Dynamic models and design of spindle-bearing systems of machine tools: A review

International Journal of Precision Engineering and Manufacturing

Volumn 14, Issue 3, 2013, Pages 513-521

  Lin, Chi Wei ^a   Lin, Yang Kuei ^a   Chu, Chih Hsing ^b  

^a FENG CHIA UNIVERSITY   (Taiwan)

^b NATIONAL TSING HUA UNIVERSITY   (Taiwan)

Author keywords

Dynamic models; Literature review; Machine tools; Spindle bearing system

Indexed keywords

DYNAMIC MODELS; MACHINE TOOLS; TURING MACHINES;

DIMENSIONAL ACCURACY; DYNAMIC CHARACTERISTICS; LITERATURE REVIEWS; PHYSICAL COMPONENTS; SPINDLE SHAFT; SPINDLE-BEARING SYSTEM; SURFACE FINISHES;

BEARINGS (MACHINE PARTS);

EID: 84875933949     PISSN: 22347593     EISSN: 20054602     Source Type: Journal    
DOI: 10.1007/s12541-013-0070-6     Document Type: Review

References (69)

1. Abele, E., Altintas, Y., and Brecher, C., "Machine Tool Spindle Units," CIRP Annals-Manufacturing Technology, Vol. 59, No. 2, pp. 781-802, 2010.
2. Abukhshim, N. A., Mativenga, P. T., and Sheikh, M. A., "Heat Generation and Temperature Prediction in Metal Cutting: A Review and Implications for High Speed Machining," International Journal of Machine Tools and Manufacture, Vol. 46, No. 7, pp. 782-800, 2006.
3. Aktürk, N., Uneeb, M., and Gohar, R., "The Effects of Number of Balls and Preload on Vibrations Associated with Ball Bearings," Journal of Tribology, Vol. 119, pp. 747-753, 1997.
4. Akturk, N., "Some Characteristic Parameters Affecting the Natural Frequency of a Rotating Shaft Supported by Defect-Free Ball Bearings," Proceedings of the Institution of Mechanical Engineers, Part K: Journal of Multi-body Dynamics, Vol. 217, No. 2, pp. 145-151, 2003.
5. Alfares, M. A. and Elsharkawy, A. A., "Effects of Axial Preloading of Angular Contact Ball Bearings on the Dynamics of a Grinding Machine Spindle System," Journal of Materials Processing Technology, Vol. 136, No. 1, pp. 48-59, 2003.
6. Altintas, Y. and Cao, Y., "Virtual Design and Optimization of Machine Tool Spindles," CIRP Annals-Manufacturing Technology, Vol. 54, No. 1, pp. 379-382, 2005.
7. Bossmanns, B. and Tu, J. F., "A Thermal Model for High Speed Motorized Spindles," International Journal of Machine Tools and Manufacture, Vol. 39, No. 9, pp. 1345-1366, 1999.
8. Bossmanns, B. and Tu, J. F., "A Power Flow Model for High Speed Motorized Spindles-Heat Generation Characterization," Journal of Manufacturing Science and Engineering, Vol. 123, pp. 494-505, 2001.
9. Cao, H., Holkup, T., and Altintas, Y., "A Comparative Study on the Dynamics of High Speed Spindles with Respect to Different Preload Mechanisms," The International Journal of Advanced Manufacturing Technology, Vol. 57, pp. 871-883, 2011.
10. Cao, H., Li, B., and He, Z., "Chatter Stability of Milling with Speed-Varying Dynamics of Spindles," International Journal of Machine Tools and Manufacture, Vol. 52, No. 1, pp. 50-58, 2012.
11. Cao, Y. and Altintas, Y., "A General Method for the Modeling of Spindle-Bearing Systems," Journal of Mechanical Design, Vol. 126, pp. 1089-1104, 2004.
12. Cao, Y. and Altintas, Y., "Modeling of Spindle-Bearing and Machine Tool Systems for Virtual Simulation of Milling Operations," International Journal of Machine Tools and Manufacture, Vol. 47, No. 9, pp. 1342-1350, 2007.
13. Chen, C. H., Wang, K. W., and Shin, Y. C., "An Integrated Approach toward the Dynamic Analysis of High-Speed Spindles: Part I-System Model," Journal of Vibration and Acoustics, Vol. 116, pp. 506-513, 1994.
14. Chen, J. S. and Hwang, Y. W., "Centrifugal Force Induced Dynamics of a Motorized High-Speed Spindle," The International Journal of Advanced Manufacturing Technology, Vol. 30, No. 1, pp. 10-19, 2006.
15. Choi, B. K. and Yang, B. S., "Optimal Design of Rotor-Bearing Systems Using Immune-Genetic Algorithm," Journal of Vibration and Acoustics, Vol. 123, pp. 398-401, 2001.
