Mechanical evaluation of nHAp scaffold coated with Poly-3-hydroxybutyrate for bone tissue engineering

Journal of Nanoscience and Nanotechnology

Volumn 13, Issue 2, 2013, Pages 1555-1562

  Foroughi, Mohammad Reza ^a   Karbasi, Saeed ^b   Ebrahimi Kahrizsangi, Reza ^a  

^a ISLAMIC AZAD UNIVERSITY   (Iran)

^b ISFAHAN UNIVERSITY OF MEDICAL SCIENCES   (Iran)

Author keywords

Bone tissue engineering; Hydroxyapatite (HAp); Nanocomposite; Poly 3 hydroxybutyrate (P3HB); Scaffold

Indexed keywords

BONE TISSUE ENGINEERING; HYDROXYAPATITE (HAP); MECHANICAL EVALUATION; OSTEOCHONDRAL TISSUES; POLY-3-HYDROXYBUTYRATE; POLYURETHANE SPONGE; POROUS COMPOSITE SCAFFOLD; POROUS HYDROXYAPATITE;

BIOMECHANICS; BONE; COMPRESSIVE STRENGTH; HISTOLOGY; HYDROXYAPATITE; MECHANICAL PROPERTIES; NANOCOMPOSITES; SCAFFOLDS; TISSUE; TISSUE REGENERATION;

SCAFFOLDS (BIOLOGY);

EID: 84876253884     PISSN: 15334880     EISSN: 15334899     Source Type: Journal    
DOI: 10.1166/jnn.2013.6019     Document Type: Conference Paper

References (55)

