Cement bonded composites - A mechanical review

BioResources

Volumn 3, Issue 2, 2008, Pages 602-626

  Frybort, Stephan ^a   Mauritz, Raimund ^c   Teischinger, Alfred ^a,b   Müller, Ulrich ^c  

^a KOMPETENZZENTRUM HOLZ GMBH   (Austria)

^b UNIVERSITY OF NATURAL RESOURCES AND LIFE SCIENCES   (Austria)

^c Doka GmbH   (Austria)

Author keywords

Bonding; Cement bonded composites; Cement wood ratio; Excelsior; Failure mechanism; Mechanical properties; Orientation; Particle geometry; Particle size; Strand

Indexed keywords

EXCELSIOR; FAILURE MECHANISM; ORIENTATION; PARTICLE GEOMETRY; STRAND;

BIOCHEMISTRY; BIODEGRADATION; CEMENTS; COMPUTATIONAL GEOMETRY; DIMENSIONAL STABILITY; MECHANICAL PROPERTIES; PARTICLE SIZE; WOOD;

MECHANISMS;

BIOCHEMISTRY; BIODEGRADATION; BONDING; COMPOSITES; DIMENSIONAL STABILITY; FAILURE; MECHANICAL PROPERTIES; PARTICLE SIZE; WOOD;

EID: 64749095875     PISSN: None     EISSN: 19302126     Source Type: Journal    
DOI: None     Document Type: Review

References (145)