16. El-Saeidy, F. M. A., "Time-Varying Total Stiffness Matrix of a Rigid Machine Spindle-Angular Contact Ball Bearings Assembly: Theory and Analytical/Experimental Verifications," Shock and Vibration, Vol. 18, No. 5, pp. 641-670, 2011.
17. Ertürk, A., Özgüven, H. N., and Budak, E., "Analytical Modeling of Spindle-Tool Dynamics on Machine Tools Using Timoshenko Beam Model and Receptance Coupling for the Prediction of Tool Point FRF," International Journal of Machine Tools and Manufacture, Vol. 46, No. 15, pp. 1901-1912, 2006.
18. Gagnol, V., Bouzgarrou, B. C., Ray, P., and Barra, C., "Stability-Based Spindle Design Optimization," Journal of Manufacturing Science and Engineering, Vol. 129, pp. 407-415, 2007.
19. Gagnol, V., Bouzgarrou, B. C., Ray, P., and Barra, C., "Dynamic Analyses and Design Optimization of High-Speed Spindle-Bearing System," Advances in Integrated Design and Manufacturing in Mechanical Engineering II, pp. 505-518, 2007.
20. Gao, S. H., Meng, G., and Long, X. H., "Stability Prediction in High-Speed Milling Including the Thermal Preload Effects of Bearing," Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, Vol. 224, No. 1, pp. 11-22, 2010.
21. Gunduz, A., Dreyer, J. T., and Singh, R., "Effect of Bearing Preloads on the Modal Characteristics of a Shaft-Bearing Assembly: Experiments on Double Row Angular Contact Ball Bearings," Mechanical Systems and Signal Processing, Vol. 31, pp. 176-195, 2012.
22. Guo, Y. and Parker, R. G., "Stiffness Matrix Calculation of Rolling Element Bearings Using a Finite Element/Contact Mechanics Model," Mechanism and Machine Theory, Vol. 51, pp. 32-45, 2012.
23. Hagiu, G. D. and Gafitanu, M. D., "Dynamic Characteristics of High Speed Angular Contact Ball Bearings," Wear, Vol. 211, No. 1, pp. 22-29, 1997.
24. Harris, T. A., "Rolling Bearing Analysis," Wiley-Interscience, New York, 2001.
25. Hernot, X., Sartor, M., and Guillot, J., "Calculation of the Stiffness Matrix of Angular Contact Ball Bearings by Using the Analytical Approach," Journal of Mechanical Design, Vol. 122, pp. 83-90, 2000.
26. Holkup, T., Cao, H., Koláø, P., Altintas, Y., and Zelený, J., "Thermo-Mechanical Model of Spindles," CIRP Annals-Manufacturing Technology, Vol. 59, No. 1, pp. 365-368, 2010.
27. Jedrzejewski, J. and Kwasny, W., "Modelling of Angular Contact Ball Bearings and Axial Displacements for High-Speed Spindles," CIRP Annals-Manufacturing Technology, Vol. 59, No. 1, pp. 377-382, 2010.
28. Jiang, S. and Mao, H., "Investigation of Variable Optimum Preload for a Machine Tool Spindle," International Journal of Machine Tools and Manufacture, Vol. 50, No. 1, pp. 19-28, 2010.
29. Jiang, S. and Zheng, S., "Dynamic Design of a High-Speed Motorized Spindle-Bearing System," Journal of Mechanical Design, Vol. 132, Paper No. 034501, 2010.
30. Jones, A. B., "A General Theory for Elastically Constrained Ball and Radial Roller Bearings under Arbitrary Load and Speed Conditions," Journal of Basic Engineering, Vol. 82, pp. 309-320, 1960.
31. Jorgensen, B. R. and Shin, Y. C., "Dynamics of Spindle-Bearing Systems at High Speeds Including Cutting Load Effects," Journal of Manufacturing Science and Engineering, Vol. 120, pp. 387-394, 1998.
32. Kang, Y., Chang, Y. P., Tsai, J. W., Chen, S. C., and Yang, L. K., "Integrated "Cae" Strategies for the Design of Machine Tool Spindle-Bearing Systems," Finite Elements in Analysis and Design, Vol. 37, No. 6, pp. 485-511, 2001.
33. Kang, Y., Huang, C. C., Lin, C. S., Shen, P. C., and Chang, Y. P., "Stiffness Determination of Angular-Contact Ball Bearings by Using Neural Network," Tribology International, Vol. 39, No. 6, pp. 461-469, 2006.
