Role of different nanoparticles in elastomeric nanocomposites

Advanced Structured Materials

Volumn 9, Issue , 2011, Pages 3-55

  Kim, Jin Kuk ^a   Pal, Kaushik ^a   Sridhar, V ^a  

^a Gyeongsang National University   (South Korea)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 84874256187     PISSN: 18698433     EISSN: 18698441     Source Type: Book Series    
DOI: 10.1007/978-3-642-15787-5_1     Document Type: Article

References (147)

1. Kraus, G.: Reinforcement in Elastomers. Wiley-Interscience, New York (1965)
2. Morton-Jones, D.H.: Polymer Processing. Chapman and Hall, London (1989)
3. Ismail, H., Poh, B.T., Tan, K.S., Moorthy, M.: Effect of filler loading on cure time and swelling behaviour of SMR L/ENR 25 and SMR L/SBR blends. Polym. Int. 52, 685 (2003)
4. Ismail, H., Poh, B.T., Tan, K.S.: Effect of filler loading on tensile and tear properties of SMR L/ENR 25 and SMR L/SBR blends cured via a semi-efficient vulcanization system. Polym. Test 21, 801 (2002)
5. Spurr, R.T.: Fillers in friction materials. Wear 22, 367 (1972)
6. Debnath, S.: Mica as reinforcing filler in elastomeric composites. Ph.D. thesis, Rubber Technology Center, IIT Kharagpur, India (2000)
7. Bajaj, P., Babu, G.N., Khanna, D.N., Varshney, S.K.: Room temperature-vulcanized silicone elastomer: effect of curing conditions and the nature of filler on mechanical and thermal properties. J. Appl. Polym. Sci. 23, 3505 (1979)
8. Kwei, T.K., Kunins, C.A.: Polymer-filler interaction: vapor sorption studies. J. Appl. Polym. Sci. 8, 1483 (1964)
9. Krysztafkiewicz, A.: Modified calcium silicates as active rubber fillers. J. Mater. Sci. 22, 478 (1987)
10. Varma, A.J., Deshpande, M.D., Nadkarni, V.M.: Morphology and mechanical properties of silicate filled polyurethane elastomers based on castor oil and polymeric MDI. Angew. Makromol Chem. 132, 203 (1985)
11. Shepard, N.A., Street, J.R., Park, C.R.: Fillers and reinforcing agents. In: Davis, C.C., Blake, J.T. (eds.) ACS Monograph Series. New York, Chap 11 (1937)
12. Hamed, G.R., Park, B.H.: The mechanism of carbon black reinforcement of SBR and NR vulcanizates. Rubber Chem. Technol. 72, 946 (1999)
13. Medalia, A.I., Kraus, G.: Reinforcement of elastomers by particulate fillers. In: Mark, J.E., Erman, B., Eirich, F.R. (eds.) Science and Technology of Rubber, p. 378. Academic Press, San Diego (1994)
14. Leblanc, J.L.: Rubber-filler interactions and rheological properties in filled compounds. Prog. Polym. Sci. 27, 627 (2002)
15. Schmidt, E.: Effect of colloidal noncarbon pigments on elastomer properties. Ind. Eng. Chem. 43, 679 (1951)
16. Studebaker, M.L.: A useful new system for categorizing rubber grade carbon blacks. Technical Bulletin-Phillips Petroleum Co (1971)
17. Wagner, M.P.: Non black fillers in elastomers. Rubber World 164, 46 (1941)
18. Fowkes, F.M.: Attractive forces at interfaces. Ind. Eng. Chem. 56, 40 (1964)
19. Gent, A.N., Tompkins, D.A.: Nucleation and growth of gas bubbles in elastomers. J. Appl. Phys. 40, 2520 (1969)
20. Gent, A.N.: Detachment of an elastic matrix from a rigid spherical inclusion. J. Mat. Sci. 15, 2884 (1980)
21. Huber, G., Vilgis, T.A.: On the mechanism of hydrodynamic reinforcement in elastic composites. Macromolecules 35, 9204 (2002)
22. Heinrich, G., Kluppel, M., Vilgis, T.A.: Reinforcement of elastomers. Curr. Opin. Solid State Mater. Sci. 6, 195 (2002)
