Electrical power equipment maintenance and testing, second edition

Electrical Power Equipment Maintenance and Testing, Second Edition

Volumn , Issue , 2008, Pages 1-963

  Gill, Paul ^a  

^a U S NUCLEAR REGULATORY COMMISSION   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 84873949110     PISSN: None     EISSN: None     Source Type: Book    
DOI: None     Document Type: Book

References (374)

1. Andreas, J. C., Energy-Efficient Electric Motors: Selection and Application, Marcel Dekker, Inc., New York, 1992.
2. Bartley, W. H., Analysis of Transformer Failures: Part 2-Causes, Prevention and Maximum Service Life, International Association of Engineering Insurers 36th Annual Conference, Stockholm, Sweden, 2003.
3. de Siqueira, I. P., Reliability-centered maintenance of oil immersed transformers: A work group approach from several companies, Doble Client Conference, Boston, MA, 2008.
4. Edison Electric Institute, Report on equipment availability for 10 year period, 1965-74, EEI Publication No. 75-50, November 1975 (Prime Mover Generation Equipment).
5. Edison Electric Institute, Report on excitation system troubles, 1975, EEI Publication No. 76-78, December 1976 (later data have also been published).
6. Edison Electric Institute, Report on generator troubles, 1975, EEI Publication No. 76082, December 1976 (later data have also been published).
7. Edison Electric Institute, Report on metalclad switchgear troubles, 1975, EEI Publication No. 76-82, December 1976 (later data have also been published).
8. Edison Electric Institute, Report on motor troubles, 1975, EEI Publication No. 76-79, December 1976.
9. Edison Electric Institute, Report on power circuit troubles, 1975, EEI Publication No. 76-81, December 1976.
10. Edison Electric Institute, Report on power transformer troubles, 1975, EEI Publication No. 76-80, December 1976.
11. Hillmer, T. and Brandes, H., New generation of a class 180 (H) electrical insulation system for high voltage machines, Doble Client Conference, Boston, MA, 2008.
12. IEEE Committee Report, Report on reliability survey of industrial plants: Parts I, II, and III, IEEE Transaction on Industry Applications, Vol. IA-10, No. 2, July/August 1974, pp. 213-252; Parts IV, V and VI, Vol. IA-10, No. 4, July/August 1974, pp. 456-476.
13. IEEE Committee Report, Report on reliability survey of industrial plants: Parts I-VI, IEEE Transactions on Industry Applications, March/April 1974, pp. 213-252; July/August 1974, pp. 456-476; September/October 1974, p. 681 (see Annex A and Annex B).
14. IEEE Committee Report, Report of switchgear bus reliability survey of industrial plants and commercial buildings, IEEE Transactions on Industry Applications, March/April 1979, pp. 141-147 (see Annex E).
15. IEEE Committee Report, Report of generator reliability survey of industrial plants and commercial buildings, IEEE-ICPS Technical Conference Record, CH1543-8-1A, May 1980, pp. 40-44.
16. IEEE Committee Report, Report of transformer reliability survey-Industrial plants and commercial buildings, IEEE Transactions on Industry Applications, 1983, pp. 858-866 (see Annex G).
17. IEEE Std 500-1984 (Reaff 1991), IEEE Guide to the Collection and Presentation of Electrical, Electronic, Sensing Component, and Mechanical Equipment Reliability Data for Nuclear Power Generating Stations 2, 3, IEEE Std 493-2007
18. IEEE Std 120-1989, IEEE Master Test Guide for Electrical Measurements in Power Circuits.
19. IEEE Std 902-1998, IEEE Guide for Maintenance, Operation, and Safety of Industrial and Commercial Power Systems.
20. IEEE Std 1-2000, IEEE Recommended Practice-General Principles for Temperature Limits in the Rating of Electrical Equipment and for the Evaluation of Electrical Insulation.
21. IEEE Std 493-2007, IEEE Recommended Practice for the Design of Reliable Industrial and Commercial Power Systems.
22. Mayoux, C., On the degradation of industrial materials withstanding electrical stress, IEEE Conference on Electrical Insulation and Dielectric Phenomena 2000, Victoria, BC.
