Effect of nanoclay and magnesium hydroxide on some properties of HDPE/wheat straw composites

Fibers and Polymers

Volumn 14, Issue 2, 2013, Pages 304-310

  Liany, Yaghob ^b   Tabei, Asghar ^b   Farsi, Mohammad ^a   Madanipour, Mostafa ^b  

^a ISLAMIC AZAD UNIVERSITY   (Iran)

^b ISLAMIC AZAD UNIVERSITY   (Iran)

Author keywords

Burning rate; Composites; Flame retardant; Magnesium hydroxide; Mechanical properties; Nanoclay

Indexed keywords

ASTM STANDARDS; BIO-BASED COMPOSITES; BURNING RATE; ENVIRONMENTAL-FRIENDLY; GRAFTED POLYETHYLENE; INJECTION MOLDING PROCESS; MAGNESIUM HYDROXIDE; MECHANICAL PERFORMANCE; MELT-COMPOUNDING; NANO CLAYS;

COMPOSITE MATERIALS; FLAME RETARDANTS; IMPACT STRENGTH; MALEIC ANHYDRIDE; MECHANICAL PROPERTIES; TENSILE STRENGTH;

NANOCOMPOSITES;

CLAY; COMBUSTION; COMPOSITES; FLAME RETARDANTS; IMPACT STRENGTH; MAGNESIUM HYDROXIDE; MALEIC ANHYDRIDE; TENSILE STRENGTH; WHEAT STRAW;

EID: 84874556976     PISSN: 12299197     EISSN: None     Source Type: Journal    
DOI: 10.1007/s12221-013-0304-3     Document Type: Article

References (44)

