Effects of metal ion type on ionomer-assisted reactive toughening of poly(lactic acid)

Industrial and Engineering Chemistry Research

Volumn 52, Issue 13, 2013, Pages 4787-4793

  Liu, Hongzhi ^a   Guo, Xiaojie ^a   Song, Wenjia ^a   Zhang, Jinwen ^a  

^a Washington State University   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

BLENDING TEMPERATURE; POLY LACTIC ACID; POLY(ETHYLENE-CO-METHACRYLIC ACID); POLYLACTIC ACIDS; REACTIVE BLENDING; REACTIVE COMPATIBILIZATION; TERNARY BLENDS; TOUGHENING EFFECTS;

BLENDING; ELASTOMERS; ETHYLENE; IONOMERS; LACTIC ACID; SODIUM; ZINC;

METAL IONS;

EID: 84875768206     PISSN: 08885885     EISSN: 15205045     Source Type: Journal    
DOI: 10.1021/ie303317k     Document Type: Article

References (31)

1. Murariu, M.; Ferreira, A. D. S.; Alexandre, M.; Dubois, P. Polylactide (PLA) designed with desired end-use properties: 1. PLA compositions with low molecular weight ester-like plasticizers and related performances Polym. Adv. Technol. 2008, 19 (6) 636-646
2. Lemmouchi, Y.; Murariu, M.; Santos, A. M. D.; Amass, A. J.; Schacht, E.; Dubois, P. Plasticization of poly(lactide) with blends of tributyl citrate and low molecular weight poly(d, l -lactide)- b -poly(ethylene glycol) copolymers Eur. Polym. J. 2009, 45 (10) 2839-2848
3. Grijpma, D. W.; Nijenhuis, A. J.; van Wijk, P. G. T.; Pennings, A. J. High impact strength as-polymerized PLLA Polym. Bull. 1992, 29, 571-578
4. Theryo, G.; Jing, F.; Pitet, L. M.; Hillmyer, M. A. Tough polylactide graft copolymers Macromolecules 2010, 43 (18) 7394-7397
5. Jiang, L.; Zhang, J.; Wolcott, M. P. Comparison of polylactide/nano-sized calcium carbonate and polylactide/montmorillonite composites: reinforcing effects and toughening mechanisms Polymer 2007, 48 (13) 7632-7644
6. Anderson, K. S.; Lim, S. H.; Hillmyer, M. A. Toughening of polylactide by melt blending with linear low-density polyethylene J. Appl. Polym. Sci. 2003, 89 (14) 3757-3768
7. Anderson, K. S.; Hillmyer, M. A. The influence of block copolymer microstructure on the toughness of compatibilized polylactide/polyethylene blends Polymer 2004, 45 (26) 8809-8823
8. Jiang, L.; Wolcott, M. P.; Zhang, J. Study of biodegradable polylactide/poly(butylene adipate- co -terephthalate) blends Biomacromolecules 2006, 7 (1) 199-207
9. Bhardwaj, R.; Mohanty, A. K. Modification of brittle polylactide by novel hyperbranched polymer-based nanostructures Biomacromolecules 2007, 8 (8) 2476-2484
10. Oyama, H. T. Super-tough poly(lactic acid) materials: Reactive blending with ethylene copolymer Polymer 2009, 50 (3) 747-751
11. Hashima, K.; Nishitsuji, S.; Inoue, T. Structure-properties of super-tough PLA alloy with excellent heat resistance Polymer 2010, 51 (17) 3934-3939
12. Robertson, M. L.; Chang, K.; Gramlich, W. M.; Hillmyer, M. A. Toughening of polylactide with polymerized soybean oil Macromolecules 2010, 43 (4) 1807-1814
13. Afrifah, K. A.; Matuana, L. M. Impact modification of polylactide with a biodegradable ethylene/acrylate copolymer Macromol. Mater. Eng. 2010, 295 (9) 802-811
