Investigating the rheological properties of crumb rubber modified bitumen and its correlation with temperature susceptibility

Materials Research

Volumn 16, Issue 1, 2013, Pages 116-127

  Mashaan, Nuha Salim ^a   Karim, Mohamed Rehan ^a  

^a UNIVERSITY OF MALAYA   (Malaysia)

Author keywords

Blending conditions; CRM; Modified bitumen; Rheology

Indexed keywords

COMPLEX SHEAR MODULUS; CRM; DYNAMIC SHEAR RHEOMETER; MODIFIED BITUMEN; PHYSICAL-MECHANICAL PROPERTIES; RHEOLOGICAL PARAMETER; SUSTAINABLE TECHNOLOGY; TEMPERATURE SUSCEPTIBILITY;

BINDERS; BITUMINOUS MATERIALS; BLENDING; ELASTIC MODULI; ELASTICITY; RHEOLOGY;

RUBBER;

EID: 84876232560     PISSN: 15161439     EISSN: None     Source Type: Journal    
DOI: 10.1590/S1516-14392012005000166     Document Type: Article

References (39)

1. Jeong KD, Lee SJ, Amirkhanian SN and Kim KW. Interaction effect of crumb rubber modified asphalt binder. Construction and Building Materials. 2010; 24:824-831. http://dx.doi.org/10.1016/j.conbuildmat.2009.10.024
2. Tayfur S, Ozen H and Aksoy A. Investigation of rutting performance of asphalt mixtures containing polymer modifiers. Construction and Building Materials. 2007; 21:328-337. http://dx.doi.org/10.1016/j.conbuildmat.2005.08.014
3. Aflaki S and Memarzadeh M. Using two-way ANOVA and hypothesis test in evaluating crumb rubber modification (CRM) agitation effects on rheological properties of bitumen. Construction and Building Materials. 2011; 25:2094-210.http://dx.doi.org/10.1016/j.conbuildmat.2010.11.028
4. Rozeveld SJ, Shin E, Bhurke A, France L and Drzal L. Network morphology of straight and polymer modified asphalt cements. Microscopy Research and Technique. 1997; 38:529-543. http://dx.doi.org/10.1002/(SICI)1097-0029(19970901)
5. Loeber L, Muller G, Morel J and Sutton O. Bitumen in colloid science: a chemical, structure and rheological approach. Fuel. 1998; 77(13):1443-1450. http://dx.doi.org/10.1016/S0016-2361(98)00054-4
6. Van der Poel C. A general system describing the viscoelastic properties of bitumen and its relation to routine test data. Journal of Applied Chemistry. 1954; 4:221-236. http://dx.doi.org/10.1002/jctb.5010040501
7. Fernandes MRS, Forte MMC and Leite LFM. Rheological Evaluation of Polymer-Modified Asphalt Binders. Materials Research. 2008; 11 (3):381-386. http://dx.doi.org/10.1590/S1516-14392008000300024
8. Lougheed TJ and Papagiannakis AT. Viscosity characteristics of rubber-modified asphalt. Journal of Materials in Civil Engineering. 1996; 8(3):153-156. http://dx.doi.org/10.10612F(ASCE)0899-1561(1996)83A3(153)
9. Shen J, Amirkhanian S N, Xiao F and Tang B. Influence of surface area and size of crumb rubber on high temperature properties of crumb rubber and modified binders. Construction and Building Materials. 2009; 23:304-310. http://dx.doi.org/10.1016/j.conbuildmat.2007.12.005
10. Airey GD, Rahman MM and Collop AC. Absorption of bitumen into crumb rubber using the basket drainage method. International Journal of Pavement Engineering. 2003; 4(2):105-119. http://dx.doi.org/10.1080/1029843032000158879
11. Abdelrahman MA and Carpenter SH. Mechanism of interaction of asphalt cement with crumb rubber modifier. Transportation Research Record. 1999; 1661:106-113. http://dx.doi.org/10.3141/1661-15
12. Shen J and Amirkhanian SN. The influence of crumb rubber modifier (CRM) microstructure on the high temperature properties of CRM binder. International Journal of Pavement Engineering. 2005; 6(4):265-271. http://clemson.edu/ces/ arts/low-res-gpav-6-4-137316-265-271.pdf.
13. Lee SJ, Akisetty CK and Amirkhanian SN. The effect of crumb rubber modifier (CRM) on the performance properties of rubberized binder in HMA pavement. Construction and Building Material. 2008; 22:1368-1376. http://dx.doi.org/10.1016/j.conbuildmat.2007.04.010
14. Liu S, Cao W, Fang J and Shang S. Variance analysis and performance evaluation of different crumb rubber modified (CRM) asphalt. Construction and Building Materials. 2009; 23:2701-2708. http://dx.doi.org/10.1016/j.conbuildmat. 2008.12.009
15. Thodesen C, Shatanawi K and Amerkhanian S. Effect of crumb rubber characteristics on crumb rubber modified (CRM) binder viscosity. Construction and Building Materials. 2009; 23:295-303. http://dx.doi.org/10.1016/j. conbuildmat.2007.12.007
16. Huang SC. Rubber concentration on rheology of aged asphalt binders. Journal of Materials in Civil Engineering. 2008; 20(3):221-229. http://dx.doi.org/10.1061/(ASCE)0899-1561(2008)20:3(221)
17. Nejad FM, Aghajani P, Modarres A and Firoozifar H. Investigating the properties of crumb rubber modified bitumen using classic and SHRP testing methods. Construction and Building Materials. 2012; 26:481-489. http://dx.doi.org/10.1016/j.conbuildmat.2011.06.048
18. Mashaan NS, Ali AH, Karim MR and Abdelaziz M. Effect of crumb rubber concentration on the physical and rheological properties of rubberised bitumen binders. International Journal of Physical Science. 2011; 6(4):684-690. http://dx.doi.org/10.5897/IJPS11.113