1. Ahn, W. Y., and Moslemi, A. A. (1980). "SEM examination of wood-Portland cement bonds," Wood Sci. 13, 77-82.
2. Al Rim, K., Ledhem, A., Douzane, O., Dheilly, R. M., and Queneudee, M. (1999). "Influence of the proportion of wood on the thermal and mechanical performances of clay-cement-wood composites," Cement Concrete Comp. 21, 269-276.
3. Alberto, M. M., Mougel, E., and Zoulalian, A. (2000). "Compatibility of some tropical hardwood species with Portland cement using isothermal calorimetry," Forest Prod. J. 50, 83-88.
4. Anonymus. (2005). "EltoBoard Test Results," Moscow State Forestry University, 10.
5. Anonymus. (2007). "Wichtigste technische Eigenschaften der zementgebundenen Spanplatten CETRIS®," http://www.cetris.cz /pdf/PPP_DE_03.pdf 24.09.2007 (In German)
6. Avellar, B. K., and Glasser, W. G. (1998). "Steam assisted biomass fractionation. I. Process consideration and economic evaluation," Biomass Bioenergy 14, 205-218.
7. Backe, K. R., Lile, O. B., and Lyomov, S. K. (2001). "Characterizing curing cement slurries by electrical conductivity," SPE Drill Completion 16(4), 201-207.
8. Badejo, S. O. J. (1988). "Effect of flake geometry on properties of cement-bonded particleboard from mixed tropical hardwoods," Wood Sci. Technol. 22, 357-370.
9. Bejó, L., Takáts, P., and Vass, N. (2005). "Development of cement bonded composite beams," Acta Silv. Lign. Hung. 1, 111-119.
10. Bietz, H., and Uschmann, W. (1984). "Zum Verfestigungsverhalten von Holz-Zement-Verbunden beim Einsatz von Holzresten," Holztechnologie 25(3), 116-118. (In German)
11. Brandstetr, J., Polcer, J., Krátký, J., Holesinský, R., and Havlica, J. (2001). "Possibilities of the use of isoperibolic calorimetry for assessing the hydration behaviour of cementitious systems," Cement Concrete Res. 31, 941-947.
12. Cabangon, R. J., Cunningham, R. B., and Evans, P. D. (2002). "Manual strand orientation as a means of improving the flexural properties of wood-wool cement boards in the Philippines," Forest Prod. J. 52(4), 53-59.
13. Chapman, J. A., Farris, S. H., and Kinghorn, J. M. (1963). "Douglas-fir sapwood starch in relation to log attack by the ambrosia beetle, Trypodendron," Forest Sci. 9, 430-439.
14. Coutts, R. S. P., and Kightly, P. (1982). "Microstructure of autoclaved refined wood-fibre cement mortars," J. Mater Sci. 17, 1801-1806.
15. Coutts, R. S. P., and Kightly, P. (1984). "Bonding in wood fibre-cement composites," J. Mater Sci. 19, 3355-3359.
16. Cziesielski, E. (1975). "Beton mit Fasern aus Holz," Holz Roh Werkst. 33, 303-307.
17. Datye, K. R., and Gore, V. N. (1998). "Innovative designs of wood-bamboo-brick composites," 5th World Conference on Timber Engineering, Montreux, Switzerland, 526-533, 1998.
18. Davies, G. W., Campbell, M. D., and Coutts, R. S. P. (1981). "A S.E.M. study of wood fibre reinforced cement composites," Holzforschung 35, 201-204.
19. Dewitz, K., Kuschy, B., and Otto, T. (1984). "Stofftransporte bei der Abbindung zementgebundener Holzwerkstoffe," Holztechnologie 3, 151-154. (In German)
20. DIN-EN197-1. (2004). "Zement - Teil 1: Zusammensetzung, Anforderungen und Konformitätskriterien von Normalzement, Ausgabe 8 /2004." (In German)
21. Eusebio, D. A. (2003). "Cement bonded board: Today's alternative." Technical Forum in celebration of the PCIERD 21st anniversary Pasig City, Philippine, 23-45, 2003.
22. Eusebio, D. A., Soriano, F. P., Cabangon, R. J., and Evans, P. D. (2000a). "Manufacture of low-cost wood-cement composites in the Philippines using plantation-grown Australian species; II Acacias," Wood-Cement Composites in the Asia-Pacific Region, Canberra, Australia, 115-122, 2000a.
23. Eusebio, D. A., Soriano, F. P., Cabangon, R. J., and Evans, P. D. (2000b). "Manufacture of low-cost wood-cement composites in the Philippines using plantation-grown Australian species: I. Eucalyptus," Wood-Cement Composites in the Asia-Pacific Region, Canberra, Australia, 105-114, 2000b.
24. Fan, M. Z., Bonfield, P. W., Dinwoodie, J. M., Boxall, J., and Breese, M. C. (2004a). "Dimensional instability of cement-bonded particleboard: The effect of surface coating," Cement Concrete Res. 34, 1189-1197.
