Characterization of date palm lignocellulosic by-products and self-bonded composite materials obtained thereof

Materials and Design

Volumn 50, Issue , 2013, Pages 302-308

  Saadaoui, Nabila ^a,b   Rouilly, Antoine ^b   Fares, Khalid ^a   Rigal, Luc ^b  

^a FACULTÉ DES SCIENCES SEMLALIA   (Morocco)

^b UNIVERSITÉ DE TOULOUSE   (France)

Author keywords

Date palm tree by products; Particleboard composites; Self bonded materials; Thermopressing

Indexed keywords

CHARACTERIZATION; FORESTRY; PARTICLE BOARD; SWELLING;

CHEMICAL COMPOSITIONS; DATE PALM; DYNAMICAL MECHANICAL ANALYSIS; JAPANESE INDUSTRIAL STANDARDS; MORPHOLOGICAL PROPERTIES; NEUTRAL DETERGENT FIBER; THERMOPRESSING; THICKNESS SWELLING;

FIBER BONDING;

BYPRODUCTS; COMPOSITES; FIBER BONDING; FORESTRY; PARTICLE BOARDS; SWELLING; TREES;

EID: 84875853159     PISSN: 02641275     EISSN: 18734197     Source Type: Journal    
DOI: 10.1016/j.matdes.2013.03.011     Document Type: Article

References (44)

