Abrasion modeling of multiple-point defect dynamics for machine condition monitoring

IEEE Transactions on Reliability

Volumn 62, Issue 1, 2013, Pages 171-182

  Yaqub, M F ^a   Gondal, Iqbal ^b   Kamruzzaman, Joarder ^c   Loparo, Kenneth A ^d  

^a Condition Monitoring ^*  (Australia)

^b MONASH UNIVERSITY   (Australia)

^c Gippsland School of Information Technology   (Australia)

^d CASE WESTERN RESERVE UNIVERSITY   (United States)

Author keywords

Abrasion modeling; defect diagnosis; machine condition monitoring; multiple point defect modeling; rolling element bearings

Indexed keywords

DEFECT DIAGNOSIS; DEFECT MODELING; ENVELOPE DETECTION; MACHINE CONDITION MONITORING; MODEL DEGRADATIONS; RELATIVE LOCATION; ROLLING ELEMENT BEARING; VIBRATION SIGNATURE;

ABRASION; CONDITION MONITORING; DYNAMICS; POINT DEFECTS; ROTATING MACHINERY; SHAFTS (MACHINE COMPONENTS); TRIBOLOGY;

DEFECTS;

EID: 84874981247     PISSN: 00189529     EISSN: None     Source Type: Journal    
DOI: 10.1109/TR.2013.2241231     Document Type: Article

References (35)