23. Kroto, H.W., Heath, J.R., O'Brien, S.C., Curl, R.F., Smalley, R.E.: C60: buckminsterfullerene. Nature 318, 162 (1985)
24. Ijima, S.: Helical microtubules of graphitic carbon. Nature 354, 56 (1991)
25. Hutchison, J.L., Kiselev, N.A., Krinichnaya, E.P., Krestinin, A.V., Loutfy, R.O., Morawsky, A.P., Muradyan, V.E., Obraztsova, E.D., Sloan, J., Terekhov, S.V., Zakharov, D.N.: Double-walled carbon nanotubes fabricated by a hydrogen arc discharge method. Carbon 39, 761 (2001)
26. Saito, Y., Nakahira, T., Uemura, S.: Growth conditions of double-walled carbon nanotubes in arc discharge. J. Phys. Chem. B 107, 931 (2003)
27. Arepalli, S.: Laser ablation process for single-walled carbon nanotube production. J. Nanosci. Nanotech. 4, 317 (2004)
28. Jiang, W., Molian, P., Ferkel, H.: Rapid production of carbon nanotubes by high-power laser ablation. J. Manuf. Sci. Eng. 127, 703 (2005)
29. Endo, M., Hayashi, T., Kim, Y.A., Muramatsu, H.: Development and application of carbon nanotubes. Jpn. J. Appl. Phys. 45, 4883 (2006)
30. Hughes, T.V., Chambers, C.R.: Manufacture of carbon filaments. US Patent 405480 (1889)
31. Robertson, S.D.: Graphite formation from low temperature pyrolysis of methane over some transition metal surfaces. Nature 221, 1044 (1969)
32. Audier, M., Oberlin, A., Coulon, A.: Crystallographic orientations of catalytic particles in filamentous carbon; case of simple conical particles. J. Cryst. Growth 55, 549 (1981)
33. Schouten, F.C., Kaleveld, E.W., Bootsma, G.A.: AES-LEED-ellipsometry study of the kinetics of the interaction of methane with Ni(110). Surf. Sci. 63, 460 (1977)
34. Zaikovskii, V.I., Chesnokov, V.V., Buyanov, R.A.: High-resolution electron microscopic study of the structure of filamentary carbon on iron and nickel catalysts. Appl. Catal. 38, 41 (1988)
35. Fisa, B., Sanschagrin, B., Favis, B.: Mechanical degradation of mica during processing with polypropylene. Polym. Compos. 5, 264 (1984)
36. Kamisnki, S.J.: Resinous polymer sheet materials having selective, decorative effects. US Patent No. 4126727 (1976)
37. Garton, A.: Characterization of the interface: some initial results for mica-polypropylene composites. Polym. Compos. 3, 189 (1982)
38. Favis, B.D., Blanchard, L.P., Leonard, J., Prudapos-Homme, R.E.: The formation of coupling agent monolayers on the surface of mica. Polym. Compos. 5, 11 (1984)
39. Tausz, S.E., Chaffey, C.E.: Ultrasonically delaminated and coarse mica particles as reinforcements for polypropylene. J. Appl. Polym. Sci. 27, 4493 (1982)
40. Eldred, R.J.: Dimensional control of swelling in nitrile elastomers by anisometric fillers. Rubber World 188, 26 (1983)
41. Chen, C.H., Ma, C.C.M.: Pultruded fiber reinforced blocked polyurethane (PU) composites. II. Processing variables and dynamic mechanical properties. J. Appl. Polym. Sci. 46, 949 (1992)
42. Jilken, L., Malhammar, G., Selden, R.: The effect of mineral fillers on impact and tensile properties of polypropylene. Polym. Test 10, 329 (1991)
43. Yoshikawa, M., Niwa, H., Fukuura, Y., Naito, K.: Low permeable nitrile rubber hose. US Patent No. 5476121 (1995)
44. Debnath, S., De, S.K., Khastgir, D.: Effect of silane coupling agent on vulcanization, network structure, polymer-filler interaction, physical properties and failure mode of mica- filled styrene-butadiene rubber. J. Mater. Sci. 22, 4453 (1987)
