Biobased polyurethanes and their composites: Present status and future perspective

Natural Fibers, Biopolymers, and Biocomposites

Volumn , Issue , 2005, Pages 775-805

  Dwan’Isa, Jean Pierre Latere ^a   Mohanty, Amar K ^b   Misra, Manjusri ^c   Drzal, Lawrence T ^c  

^a JANSSEN RESEARCH FOUNDATION   (Belgium)

^b MICHIGAN STATE UNIVERSITY   (United States)

^c Michigan State University   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 84874002475     PISSN: None     EISSN: None     Source Type: Book    
DOI: None     Document Type: Chapter

References (79)

1. Ullmann's Encyclopedia of Industrial Chemistry, Wiley-VCH Verlag GmbH & Co. KGaA (Electronic Encyclopedia), 7th Ed., 2005.
2. Szycher, M., in M. Szycher’s Handbook of Polyurethanes, CRC Press. Boca Raton, 1999.
3. Mohanty, A.K., Misra, M., and Drzal, L.T., J. Polym. Environ., 10, 19-26, 2002.
4. Gunstone, F.D., An Introduction to the Chemistry and Biochemistry of Fatty Acids and their Glycerides, Chapman & Hall, London, 1967.
5. Kirschenbauer, H.G., Fats and oils. An outline of their chemistry and technology, Reinhold Publishing Corporation, 1944.
6. Naughton, F.C., Duneczky, F., Swenson, C., Kroplinkski, C.R., and Cooperman, M.A., Kirk-Othmer Encyclopedia of Chemical Technology, Vol. 5, Wiley, New York, 1979.
7. Johnson, R.W. and Fritz, E., Fatty Acids in Industry-Process, Properties, Derivatives, Applications, Marcel Dekker, New York, 1983, p. 13.
8. Ghatge, D. and Phadke, V.B., Elastomers from castor oil, J. Appl. Polym. Sci., 11, 629-638, 1967.
9. Petrovic, Z.S. and Fajnik, D., Preparation and properties of castor oil-based polyurethanes, J. Appl. Polym. Sci., 29(4), 1031-1040, 1984.
10. Sperling, L.H., Carraher, C.E., Qureshi, S.P., Manson, J.A., and Barrett, L.W., in Biotechnology and Polymers, Gebelain, C.G., Ed., Plenum Press, New York, 1992.
11. Kim, S.C. and Sperling, L.H., IPN’s Around the World: Science and Engineering, Wiley, New York, 1997.
12. Oertel, G., Polyurethane Handbook, Chemistry-Raw Materials-Processing-Application-Properties, Hanser Publisher, 1985.
13. CasChem Technical Bulletin 100, Biothane Systems.
14. Wong, S.W., Wang, S.B., Graves, J.F., and Odocha, I., Applications of polyols derived from renewable resources in polyurethanes, Adv. Urethane Sci. Technol., 13, 73-111, 1996.
15. Frankel, E.N. and Thomas, F.L., Selective hydroformylation of polyunsaturated fats with a rhodium-triphenylphosphine catalyst, J. Am. Chem. Soc., 49, 10-14, 1972.
16. Frankel, E.N., U.S. Patent 3,787,459.
17. Frankel, E.N. and Pryde, E.H., Catalytic hydroformylation and hydrocarboxylation of unsaturated fatty compounds, J. Am. Oil Chem. Soc., 54, A873-A881, 1977.
18. Lyon, C.K., Garrett, V.H., and Frankel, E.N., Rigid urethane foams from hydroxymethylated castor oil, safflower oil, oleic safflower oil, and polyol esters of castor acids, J. Am. Oil Chem. Soc., 51, 331, 1974.
19. Guo, A., Demydov, D., Zhang, W., and Petrovic, Z.S., Polyols and polyurethanes from hydroformylation of soybean oil, J. Polym. Environ., 10, 49-52, 2002.
