Characterisation of multi-extruded poly(lactic acid)

Polymer Testing

Volumn 28, Issue 4, 2009, Pages 412-418

  Zenkiewicz, Marian ^a   Richert, Józef ^b   Rytlewski, Piotr ^a   Moraczewski, Krzysztof ^a   Stepczyńska, Magdalena ^a   Karasiewicz, Tomasz ^a  

^a KAZIMIERZ WIELKI UNIVERSITY   (Poland)

^b Department of Elastomers and Rubber Technology   (Poland)

Author keywords

Material recycling; Mechanical properties; Multiple extrusion; Poly(lactic acid)

Indexed keywords

CHARACTERISATION; CRYSTALLISATION; DEGRADATION TEMPERATURES; EXTRUSION CYCLES; GLASS TRANSITION TEMPERATURES; MATERIAL RECYCLING; MELT FLOW RATES; MULTIPLE EXTRUSION; NEAT POLYMERS; OXYGEN TRANSMISSION RATES; PHASE TRANSITION TEMPERATURES; POLY(LACTIC ACID); POLYLACTIDE; STATIC TENSION TESTS; TECHNOLOGICAL WASTES; WATER VAPOURS;

BODY FLUIDS; EXTRUSION; FLOW RATE; GLASS TRANSITION; IMPACT STRENGTH; LACTIC ACID; MECHANICAL PROPERTIES; MELTING POINT; ORGANIC ACIDS; OXYGEN; RECYCLING; SUPERCONDUCTING TRANSITION TEMPERATURE; TENSILE STRENGTH; TENSILE TESTING; WATER VAPOR;

MECHANICAL PERMEABILITY;

EID: 67349274136     PISSN: 01429418     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.polymertesting.2009.01.012     Document Type: Article

References (34)