45. Brown, J.M., Curliss, D., Vaia, R.A.: Thermoset-layered silicate nanocomposites. Quaternary ammonium montmorillonite with primary diamine cured epoxies. Chem. Mater. 12, 3376 (2000)
46. Zanetti, M., Camino, G., Canavese, D., Morgan, A.B., Lamelas, F.J., Wilkie, C.A.: Fire retardant halogen-antimony-clay synergism in polypropylene layered silicate nanocomposites. Chem. Mater. 14, 189 (2002)
47. Chang, J.H., Jang, T.G., Ihn, K.J., Lee, W.K., Sur, G.S.: Poly(vinyl alcohol) nanocomposites with different clays: pristine clays and organoclays. J. Appl. Polym. Sci. 90, 3208 (2003)
48. Kanzaki, Y., Hayashi, M., Minami, C., Inoue, Y., Kogure, M., Watanabe, Y., Tanaka, T.: Intercalation and bilayer formation of phospholipids in layered synthetic mica-2. Solvent effect of the intercalation reaction of natural and reduced-type phosphatidylcholines. Langmuir 13, 3674 (1997)
49. Carrado, K.A., Xu, L., Csencsits, R., Muntean, J.V.: Use of organo- and alkoxysilanes in the synthesis of grafted and pristine clays. Chem. Mater. 13, 3766 (2001)
50. Osman, M.A., Mittal, V., Morbidelli, M., Suter, U.W.: Polyurethane adhesive nanocomposites as gas permeation barrier. Macromolecules 36, 9851 (2003)
51. Liu, L., Qi, Z., Zhu, X.: Studies on nylon 6/clay nanocomposites by melt-intercalation process. J. Appl. Polym. Sci. 71, 1133 (1999)
52. Alexandre, M., Dubois, P.: Polymer-layered silicate nanocomposites: preparation, properties and uses of a new class of materials. Mater. Sci. Eng. R 28, 1 (2000)
53. Lee, D.C., Jang, L.K.: Preparation and characterization of PMMA-clay hybrid composite by emulsion polymerization. J. Appl. Polym. Sci. 61, 1117 (1996)
54. Vaia, R.A., Vasudevan, S., Krawiec, W., Scanlon, L.G., Giannelis, E.P.: New polymer electrolyte nanocomposites: melt intercalation of poly(ethylene oxide) in mica-type silicates. Adv. Mater. 7, 154 (1995)
55. Hitzky, E.R., Pilar, A.: Polymer-salt intercalation complexes in layer silicates. Adv. Mater. 2, 545 (1990)
56. Liu, L., Qi, Z., Zhu, X.: Studies on nylon 6/clay nanocomposites by melt-intercalation process. J. Appl. Polym. Sci. 1133 (1999)
57. Messersmith, P.B., Stupp, S.I.: Synthesis of nanocomposites: organoceramics. J. Mater. Res. 7, 2599 (1992)
58. Okada, A., Fukumori, A., Usuki, A., Kojima, Y., Kuruachi, T., Kamigaito, O.: Rubber-clay hybrid synthesis and properties. Polym. Prep. 32, 540 (1991)
59. Wang, Z., Pinnavaia, T.J.: Nanolayer reinforcement of elastomeric polyurethane. Chem. Mater. 10, 3769 (1998)
60. Joly, S., Garnaud, G., Ollitrault, R., Bokobza, L., Mark, J.E.: Organically modified layered silicates as reinforcing fillers for natural rubber. Chem. Mater. 14, 4202 (2002)
61. Varghese, S., Karger-Kocsis, J., Gatos, K.G.: Melt compounded epoxidized natural rubber/ layered silicate nanocomposites: structure-properties relationships. Polymer 44, 3977 (2003)
62. Arroyo, M., Lopez-Manchado, M.A., Herrero, B.: Organo-montmorillonite as substitute of carbon black in natural rubber compounds. Polymer 44, 2447 (2003)
63. Mousa, A., Karger-Kocsis, J.: Rheological and thermodynamical behavior of styrene/ butadiene rubber-organoclay nanocomposites. Macromol. Mater. Eng. 286, 260 (2001)
64. Kojima, Y., Fukumori, K., Usuki, A., Okada, A., Kurauchi, T.: Gas permeabilities in rubberclay hybrid. Mater. Sci. Lett. 12, 12 (1993)