20. Biermann, U., Friedt, W., Lang, S., Luhs, W., Machmuller, G., Metzer, J.O., Rusch, M., Schafer, H.J., and Schneider, M.P., New syntheses with oils and fats as renewable raw materials for the chemical industry, Angew. Chem. Int. ed., 39, 2206-2224, 2000.
21. Sherringham, J.A., Clark, A.J., and Keene, B.R.T., New chemical feedstocks from unsaturated oils, Lipid Technol., 12, 129-132, 2000.
22. Dahlke, B., Hellbardt, S., Paetow, M., and Zech, W.H., Polyhydroxy fatty acids and their derivatives from plant oils, J. Am. Oil Chem. Soc., 72, 349-353, 1995.
23. Petrovic, Z., Guo, A., and Javni, I., U.S. Patent 6,107,433.
24. Guo, A., Javni, I., and Petrovic, Z., Rigid polyurethane foams based on soybean oil, J. Appl. Polym. Sci., 77, 467-473, 2000.
25. Javni, I., Petrovic, Z.S., and Guo, A., Fuller, R., Thermal stability of polyurethanes based on vegetable oils, J. Appl. Polym. Sci., 77, 1723-1734, 2000.
26. Guo, A., Cho, Y.-J., and Petrovic, Z.S., Structure and properties of halogenated and nonhalogenated soy-based polyols, J. Polym. Sci., 38, 3900-3910, 2000.
27. Petrovic, Z.S., Guo, A., and Zhang, W., Structure and properties of polyurethanes based on halogenated and nonhalogenated soy-polyols, J. Polym. Sci., 38, 4062-4069, 2000.
28. Chian, K.S. and Gan, L.H., Development of a rigid polyurethane foam from palm oil, J. Appl. Polym. Sci., 68, 509-515, 1998.
29. Badri, K., Ahmad, S.H., and Zakaria, S., Production of a high-functionality RBD palm kernel oil-based polyester polyol, J. Appl. Polym. Sci., 81, 384-389, 2001.
30. Sonntag, N.O.V., Glycerolysis of fats and methyl esters-status, review and critique, J. Am. Chem. Soc., 59, 795, 1982.
31. Kurth, T.M., Kurth, R.A., Turner, R.B., and Les P. Kreifels, U.S. Patent 0,119,321.
32. Harris, R.R. and Pollack, W.J., U.S. Patent 4, 116,902.
33. Bentley, J., in The Use of Oils and Fats in Paints and Surface Coatings in Lipid Technologies and Applications, Marcel Dekker, New York, 1997.
34. Lin, K.F., in Paints, Varnishes, and Related Products in Bailey’s Industrial Oil and Fat Products, John Wiley, New York, Vol. 5, 1996.
35. Stoye, D., Funke, W., Hoppe, L., Hasselkus, J., Curtis, L.G., Hoehne, K., Zech, H.-J., Heiling P. et al., Ullmann’s Enclycopedia of Industrial Chemistry, Wiley-VCH Verlag GmbH, Weinhem, Germany, 2002.
36. Chornet, E. and Overend, R.P., Proceedings of the International Conference on Thermomechanical Biomass Conversion, Estes Park, Colorado, Oct. 18-22, 1982, p. 87.
37. Bestue-Labazuy, C., Soyer, N., Bruneau, C., and Brault, A., Wood liquefaction with hydrogen or helium in the presence of iron additives, Can. J. Chem. Eng., 63, 634-638, 1985.
38. Figueroa, C., Schaleger, L.L., and Davis, H.G., Proceedings of the 6th Annual Conference on Energy from Biomass Wastes, Lake Buena Vista, FL, 1982, pp 1097-1112.
39. Bouvier, J.M., Gelus, M., and Maugendre, S., Wood liquefaction-an overview, Appl. Energ., 30, 85-98, 1988.
40. Kresta, J.E., Polymer Science and Technology, Vol. 18, Plenum Press, New York, 1982.
41. Hesse, W. and Jung, A., Eur. Pat. Appl. EP43097, 1980.
