Cavitation induced breakup model for multi-component fuel spray

10th International Conference on Liquid Atomization and Spray Systems, ICLASS 2006

Volumn , Issue , 2006, Pages

  Wada, Yoshimitsu ^a   Senda, Jiro ^a  

^a DOSHISHA UNIVERSITY   (Japan)

Author keywords

Breakup; Cavitation; Diesel spray; Multi component fuel

Indexed keywords

BREAKUP MODELS; CAVITATION BUBBLE; DIESEL SPRAY; INJECTOR NOZZLE; INTERNAL FLOWS; KIVA-3V; LARGE DISTURBANCE; LIQUID JETS; LIQUID VAPOR EQUILIBRIUM; MULTICOMPONENT FUEL; MULTICOMPONENTS; NOZZLE HOLES; PRIMARY BREAKUPS; SPRAY MODEL; TAYLOR ANALOGY;

ATOMIZATION; CAVITATION; CHEMICAL ANALYSIS; DISTILLATION; DROP BREAKUP; JETS; LIQUIDS; NOZZLES; THERMODYNAMICS;

FUELS;

EID: 84874701408     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: None     Document Type: Conference Paper

References (36)

1. Fujimoto, H., Sugihara, H., Tanabe, H. and Sato, G. T., Investigation on Combustion in Medium-Speed Marine Diesel Engines Using Model Chambers, 14th CIMAC (Helsinki), D38, 1981.
2. O'Rourke, P. J. and Amsden, A. A., The TAB Method for Numerical Calculation of Spray Droplet Breakup, SAE Technical Paper 872089, 1987.
3. Reitz, R. D. and Diwakar, R., Structure of High-Pressure Fuel Sprays, SAE Technical Paper 870598, 1987.
4. Huh, K. Y. and Gosman, A. D., A Phenomenological Model of Diesel Spray Atomization, Proc., the International Conf. on Multiphase Flows '91-Tsukuba, pp.515-518, 1991.
5. Bracco, F. V., Modeling of Engine Sprays, SAE Technical Paper 850394, 1985.
6. Lefebvre, A. H., Atomization and Sprays, Hemisphere Pub. Co., New York, 1989.
7. Arai, M., Shimizu, M. and Hiroyasu, H., Similarity between the Break-Up Lengths of A High Speed Liquid Jet in Atmospheric and Pressurized Conditions, Proc., 5th ICLASS-91, (Gaithersburg), pp.563-570, 1991.
8. Dan, T., Yamamoto, T., Senda, J. and Fujimoto, H., Effect of Nozzle Configurations for Characteristics of Non-Reacting Diesel Fuel Spray, SAE Technical Paper 970355, 1997.
9. Kim, J. H., Nishida, K. and Hiroyasu, H., Characteristics of the Internal Flow in a Diesel Injection Nozzle, Proc., 7th ICLASS-97, (Seoul), pp.175-182, 1997.
10. Hiroyasu, H., Arai, M. and Shimizu, M., Break-Up Length of A Liquid Jet and Internal Flow in a Nozzle, Proc., 5th ICLASS-91, (Gaithersburg), pp.275-282, 1991.
11. Bergwerk, W., Flow Pattern in Diesel Nozzle Spray Holes, Proc., Instn. Mech. Engrs., Vol. 173, No. 25, pp.655-660, 1959.
12. Soteriou, C., Andrews, R. and Smith, M., Direct Injection Diesel Sprays and the Effect of Cavitation and Hydraulic Flip on Atomization, SAE Technical Paper 950080, 1995.
13. Chaves, H., Knapp, M. and Kubitzek, A., Experimental Study of Cavitation in the Nozzle Hole of Diesel Injectors Using Transparent Nozzles, SAE Technical Paper 950290, 1995.
14. Iida, H., Matsumura, E., Senda, J., Fujimoto, H. and Maly, R. R., Effect of Internal Flow in a Simulated Diesel Injection Nozzle on Spray Atomization, Proc. of ICLASS-2000, (Pasadena), 2000.
15. Kawano, D., Senda, J., Wada, Y. and Fujimoto, H., Numerical Simulation of Multicomponent Fuel Spray, SAE2003-01-1838, 2003.