1. In: La Mantia F. (Ed). Handbook of Plastics Recycling. first ed. (2002), Rapra Technology
2. Żenkiewicz M., and Kurcok M. Effects of compatibilizers and electron radiation on thermomechanical properties of composites consisting of five recycled polymers. Polymer Testing 27 (2008) 420
3. Andersson T., Stålbom B., and Wesselén B. Degradation of polyethylene during extrusion. II. degradation of low-density polyethylene, linear low-density polyethylene, and high-density polyethylene in film extrusion. J. Appl. Polym. Sci. 91 (2004) 1525
4. Hisken H., Moss S., J-Pauquet R., and Zweifel H. Degradation of polyolefins during melt processing. Polym. Degrad. Stab. 34 (1991) 279
5. Kometani H., Matsumura T., Suga T., and Kanai T. Quantitative analysis for polymer degradation in the extrusion process. Int. Polym. Proc. 21 (2006) 24
6. Pock E., Kiss C., Janecska A., Epacher E., and Pukánszky B. Effect of chain structure on the processing stability of high-density polyethylene. Polym. Degrad. Stab. 85 (2004) 1015
7. Santos A.S.F., Angelli J.A.M., Trevisan D.W., and Manrich S. Degradation and stabilization of polyolefins from municipal waste during multiple extrusions under different reprocessing conditions. Polym. Degrad. Stab. 77 (2002) 421
8. Al-Malaika S., and Peng X. Metallocene ethylene-1-octene copolymers: effect of extrusion conditions on thermal oxidation of polymers with different comonomer content. Polym. Degrad. Stab. 92 (2007) 2136
9. Al-Malaika S., and Peng X. Stabilization of metallocene ethylene-1-octene copolymers during multiple extrusions. Polym. Degrad. Stab. 93 (2008) 1619
10. da Costa H.M., Ramos V.D.V., and Rocha M.C.G. Rheological properties of polypropylene during multiple extrusion. Polymer Testing 24 (2005) 86
11. da Costa H.M., Ramos V.D.V., and Márcia de Oliveira M.G. Degradation of polypropylene (PP) during multiple extrusion: thermal analysis, mechanical properties and analysis of variance. Polymer Testing 26 (2007) 676
12. Canevarolo S.V. Chain scission distribution function for polypropylene degradation during multiple extrusion. Polym. Degrad. Stab. 709 (2000) 71
13. Ramirez-Vargas E., Navarro-Rodriquez D., Blanqueto-Menchaca A.I., Huerta-Martinez B.M., and Palacios-Mezta M. Degradation effects on the rheological and mechanical properties of multi-extruded blends of impact-modified polypropylene and poly(ethylene-co-vinyl acetate). Polym. Degrad. Stab. 86 (2004) 301
14. Tocháček J., Jančář J., Kalfus J., Zbořilová P., and Buráň Z. Degradation of polypropylene impact-copolymer during processing. Polym. Degrad. Stab. 93 (2008) 770
15. Silva Spinacé M.A., and De Paoli M.A. Characterization of poly(ethylene terephtalate) after multiple processing cycles. J. Appl. Polym. Sci. 80 (2001) 20
16. Vilaplana F., Ribes-Greus A., and Karlsson S. Degradation of recycled high-impact polystyrene. Simulation by reprocessing and thermo-oxidation. Polym. Degrad. Stab. 91 (2006) 2163
17. Boldizar A., and Möller K. Degradation of ABS during repeated processing and accelerated ageing. Polym. Degrad. Stab. 81 (2003) 359
18. Russo G.M., Nicolais V., Di Maio L., Montesano S., and Icarnato L. Rheological and mechanical properties of nylon 6 nanocomposites submitted to reprocessing with single and twin screw extruders. Polym. Degrad. Stab. 92 (2007) 1925
19. Żenkiewicz M., and Richert J. Permeability of polylactide nanocomposite films for water vapour, oxygen and carbon dioxide. Polymer Testing 27 (2008) 835
20. Żenkiewicz M., and Richert J. Effects of nanofillers and samples dimensions on the mechanical properties of injection-molded polylactide nanocomposites. Polimery 53 (2008) 591
21. Brown R. Handbook of polymer testing. Short-Term Mechanical Tests. first ed. (2002), Rapra Technology
22. Standard PN - EN ISO 527 - 2, 1998. Plastics - determination of tensile properties - Part 2: test conditions for moulding and extrusion plastics.
23. Standard PN - EN ISO 527 - 1, 1998. Plastics - determination of tensile properties - Part 1: general principles.
24. Standard PN - EN ISO - 179 - 1, 2004. Plastics - determination of charpy impact properties - Part 1: non-instrumented impact test.
25. Standard PN - EN ISO 1133, 2005. Plastics - Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics.
26. Standard PN - EN ISO 11357-1, 2002. Plastics - differential scanning calorimetry (DSC) - Part 1: general principles.
27. Standard ISO 11357-2, 1999. Plastics - differential scanning calorimetry (DSC) - Part 2: determination of glass transition temperature.
28. Standard ISO 11357-3, 1999. Plastics - differential scanning calorimetry (DSC) - Part 3: determination of temperature and enthalpy of melting and crystallization.
29. Standard PN-EN ISO 11358, 2004. Plastics - thermogravimetry (TG) of polymers - general principles.
30. Standard PN-EN ISO 15106-1, 2007. Plastics-film and sheeting-determination of water vapour transmission rate-Part 1: humidity detection sensor method.
31. Standard PN-EN ISO 2556, 2002. Plastics - determination of the gas transmission rate of films and thin sheets under atmospheric pressure-manometric method.
32. Pluta M. Melt compounding of polylactide/organoclay: structure and properties of nanocomposites. J. Polym. Sci., Part B: Polym. Phys. 44 (2006) 3392-3405
33. Pluta M., Gałe{ogonek}ski A., Alexandre M., Paul M.-A., and Dubois P. Polylactide/montmorillonite nanocomposites prepared by melt blending: structure and some physical properties. J. Appl. Polym. Sci. 86 (2002) 1497-1506
34. Ray S.S., Yamada K., Okamoto M., Fujimoto Y., Ogami A., and Ueda K. New polylactide/layered silicate nanocomposites. 5. Designing of materials with desired properties. Polymer 44 (2003) 6633-6646