65. Chang, Y.W., Yang, Y., Ryu, S., Nah, C.: Preparation and properties of EPDM/ organomontmorillonite hybrid nanocomposites. Polym. Int. 51, 319 (2002)
66. Wang, S., Long, C., Wang, X., Li, Q., Qi, Z.: Synthesis and properties of silicone rubber/ organomontmorillonite hybrid nanocomposites. J. Appl. Polym. Sci. 69, 1557 (1998)
67. Kader, M.A., Nah, C.: Influence of clay on the vulcanization kinetics of fluoroelastomer nanocomposites. Polymer 45, 2237 (2004)
68. Kokabi, M., Razzaghi-Kashani, M., Hasankhani, H.: Improvement in physical and mechanical properties of butyl rubber with montmorillonite organo-clay. Ir. J. Polym. Sci. 16, 10 (2007)
69. Sridhar, V., Chaudhary, R.N.P., Tripathy, D.K.: Effect of fillers on the relaxation behavior of chlorobutyl vulcanizates. J. Appl. Polym. Sci. 100, 3161 (2006)
70. Novak, I., Krupa, I.: Electro-conductive resins filled with graphite for casting applications. Eur. Polym. J. 40, 1417 (2004)
71. Coleman, J.N., Khan, U., Gunko, Y.K.: Mechanical reinforcement of polymers using carbon nanotubes. Adv. Mater. 18, 689 (2006)
72. Monte, S.J.: Titanate coupling agents. In: Xanthos, M. (ed.) Functional Fillers for Plastics. Wiley-VCH Verlag GmbH (2005)
73. Lyatskaya, Y., Balazs, A.C.: Modeling the phase behavior of polymer-clay composites. Macromolecules 31, 6676 (1998)
74. Ginzburg, V.V., Balazs, A.C.: Calculating phase diagrams of polymer-platelet mixtures using density functional theory: implications for polymer/clay composites. Macromolecules 32, 5681 (1999)
75. Ginzburg, V.V., Singh, C., Balazs, A.C.: Theoretical phase diagrams of polymer/clay composites: the role of grafted organic modifiers. Macromolecules 33, 1089 (2000)
76. Mori, T., Tanaka, K.: Average stress in matrix and average elastic energy of materials with misfitting inclusions. Acta Metall. 21, 571 (1973)
77. Tandon, G.P., Weng, G.J.: The effect of aspect ratio of inclusions on the elastic properties of unidirectionally aligned composites. Polym. Compos. 5, 327 (1984)
78. Fornes, T.D., Paul, D.R.: Modeling properties of nylon 6/clay nanocomposites using composite theories. Polymer 44, 4993 (2003)
79. Fischer, H.: Polymer nanocomposites: from fundamental research to specific applications. Mater. Sci. Eng. C 23, 763 (2003)
80. Schaefer, D.W., Justice, R.S.: How nano are nanocomposites. Macromolecules 40, 501 (2007)
81. Kraus, G.: Reinforcement of elastomers by carbon black. Adv. Polym. Sci. 8, 115 (1971)
82. Payne, A.R.: Effect of dispersion on the dynamic properties of filler-loaded rubbers. J. Appl. Polym. Sci. 9, 2273 (1965)
83. Bradshaw, R.D., Fisher, F.T., Brisnon, L.C.: Fiber waviness in nanotube-reinforced polymer composites. II. Modeling via numerical approximation of the dilute strain concentration tensor. Compos. Sci. Technol. 63, 1705 (2003)
84. Thostenson, E.T., Chou, T.W.: On the elastic properties of carbon nanotube-based composites: modelling and characterization. J. Phys. D Appl. Phys. 36, 573 (2003)
85. Schadler, L.S., Giannaris, S.C., Ajayan, P.M.: Load transfer in carbon nanotube epoxy composites. Appl. Phys. Lett. 73, 3842 (1998)
86. Ajayan, P.M., Schadler, L.S., Giannaris, S.C., Rubio, A.: Single-walled carbon nanotubepolymer composites: strength and weakness. Adv. Mater. 12, 750 (2000)
87. Wong, M., Paramsothy, M., Xu, X.J., Ren, Y., Li, S., Liao, K.: Physical interactions at carbon nanotube-polymer interface. Polymer 44, 7757 (2003)