25. Fan, M. Z., Bonfield, P. W., Dinwoodie, J. M., and Breese, M. C. (1999a). "Dimensional instability of cement-bonded particleboard: Mechanisms of deformation of CBPB," Cement Concrete Res. 29, 923-932.
26. Fan, M. Z., Dinwoodie, J. M., Bonfield, P. W., and Breese, M. C. (1999b). "Dimensional instability of cement-bonded particleboard: Behavior of cement paste and its contribution to the composite," Wood Fibre Sci. 31, 306-318.
27. Fan, M. Z., Dinwoodie, J. M., Bonfield, P. W., and Breese, M. C. (1999c). "Dimensional instability of cement bonded particleboard: behaviour of wood chips from various stages of manufacture of CBPB," J Mater Sci. 34, 1729-1740.
28. Fan, M. Z., Dinwoodie, J. M., Bonfield, P. W., and Breese, M. C. (2002). "Dimensional instability of cement bonded particleboard: Part 1: Behaviour and modelling prediction under a constant and single change in RH," Wood Sci. Technol. 36, 125-143.
29. Fan, M. Z., Dinwoodie, J. M., Bonfield, P. W., and Breese, M. C. (2004b). "Dimensional instability of cement bonded particleboard: Part 2: Behaviour and its prediction under cyclic changes in RH," Wood Sci. Technol. 38, 53-68.
30. Fan, M. Z., Dinwoodie, J. M., Bonfield, P. W., and Breese, M. C. (2004c). "Dimensional instability of cement bonded particleboard: Modelling CBPB as a composite of two materials," Wood Sci. Technol. 37, 373-383.
31. Fan, M. Z., Dinwoodie, J. M., Bonfield, P. W., and Breese, M. C. (2004d). "Dimensional instability of cement bonded particleboard: stabilisation treatments," Wood Sci. Technol. 38, 349-362.
32. Fischer, F., Wienhaus, O., Ryssel, M., and Olbrecht, J. (1974). "Die wasserlöslichen Kohlenhydrate des Holzes und ihr Einfluss auf die Herstellung von Holzwolle-Leichtbauplatten," Holztechnologie 15, 12-19. (In German)
33. Garcia-Jaldon, C., Dupeyre, D., and Vignon, M. R. (1998). "Fibres from semi-retted hemp bundles by steam explosion treatment," Biomass Bioenergy 14, 251-260.
34. Geimer, R. L., Leao, A., Armbruster, D., and Pablo, A. (1994). "Property enhancement of wood composites using gas injection," Proceedings of the 28th Washington State University international particleboard/composite materials symposium, Washington State University, Pullman, Washington, USA, 143-259, 1994.
35. Geimer, R. L., Souza, M. R., Moslemi, A. A., and Simatupang, M. H. (1992). "Carbon dioxide application for rapid production of cement particleboard," 3rd International inorganic-bonded wood and fiber composite materials, Spokane, Washington, USA, 31-41, 1992.
36. Geimer, R. L., Souza, M. R., Moslemi, A. A., and Simatupang, M. H. (1993). "Carbon dioxide application for rapid production of cement particleboard," For. Prod. Res. Soc. 3, 31-41.
37. Gnanaharan, R., and Dhamodaran, T. K. (1985). "Suitability of some tropical hardwoods for cement-bonded wood-wood board manufacture," Holzforschung 39, 337-340.
38. Govin, A., Peschard, A., Fredon, E., and Guyonnet, R. (2005). "New insights into wood and cement interaction," Holzforschung 59, 330-335.
39. Hachmi, M., and Moslemi, A. A. (1990). "Effect of wood pH and buffering capacity on wood-cement compatibility," Holzforschung 44, 425-430.
40. Hachmi, M., Moslemi, A. A., and Campbell, A. G. (1990). "A new technique to classify the compatibility of wood with cement," Wood Sci. Technol. 24, 345-354.
41. Hermawan, D., Hata, T., Kawai, S., Nagadomi, W., and Kuroki, Y. (2002a). "Effect of carbon dioxide-air concentration in the rapid curing process on the properties of cement-bonded particleboard," J. Wood Sci. 48, 179-184.
42. Hermawan, D., Hata, T., Kawai, S., Nagadomi, W., and Kuroki, Y. (2002b). "Manufacturing oil palm fronds cement-bonded board cured by gaseous or supercritical carbon dioxide," J. Wood Sci. 48, 20-24.
43. Hermawan, D., Hata, T., Umemura, K., Kawai, S., Kaneko, S., and Kuroki, Y. (2000). "New technology for manufacturiung high-strength cement-bonded particleboard using supercritical carbon dioxide," J. Wood Sci., 46, 85-88.
