Finite element modeling of solid particle erosion in AISI 4140 steel and nickel-tungsten carbide composite material produced by the laser-based powder deposition process

Tribology International

Volumn 62, Issue , 2013, Pages 18-28

  Balu, Prabu ^a   Kong, Fanrong ^a   Hamid, Syed ^b   Kovacevic, Radovan ^a  

^a SOUTHERN METHODIST UNIVERSITY   (United States)

^b HALLIBURTON   (United States)

Author keywords

Finite element model; Laser based powder deposition; Ni WC composite material; Solid particle erosion

Indexed keywords

AISI 4140 STEEL; ERODENT; ERODENT PARTICLES; EROSION RATES; FINITE ELEMENT MODELING; FINITE ELEMENT MODELS; IMPINGEMENT ANGLE; INTERNAL ENERGIES; LASER-BASED POWDER DEPOSITIONS; MATERIAL COMPOSITIONS; MULTI-LAYERED; NICKEL-TUNGSTEN; SLURRY EROSION; SOFT INTERLAYER; SOLID PARTICLE EROSION; TARGET MATERIALS;

COMPOSITE MATERIALS; EROSION; FINITE ELEMENT METHOD; NICKEL; STRESS CONCENTRATION; TUNGSTEN;

TUNGSTEN CARBIDE;

EID: 84874753445     PISSN: 0301679X     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.triboint.2013.01.021     Document Type: Article

References (31)

1. MS Eltobgy, and MA. Elbestawi Finite element modeling of erosive wear International Journal of Machine Tools and Manufacture 45 2005 1337 1346 (Pubitemid 40643809)
2. RJ. David Surface engineering for corrosion and wear resistance 2001 ASM International Material Park, Ohio
3. D Aquaro, and E. Fontani Erosion of ductile and brittle materials Mecanica 36 2001 651 661 (Pubitemid 34950331)
4. IM. Hutchings Tribology: friction and wear of engineering materials 1992 Butterworth-Heinemann Ltd London
5. RG Rateick, KR Karasek, AJ Cunningham, KC Goretta, and JL. Routbort Solid-particle erosion of tungsten carbide/cobalt cermet and hardened 440C stainless steel - a comparison Wear 261 2006 773 778 (Pubitemid 44404217)
6. K Shimizu, T Noguchi, H Seitoh, M Okada, and Y. Matsubara FEM analysis of erosivewear Wear 250 2001 779 784
7. M Bielawski, and WFE. Beres Modeling of surface stresses in erosion-resistant coatings under single particle impact Wear 262 2007 167 175 (Pubitemid 44750083)
8. Q Chen, and DY. Li Computer simulation of solid particle erosion Wear 254 2003 203 210 (Pubitemid 36405624)
9. Q Chen, and DY. Li Computer simulation of solid-particle erosion of composite materials Wear 255 2003 78 84 (Pubitemid 36964965)
10. S Hassani, JE Klemberg-Sapieha, M Bielawski, W Beres, L Martinu, and M. Balazinski Design of hard coating architecture for the optimization of erosion resistance Wear 265 2008 879 887
11. PJ Woytowitz, and RH. Richman Modeling of damage from multiple impacts by spherical particles Wear 233 1999 120 133 (Pubitemid 30087009)
12. D Griffin, A Daadbin, and S. Datta The development of a three-dimensional finite element model for solid particle erosion on an alumina scale/MS956 substrate Wear 256 2004 900 906 (Pubitemid 38583252)
13. M Junkar, B Jurisevic, M Fajdiga, and M. Grah Finite element analysis of single-particle impact in abrasive water jet machining International Journal of Impact Engineering 32 2006 1095 1112 (Pubitemid 41815196)
14. Y Eshwar, and R. Kovacevic Numerical simulation and characterization of slurry erosion of laser cladded surfaces by using failure analysis approach Journal of Failure Analysis and Prevention 7 2007 464 474
15. Yu-Fei Wang, and Zhen-Guo Yang Finite element model of erosive wear on ductile and brittle materials Wear 265 2008 871 878
16. L Ma, Bao Rong-hao, and Yi-mu Guo Water jet penetration simulation by hybrid code SPH and FEA International Journal of Impact Engineering 35 2008 1035 1042 (Pubitemid 351680512)
17. Yui-Fei Wang, and Zhen-Guo Yang A coupled finite element and meshfree analysis of erosive wear Tribology International 42 2009 373 377
18. Kovacevic R, Valant M. System and method for fabrication or repairing part 2006, US Patent#7; 020: 539.
19. Balu P, Leggett P, Kovacevic R. Parametric study on a coaxial multi-material powder flow in laser-based powder deposition process. Journal of Materials Processing Technology 2012; 212: 1598-610.
20. ANSYS LS-DYNA Theoretical Manual 2006, Livermore Software Technology Corporation, Canonsburg.
21. ANSYS LS-DYNA User's Guide 2009, Livermore Software Technology Corporation, Canonsburg.
22. AW Momber, R Kovacevic, and H. Kwak Alternative method for the evaluation of the abrasive water-jet cutting of grey cast iron Journal of Materials Processing Technology 65 1997 65 72 (Pubitemid 127417283)
23. Vasek J, Martinec P, Foldyna J. Influence of properties of garnet on AWJ cutting process. In: Proceedings of the seventh American water-jet conference 1, Water-jet Technical Association; 1993, St. Louis, 521-537.
24. Aquaro D. Erosion rate of stainless steel due to the impact of solid particles. International conference on tribology; 2006. p.1-15.
25. ANSYS LS-DYNA Keyword Users Manual, 2005, Livermore Software Technology Corporation, Canonsburg.
26. A Neville, F Reza, S Chiovelli, and T. Revega Erosion-corrosion behavior of WC-based MMCs in liquid-solid slurries Wear 259 2005 181 195
27. H Kutaran, M Buyuk, and A. Eskandarian Ballistic impact simulation of GT model vehicle door using finite element method Theoretical and Applied Fracture Mechanics 40 2003 113 121 (Pubitemid 37061250)
28. CM Weisbrook, and AD. Krawitz Thermal residual stress distribution in WC-Ni composites Materials Science and Engineering A 209 1996 318 328 (Pubitemid 126383455)
29. LS Sigl, and S. Schmauder A finite element study of crack growth in WC-Co International Journal of Fracture 36 1988 305 317 (Pubitemid 18611731)
30. M Duraiselvam, R Galun, V Wesling, and BL. Mordike Laser clad WC reinforce Ni-based intermetallic-matrix composites to improve cavitation erosion resistance Journal of Laser Applications 18 4 2006 297 304 (Pubitemid 44857480)
31. WH Jiang, and R. Kovacevic Laser deposited TiC/H13 tool steel composite coatings and their erosion resistance Journal of Materials Processing Technology 186 2007 331 338 (Pubitemid 46330748)