1. R. R. Schoen, T. G. Habetler, F. Kamran, and R. G. Bartheld, "Motor bearing damage detection using stator current monitoring," in Proc. IEEE Conf. Record Ind. Appl. Soc. Annu. Meeting, 1994., vol. 1, pp. 110-116.
2. Y. Jianbo, "Local and nonlocal preserving projection for bearing defect classification and performance assessment," IEEE Trans. Ind. Electron., vol. 59, no. 5, pp. 2363-2376, May 2012.
3. M. El Hachemi Benbouzid, "A review of induction motors signature analysis as a medium for faults detection," IEEE Trans. Ind. Electron., vol. 47, no. 5, pp. 984-993, May 2000.
4. Z. Pinjia, D. Yi, T. G. Habetler, and L. Bin, "A survey of condition monitoring and protection methods for medium-voltage induction motors," IEEE Trans. Ind. Appl., vol. 47, no. 1, pp. 34-46, Jan./Feb. 2011.
5. J. R. Stack, T. G. Habetler, and R. G. Harley, "Fault-signature modeling and detection of inner-race bearing faults," IEEE Trans. Ind. Appl., vol. 42, no. 1, pp. 61-68, Jan./Feb. 2006. (Pubitemid 43204768)
6. O. Geramifard, J. X. Xu, C. K. Pang, J. H. Zhou, and X. Li, "Data-driven approaches in health condition monitoring-A comparative study," in Proc. IEEE Int. Conf. Contr. Autom. (ICCA), 2010, pp. 1618-1622.
7. S. Nandi, H. A. Toliyat, and L. Xiaodong, "Condition monitoring and fault diagnosis of electrical motors-a review," IEEE Trans. Energy Convers., vol. 20, no. 4, pp. 719-729, Dec. 2005. (Pubitemid 41830047)
8. M. K. F, "A review by discussion of condition monitoring and fault diagnosis in machine tools," Int. J. Mach. Tools Manufact., vol. 34, pp. 527-551, 1994.
9. M. F. Yaqub, I. Gondal, and J. Kamruzzaman, "Inchoate fault detection framework: Adaptive selection of wavelet nodes and cumulant orders," IEEE Trans. Instrum. Meas., vol. 61, no. 3, pp. 685-695, Mar. 2012.
10. Z. Bin, C. Sconyers, C. Byington, R. Patrick, M. E. Orchard, and G. Vachtsevanos, "A probabilistic fault detection approach: Application to bearing fault detection," IEEE Trans. Ind. Electron., vol. 58, no. 5, pp. 2011-2018, May 2011.
11. M. F. Yaqub, I. Gondal, and J. Kamruzzaman, "Resonant frequency band estimation using adaptive wavelet decomposition level selection," in Proc. Int. Conf. Mechatron. Autom. (ICMA), 2011, pp. 376-381.
12. L. Bin, L. Yaoyu, W. Xin, and Y. Zhongzhou, "A review of recent advances in wind turbine condition monitoring and fault diagnosis," in Proc. IEEE Conf. Power Electron. Mach. Wind Appl., 2009, pp. 1-7.
13. Q. Hu, Z. He, Z. Zhang, and Y. Zi, "Fault diagnosis of rotating machinery based on improved wavelet package transform and SVMs ensemble," Mechan. Syst. Signal Process., vol. 21, pp. 688-705, 2007. (Pubitemid 44667414)
14. K. Teotrakool, M. J. Devaney, and L. Eren, "Adjustable-speed drive bearing-fault detection via wavelet packet decomposition," IEEE Trans. Instrum. Meas., vol. 58, no. 8, pp. 2747-2754, Aug. 2009.
15. M. F. Yaqub, I. Gondal, and J. Kamruzzaman, "Severity invariant feature selection for machine health monitoring," Int. Rev. Electr. Eng., vol. 6, pp. 238-248, 2011.
16. M. F. Yaqub, I. Gondal, and J. Kamruzzaman, "Severity invariant machine fault diagnosis," in Proc. IEEE Conf. Ind. Electron. Appl., 2011, pp. 21-26.
17. P. D. McFadden and J. D. Smith, "The vibration produced by multiple point defects in a rolling element bearing," J. Sound Vibration, vol. 98, pp. 263-273, 1985.
18. J. Kleer and B. C. Williams, "Diagnosiing multiple faults," Artif. Intell., vol. 32, pp. 97-130, 1987.
19. E. Cabal-Yepez, R. Saucedo-Gallaga, A. G. Garcia-Ramirez, A. A. Fernandez-Jaramillo, M. Pena-Anaya, and M. Valtierra-Rodriguez, "FPGA-based online detection of multiple-combined faults through information entropy and neural networks," in Proc. Int. Conf. Recon-figurable Comput. FPGAs, 2010, pp. 244-249.
20. A. J. Degee, P. Pallav, and C. L. Davidson, "Effect of abrasion medium on wear of stress-bearing composites and amalgam in vitro," J. Dental Res., vol. 65, pp. 654-658, 1986. (Pubitemid 16119152)
21. B. W. E. Avient, J. Goddard, and H. Wilman, "An experimental study of friction and wear during abrasion of metals," Math. Phys. Sci., Proc. Roy. Soc. London. Series A, vol. 258, pp. 159-180, Oct. 18, 1960.
22. M. F. Yaqub, I. Gondal, and J. Kamruzzaman, "Multiple-points fault signature's dynamics modeling for bearing defect frequencies," presented at the Proc. Int. Conf. Contr., Autom., Robot. Vision, 2011.
23. P. W. Tse, Y. H. Peng, and R. Yam, "Wavelet analysis and envelope detection for rolling element bearing fault diagnosis-Their effectiveness and flexibilities," J. Vibration Acoust., vol. 123, pp. 303-310, 2001. (Pubitemid 33716048)
24. R. B. Randall, J. Antoni, and S. Chobsaard, "The relationship between spectral correlation and envelope analysis in the diagnosis of bearing faults and other cyclostationary machine signals," Mechan. Syst. Signal Process., vol. 15, pp. 945-962, 2001. (Pubitemid 33112620)
25. D. Yu, J. Cheng, and Y. Yang, "Application of EMD method and Hilbert spectrum to the fault diagnosis of roller bearings," Mechan. Syst. Signal Process., vol. 19, pp. 259-270, 2005.
26. D. F. Shi, W. J. Wang, and L. S. Qu, "Defect detection for bearings using envelope spectra of wavelet transform," J. Vibration Acoust., vol. 126, pp. 567-573, 2004. (Pubitemid 40181587)
27. R. Rubini and U. Meneghetti, "Application of the envelope and wavelet transform analysis for the diagnosis of incipient faults in ball bearings," Mechan. Syst. Signal Process., vol. 15, pp. 287-302, 2001. (Pubitemid 32409308)
28. M. F. Yaqub, I. Gondal, and J. Kamruzzaman, "Envelope-wavelet packet transform for machine condition monitoring," in Proc. Int. Conf. Contr., Autom., Robot. Vision, 2011, pp. 1597-1603.
29. L. Guo, J. Chen, and X. Li, "Rolling bearing fault classification based on envelope spectrum and support vector machine," J. Vibration Contr., vol. 15, pp. 1349-1363, 2009.
30. Y. Ruqiang and R. X. Gao, "Hilbert-Huang transform-based vibration signal analysis for machine health monitoring," IEEE Trans. Inst. Meas., vol. 55, no. 6, pp. 2320-2329, Dec. 2006. (Pubitemid 46438220)
31. M. Trott, The Mathematica Guidebook: Programming. Berlin, Germany: Springer-Verlag, 2004.
32. P. M. Lerman, "Fitting segmented regression models by grid search," J. Roy. Stat. Soc. Series C (Appl. Statist.), vol. 29, pp. 77-84, 1980.
33. H. Ocak and K. A. Loparo, "Estimation of the running speed and bearing defect frequencies of an induction motor from vibration data," Mechan. Syst. Signal Process., vol. 18, pp. 515-533, 2004.
34. I. S. Bozchalooi and M. Liang, "A joint resonance frequency estimation and in-band noise reduction method for enhancing the detectability of bearing fault signals," Mechan. Syst. Signal Process., vol. 22, pp. 915-933, 2008. (Pubitemid 351289018)
35. M. F. Yaqub, I. Gondal, and J. Kamruzzaman, "An adaptive self-configuration scheme for severity invariant machine fault diagnosis," IEEE Trans. Rel., 2012, accepted for publication.