16. Kawano, D., Goto, Y., Odaka, M. and Senda, J., Modeling Atomization and Vaporization Processes of Flash-Boiling Spray, SAE2004-01-0534, 2004.
17. Arcoumanis, C. and Gavaises, M., Linking the Nozzle Flow with Spray Characteristics in a Diesel Fuel Injector System, Atomization and Sprays, Vol. 8, Issue 3, 1998.
18. Nishimura, A. and Assanis, D. N., A Model for Primary Diesel Fuel Atomization Based on Cavitation Bubble Collapse Energy, Proc., ICLASS-2000, (Pasadena), 2000.
19. Habchi, C., Verhoeven, D., Huu, H., Lambert, L., Vanhemelryck, L. and Baritaud, T., Modeling Atomization and Break Up in High-Pressure Diesel Sprays, SAE Technical Paper 970881, 1997.
20. Rotondi, R., Bella, G., Grimaldi, C. and Postrioti, L., Atomization of High-Pressure Diesel Spray: Experimental Validation of a New Breakup Model, SAE Technical Paper 2001-01-1070, 2001.
21. Bianchi, G. M., Pelloni, P., Corcione, F. E., Allocca, L. and Luppino, F., Modeling Atomization of High-Pressure Diesel Sprays, Engrg. for Gas Turbines and Power, Vol. 123, Issue 2, pp.419-427, 2001.
22. Adachi, M., McDonell, V. G., Tanaka, D., Senda, J. and Fujimoto, H., Characterization of Fuel Vapor Concentration Inside a Flash Boiling Spray, SAE Technical Paper 970871, 1997.
23. Ely, J. F. et al., NIST Thermophysical Properties of Hydrocarbon Mixture Database (SUPERTRAPP) User's Guide, 1992.
24. Liu, Z. and Brennen, C. E., Cavitation Nuclei Population and Event Rates, Trans. ASME, Vol. 120, pp.728-737, 1998.
25. Billet, M. L., Cavitation Nuclei Measurements - A Review, 20th Anniversary Issue: Cavitation and Multiphase Flow Forum, FED-Vol. 23, pp.31-38, 1985.
26. Stralen, S. V. and Cole, R., Boiling Phenomena, 1, Hemisphere Pub., Co., Bristol, 1979.
27. Sarre, C. K., Kong, S. C. and Reitz, R. D., Modeling the Effects of Injector Nozzle Geometry on Diesel Sprays, SAE Technical Paper 1999-01-0912, 1999.
28. Payri, R., Garcia, J. M., Salvador, F. J. and Gimeno, J., Using Spray Momentum Flux Measurements to Understand the Influence of Diesel Nozzle Geometry on Spray Characteristics, FUEL, Vo. 84, pp.551-561, 2005.
29. Nurick, W. H., Orifice Cavitation and Its Effect on Spray Mixing, Fluids Engrg., Vol. 98, pp.681-687, 1976.
30. Hammitt, F. G., Cavitation and Multiphase Flow Phenomena, McGRAW-HILL Inc., New York, 1980.
31. Shima, A. et al., Memoirs of the Institute of High Speed Mechanics, Tohoku University, Vol. 46, No. 407, 1981, (in Japanese).
32. Amsden, A. A., KIVA-3V: A Block-Structured KIVA Program for Engines with Vertical or Canted Valves, Los Alamos National Laboratory Report LA-13313-MS, 1997.
33. Lee, E. and Huh, K. Y., Development of a Diesel Spray Atomization Model Considering Nozzle Flow Characteristics, Proc., 7th ICLASS-97, (Seoul), pp.828-835, 1997.
34. Reitz, R. D., Modeling Atomization Processes in High-Pressure Vaporizing Sprays, Atomization and Spray Technology, Vol. 3, No. 4, pp.309-337, 1987.
35. Su, T. F., Patterson, M. A., Reitz, R. D. and Farrell, P. V., Experimental and Numerical Studies of High Pressure Multiple Injection Sprays, SAE Technical Paper 960861, 1996.
36. Dan, T., Senda, J. and Fujimoto, H., Organized Structure and Motion in Diesel Spray, SAE Technical Paper 970641, 1997.