44. Hermawan, D., Hata, T., Umemura, K., Kawai, S., Nagadomi, W., and Kuroki, Y. (2001a). "Rapid production of high-strength cement-bonded particleboard using gaseous or supercritical carbon dioxide," J. Wood Sci. 47, 294-300.
45. Hermawan, D., Subiyanto, B., and Kawai, S. (2001b). "Manufacture and properties of oil palm frond cement-bonded board," J. Wood Sci. 47, 208-213.
46. Hinterstoisser, B., Weingärtner, J., and Praznik, W. (1992). "Influence of wood drying processes on the carbohydrate matrix of wood of Picea abies," 3rd IUFRO International Wood Drying Conference, Vienna, 217-221, 1992.
47. Hofstrand, A. D., Moslemi, A. A., and Garcia, J. F. (1984). "Curing characteristics of wood particles from nine northern Rocky Mountain species mixed with Portland cement," Forest Prod. J. 34, 57-61.
48. Hsu, W. E., Schwald, W., Schwald, J., and Shields, J. A. (1988). "Chemical and physical changes required for producing dimensionally stable wood-based composites Part 1: Steam pretreatment," Wood Sci. Technol. 22, 281-289.
49. Huang, C., and Cooper, P. A. (2000). "Cement-bonded particleboards using CCA-treated wood removed from service," Forest Prod. J. 50, 49-56.
50. Irle, M., and Simpson, H. (1992). "Agricultural residues for cement-bonded composites," 3rd International inorganic-bonded wood and fiber composite materials, Spokane, Washington, USA, 54-58, 1992.
51. Jorge, F. C., Pereira, C., and Ferreira, J. M. F. (2004)," Wood-cement composites: A review." Holz Roh Werkst. 62, 370-377.
52. Karade, S. R., Irle, M., and Maher, K. (2003). "Assessment of wood-cement compatibility: A new approach," Holzforschung 57, 672-680.
53. Kavvouras, P. K. (1987). "Suitability of Quercus conferta wood for the manufacture of cement-bonded flakeboards," Holzforschung 41, 159-163.
54. Khedari, J., Suttisonk, B., Pratinthong, N., and Hirunlabh, J. (2001). "New lightweight composite construction materials with low thermal conductivity," Cement Concrete Comp. 23, 65-70.
55. Kim, W., Yahaga, M. S., and Goto, M. (2005). "Effects of steam explosion on the chemical composition and rumen degradability of rice (Oryza sativa L.) straw," Grassland Science 51, 139-144.
56. Klar, G. V., and Van Kov, P. I. (1975). "Die Anisotropie der physikalisch-mechanischen Eigenschaften von Holzbeton mit orientierten Spänen," Holzindustrie 3, 86-88. (In German)
57. Knill, C. J., and Kennedy, J. F. (2003). "Degradation of cellulose under alkaline conditions," Carbohyd. Polym. 51, 291-300.
58. Kondrup, C. (1990). "Creep of cement bonded particleboard with special reference to the influence of humidity and temperature," Holz Roh Werkst. 48, 31-35.
59. Kühne, G., and Meier, W. (1990). "Ursachen und Möglichkeiten zur Beeinflussung der chemischen Wechselwirkungen in Holzfaserstoff-Zement- und Holzfaserstoff-Gips-Gemischen," Holz Roh Werkst. 48, 153-158. (In German)
60. Lawther, J. M., Sun, R., and Banks, W. B. (1996). "Effect of steam treatment on the chemical composition of wheat straw," Holzforschung, 50, 365-371.
61. Lee, A. W. C. (1984). "Physical and mechanical properties of cement bonded southern pine excelsior board," Forest Prod. J. 34(4), 30-34.
62. Lee, A. W. C. (1985). "Effect of cement/wood ratio on bending properties of cement - bonded southern pine excelsior board," Wood Fibre Sci. 17, 361-364.
63. Lee, A. W. C, and Hong, Z. (1986). "Compressive strength of cylindrical samples as an indicator of wood-cement compatibility," Forest Prod. J., 36, 87-90.
64. Li, W., Shupe, T. F., and Hse, C. Y. (2004). "Physical and mechanical properties of flakeboard produced from recycled CCA-treated wood," Forest Prod. J., 54(2), 89-94.
65. Ma, L. F., Yamauchi, H., Pulido, O. R., Sasaki, H., and Kawai, S. (2000). "Production and properties of oriented cement-bonded boards from Sugi (Cryptomeria japonica D. Don)," Wood-Cement Composites in the Asia-Pacific Region, Canberra, Australia, 140-147, 2000.
66. Matsushita, Y., Miyawaki, S., and Yasuda, S. (2003). "Manufacture of wood-cement boards VIII: cement-hardening inhibitory compounds of keyaki (Japanese zelkova, Zelkova serrata)," J. Wood Sci., 49, 281-284.