1. Halvarsson S., Edlund H., Norgren M. Manufacture of non-resin wheat straw fiberboards. Ind Crop Prod 2009, 29:437-445.
2. Alvarez C., Rojano B., Almaza O., Rojas O.J., Gañán P. Self-bonding boards from plantain fiber bundles after enzymatic treatment: adhesion improvement of lignocellulosic products by enzymatic pre-treatment. J Polym Environ 2011, 19:182-188.
3. Wang D., Sun X.S. Low density particleboard from wheat straw and corn pith. Ind Crop Prod 2002, 15:43-50.
4. Raquez J.M., Deléglise M., Lacrampe M.F., Krawczak P. Thermosetting (bio) materials derived from renewable resources: a critical review. Prog Polym Sci 2010, 35:487-509.
5. Van Dam J.E.G., Van den Oever M.J.A., Teunissen W., Keijsers E.R.P., Peralta A.G. Process for production of high density/high performance binderless boards from whole coconut husk: Part 1. Lignin as intrinsic thermosetting binder resin. Ind Crop Prod 2004, 19:207-216.
6. Widyorini R., Xu J., Umemura K., Kawai S. Manufacture and properties of binderless particleboard from bagasse I: effect of raw material type, storage methods, and manufacturing process. J Wood Sci 2005, 51:648-654.
7. Kriker A., Debicki G., Bali A., Khenfer M.M., Chabannet M. Mechanical properties of date palm fibres and concrete reinforced with date palm fibres in hot-dry climate. Cem Concr Compos 2005, 2:554-564.
8. Agoudjil B., Benchabane A., Boudenne A., Ibos L., Fois M. Renewable materials to reduce building heat loss: characterization of date palm wood. Energy Build 2011, 43:491-497.
9. Al-Kaabi K., Al-Khanbashi A., Hammami A. Date palm fibers as polymeric matrix reinforcement: DPF/polyester composite properties. Polym Compos 2005, 26:604-613.
10. Zouine J. Embryogenèse somatique chez Phoenix dactylifera L.: amélioration des conditions de culture et étude de paramètres biochimiques impliqués dans la multiplication, la maturation et la germination des embryons somatiques. Thesis, Université Cadi Ayyad de Marrakech, Maroc; 2007.
11. Al-Sulaiman F.A. Date palm fibre reinforced composite as a new insulating material. Int J Energy Res 2003, 27:1293-1297.
12. Kaddami H., Dufresne A., Khelifi B., Bendahou A., Taourirte M., Raihane M., et al. Short palm tree fibers - thermoset matrices composites. Composites Part A 2006, 37:1413-1422.
13. Sbiai A., Maazouz A., Fleury E., Sautereau H., Kaddami H. Short date palm tree fibers/polyepoxy composites prepared using RTM process: effect of tempo mediated oxidation of the fibers. Bioresources 2010, 5:672-689.
14. Riahi K., Ben Mammou A., Ben Thayer B. Date-palm fibers media filters as a potential technology for tertiary domestic wastewater treatment. J Hazard Mater 2009, 161:608-613.
15. Khiari R., Dridi-Dhaouadi S., Aguir C., Mhenni M.F. Experimental evaluation of eco-friendly flocculants prepared from date palm rachis. J Environ Sci 2010, 22:1539-1543.
16. NF V 18-100. Animal feeding stuffs - determination of nitrogen for the calculation of crude protein content; 1977.
17. NF V 03-908. Oilseeds - determination of oil content - alternative method; 2009.
18. Van Soest P.J., Wine R.H. Use of detergents in the analysis of fibrous feeds: IV. Determination of plant cell wall constituents. J Assoc Off Anal Chem 1967, 50:50-55.
19. Van Soest P.J., Wine R.H. Determination of lignin and cellulose in acid detergent fiber with permanganate. J Assoc Off Anal Chem 1968, 51(4):780-784.
20. NF EN 310. Wood-based panels - determination of modulus of elasticity in bending and bending strength; 1993.
21. NF EN 319. Particleboards and fibreboards - determination of tensile strength perpendicular to the plane of the board; 1993.
22. NF EN 317. Particleboards and fibreboards - determination of swelling in thickness after immersion in water; 1993.
23. Hashim R., Nadhari W.N.A., Sulaiman O., Kawamura F., Hiziroglu S., Sato M., et al. Characterization of raw materials and manufactured binderless particleboard from oil palm biomass. Mater Des 2011, 32:246-254.
24. Okuda N., Hori K., Sato M. Chemical changes of kenaf core binderless boards during hot pressing (II): effects on the binderless board properties. J Wood Sci 2006, 52:249-254.
25. Bendahou A., Dufresne A., Kaddamin H., Habibi Y. Isolation and structural characterization of hemicelluloses from palm of Phoenix dactylifera L. Carbohyd Polym 2007, 68:601-608.
26. Khiari R., Mhenni M.F., Belgacem M.N., Mauret E. Chemical composition and pulping of date palm rachis and Posidonia oceanica - a comparison with other wood and non-wood fibre sources. Bioresour Technol 2010, 101:775-780.
27. Hashim R., How L.S., Sulaiman O., Yamamoto K. Effect of extractive removal on dimensional stability and bonding properties of particleboard made from hybrid of Acacia. J I Wood Sci 2001, 15:261-265.
28. Velasquez J.A., Ferrando F., Salvado J. Binderless fiberboard from steam exploded Miscanthus sinensis: the effect of a grinding process. Eur J Wood Wood Prod 2002, 60:297-302.
29. Frybort S., Mauritz R., Teischinger A., Muller U. Cement bonded composites - a mechanical review. Bioresources 2008, 3:602-626.
30. Sumardi I., Ono K., Suzuki S. Effect of board density and layer structure on the mechanical properties of bamboo oriented strandboard. J Wood Sci 2007, 53:510-515.
31. Hashim R., Nadhari W.N.A., Sulaiman O., Sato M., Hiziroglu S., Kawamura F., et al. Properties of binderless particleboard panels manufactured from oil palm biomass. Bioresources 2012, 7:1352-1365.
32. JIS - A 5908. Particleboards. Tokyo (Japan): Japanese Standards Association; 2003. p. 1-24.
33. FN EN 312. Particleboards - requirements; 2010.
34. Salvado J., Velasquez J.A., Ferrando F. Binderless fiberboard from steam exploded Miscanthus sinensis: optimization of pressing and pretreatment conditions. Wood Sci Technol 2003, 37:279-286.
35. Widyorini R., Xu J., Watanabe T., Kawai S. Chemical changes in steam-pressed kenaf core binderless particleboard. J Wood Sci 2005, 51:26-32.
36. Marashdeh M.W., Hashim R., Tajuddin A., Bauk S., Sulaiman O. Effect of particle size on the characterization of binderless particleboard made from Rhizophora spp. mangrove wood for use as phantom material. Bioresources 2011, 6(4):4028-4444.
37. Widsten P., Kandelbauer A. Adhesion improvement of lignocellulosic products by enzymatic pre-treatment. Biotechnol Adv 2008, 26:379-386.
38. Evon P., Vandenbossche V., Rigal L. Manufacturing of renewable and biodegradable fiberboards from cake generated during biorefinery of sunflower whole plant in twin-screw extruder: influence of thermo-pressing conditions. Polym Degrad Stab 2012, 97:1940-1947.
39. Birkinshaw C., Buggy M., Henn G.G. Dynamic mechanical analysis of wood. J Mater Sci Lett 1986, 5:898-900.
40. Rouilly A., Geneau-Sbartaï C., Rigal L. Thermo-mechanical processing of sugar beet pulp: III. Study of extruded films improvement with various plasticizers and cross-linkers. Bioresour Technol 2009, 100:3076-3081.
41. Okuda N., Sato M. Water resistance properties of kenaf core binderless boards. J Wood Sci 2006, 52:422-428.
42. Tran NH. Transformation de la biomasse aérienne de Miscanthus giganteus: aptitude à la dégradation enzymatique et valorisation des coproduits en agro-matériaux. Thesis, Université de Picardie Jules Verne d'Amiens, France; 2011.
43. Okuda N., Hori K., Sato M. Chemical changes of kenaf core binderless boards during hot pressing (I): influence of the pressing temperature condition. J Wood Sci 2006, 52:244-248.
44. Hashim R., Said N., Lamaming J., Baskaran M., Sulaiman O., Sato M., et al. Influence of press temperature on the properties of binderless particleboard made from oil palm trunk. Mater Des 2011, 32:2520-2525.