23. McWilliams, D. W., Patton, A. D., and Heising, C. R., Reliability of electrical equipment in industrial plants-Comparison of results from 1959 survey and 1971 survey, IEEE-ICPS Technical Conference Record, 74CH0855-71A, Denver, CO, June 2-6, 1974, pp. 105-112.
24. Megger Inc., “A Stitch in Time…" The Complete Guide to Electrical Testing, 21-P8b-1992, Megger Inc., Valley Forge, PA.
25. Moubray, J., ATA MSG-3, Operator/manufacturer scheduled maintenance development, Reliability-Centered Maintenance, Industrial Press, Inc., New York, 2003.
26. Neitzel, D. K., Circuit Breaker Maintenance, Medium-Voltage Course Textbook, Chapter 1, AVO Training Institute, Inc., Dallas, TX, revision 2006, p. 1-10.
27. Neitzel, D. K., Circuit Breaker Maintenance, Medium-Voltage Course Textbook, Chapter 4, AVO Training Institute, Inc., Dallas, TX, revision 2006, p. 4-18.
28. Neitzel, D., Establishing an electrical safety program, NETA Conference Papers, 2006.
29. Neitzel, D. K., Protective Relay Maintenance, Basic Course Textbook, Module 3, AVO Training Institute, Inc., Dallas, TX, revision 2006, p. 5-24.
30. Neitzel, D. K., Circuit Breaker Maintenance, Low-Voltage Course Textbook, Module 2, AVO Training Institute, Inc., Dallas, TX, revision 2007, p. 34.
31. Neitzel, D. K., Principle Components of a Molded-Case Circuit Breaker, AVO Training Institute, Inc., Dallas, TX, revision 2007, p. 14.
32. Neitzel, D. K., Various Electrical Safety Course Textbooks, NEC 110.16 Required Label, AVO Training Institute, Inc., Dallas, TX, revision 2007.
33. Neitzel, D. K., Various Electrical Safety Course Textbooks, Recommended Label for Arc-Flash Hazard, AVO Training Institute, Inc., Dallas, TX, revision 2007.
34. A Guide to the Reliability-Centered Maintenance (RCM) Standard, (SAE JA1012), Society of Automotive Engineers (SAE), January 2002.
35. NUREG/CR-6819, Common-Cause Failure Event Insights-Circuit Breakers, Vol. 4, Idaho National Engineering and Environmental Laboratory, Idaho Falls, ID, May 2003.
36. O’Donnell, P., Report of large motor reliability survey of industrial plants and commercial installations, IEEE Transactions on Industry Applications, Parts 1 and 2, July/August 1985, pp. 853-872; Part 3, January/February 1987, pp. 153-158 (see Annex H).
37. O’Donnell, P., Survey of lower voltage breakers as found during maintenance, IEEE Industrial & Commercial Power Systems Technical Conference, May 6-9, 1996, New Orleans, LA.
38. Patton, A. D., Determination and analysis of data for reliability studies, IEEE Transactions on Power Apparatus and Systems, Vol. PAS-87, January 1968, pp. 84-100.
39. PowerDB Inc., Instructional Manual for PowerDB Software, PowerDB Inc., College Station, TX, 2008.
40. ReliaSoft Corporation, Basic steps of applying reliability centered maintenance (RCM)-Part II, Reliability HotWire, ReliaSoft Corporation, Issue 73, 2007.
41. Smith, A. and Glenn R., RCM-Gateway to World Class Maintenance, Elsevier, Burlington, MA, 2004.
42. St. Germain, E., and Pride, A., NASA Reliability Maintenance Guide for Facilities and Collateral Equipment, 1996. UL 1446-2007, Standard for Systems of Insulating Materials.
43. Bishop, T., Insulation resistance testing: How many megohms does it take to start a motor? NETA World, Spring 2008.
44. El-Hawary, M. E. (Series Editor), Electrical Insulation for Rotating Machines, Design, Evaluation Aging Testing and Repair, IEEE Press Series on Power Engineering, John Wiley & Sons, Inc., Hoboken, NJ, 2004.
45. Gregorec, J., The basics of insulation testing, NETA World, Fall 2006.
46. IEEE Std 62-1995, IEEE Guide for Diagnostic Field Testing of Electric Power Apparatus, Part 1: Oil Filled Power Transformers, Regulators, and Reactors.
47. IEEE Std 4-1995, IEEE Standard Techniques for High-voltage Testing.
48. IEEE Std 902-1998 (Yellow Book), IEEE Guide for Maintenance, Operation, and Safety of Industrial and Commercial Power Systems.
49. IEEE Std 400-2001, Guide for Field Testing and Evaluation of the Insulation of Shielded Power Cable Systems.
50. IEEE Std 400-2001, IEEE Guide for Field Testing and Evaluation of the Insulation of Shielded Power Cable Systems.
51. IEEE Std 4a-2001, Amendment to IEEE Standard Techniques for High-Voltage Testing.