67. Meneéis, C. H. S., Castro, V. G., and Souza, M. R. (2007). "Production and properties of a medium density wood-cement boards produced with oriented strands and silica fume," Maderas: Ciencia y tecnología 9(2), 105-116.
68. Milestone, N. B. (1979). "Hydration of tricalcium silicate in the presence of lignosulfonates, glucose and sodium gluconate," J. Am. Ceram. Soc. 62, 321-324.
69. Miller, D. P., and Moslemi, A. A. (1991a). "Wood-cement composites: species and heartwood-sapwood effects on hydration and tensile strength," Forest Prod. J., 41, 9-14.
70. Miller, D. P., and Moslemi, A. A. (1991b). "Wood-cement composites: Effect of model compounds on hydration characteristics and tensile strength," Wood Fibre Sci., 23, 472-482.
71. Miyatake, A., Fiujii, T., Hiramatsu, Y., Abe, H., and Tonosaki, M. (2000). "Manufacture of wood strand-cement composite for structural use," Wood-Cement Composites in the Asia-Pacific Region, Canberra, Australia, 148-152, 2000.
72. Mohr, B. J., El.Ashkar, N. H. A., and Kurtis, K. E. (2004). "Fiber-cement composites for housing construction: State-of-the-art review." NSF Housing Research Agenda Workshop, Orlando, Florida, USA, 112-128, 2004.
73. Morrissey, F. E., Courts, R. S. P., and Grossman, P. U. A. (1985). "Bond between cellulose fibers and cement." Int. J. Cem. Compos. Lightweight Concr., 7(2), 73-80.
74. Moslemi, A. A. (1999). "Emerging technologies in mineral-bonded wood and fiber composites," Adv. Perform. Mater. 6, 161-179.
75. Moslemi, A. A., Garcia, J. F., and Hofstrand, A. D. (1983). "Effect of various treatments and additives on wood-Portland cement-water systems," Wood Fibre Sci. 15, 164-176.
76. Moslemi, A. A., and Lim, Y. T. (1984). "Compatibility of southern hardwoods with Portland cement," Forest Prod J. 34, 22-26.
77. Moslemi, A. A., and Pfister, S. C. (1987). "The influence of cement/ wood ratio and cement type on bending strength and dimensional stability of wood-cement composite panels," Wood Fibre Sci. 19, 165-175.
78. Moslemi, A. A., Souza, M., and Geimer, R. (1994). "Accelerated ageing of cement-bonded particleboard," 4th International Inorganic-Bonded Wood and Fiber Composite Materials Conference, Spokane, Washington, USA, 83-88, 1994.
79. Ntalos, G., and Papadopoulos, A. (2006). "Mechanical and physical properties of cement bonded OSB." Cost Action E44 - E49 Wood Resources and Panel Properties, Valencia, 315-319, 2006.
80. Okino, E. Y. A., Souza, M. R., Santana, M. A. E., Alves, M. V., Sousa, M. E., and Teixeira, D. E. (2005). "Physico-mechanical properties and decay resistance of Cupressus spp. cement-bonded particleboards," Cement Concrete Comp. 27, 333-338.
81. Pablo, A., Geimer, R. L., and Wood, J. E. (1994). "Accelerated pressing of low-density cement-bonded board," 4th International Inorganic-bonded Wood and Fiber Composite Materials, Spokane, WA, USA, 1994.
82. Papadopoulos, A. N. (2007). "An investigation of the suitability of some Greek wood species in wood-cement composites manufacture," Holz Roh Werkst. 65, 245-246.
83. Papadopoulos, A. N., Ntalos, G. A., and Kakaras, I. (2006). "Mechanical and physical properties of cement-bonded OSB." Holz Roh Werkst. 64, 517-518.
84. Parameswaran, N., Bröker, F. W., and Simatupang, M. H. (1977). "Zur Mikrotechnologie mineralgebundener Holzwerkstoffe," Holzforschung 31, 173-178. (In German)
85. Paribotoro, S. (2000). "Effect of aqueous extraction of wood-wool on the properties of wood-wool cement board manufactured from teak (Tectona grandis)," Wood-Cement Composites in the Asia-Pacific Region, Canberra, Australia, 2000.
86. Pereira, C., Jorge, F. C, Irle, M., and Ferreira, J. M. F. (2006a). "Characterizing the setting of cement when mixed with cork, blue gum, or maritime pine, grown in Portugal I: Temperature profiles and compatibility indices," J. Wood Sci., 52, 311-317.
87. Pereira, C, Jorge, F. C, Irle, M., and Ferreira, J. M. F. (2006b). "Characterizing the setting of cement when mixed with cork, blue gum, or maritime pine, grown in Portugal II: X-ray diffraction and differential thermal analyzes," J. Wood Sci., 52, 318-324.