14. Bai, H.; Xiu, H.; Gao, J.; Deng, H.; Zhang, Q.; Yang, M.; Fu, Q. Tailoring impact toughness of poly(l -lactide)/poly(ε-caprolactone) (PLLA/PCL) blends by controlling crystallization of PLLA matrix ACS Appl. Mater. Interfaces 2012, 4 (2) 897-905
15. Liu, H.; Chen, F.; Liu, B.; Estep, G.; Zhang, J. Super toughened poly(lactic acid) ternary blends by simultaneous dynamic vulcanization and interfacial compatibilization Macromolecules 2010, 43 (14) 6058-6066
16. Liu, H.; Song, W.; Chen, F.; Guo, L.; Zhang, J. Interaction of microstructure and interfacial adhesion on impact performance of polylactide (PLA) ternary blends Macromolecules 2011, 44 (6) 1513-1522
17. Liu, H.; Guo, L.; Guo, X.; Zhang, J. Effects of reactive blending temperature on impact toughness of poly(lactic acid) ternary blends Polymer 2012, 53 (2) 272-276
18. Song, W.; Liu, H.; Chen, F.; Zhang, J. Effects of ionomer characteristics on reactions and properties of poly(lactic acid) ternary blends prepared by reactive blending Polymer 2012, 53 (12) 2476-2484
19. Tanaka, Y.; Bauer, R. S. In Epoxy Resins: Chemistry and Technology, 2 nd ed.; May, C. A., Ed.; Marcel Dekker: New York, 1988; Chapter 3.
20. Taubner, V.; Shishoo, R. Influence of processing parameters on the degradation of poly(l -lactide) during extrusion J. Appl. Polym. Sci. 2001, 79 (12) 2128-2135
21. Zenkiewicz, M.; Richert, J.; Rytlewski, P.; Moraczewski, K.; Stepczynska, M.; Karasiewicz, T. Characterisation of multi-extruded poly(lactic acid) Polym. Test. 2009, 28 (4) 412-418
22. Fan, Y.; Nishida, H.; Mori, T.; Shirai, Y.; Endo, T. Thermal degradation of poly(l -lactide): Effect of alkali earth metal oxides for selective l, l -lactide formation Polymer 2004, 45 (4) 1197-1205
23. Cam, D.; Marucci, M. Influence of residual monomers and metals on poly (l -lactide) thermal stability Polymer 1997, 38 (8) 1879-1884
24. Noda, M.; Okuyama, H. Thermal catalytic depolymerization of poly(l -lactic acid) oligomer into ll -lactide: Effects of Al, Ti, Zn, and Zr compounds as catalysts Chem. Pharm. Bull. 1999, 47 (4) 467-471
25. Kaci, M.; Cimmino, S.; Silvestre, C.; Duraccio, D.; Benhamida, A.; Zaidi, L. Ethylene butyl acrylate glycidyl methacrylate terpolymer as an interfacial agent for isotactic poly(propylene)/wood flour composites Macromol. Mater. Eng. 2006, 291 (7) 869-876
26. Shah, R. K.; Paul, D. R. Comparison of nanocomposites prepared from sodium, zinc, and lithium ionomers of ethylene/methacrylic acid copolymers Macromolecules 2006, 39 (9) 3327-3336
27. Statz, R. J.; Chen, J. C.; Hagman, J. F. Highly resilient thermoplastic elastomer compositions. US Patent US6815480 (2004).
28. Garlotta, D. A literature review of poly(lactic acid) J. Polym. Environ. 2001, 9 (2) 63-84
29. Gupta, A. P.; Kumar, V. New emerging trends in synthetic biodegradable polymers-Polylactide: A critique Eur. Polym. J. 2007, 43 (10) 4053-4074
30. Dorgan, J. R.; Braun, B.; Wegner, J. R.; Knauss, D. M. Poly(lactic acids): A brief review. In Degradable Polymers and Materials, 1 st ed.; ACS Symposium Series; American Chemical Society: Washington, DC, 2006; Chapter 7.
31. Nielson, L. E.; Landel, R. F. In Mechanical Properties of Polymers and Composites, 2 nd ed.; Marcel Dekker: New York, 1994; Chapter 4.