19. Yildrim Y. Polymer modified asphalt binder. Construction and Building Materials. 2007; 21:66-72. http://dx.doi.org/10.1016/j.conbuildmat.2005.07.007
20. Mashaan NS, Ali AH, Karim MR and Abdelaziz M. Effect of blending time and crumb rubber content on properties of crumb rubber modified asphalt binder. International Journal of Physical Science. 2011; 6(9):2189-2193. http://dx.doi.org/10.5897/IJPS11.446
21. Moreno F, Rubio MC and Martinez-Echevarria MJ. Analysis of digestion time and the crumb rubber percentage in dry-process crumb rubber modified hot bituminous mixes. Construction and Building Materials. 2011; 25:2323-2334. http://dx.doi.org/10.1016/j.conbuildmat.2010.11.029
22. Putman BJ, Thompson JU and Amirkhanian SN. High temperature properties of crumb rubber modified binders. In: Proceedings of the Mairepav 4th International Symposium: Maintenance and Rehabilitation of Pavements and Technological Control; 2005; Belfast, Northern Ireland. Belfast; 2005. p.1-9. Available from: ;http://www.clemson.edu/ces/arts/ MairepavHighTemperaturePropertiesofCRMBinders.pdf.
23. Paulo AAP and Jorge CP. Laboratory optimization of continuous blend asphalt rubber. In: Proceedings of 3rd European Pavement and Asset Management EPAM; 2008; Coimbra. Coimbra; 2008. p.1-12. Available from: ;http:// rodoviasverdes. ufsc.br/files/2010/03/LABORATORY-OPTIMIZATION-OFCONTINUOUS- BLEND-ASPHALT-RUBBER.pdf.
24. Fontes LPTL, Trichês G, Pais JC and Pereira PAA. Evaluating permanent deformation in asphalt rubber mixtures. Construction and Building Materials. 2010; 24:1193-1200. http://dx.doi.org/10.1016/j.conbuildmat.2009.12. 021
25. Wong CC and Wong WG. Effect of crumb rubber modifiers on high temperature susceptibility of wearing course mixtures. Construction and Building Materials. 2007; 21:1741-1745.http://dx.doi.org/10.1016/j.conbuildmat.2006.05.020
26. Celik ON and Atis CD. Compatibility of hot bituminous mixtures made with crumb rubber-modified binders. Construction and Building Materials. 2008; 22:1143-1147.http://dx.doi.org/10.1016/j.conbuildmat.2007.02.005
27. Arabani M, Mirabdolazimi SM and Sasani AR. The effect of waste tire thread mesh on the dynamic behaviour of asphalt mixtures. Construction and Building Materials. 2010; 24:1060-1068. http://dx.doi.org/10.1016/j.conbuildmat. 2009.11.011
28. Xiao F, Zhao PEW and Amirkhanian SN. Fatigue behavior of rubberized asphalt concrete mixtures containing warm asphalt additives. Construction and Building Materials. 2009; 23:3144-3151. http://dx.doi.org/10.1016/j.conbuildmat. 2009.06.036
29. Lee SJ, Amirkhanian SN and Kwon SZ. The effects of compaction temperature on CRM mixtures made with the SGC and the Marshall compactor. Construction and Building Materials. 2008; 22:1122-1128. http://dx.doi.org/10.1016/j.conbuildmat. 2007.03.003
30. Partl MN, Pasquini E, Canestrari F and Virgili A. Analysis of water and thermal sensitivity of open graded asphalt rubber mixtures. Construction and Building Materials. 2010; 24:283-291. http://dx.doi.org/10.1016/j.conbuildmat. 2009.08.041
31. American Society for Testing and Materials -ASTM. ASTM D5: Standard Test Method for Penetration of Bituminous Materials. Easton: ASTM; 1997. vol. 04.03.
32. American Society for Testing and Materials -ASTM. ASTM D 36: Standard Test Method for Softening Point of Bitumen (Ring -And -Ball Apparatus). Easton: ASTM; 2006. vol. 04.04.
33. American Society for Testing and Materials -ASTM. ASTM D4402: Standard Test Method for Viscosity Determinations of Unfilled Asphalts Using the Brookfield Thermosel Apparatus. Easton: ASTM; 2006. vol. 04.04.
34. American Society for Testing and Materials -ASTM. ASTM D113: Standard Test Method for Ductility of Bituminous Materials. Easton: ASTM; 2000. vol. 04.03.
35. American Society for Testing and Materials -ASTM. ASTM D 6084: Standard Test Method for Elastic Recovery of Bituminous Materials by Ductilometer. Easton: ASTM; 2006. vol. 04.03.
36. American Society for Testing and Materials -ASTM. ASTM D-4: Proposal P246 Determining the Rheological Properties of Asphalt binder for specification Purposes Using a Dynamic Shear Rheometer. Easton: ASTM; 2000. vol. 04.03.
37. Widyatmoko I and Elliott R. Characteristics of elastomeric and plastomeric binders in contact with natural asphalts. Construction and Building Materials. 2008; 22:239-249. http://dx.doi.org/10.1016/j.conbuildmat.2005.12.025
38. Kumar SA and Veeraragavan A. Dynamic mechanical characterization of asphalt concrete mixes with modified asphalt binders. Materials Science and Engineering A. 2011; 528:6445-6454. http://dx.doi.org/10.1016/j.msea.2011.05.008
39. Xiao F, Ameirkhanian SN and Putman, BJ. Laboratory investigation of dimensional changes of crumb rubber reacting with asphalt binder. In: Proceeding Asphalt Rubber 2006 Conference; 2006; Palms Spring, California. Palms Spring; 2006.