org/10.4271/2005-01-0246.
2. Oh S, Lee S, Choi Y, Kang K, Cho J, Cha K. Combustion and emission characteristics in a direct injection LPG/gasoline spark ignition engine. SAE Technical Paper 2010-01-1461. http://dx.doi.org/10.4271/2010-01-1461.
3. Pecqueur M, Ceustermans K, Huyskens P, Savvidis D. Emissions generated from a Suzuki Liane running on unleaded gasoline and LPG under the same load conditions. SAE Technical Paper 2008-01-2637. http://dx.doi.org/10.4271/2008-01- 2637.
4. Shanmugam R, Kankariya N, Honvault J, Srinivasan L, Viswanatha H, Nicolas P, et al. Performance and emission characterization of 1.2L MPI engine with multiple fuels (E10, LPG and CNG). SAE Int J Fuels Lubr 2010;3(1):334-52. http://dx.doi.org/10.4271/2010-01-0740.
5. Watson H, Gowdie D. The systematic evaluation of twelve LP Gas fuels for emissions and fuel consumption. SAE Technical Paper 2000-01-1867. http://dx.doi.org/10.4271/2000-01-1867.
6. Mustovic F. Autogas propulsion systems for automobiles. IBC Engineering and Publishing: Sarajevo, Bosnia and Herzegovina; 2011.
7. Gary J, Handwerk G, Kaiser M. Petroleum refining. 5th ed. Boca Raton, FL: CRC Press; 2007.
8. Lamia N, Wolff L, Leflaive P, Sa Gomes P, Grande C, Rodrigues A. Propane/propylene separation by simulated moving bed I. Adsorption of propane, propylene and isobutane in pellets of 13X Zeolite. Sep Sci Technol 2007;42(12):2539-66. http://dx.doi.org/10.1080/01496390701515219. (Pubitemid 47567310)
9. Braziel R. Impact of shale liquids on regional propane supply. Presented at NPGA Winter Board of Directors Meeting. Key West, FL; January 2012. 〈npga.org/files/public/〉 [accessed 09.12.12].
10. Gist R. Developments in international supply and demand of propane. Presented at NPGA Winter Board of Directors Meeting, Key West, FL; January 2012. 〈npga.org/files/public/〉 [accessed 09.12.12].
11. Hart W. Impact of shale gas development on NGL supplies and petrochemical feedstocks. Presented at South Texas Section of AIChE, Houston, TX; February 2012. 〈aiche.org/resources/chemeondemand/webinars/impact-shale-gas- development-ngl-supplies-and-petrochemical-feedstocks〉 [accessed 09.12.12].
12. True W. Global LPG supply growth responding to high oil prices. Oil Gas J 2012;110(3b):23.
13. European Committee for Standardization. Automotive fuels - LPG - Requirements and test methods, designation EN 589. Brussels, Belgium; 2008.
14. Federal Register of Legislative Instruments. Fuel Standard (Autogas) Determination, Canberra, Australia; 2003. 〈environment.gov.au/atmosphere/ fuelquality/standards/lpg.html〉 [accessed 01.12.12].
15. ASTM International. Standard specification for Liquefied Petroleum (LP) Gases, designation D1835, West Conshohocken, PA; 2011.
16. Falkiner R. Liquefied Petroleum Gas. In: Fuels and lubricants handbook. West Conshohocken, PA: ASTM International; 2003. p. 31-59.
17. ASTM International. Standard test method for knock characteristics of Liquefied Petroleum (LP) gases by the Motor (LP) method, designation D2623. West Conshohocken, PA; 1986.
18. American Petroleum Institute. Knocking characteristics of pure hydrocarbons; API Research Project 45. ASTM International Special Technical Publication No. 225, Philadelphia, PA; 1958.
19. Lovell W, Campbell J, Boyd T. Knocking characteristics of hydrocarbons determined from compression ratios at which individual compounds begin to knock under specified conditions. J Ind Eng Chem 1934;26(10):1105-8. http://dx.doi.org/10.1021/ie50298a019.
20. Lovell W. Knocking characteristics of hydrocarbons. J Ind Eng Chem 1948;40:2388-438. http://dx.doi.org/10.1021/ie50468a033.
21. Puckett A. Knock ratings of gasoline substitutes. J Res Natl Bur Stand 1945;35(4):273-84. http://dx.doi.org/10.6028/jres.035.001.
22. Boldt K. Motor (LP) knock test method development. SAE Technical Paper 670055. http://dx.doi.org/10.4271/670055.
23. The Adept Group Inc., California Air Resources Board Liquefied Petroleum Gas Fuel Blends Evaluation Project; May 1998 Progress Report, Los Angeles, CA; July 1998. 〈arb.ca.gov/fuels/altfuels/lpg/mvlpge/rptmay98.pdf〉 [accessed 03.11.12].