1. A. S. Greenwald, S. D. Boden, V. M. Goldberg, Y. Khan, C. T. Laurencin, and R. N. Rosier, J. Bone Joint Surg. Am. 83A, 98103 (2001).
2. F. Yang, J. G. C. Wolke, and J. A. Jansen, Chem. Eng. J. 137, 154 (2008).
3. H. H. Lu, A. Tang, Oh. S. Cheol, J. P. Spalazzi, and K. Dionisio, Biomaterials 26, 6323 (2005).
4. X. Miao, D. Meifang Tan, J. Li, Y. Xiao, and R. Crawford, Acta Biomaterialia 4, 638 (2008).
5. R. Zhang and P. X. Ma, J. Biomed. Mater. Res. 44, 446 (1999).
6. X. Huang and X. Miao, J. Biomater. Appl. 21, 351 (2007).
7. H. W. Kim, J. C. Knowles, and H. E. Kim, J. Biomed. Mater. Res-B 70, 24 (2004).
8. A. J. W. Johnson, J. R. Woodard, A. J. Hilldore, S. K. Lan, C. J. Park, and A. W. Morgan, Biomaterials 28, 45 (2007).
9. X. Miao, L. P. Tan, L. S. Tan, and X. Huang, Mater. Sci. Eng. C 27, 2749 (2007).
10. J. M. Oliveira, M. T. Rodrigues, S. S. Silva, P. B. Malafaya, M. E. Gomes, and C. A. Viegas, Biomaterials 27, 6123 (2006).
11. R. C. Thomson, M. J. Yaszemski, J. M. Powers, and A. G. Mikos, Biomaterials 19, 1935 (1998).
12. A. R. Boccaccini, J. J. Blaker, V. Maquet, R. M. Day, R. Jérôme, Mater. Sci. Eng. C 25, 23 (2005).
13. L. Hench, J. Am. Ceram. Soc. 74, 1487 (1991).
14. A. Sobczak, Z. Kowalski, and Z. Wzorek, Acta of Bioengineering and Biomechanics 11, 23 (2009).
15. S. Pramanik, A. K. Agarwal, and K. N. Rai, Trends Biomater. Artif. Organs. 19, 15 (2005).
16. N. Kivrak and A. C. Tas, J. Am. Ceram. Soc. 81, 22 (1998).
17. A. Balamurugan, S. Kannan, and S. Rajeswari, Trends Biomater. Artif. Organs. 16, 18 (2002).
18. P. Layrolle, A. Ito, and T. Tateishi, J. Am. Ceram. Soc. 81, 1421 (1998).
19. M. Sivakumar, T. S. S. Kumar, K. L. Shantha, and K. P. Rao, Biomaterials 17, 1709 (1996).
20. D. Shi, G. Jiang, and X. Wen, Biomed. Mater. Res. 53, 457 (2000).
21. R. Murugan and K. P. Rao, Trends Biomater. Artif. Organs. 16, 43 (2002).
22. S. Sasikumar and R. Vijayaraghavan, Trends Biomater. Artif. Organs. 19, 70 (2006).
23. K. Prabakaran, A. Balamurugan, and S. Rajeswari, Bull. Mater. Sci. 28, 115 (2005).
24. J. H. G. Rocha, A. F. Lemos, S. Agathopoulos, P. Valério, S. Kannan, F. N. Oktar, and J. M. F. Ferreira, Bone 37, 850 (2005).
25. J. H. G. Rocha, A. F. Lemos, S. Kannan, S. Agathopoulos, and J. M. F. Ferreira, J. Mater. Chem. 15, 5007 (2005).
26. M. K. Herliansyah, E. Pujianto, M. Hamdi, A. Ide-Ektessabi, M. W. Wildan, and A. E. Tontowi, Preparation and characterization of natural hydroxyapatite: Study of X-Ray diffraction result from bovine bone hydroxyapatite and natural gypsum hydroxyapatite, Proceeding of International Seminar on Product Design and Development 2006, ISBN: 979-15577-0-5, Department of Mechanical and Industrial Engineering, Faculty of Engineering, Gadjah Mada University, Yogyakarta, Indonesia, 13-14 December (2006), pp. IX-25-IX-30.
27. Y. W. Chang, N. J. Kim, and C. S. Lee, Mater. Sci. Forum 561, 1441 (2007).
28. C. Y. Ooi, M. Hamdi, and S. Ramesh, Ceram. Int. 33, 1171 (2007).
29. J. A. Toque, M. K. Herliansyah, M. Hamdi, A. Ide-Ektessabi, and M. W. Wildan, The effect of sample preparation and calcination temperature on the production of hydroxyapatite from bovine bone powders, Proceeding of 3rd Kuala Lumpur International Conference on Biomedical Engineering, Biomed 2006, ISBN: 978-3-540-68016-1, ISSN: 1727-1983, Published by Springer-International Federation for Medical and Biological Engineering 2007, Kuala Lumpur, Malaysia, 11-14 December (2006), pp. 147-150.
30. A. Ruksudjarit, K. Pengpat, G. Rujijanagul, and T. Tunkasiri, Curr. Appl. Phys. 8, 270 (2008).
31. E. Akaraonye, T. Keshavarz, and I. Roy, J. Chem. Tech. Biotech. 85, 732 (2010).
32. S. K. Misra, D. Mohn, T. J. Brunner, W. J. Stark, S. E. Philip, and I. Roy, Biomater. 29, 1750 (2008).
33. K. Zhao, Y. Deng, J. Ch. Chen, and G. Q. Chen, Biomaterials 24, 10411045 (2003).
34. Ch. S. Ha and W. J. Cho, Prog. Polym. Sci. 27, 759 (2002).
35. J. C. Knowles, F. A. Mahmud, and G. W. Hastings, Clinical Mater. 8, 155 (1991).
36. H. Hajiali, S. Karbasi, M. Hosseinalipour, and H. Rezaie, J. Mater. Sci. Mater. Med. 21 2125 (2010).
37. R. Zhang and P. X. Ma, J. Biomed. Mater. Res. 44, 446 (1999).
38. X. Huang and X. Miao, J. Biomater. Appl. 21, 351 (2007).
39. H. W. Kim, J. C. Knowles, and H. E. Kim, J. Biomed. Mater. Res. B 70, 240 (2004).
40. J. A. C. Eurell, G. C. Sherrie, M. B. Wheeler, R. D. Jamison, A. J. W. Johnson, Biomaterials 28, 45 (2007).
41. X. Miao, L.-P. Tan, L.-S. Tan, and X. Huang, Mater. Sci. Eng. C 27, 274 (2007).
42. J. M. Oliveira, M. T. Rodrigues, S. S. Silva, P. B. Malafaya, M. E. Gomes, C. A. Viegas, I. R. Dias, J. T. Azevedo, J. F. Mano, and R. L. Reis, Biomaterials 27, 6123 (2006).
43. R. C. Thomson and M. J. Yaszemski, Biomaterials 19, 1935 (1998).
44. A. R. Boccaccini, J. J. Blaker, V. Maquet, R. M. Day, and R. Jérôme, Mater. Sci. Eng. C 25, 23 (2005).
45. A. C. Queiroz, S. Teixeira, J. D. Santos, and F. J. Monteiro, Mater. Sci. Forum 455, 358 (2004).
46. A. C. Queiroz, J. D. Santos, R. Vilar, S. Eugénio, and F. J. Monteiro, Biomaterials 25, 4607 (2004).
47. S. Teixeira, M. P. Ferraz, and F. J. Monteiro, J. Mater. Sci. Mater. Med. 19, 855 (2008).
48. J. O. Hollinger, T. A. Einhorn, B. A. Doll, and Ch. Sfeir, Bone Tissue Engineering, CRC Press, Printed in the United States of America (2005), p. 54.
49. S. Novak, J. Druce, Q. Z. Chen, and A. R. Boccaccini, J. Mater. Sci. 44, 1442 (2009).
50. D. M. F. Tan, X. Miao, J. Li, Y. Xiao, and R. Crawford, J. Biomemetics, Biomater. Tissue Eng. 1, 99 (2008).
51. I. Jun, J. Song, W. Choi, Y. Koh, and H. Kim, J. Am. Ceram Soc. 90, 2703 (2007).
52. O. Bretcanu, Q. Z. Chen, S. K. Misra, A. R. Boccaccini, I. Roy, E. Verne, C. V. Brovarone, Glass Technology-European Journal of Glass Science and Technology Part A 48, 227 (2007).
53. M. R. Panigrahi and S. Panigrahi, Physica B: Condensed Matter. 405, 1787 (2010).
54. M. R. Foroughi, S. Karbasi, and R. Ebrahimi-Kahrizsangi, J. Porous Mater. (2011), doi 10.1007/s10934-011-9518-1.
55. Q. Z. Chen and A. R. Boccaccini, J. Biomed. Mater. Res. A 77, 445 (2006).