88. Gojny, F.H., Wichmann, M.H.G., Fiedler, B., Schulte, K.: Influence of different carbon nanotubes on the mechanical properties of epoxy matrix composites-a comparative study. Compos. Sci. Technol. 65, 2300 (2005)
89. Gojny, F.H., Nastalczyk, J., Roslaneic, Z., Schulte, K.: Surface modified multi-walled carbon nanotubes in CNT/epoxy-composites. Chem. Phys. Lett. 370, 820 (2003)
90. Dyke, C.A., Tour, J.M.: Covalent functionalization of single-walled carbon nanotubes for materials applications. J. Phys. Chem. A 108, 11151 (2004)
91. Haluska, M., Hulman, M., Hirscher, M., Becher, M., Roth, S., Stepanek, I., Bernier, P.: Proceedings of AIP conference on electronic properties of molecular nanostructures, 591, 603 (2001)
92. Chen, J., Dyer, M.J., Yu, M.F.: Cyclodextrin-mediated soft cutting of single-walled carbon nanotubes. J. Am. Chem. Soc. 123, 6201 (2001)
93. Hilding, J., Grulke, E.A., Zhang, Z.G., Lockwood, F.: Dispersion of carbon nanotubes in liquids. J. Disp. Sci. Technol. 24, 1 (2003)
94. Pierard, N., Fonseca, A., Colomer, J.F., Bossout, C., Benoit, J.M., Van Tendeloo, G., Pirard, J.P., Nagy, J.B.: Ball milling effect on the structure of single-wall carbon nanotubes. Carbon 42, 1691 (2004)
95. Konya, Z., Vesselneyi, K., Niesz, A., Demortier, A., Fonseca, J., Delhalle, Z.: Large scale production of short functionalized carbon nanotubes. Chem. Phys. Lett. 360, 429 (2002)
96. Lee, J.H., Jeong, T., Heo, J., Park, S.H., Lee, D.H., Park, J.B., et al.: Short carbon nanotubes produced by cryogenic crushing. Carbon 44, 2984 (2006)
97. Peng, J., Qu, X.X., Wei, G.S., Li, J.Q., Qiao, J.L.: The cutting of MWNTs using gamma radiation in the presence of dilute sulfuric acid. Carbon 42, 2741 (2004)
98. Tasis, D., Tagmatarchis, N., Bianco, A., Prato, M.: Chemistry of carbon nanotubes. Chem. Rev. 106, 1105 (2006)
99. Chen, J., Hamon, M.A., Hu, H., Chen, Y., Rao, A.M., Eklund, P.C., Haddon, R.C.: Solution properties of single-walled carbon nanotubes. Science 282, 95 (1998)
100. Riggs, J.E., Guo, Z., Carroll, D.L., Sun, Y.P.: Strong luminescence of solubilized carbon nanotubes. J. Am. Chem. Soc. 122, 5879 (2000)
101. Sridhar, V., Gupta, B.R., Tripathy, D.K.: Bound rubber in chlorobutyl compounds: influence of filler type and storage time. J. Appl. Polym. Sci. 102, 715 (2006)
102. Shanmugharaj, A.M., Bae, J.H., Lee, K.Y., Noh, W.H., Lee, S.H., Ryu, S.H.: Physical and chemical characteristics of multiwalled carbon nanotubes functionalized with aminosilane and its influence on the properties of natural rubber composites. Comp. Sci. Technol. 67, 1813 (2007)
103. Jitianu, A., Cacciguara, T., Berger, M.H., Benoit, R., Beguin, F., Bonnamy, S.: New carbon multiwall nanotubes-TiO2 nanocomposites obtained by the sol-gel method. J. NonCryst. Sol. 345, 596 (2004)
104. Fan, W., Gao, L., Sun, J.: Anatase TiO2-coated multi-wall carbon nanotubes with the vapour phase method. J. Am. Ceram. Soc. 89, 731 (2006)
105. Wang, Y., Wu, J., Wei, F.: A treatment method to give separated multi-walled carbon nanotubes with high purity, high crystallization and a large aspect ratio. Carbon 41, 2939 (2003)
106. Schaefer, D.W., Zhao, J., Brown, J.M., Anderson, D.P., Tomlin, D.W.: Morphology of dispersed carbon single-walled nanotubes. Chem. Phys. Lett. 375, 369 (2003)
107. Lu, K.L., Lago, R.M., Chen, Y.K., Green, M.L.H., Harris, P.J.F., Tsang, S.C.: Mechanical damage of carbon nanotubes by ultrasound. Carbon 34, 814 (1996)