88. Peschard, A., Govin, A., Grosseau, P., Guilhot, B., and Guyonnet, R. (2004). "Effect of polysaccharides on the hydration of cement paste at early ages," Cement Concrete Comp., 34, 2153-2158.
89. Peschard, A., Govin, A., Pourchez, J., Fredon, E., Bertrand, L., Maximilien, S., and Guilhot, B. (2006). "Effect of polysaccharides on the hydration of cement suspension," J. Eue. Ceramn. Soc. 26, 1439-1445.
90. Qi, H., and Cooper, P. A. (2007). "The effects of composition and carbon dioxide injection time on the properties of wood-cement composites," Holz Roh Werkst. 65, 267-273.
91. Qi, H., Cooper, P. A., and Wan, H. (2006). "Effect of carbon dioxide injection on production of wood cement composites from waste medium density fiberboard (MDF)," Waste Manage. 26, 509-515.
92. Ramirez-Coretti, A., Eckelman, C. A., and Wolfe, R. W. (1998). "Inorganic-bonded composite wood panel systems for low-cost housing: A Central American perspective," Forest Prod J., 48, 62-68.
93. Rowell, R. R. (2007). Materials, chemicals, and energy from biomass energy. Chapter 5: Composite materials from forest biomass: A review of current practices, science, and technology, Oxford University Press.
94. Sandermann, W., and Brendel, M. (1956). "Die 'zementvergiftende' Wirkung von Holzinhaltsstoffen und ihre Abhängigkeit von der chemischen Konstitution," Holz Roh Werkst. 14, 307-313. (In German)
95. Sandermann, W., and Kohler, R. (1964). "Über eine kurze Eignungsprüfung von Hölzern für zementgebundene Werkstoffe," Holzforschung 18, 53-59. (In German)
96. Sandermann, W., Preusser, H., and Schweers, W. (1960). "Studien über mineralgebundene Holzwerkstoffe: Über die Wirkung von Holzinhaltsstoffen auf den Abbindevorgang bei zementgebundenen Holzwerkstoffen," Holzforschung 14, 70-77. (In German)
97. Sasaki, M., Adschiri, T., and Arai, K. (2003). "Fractionation of sugarcane bagasse by hydrothermal treatment," Bioresource Technol. 86, 301-304.
98. Sauvat, N., Sell, R., Mougel, E., and Zoulalian, A. (1999). "A study of ordinary Portland cement hydration with wood by isothermal calorimetry," Holzforschung 53, 104-108.
99. Savastano, H., Warden, P. G., and Courts, R. S. P. (2000). "Brazilian waste fibres as reinforcement for cement-based composites," Cement Concrete Comp. 22, 379-384.
100. Savastano, H., Warden, P. G., and Coutts, R. S. P. (2003). "Potential of alternative fiber cements as building materials for developing countries," Cement Concrete Comp. 25, 585-592.
101. Schubert, B., and Wienhaus, O. (1984). "Die Messung des Temperaturverlaufes der Zementhydratation als Prüfmethode für die Herstellung von Holz-Zement-Wekstoffen," Holztechnologie 25(3), 118-122. (In German)
102. Schubert, B., Wienhaus, O., and Bloßfeld, O. (1990a). "Untersuchungen zum System Holz-Zement. Einfluß unterschiedlicher Zementarten auf das Abbindeverhalten von Holz-Zement-Mischungen," Holz Roh Werkst. 48(5), 185-189. (In German)
103. Schubert, B., Wienhaus, O., and Bloßfeld, O. (1990b). "Untersuchungen zum System Holz-Zement. Einfluss unterschiedlicher Holzarten auf das Abbindeverhalten von Holz-Zement-Mischungen und Möglichkeiten zur Modifizierung des Systems," Holz Roh Werkst. 48(11), 423-428. (In German)
104. Schwarz, H. G., and Simatupang, M. H. (1983). "Einfluß der chemischen Zusammensetzung von Portlandzement auf die Druckfestigkeit von Versuchskörpern aus Zement und Fichten- oder Buchenspänen," Holz Roh Werkst. 41, 65-69. (In German)
105. Schwarz, H. G., and Simatupang, M. H. (1984). "Eignung des Buchenholzes zur Herstellung zementgebundener Holzwerkstoffe," Holz Roh Werkst. 42, 265-270. (In German)
106. Seddig, N., and Simatupang, M. H. (1988). "Scherfestigkeits-Test zur Eignungsprüfung verschiedener Holzarten für gipsgebundene Holzwerkstoffe und REM-Betrachtung der Scherflächen," Holz Roh Werkst. 46, 9-13. (In German)
107. Semple, K. E., Cunningham, R. B., and Evans, P. D. (1999). "Cement hydration tests using wood flour may not predict the suitability of Acacia mangium and Eucalyptus pellita for the manufacture of wood-wool cement boards," Holzforschung 53, 327-332.