24. The Adept Group Inc., California Air Resources Board Liquefied Petroleum Gas Fuel Blends Evaluation Project; Final Report, Los Angeles, CA; February 2000. 〈adeptgroup.net/Reports/0002hd5report.pdf〉 [accessed 03.11.12].
25. ASTM International. Standard practice for calculation of certain physical properties of Liquefied Petroleum (LP) gases from compositional analysis, designation D2598. West Conshohocken, PA; 2007.
26. Mittal V, Heywood J. The relevance of fuel RON and MON to knock onset in modern SI engines. SAE Technical Paper 2008-01-2414. http://dx.doi.org/10.4271/ 2008-01-2414.
27. Mittal V, Heywood J. The shift in relevance of fuel RON and MON to knock onset in modern SI engines over the last 70 years. SAE Int J Eng 2009;2(2):1-10. http://dx.doi.org/10.4271/2009-01-2622.
28. ASTM International. Standard test method for Motor octane number of spark-ignition engine fuel, designation D2700. West Conshohocken, PA; 2012.
29. ASTM International. Standard test method for Research octane number of spark-ignition engine fuel, designation D2699. West Conshohocken, PA; 2012.
30. Clifford E. Practical guide to LP-Gas utilization. 4th ed. Duluth, MN: Harbrace Publications; 1969.
31. Federal Register of Legislative Instruments. Fuel Standard (Petrol) Determination, Canberra, Australia; 2001. 〈environment.gov.au/atmosphere/ fuelquality/standards/petrol.html〉 [accessed 01.12.12].
32. Becker N. Models for the response of a mixture. J Roy Statist Soc Ser B 1968;30(2):349-58.
33. Dimitrov S, Kamenski D. Binary mixture properties: fitting with canonical rational functions. Comput Chem Eng 1999;23(8):1011-9. http://dx.doi.org/10. 1016/S0098-1354(99)00267-7. (Pubitemid 29435557)
34. Draper N, Pukelsheim F. Mixture models based on homogeneous polynomials. J Statist Plann Inference 1998;71(1-2):303-11. http://dx.doi.org/10.1016/S0378- 3758(98)00012-3. (Pubitemid 128340822)
35. Scheffé H. Experiments with mixtures. J Roy Statist Soc Ser B 1958;20:344-60.
36. Montgomery D. Design and analysis of experiments. 8th ed. Hoboken, NJ: Wiley; 2012.
37. Cornell J. Experiments with mixtures. designs, models, and the analysis of mixture data. 3rd ed. Hoboken, NJ: Wiley; 2002.
38. Minitab Inc., Minitab, version 16.2.2, State College, PA; 2010.
39. Bottenberg R, Ward J. Applied multiple linear regression, technical Report PRL-TDR-63-6, Lackland AFB, San Antonio, TX; 1963.
40. Chow S. Statistical significance: rationale, validity and utility. 1st ed. London, UK: Sage; 1997.
41. Ghosh P, Hickey K, Jaffe S. Development of a detailed gasoline composition-based octane model. Ind Eng Chem Res 2006;45:337-45. http://dx.doi.org/10.1021/ie050811h. (Pubitemid 43075939)
42. 5 and Lighter Hydrocarbons to Gas-Volume, Liquid-Volume, or Mass Basis, designation D2421. West Conshohocken, PA; 2007.
43. Australian Government, Department of Environment and Heritage. Setting national fuel quality standards: proposed standards for Liquefied Petroleum Gas (Autogas). Canberra, Australia; October 2001. 〈environment.gov.au/ atmosphere/fuelquality/publications/pubs/paper5.pdf〉 [accessed 01.12.12].
44. Australian Liquefied Petroleum Gas Association, Liquefied Petroleum Gas for Automotive Use Specification. Sydney, Australia; January 2000.
45. International Organisation for Standardization. Liquefied Petroleum Gases - calculation method for density and vapour pressure, designation ISO 8973. Geneva, Switzerland; 1997.
46. International Organisation for Standardization. Commercial propane and butane - analysis by gas chromatography, designation ISO 7941. Geneva, Switzerland; 1988.
47. Gas Processors Association. Liquefied Petroleum Gas specifications and test methods, designation 2140. Tulsa, OK; 1997.
48. Bradley D, Morley C. Autoignition in spark-ignition engines. In: Comprehensive Chemical Kinetics, vol. 35. Amsterdam, The Netherlands: Elsevier Science B.V.; 1997. p. 661-760.
49. Leppard W. The Chemical Original of Fuel Octane Sensitivity, SAE Technical Paper 902137, 1990.