34. Karacay, T. and Akturk, N., "Vibrations of a Grinding Spindle Supported by Angular Contact Ball Bearings," Proceedings of the Institution of Mechanical Engineers, Part K: Journal of Multi-body Dynamics, Vol. 222, No. 1, pp. 61-75, 2008.
35. Kim, S. M. and Lee, S. K., "Prediction of Thermo-Elastic Behavior in a Spindle-Bearing System Considering Bearing Surroundings," International Journal of Machine Tools and Manufacture, Vol. 41, No. 6, pp. 809-831, 2001.
36. Kim, S. M., Lee, K. J., and Lee, S. K., "Effect of Bearing Support Structure on the High-Speed Spindle Bearing Compliance," International Journal of Machine Tools and Manufacture, Vol. 42, No. 3, pp. 365-373, 2002.
37. Kim, S. M. and Lee, S. K., "Spindle Housing Design Parameter Optimization Considering Thermo-Elastic Behaviour," The International Journal of Advanced Manufacturing Technology, Vol. 25, No. 11, pp. 1061-1070, 2005.
38. Lee, D. S. and Choi, D. H., "Reduced Weight Design of a Flexible Rotor with Ball Bearing Stiffness Characteristics Varying with Rotational Speed and Load," Journal of Vibration and Acoustics, Vol. 122, No. 3, pp. 203-208, 2000.
39. Li, H. and Shin, Y. C., "Analysis of Bearing Configuration Effects on High Speed Spindles Using an Integrated Dynamic Thermo-Mechanical Spindle Model," International Journal of Machine Tools and Manufacture, Vol. 44, No. 4, pp. 347-364, 2004.
40. Li, H. and Shin, Y. C., "Integrated Dynamic Thermo-Mechanical Modeling of High Speed Spindles, Part 1: Model Development," Journal of Manufacturing Science and Engineering, Vol. 126, No. 1, pp. 148-158, 2004.
41. Lin, C. W., Tu, J. F., and Kamman, J., "An Integrated Thermo-Mechanical-Dynamic Model to Characterize Motorized Machine Tool Spindles During Very High Speed Rotation," International Journal of Machine Tools and Manufacture, Vol. 43, No. 10, pp. 1035-1050, 2003.
42. Lin, C. W. and Tu, J. F., "Model-Based Design of Motorized Spindle Systems to Improve Dynamic Performance at High Speeds," Journal of Manufacturing Processes, Vol. 9, No. 2, pp. 94-108, 2007.
43. Lin, C. W., "An Application of Taguchi Method on the High-Speed Motorized Spindle System Design," Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Vol. 225, No. 9, pp. 2198-2205, 2011.
44. Zhou, D., Wu, L., and Xiao, Y., "Comprehensive measurement and evaluation system of high-speed motorized spindle," Frontiers of Mechanical Engineering, Vol. 6, No. 2, pp. 263-269, 2011.
45. Lin, C. W., "Simultaneous Optimal Design of Parameters and Tolerance of Bearing Locations for High-Speed Machine Tools Using a Genetic Algorithm and Monte Carlo Simulation Method," Int. J. Precis. Eng. Manuf., Vol. 13, No. 11, pp. 1983-1988, 2012.
46. Lin, Y. H. and Lin, S. C., "Optimal Weight Design of Rotor Systems with Oil-Film Bearings Subjected to Frequency Constraints," Finite Elements in Analysis and Design, Vol. 37, No. 10, pp. 777-798, 2001.
47. Mane, I., Gagnol, V., Bouzgarrou, B., and Ray, P., "Stability-Based Spindle Speed Control During Flexible Workpiece High-Speed Milling," International Journal of Machine Tools and Manufacture, Vol. 48, No. 2, pp. 184-194, 2008.
48. Min, X., Shuyun, J., and Ying, C., "An Improved Thermal Model for Machine Tool Bearings," International Journal of Machine Tools and Manufacture, Vol. 47, No. 1, pp. 53-62, 2007.
49. Montusiewicz, J. and Osyczka, A., "Computer Aided Optimum Design of Machine Tool Spindle Systems with Hydrostatic Bearings," Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, Vol. 211, No. 1, pp. 43-51, 1997.
50. Movahhedy, M. R. and Gerami, J. M., "Prediction of Spindle Dynamics in Milling by Sub-Structure Coupling," International Journal of Machine Tools and Manufacture, Vol. 46, No. 3, pp. 243-251, 2006.
51. Movahhedy, M. R. and Mosaddegh, P., "Prediction of Chatter in High Speed Milling Including Gyroscopic Effects," International Journal of Machine Tools and Manufacture, Vol. 46, No. 9, pp. 996-1001, 2006.