108. Semple, K. E., Cunningham, R. B., and Evans, P. D. (2000). "Compatibility of Eight Temperate Australian Eucalyptus Species with Portland Cement," Wood-Cement Composites in the Asia-Pacific Region, Canberra, Australia, 40-46, 2000.
109. Semple, K. E., and Evans, P. D. (2000). "Screening Inorganic Additives for Ameliorating the Inhibition of Hydration of Portland Cement by the Heartwood of Acacia mangium," Wood-Cement Composites in the Asia-Pacific Region, Canberra, Australia, 29-39, 2000.
110. Semple, K. E., and Evans, P. D. (2004). "Wood-cement composites - Suitability of Western Australian mallee eucalypt, blue gum and melaleucas," RIRDC/Land & Water Australia/FWPRDC/MDBC.
111. Semple, K. E., and Evans, P. D. (2007). "Manufacture of wood-cement composites from Acacia mangium. Part II. Use of accelerators in the manufacture of wood-wool cement boards from A. mangium," Wood Fibre Sci. 39, 120-131.
112. Shigekura, Y., Takahashi, K., Koga, K., and Funasaki, M. (1992). "Properties of wood fiber-cement composite materials manufactured by an extruder," 3rd International inorganic-bonded wood and fiber composite materials, Spokane, Washington, USA, 42-47, 1992.
113. Simatupang, M. H., and Bröker, F. W. (1998). "Properties and hygroscopic isotherm of cement-bonded particleboards and fibreboards made by carbon dioxide injection method and conventional methods," Holz Roh Werkst. 56, 275-276.
114. Simatupang, M. H., and Geimer, R. (1990). "Inorganic binder for wood composites: Feasibility and limitations," Wood Adhesives 1990, Madison, Wisconsin, USA, 169-176, 1990.
115. Simatupang, M. H., and Habighorst, C. (1992). "The carbon dioxide process to enhance cement hydration in manufacturing of cement-bonded composites - comparison with common production method," 3rd International Inorganic-Bonded Wood and Fiber Composite Materials, Spokane, Washington, USA, 114-120, 1992.
116. Simatupang, M. H., and Habighorst, C. (1993a). "Fertigung und Eigenschaften von schnell abbindenden, zementgebundenen Probekörpern und Spanplatten, hergestellt durch Begasung mit Kohlendioxid - Stand der Forschung und Entwicklung," Holz Roh Werkst. 51, 31-35. (In German)
117. Simatupang, M. H., and Habighorst, C. (1993b). "Fertigung und Eigenschaften von schnell abbindenden, zementgebundenen Probekörpern, hergestellt durch Begasung mit Kohlendioxid," Holz Roh Werkst. 51, 107-114. (In German)
118. Simatupang, M. H., and Habighorst, C. (1993c). "Fertigung und Eigenschaften von schnell abbindenden, zementgebundenen Spanplatten, hergestellt durch Begasung mit Kohlendioxid," Holz Roh Werkst. 51, 247-252. (In German)
119. Simatupang, M. H., Habighorst, C., Lange, H., and Neubauer, A. (1995). "Investigations on the influence of the addition of carbon dioxide on the production and properties of rapidly set wood-cement composites," Cement Concrete Comp. 17, 187-197.
120. Simatupang, M. H., and Lange, H. (1992). "Herstellung, Eigenschaften und Anwendung mineralisch gebundener Holzwerkstoffe (1)," Holz-Zentralblatt, Stuttgart, 324-326. (In German)
121. 2-Feinstaub auf die Biegefestigkeit zementgebundener Spanplatten," Holz Roh Werkst. 45, 131-136. (In German)
122. Simatupang, M. H., and Neubauer, A. (1993). "Fertigung und Eigenschaften von schnell abbindenden, zementgebundenen Spanplatten, hergestellt durch Begasung mit Kohlendioxid - Einfluß der Zementfestigkeitsklasse," Holz Roh Werkst. 51, 309-311. (In German)
123. Simatupang, M. H., Seddig, N., Habighorst, C., and Geimer, R. (1991). "Technologies for rapid production of mineral-bonded wood composites boards," For. Prod. Res. Soc. 2, 18-27.
124. Soroushian, P., Aouadi, F., Chowdhury, H., Nossoni, A., and Sarwar, G. (2004). "Cement-bonded straw board subjected to accelerated processing," Cement Concrete Comp. 26, 797-802.
125. Soroushian, P., Won, J., Chowdhury, H., and Nossoni, A. (2003). "Development of accelerated processing techniques for cement-bonded wood particleboard," Cement Concrete Comp. 25, 721-727.