1. A. Alemdar and M. Sain, Biores. Tech., 99, 6 (2008).
2. Y. Copur, C. Guler, M. Akgul, and C. Tascioglu, Build. Environ., 42, 2568 (2007).
3. X. F. Sun, R. C. Sun, J. Tomkinson, and M. S. Baird, Polym. Degrad. Stab., 83, 47 (2004).
4. N. M. White and M. P. Ansell, J. Mater. Sci., 18, 1549 (1983).
5. P. R. Hornsby, E. Hinrichsen, and K. Trivedi, J. Mater. Sci., 32, 443 (1997a).
6. P. R. Hornsby, E. Hinrichsen, and K. Trivedi, J. Mater. Sci., 32, 1009 (1997b).
7. L. Dobircau, P. A. Sreekumar, R. Saiah, N. Leblanc, C. Terrié, R. Gattin, and J. M. Saiter, Compos. Part A, 40, 329 (2009).
8. C. J. Hilado, "Flammability Handbook for Plastics", 5th ed., Technomic Publishing Co., Lancaster, Pennsylvania, 1998.
9. M. Sain, S. H. Park, F. Suhara, and S. Law, Polym. Degrad. Stab., 83, 363 (2004).
10. N. Suppakarn and K. Jarukumjorn, Compos. Part B-Eng., 40, 613 (2009).
11. N. M. Stark, R. H. White, S. A. Mueller, and T. A. Osswald, Polym. Degrad. Stab., 95, 1903 (2010).
12. B. Li and J. He, Polym. Degrad. Stab., 83, 241 (2004).
13. S. Z. Matko, A. Toldy, S. Keszei, P. Anna, G. Y. Bertalan, and G. Y. Marosi, Polym. Degrad. Stab., 88, 138 (2005).
14. E. Gallo, B. Schartel, D. Acierno, and P. Russo, Eur. Polym. J., 47, 1390 (2011).
15. G. Beyer, Fire Mater., 26, 291 (2002).
16. T. Kashiwagi, F. Du, J. F. Douglas, K. I. Winey, R. H. Harris, and J. R. Shields, Nat. Mater., 4, 928 (2005).
17. J. W. Gilman, Appl. Clay Sci., 15, 31 (1999).
18. Y. Zhao, K. Wang, F. Zhu, P. Xue, and M. Jia, Polym. Degrad. Stab., 91, 2874 (2006).
19. M. Kozlowski, A. Iwanczuk, S. Frackowiak, and T. Szczurek, "Proceedings of the International Sustainable Materials, Polymers & Composites Conference", Warwick, September 11-12, 2007.
20. B. Kord, J. Appl. Polym. Sci., 120, 607 (2011).
21. A. P. Mouritz and A. G. Gibson in "Fire Properties of Polymer Composite Materials" (G. M. L. Gladwell Ed.), pp. 237-286, Springer, The Netherlands, 2006.
22. C. M. Liauw, R. N. Rothon, G. C. Lees, and I. Zafar, J. Adhes. Sci. Technol., 15, 889 (2001).
23. J. C. Yu, A. W. Xu, L. Z. Zhang, R. Song, and L. Wu, J. Phys. Chem. B, 108, 64 (2004).
24. J. W. Gilman, R. D. Davis, J. R. Shields, D. Wentz, L. D. Brassell, A. B. Morgan, R. Lyon, and J. E. Zanetto, "Proceedings of the International SAMPE Technical Conference", San Diego, USA, November 15-18, 2004.
25. Z. X. Zhang, J. Zhang, B. X. Lu, Z. X. Xin, C. K. Kang, and J. K. Kim, Compos. Part B-Eng., 43, 150 (2011).
26. C. M. Koo, H. T. Ham, S. O. Kim, K. H. Wang, and I. Chung, Macromol., 35, 5116 (2002).
27. Q. Wu, Y. Lei, C. M. Clemons, F. Yao, Y. Xu, and K. Lian, J. Plast. Technol., 27, 108 (2007).
28. Y. Lei, Q. Wu, C. M. Clemons, F. Yao, and Y. Xu, J. Appl. Polym. Sci., 106, 3958 (2007).
29. H. Chen, M. Wang, Y. Lin, C. M. Chan, and J. Wu, J. Appl. Polym. Sci., 106, 3409 (2007).
30. S. K. Samal, S. Nayak, and S. Mohanty, J. Thermoplast. Compos., 21, 243 (2008).
31. A. Ashori and A. Nourbakhsh, J. Compos. Mater., 43, 1869 (2009).
32. J. Fu and H. E. Naguib, J. Cell. Plast., 42, 325 (2006).
33. L. S. Schadler in "Nanocomposite Science and Technology" (P. M. Ajayan, L. S. Schadler, and P. V. Braun Eds.), pp. 77-154, Wiley-VCH Verlag, Weinheim, 2003.
34. S. Chapple and R. Anandjiwala, J. Thermoplast. Compos., 23, 871 (2010).
35. T. D. Hapuarachchi and T. Peijs, Compos. Part A-Appl. S., 41, 954 (2010).
36. G. I. Titleman, Y. Gonen, Y. Keidar, and S. Bron, Polym. Degrad. Stab., 77, 345 (2002).
37. J. Inne and A. Innes, Plast. Addit. Compound., 4, 22 (2002).
38. Y. Dong, D. Bhattacharyya, and P. J. Hunter, Compos. Sci. Technol., 68, 2864 (2008).
39. S. H. Chiu and W. K. Wang, J. Appl. Polym. Sci., 67, 989 (1998).
40. H. Dvira, M. Gottlieb, S. Darenb, and E. Tartakovskyb, Compos. Sci. Technol., 63, 1865 (2003).
41. E. A. J. Al-Mulla, Fiber. Polym., 12, 444 (2011).
42. A. Boukerrou, J. Duchet, S. Fellahi, M. Kaci, and H. Sautereau, J. Appl. Polym. Sci., 103, 3547 (2007).
43. T. C. Li, J. Ma, M. Wang, W. Chauhari, T. Liu, and W. Huang, J. Appl. Polym. Sci., 103, 1191 (2007).
44. P. Mareri, S. Bastide, N. Binda, and A. Crespy, Compos. Sci. Technol., 58, 747 (1998).