42. Ono, H., Yamada, T., Hatano, Y., and Motohashi, K., Adhesives from waste paper by means of phenolation, J. Adhes., 59, 135-145, 1996.
43. Kurimoto, Y., Shirakawa, K., Yoshioka, M., and Shirishi, N., Proc. Symp. Chem. Modifi. of Lignocell., New Zealand, Bull., 176, 192, 1992.
44. Kurimoto, Y., Takeda, M., Koizumi, A., Yamauchi, S., Doi, S., and Tamura, Y., Mechanical properties of polyurethane films prepared from liquefied wood with polymeric MDI, Bioresour. Technol., 74, 151-157, 2000.
45. Kurimoto, Y., Takeda, M., Doi, S., Tamura, Y., and Ono, H., Network structures and thermal properties of polyurethane films prepared from liquefied wood, Bioresour. Technol., 77, 33-40, 2001.
46. Madas, D. and Shiraishi, N., Liquefaction of wood in the presence of polyol using NaOH as a catalyst and its application to polyurethane foams, Int. J. Polym. Mater., 33, 61-71, 1996.
47. Yao, Y., Yoshioka, M., and Shiraishi, N., Rigid polyurethane foams from combined liquefaction mixtures of wood and starch, Mokuzai Gakkaishi, 41, 659-668, 1995.
48. Uehori, Y., Yoshioka, M., and Shiraishi, N., Abstracts of 42th Annual Meeting of Japan Wood Research Society, Nagoya, 1992, p. 295.
49. Kurimoto, Y., Shirakawa, K., Yoshioka, M., and Shiraishi, N., Liquefaction of untreated wood with polyhydric alcohols and its application to polyurethane foams, FRI (NZ) Bull., 176, 163, 1992.
50. Lin, L., Yoshioka, M., Yao, Y., and Shiraishi, N., Physical properties of moldings from liquefied wood resins, J. Appl. Polym. Sci., 55, 1563, 1995.
51. Yao, Y., Yoshioka, M., and Shiraishi, N., Water-absorbing polyurethane foams from liquefied starch, J. Appl. Polym. Sci., 60, 1939-1949, 1996.
52. Lee, S-H., Yoshioka, M., and Shiraishi, N., Liquefaction of corn bran (CB) in the presence of alcohols and preparation of polyurethane foam from its liquefied polyol, J. Appl. Polym. Sci., 78, 319-325, 2000.
53. Lee, S-H., Teramoto, Y., and Shiraishi, N., Acid-catalyzed liquefaction of waste paper in the presence of phenol and its application to novolak-type phenolic resin, J. Appl. Polym. Sci., 83, 1482-1489, 2002.
54. Adler, E., Lignin chemistry-past, present and future, Wood Sci. Technol., 11, 169, 1977.
55. nd ed., Vol. 8, Wiley, New york, 1987, p. 795.
56. American Forest and Paper Association, US. Pulp and Paper Industry’s Energy Use, Washington, DC, 1984.
57. Saraf, V.P. and Glasser, W.G., Engineering plastics from lignin. III. Structure property relationships in solution cast polyurethane films, J. Appl. Polym. Sci., 29, 1831-1841, 1984.
58. Saraf, V.P., Glasser, W.G., Wilkes, G.L., and McGraph, J.E., Engineering plastics from lignin. VI. Structure-property relationships of PEG-containing polyurethane networks, J. Appl. Polym. Sci., 30, 2207-2224, 1985.
59. Yoshida, H., Morck, R., Kringstad, K.P., and Hatakeyama, H., Kraft lignin in polyurethanes. I. Mechanical properties of polyurethanes from a kraft ligninpolyether triol-polymeric MDI system, J. Appl. Polym. Sci., 34, 1187, 1987.