108. Singh, B.P., Menchavez, R., Fuji, M., Takahashi, M.: Characterization of concentrated colloidal ceramics suspension: a new approach. J. Colloid Interface Sci. 300, 163 (2006)
109. Velsaco-Santos, C., Martinez-Hernandez, A.L., Fisher, F., Ruoff, R., Castano, V.M.: Dynamical mechanical and thermal analysis of carbon nanotube-methyl-ethyl methacrylate nanocomposites. J. Phys. D Appl. Phys. 36, 1423 (2003)
110. Cui, S., Canet, A., Derre, M., Couzi, M., Delhaes, P.: Characterization of multiwall carbon nanotubes and influence of surfactant in the nanocomposite processing. Carbon 41, 797 (2003)
111. Vaisman, L., Marom, G., Wagner, H.D.: Dispersions of surface-modified carbon nanotubes in water-soluble and water-insoluble polymers. Adv. Funct. Mater. 16, 357 (2006)
112. Graff, R.A., Swanson, J.P., Barone, P.W., Baik, S., Heller, D.A., Strano, M.S.: Achieving individual-nanotube dispersion at high loading in single-walled carbon nanotube composites. Adv. Mater. 17, 980 (2005)
113. Vaisman, L., Wagner, H.D., Marom, G.: The role of surfactants in dispersion of carbon nanotubes. Adv. Colloid Interface Sci. 128, 37 (2006)
114. Fukushima, H., Drzal, L.T., Rook, B.P., Rich, M.J.: Thermal conductivity of exfoliated graphite nanocomposites. J. Therm. Anal. Calor. 85, 235 (2006)
115. Xu, D., Sridhar, V., Pham, T.T., Kim, J.K.: Dispersion, mechanical and thermal properties of nano graphite platelets reinforced flouroelastomer composites. E-Polym 23, 1 (2008)
116. Xu, D., Sridhar, V., Mahapatra, S.P., Kim, J.K.: Dielectric properties of exfoliated nano graphite reinforced flouroelastomer composites. J. Appl. Polym. Sci. 111, 1358 (2009)
117. Pham, T.T., Sridhar, V., Kim, J.K.: Floroelastomer-MWCNT nanocomposites-1: dispersion, morphology, physico-mechanical and thermal properties. Polym. Comp. 30, 121 (2009)
118. Sridhar, V., Xu, D., Pham, T.T., Kim, J.K.: Dielectric and dynamic mechanical and relaxation behavior of nano graphite reinforced flouroelastomer composites. Polym. Comp. 30, 334 (2009)
119. Paglicawan, M.A., Balasubramanian, M., Kim, J.K.: Study on nanocomposite thermoplastic elastomer gels. Macromol. Symp. 249, 601 (2007)
120. Yasmin, A., Daniel, I.M.: Mechanical and thermal properties of graphite platelet/epoxy composites. Polymer 45, 8211 (2004)
121. Shaffer, M.S.P., Windle, A.H.: Fabrication and characterization of carbon nanotube/ poly(vinyl alcohol) composites. Adv. Mater. 11, 937 (1999)
122. Vu-Kanh, T., Fisa, B.: Fracture behavior of mica-reinforced polypropylene: effects of coupling agent, flake orientation, and degradation. Polym. Compos. 7, 216 (1986)
123. Zheng, W., Wong, S.C.: Electrical conductivity and dielectric properties of PMMA/ expanded graphite composites. Compos. Sci. Technol. 63, 225 (2003)
124. Roland, C.M., Bero, C.A.: Normal mode relaxation in linear and branched polyisoprene. Macromolecules 29, 7521 (1996)
125. Lewis, T.B., Nielsen, L.E.: Dynamic mechanical properties of particulate-filled composites. J. Appl. Polym. Sci. 14, 1449 (1970)
126. Eklind, H., Schantz, S., Maurer, F.H.J., Jannasch, P., Wesslen, B.: Characterization of the interphase in PPO/PMMA blends compatibilized by P(S-g-EO). Macromolecules 29, 984 (1996)
127. Shalaby, S.W.: In: Turi, E. (ed.) Thermal Characterization of Polymeric Materials. Academic Press, London (1981)