126. Stahl, D. C., Cramer, S. M., and Geimer, R. L. (1997). "Effects of microstructural heterogeneity in cement excelsior board," Wood Fibre Sci. 29, 345-352.
127. Sutigno, P. (2000). "Effect of aqueous extraction of wood-wool on the properties of wood-wool cement board manufactured from teak (Tectona grandis)" Wood-Cement Composites in the Asia-Pacific Region, Canberra, Australia, 24-28, 2000.
128. Teischinger, A. (2006). Lignovisionen 14 - Hochleistungswerkstoffe aus der Natur. Holz - optimierter Hochleistungswerkstoff der Natur und Herausforderungen bei der technologischen Nutzung, Institut fur Holzforschung, Universität für Bodenkultur, Wien. (In German)
129. Thygesen, A., Daniel, G., Lilholt, H., and Thomsen, A. B. (2005). "Hemp fiber microstructure and use of fungal defibration to obtain fibers for composite materials," J. Natural Fibers 2, 19-37.
130. Toledo Filho, R. D., Scrivener, K., England, G. L., and Ghavami, K. (2000). "Durability of alkali-sensitive sisal and coconut fibres in cement mortar composites," Cement Concrete Comp. 22, 127-143.
131. Wagh, A. S., Singh, D., and Knox, L. J. (1994). "Rapid setting of Portland cement by greenhouse carbon dioxide capture," Annual Meeting of the American Ceramic Society, Indianapolis, 1994.
132. Wagh, A. S., Singh, D., Pullockaran, J., and Knox, L. (1997). "Capture of green-house carbon dioxide in Portland cement," Energy Technology Division Argonne National Laboratory, Argonne, Illinois.
133. Warden, P. E. G., Savastano, H., and Courts, R. S. P. (2000). "Fibre-cement composites from Brazilian agricultural and industrial waste materials," Wood-Cement Composites in the Asia-Pacific Region, Canberra, Australia, 55-61, 2000.
134. Weatherwax, R. C., and Tarkow, H. (1964). "Effect of wood on setting of Portland cement," Forest Prod. J. 14, 567-570.
135. Wei, Y. M., Fujii, T., Hiramatsu, Y., Miyatake, A., Yoshinaga, S., Fujii, T., and Tomita, B. (2004). "A preliminary investigation on microstructural characteristics of interfacial zone between cement and exploded wood fiber strand by using SEM-EDS," J. Wood Sci. 50, 327-336.
136. Wei, Y. M., Tomita, B., Hiramatsu, Y., Miyatake, A., Fujii, T., Fujii, T., and Yoshinaga, S. (2003). "Hydration behavior and compressive strength of cement mixed with exploded wood fiber strand obtained by the water-vapor explosion process," J. Wood Sci. 49, 317-326.
137. Wei, Y. M., Zhou, Y. G., and Tomita, B. (2000a). "Study of hydration behavior of wood cement-based composite II: Effect of chemical additives on the hydration characteristics and strengths of wood-cement composites," J. Wood Sci. 46, 444-451.
138. Wei, Y. M., Zhou, Y. G., and Tomita, B. (2000b). "Hydration behavior of wood cement-based composite I: Evaluation of wood species effects on compatibility and strength with ordinary Portland cement," J. Wood Sci. 46, 296-302.
139. Widyorini, R., Xu, J., Watanabe, T., and Kawai, S. (2005). "Chemical changes in steam-pressed kenaf core binderless particleboard," J. Wood Sci. 51, 26-32.
140. Wolfe, R., and Gjinolli, A. E. (1996a). "Assessment of cement-bonded wood composites as means of using low-valued wood for engineered applications," International Wood Engineering Conference, New Orleans, LA, 74-80, 1996a.
141. Wolfe, R. W., and Gjinolli, A. (1996b). "Cement-bonded wood composites as an engineering material," The Use of Recycled Wood and Paper in Building Applications, Madison, Wisconsin, 84-91, 1996b.
142. Wolfe, R. W., and Gjinolli, A. (1999). "Durability and strength of cement-bonded wood particle composites made from construction waste," Forest Prod. J. 49, 24-31.
143. Yasuda, S., Ima, K., and Matsushita, Y. (2001). "Manufacture of wood-cement boards VII: cement-hardening inhibitory compounds of hannoki (Japanese alder, Alnus japonica Steud.)," J. Wood Sci. 48, 242-244.
144. 2," J. Am. Ceram. Soc. 57(9), 394-397.
145. Zhou, Y., and Kamdem, D. P. (2002). "Effect of cement/wood ratio on the properties of cement-bonded particleboard using CCA-treated wood removed from service," Forest Prod. J. 52, 77-81.