52. Nakajima, K., "Thermal Contact Resistance between Balls and Rings of Bearings under Axial, Radial and Combined Loads," Journal of Thermophysiscs and Heat Transfer, Vol. 9, No. 1, pp. 88-95, 1995.
53. Namazi, M., Altintas, Y., Abe, T., and Rajapakse, N., "Modeling and Identification of Tool Holder-Spindle Interface Dynamics," International Journal of Machine Tools and Manufacture, Vol. 47, No. 9, pp. 1333-1341, 2007.
54. Nelson, H. D., "A Finite Rotating Shaft Element Using Timoshenko Beam Theory," Journal of Mechanical Design, Vol. 102, No. 4, pp. 793-803, 1980.
55. Özsahin, O., Ertürk, A., Özgüven, H. N., and Budak, E., "A Closed-Form Approach for Identification of Dynamical Contact Parameters in Spindle-Holder-Tool Assemblies," International Journal of Machine Tools and Manufacture, Vol. 49, No. 1, pp. 25-35, 2009.
56. Quintana, G. and Ciurana, J., "Chatter in Machining Processes: A Review," International Journal of Machine Tools and Manufacture, Vol. 51, No. 5, pp. 363-376, 2011.
57. Rantatalo, M., Aidanpää, J. O., Göransson, B., and Norman, P., "Milling Machine Spindle Analysis Using Fem and Non-Contact Spindle Excitation and Response Measurement," International Journal of Machine Tools and Manufacture, Vol. 47, No. 7, pp. 1034-1045, 2007.
58. Schmitz, T. L. and Donalson, R. R., "Predicting High-Speed Machining Dynamics by Substructure Analysis," CIRP Annals-Manufacturing Technology, Vol. 49, No. 1, pp. 303-308, 2000.
59. Shin, Y. C., "Bearing Nonlinearity and Stability Analysis in High Speed Machining," Journal of Engineering for Industry, Vol. 114, No. 1, pp. 23-30, 1992.
60. Smith, S., Jacobs, T., and Halley, J., "The Effect of Drawbar Force on Metal Removal Rate in Milling," CIRP Annals-Manufacturing Technology, Vol. 48, No. 1, pp. 293-296, 1999.
61. Srinivasan, S., Maslen, E. H., and Barrett, L. E., "Optimization of Bearing Locations for Rotor Systems with Magnetic Bearings," Journal of Engineering for Gas Turbines and Power, Vol. 119, pp. 464-468, 1997.
62. Stein, J. L. and Tu, J. F., "A State-Space Model for Monitoring Thermally Induced Preload in Anti-Friction Spindle Bearings of High-Speed Machine Tools," Journal of Dynamic Systems, Measurement, and Control, Vol. 116, pp. 372-386, 1994.
63. Tang, W. X., Song, Q. H., Yu, S. Q., Sun, S. S., Li, B. B., Du, B., and Ai, X., "Prediction of Chatter Stability in High-Speed Finishing End Milling Considering Multi-Mode Dynamics," Journal of Materials Processing Technology, Vol. 209, No. 5, pp. 2585-2591, 2009.
64. Tu, J. F. and Stein, J. L., "On-Line Preload Monitoring for Anti-Friction Spindle Beatings of High-Speed Machine Tools," Journal of Dynamic Systems, Measurement, and Control, Vol. 117, No. 1-2, pp. 43-53, 1995.
65. Tu, J. F. and Stein, J. L., "Model Error Compensation for Bearing Temperature and Preload Estimation," Journal of Dynamic Systems, Measurement, and Control, Vol. 118, No. 3, pp. 580-585, 1996.
66. Tu, J. F. and Stein, J. L., "Active Thermal Preload Regulation for Machine Tool Spindles with Rolling Element Bearings," Journal of Manufacturing Science and Engineering, Vol. 118, pp. 499-505, 1996.
67. Wang, B. P. and Chen, J. L., "Application of Genetic Algorithm for the Support Location Optimization of Beams," Computers & Structures, Vol. 58, No. 4, pp. 797-800, 1996.
68. Wang, W. R. and Chang, C. N., "Dynamic Analysis and Design of a Machine Tool Spindle-Bearing System," Journal of Vibration and Acoustics, Vol. 116, pp. 280-285, 1994.
69. Wu, B. C., Young, G. S., and Huang, T. Y., "Application of a Two-Level Optimization Process to Conceptual Structural Design of a Machine Tool," International Journal of Machine Tools and Manufacture, Vol. 40, No. 6, pp. 783-794, 2000.