128. Jawad, S.A., Alnajjar, A.: Frequency and temperature dependence of ac electrical properties of graphitized carbon-black filled rubbers. Polym. Int. 44, 208 (1997)
129. Wang, Y.J., Pan, Y., Zhang, X.W., Tan, K.: Impedance spectra of carbon black filled highdensity polyethylene composites. J. Appl. Polym. Sci. 98, 1344 (2005)
130. Levya, M.E., Barra, G.M.O., Moreira, A.C.F., Soares, B.G., Khastgir, D.: Electric, dielectric, and dynamic mechanical behavior of carbon black/styrene-butadiene-styrene composites. J. Polym. Sci. B Polym. Phys. 41, 2983 (2003)
131. Levon, K., Margolina, A., Patashinsky, A.Z.: Multiple percolation in conducting polymer blends. Macromolecules 26, 4061 (1993)
132. Roberts, A.P., Knackstedt, M.A.: Structure-property correlations in model composite materials. Phys. Rev. E 54, 2313 (1996)
133. Curro, J.G., Mark, J.E.: A non-Gaussian theory of rubberlike elasticity based on rotational isomeric state simulations of network chain configurations. II. Bimodal poly(dimethylsiloxane) networks. J. Chem. Phys. 80, 4521 (1984)
134. Dutta, N.K., Tripathy, D.K.: Effects of types of fillers on the molecular relaxation characteristics, dynamic mechanical, and physical properties of rubber vulcanizates. J. Appl. Polym. Sci. 44, 1635 (1992)
135. Smit, P.P.A.: The glass transition in carbon black reinforced rubber. Rheol. Acta 5, 277 (1966)
136. Serizawa, H., Nakamura, T., Ito, M., Tanaka, K., Nomura, A.: Effects of oxidation of carbon black surface on the properties of carbon black- natural rubber systems. Polym. J. 14, 201 (1983)
137. Angell, C.A., Ngai, K.L., McKenna, G.B., McMillan, P.F., Martin, S.W.: Relaxation in glass forming liquids and amorphous solids. J. Appl. Phys. 88, 3113 (2000)
138. Toki, S., Hsiao, B.S.: Nature of strain-induced structures in natural and synthetic rubbers under stretching. Macromolecules 36, 5915 (2003)
139. Luch, D., Yeh, G.S.Y.: Morphology of strain-induced crystallization of natural rubber. I. Electron microscopy on uncrosslinked thin film. J. Appl. Phys. 43, 4326 (1972)
140. Shimizu, T., Tanaka, Y., Kutsumizu, S., Yano, S.: Ordered structure of poly(fluoroalkylfluoroacrylates). Macromolecules 26, 6694 (1993)
141. Keller, A.: Growth and perfection of crystals. In: Doremus, R.I., Roberts, B.W., Turnbull, D. (eds.) Proceedings of conference on crystal growth. New York, p. 499 (1958)
142. Conradt, R.N.J., Heise, B., Kilian, H.G.: Crystallization in stretched and unstretched rubber- thermodynamics and kinetics. Prog. Colloid Polym. Sci. 87, 84 (1992)
143. Bandyopadhyay, S., De, P.P., Tripathy, D.K., De, S.K.: Influence of surface oxidation of carbon black on its interaction with nitrile rubbers. Polymer 37, 353 (1996)
144. Sternstein, S.S., Zhu, A.I.: Reinforcement mechanism of nanofilled polymer melts as elucidated by nonlinear viscoelastic behaviour. Macromolecules 35, 7262 (2002)
145. Kavanagh, G.M., Ross-Murphy, S.B.: Rheological characterisation of polymer gels. Prog. Polym. Sci. 23, 533 (1998)
146. Mortensen, K., Theunissen, E., Kleppinger, R., Almdal, K., Reynaers, H.: Shear-induced morphologies of cubic ordered block copolymer micellar networks studied by in situ smallangle neutron scattering and rheology. Macromolecules 35, 7773 (2002)
147. Xu, Z., Zhao, C., Gu, A., Fang, Z.: Electric conductivity of PS/PA6/carbon black composites. J. Appl. Polym. Sci. 103 (2004)