60. Yoshida, H., Morck, R., Kringstad, K.P., and Hatakeyama, H., Kraft lignin in polyurethanes. II. Effects of the molecular weight of kraft lignin on the properties of polyurethanes from a kraft lignin-polyether triol-polymeric MDI system, J. Appl. Polym. Sci., 40, 1819-1832, 1990.
61. Hatakeyama, H., Sirose, S., Nakamura, K., and Hatakeyama, T., Cellulosics: Chemical, Biomedical and Material Aspects, Kennedy, J.F., Phillips, G.O., and Williams, P.A., Eds., Ellis Horwood, New York, 1993, pp 523-536.
62. Hatakeyama, H., in Chemical Modification, Properties, and Usage of Lignin, Thomas Q. Hu, Ed., Kluwer Academic/Plenum Publishers, Dordrecht, 2002.
63. Blazdell, P., Inter. Science Rev., 25, 220-226, 2000.
64. Anand, L.C., CNSL based polymers and their applications, Paint India, 28, 13-33, 1978.
65. Bhunia, H.P., Jana, R.N., Basak, A., Lenka, S., and Nando, G.B., Synthesis of polyurethane from cashew nut shell liquid (CNSL), a renewable resource, J. Polym. Sci. Chem., 36, 391-400, 1998.
66. Minh Tan, T.T., Cardanol-glycols and cardanol-glycol-based polyurethane films, J. Appl. Polym. Sci., 65, 507-510, 1997.
67. Ghatge, N.D., Gujar, K.B., and Mahajan, S.S., Synthesis of polyurethane rigid foams from cardanol, Ind. J. Technol., 23, 195-197, 1985.
68. Evtiouguina, M., Barros, A.M., Cruz-Pinto, J.J., Neto, C.P., Belgacem, N., Pavier, C., and Gandini, A., The propoxylation of cork residues: preliminary results, Bioresour. Technol., 73, 187-189, 2000.
69. Evtiouguina, M., Barros, A.M., Cruz-Pinto, J.J., Neto, C.P., Belgacem, N., and Gandini, A., Oxypropylation of cork and the use of the ensuing polyols in polyurethane formulations, Biomacromolecules, 3, 57-62, 2002.
70. Cordeiro, N., Belgacem, M.N., Silvestre, A.J.D., Neto, C.P., and Gandini, A., Cork suberin as a new source of chemicals. 1. Isolation and chemical characterization of its composition, Int. J. Biol. Macromol., 22, 71-78, 1998.
71. Cordeiro, N., Belgacem, M.N., Gandini, A., and Pascoal Neto, C., Urethanes and polyurethanes from suberin: 1. Kinetic study, Ind. Crops Prod., 6, 163-167, 1997.
72. Cordeiro, N., Belgacem, M.N., Gandini, A., and Pascoal Neto, C., Urethanes and polyurethanes from suberin 2. Synthesis and characterization, Ind. Crops Prod., 10, 1-10, 1999.
73. www.huntsman.com
74. Dahlke, B., Poltrock, R., Larbig, H., and Scherzer, H.D., Natural fiber reinforced foams based on renewable resources for automotive interior applications, J. Cell. Plast., 34, 361-379, 1998.
75. Hull, D. and Clyne, T.W., in An Introduction to Composite Materials, 2nd ed., Cambridge University Press, London, 1996.
76. Rials, T.G. and Wolcott, M.P., Morphology-property relationships in wood-fiberbased polyurethanes, J. Mater. Sci. Lett., 17, 317-319, 1998.
77. Agrawal, R.K. and Drzal, L.T., Adhesion mechanisms of polyurethanes to glass surfaces. I. Structure-property relationships in polyurethanes and their effects on adhesion to glass, J. Adhes., 54, 79-102, 1995.
78. Agrawal, R.K. and Drzal, L.T., Adhesion mechanisms of polyurethanes to glass surfaces. III. Investigation of possible physicochemical interactions at the interphase, J. Adhes., 55, 221-243, 1996.
79. www.pu.bayer.com