52. IEEE Std 95-2002, IEEE Recommended Practice for Insulation Testing of AC Electric Machinery (2300 V and above) with High Direct Voltage.
53. IEEE Std 522-2004, IEEE Guide for Testing Turn Insulation of Form-Wound Stator Coils for Alternating-Current Electric Machines.
54. IEEE Std 62.2-2004, IEEE Guide for Diagnostic Field Testing of Electric Power Apparatus.
55. IEEE Std 112-2004, IEEE Standard Test Procedure for Polyphase Induction Motors and Generators.
56. IEEE Std 1-2005, IEEE Recommended Practice-General Principles for Temperature Limits in the Rating of Electrical Equipment and for the Evaluation of Electrical Insulation.
57. IEEE Std 400.1-2007, IEEE Guide for Field Testing of Laminated Dielectric, Shielded Power Cable Systems Rated 5 kV and above with High Direct Current Voltage.
58. Jowett, J., Insulation testing as an electrical maintenance tool, NETA World, Summer 2004.
59. Megger Inc., “A Stitch in Time…" The Complete Guide to Electrical Testing, 21-P8b-1992, Megger Inc., Valley Forge, PA.
60. Megger Inc., A Guide to Diagnostic Insulation Testing above 1 kV, MEG-562/3M/5.2007, Megger Inc., Valley Forge, PA.
61. Megger Inc., Instructional Manual for S1-552 5 kV Digital Insulation Resistance Tester, S1-552_UG_en_V03 0806, Megger Inc., Dover, U.K.
62. NETA Maintenance Testing Specifications for Electrical Power Distribution Equipment and Systems (NETA MTS-2005), International Electrical Testing Association, Portage, MI, Table 100-1, 2005.
63. Reynolds, A. O., The Lowdown on High-Voltage DC Testing, 22-P1-1988, Biddle Instruments, Blue Bell, PA, 1988.
64. Westinghouse Electric Corporation, Westinghouse Electrical Maintenance Hints, Westinghouse Electric Corporation Printing Division, Trafford, PA, 1984.
65. Cotter, J. and Kennedy, M., Factory verses Field Testing of C2 for HSP Bushings, Doble Client Conference, Boston, MA, 2008.
66. Doble Engineering Co., Power-Factor Test Data Reference Book, Doble Engineering Co., Watertown, MA, 1985.
67. Gregorec, J., The basics of insulation testing, NETA World, Fall 2006.
68. Hill, K., Basic power factor testing, NETA Conference Papers, 2004.
69. IEEE Std 4-1995, IEEE Standard Techniques for High-Voltage Testing (revision of IEEE Std 4-1 978).
70. IEEE Std 62-1995, IEEE Guide for Diagnostic Field Testing of Electric Power Apparatus, Part 1: Oil Filled Power Transformers, Regulators, and Reactors.
71. IEEE Std 286-2000, IEEE Recommended Practice for Measurement of Power Factor Tip-Up of Electric Machinery Stator Coil Insulation.
72. IEEE Std 576-2000, IEEE Recommended Practice for Installation, Termination, and Testing of Insulation.
73. IEEE Std 400-2001, IEEE Guide for Field Testing and Evaluation of the Insulation of Shielded Power Cable Systems.
74. IEEE Std 4a-2001, Amendment to IEEE Standard Techniques for High-Voltage Testing.
75. IEEE Std 522-2004, IEEE Guide for Testing Turn Insulation of Form-Wound Stator Coils for Alternating-Current Electric Machines.
76. IEEE Std 62.2-2004, IEEE Guide for Diagnostic Field Testing of Electric Power Apparatus.
77. IEEE Std 400.2-2004, IEEE Guide for Field Testing of Shielded Power Cable Systems Using Very Low Frequency (VLF).
78. IEEE Std 400.3-2006, IEEE Guide for Partial Discharge Testing of Shielded Power Cable Systems in a Field Environment.
79. Jesing, J., C1 and C2 testing sensitivity on a current transformer, CLP Power India GPEC Paguthan CCPP, Doble Client Conference, Boston, MA, 2008.
80. Megger Inc., Instructional Manual for Delta-3000 10 kV Automated Insulation Test Set, AVTM673001, Megger Inc., Valley Forge, PA.
81. Megger Inc., Instructional Manual for Capacitance and Dissipation Factor Bridge Catalog No. 810130, AVTM810130, Megger Inc., Valley Forge, PA, 2002.
82. Melo, M. C. and Brazil, F., Analysis and comparison of failure modes of OIP and RIP bushings, Doble Client Conference, Boston, MA, 2008.
83. Rowan, S., Non-invasive on-line diagnostics for electrical systems, Mining Technology Magazine, July 1988.
84. ASTM D117-2002, Standard Guide for Sampling, Test Methods, and Specifications for Electrical Insulating Oils of Petroleum Origin.
85. ASTM D88-2007, Standard Test Method for Saybolt Viscosity.
86. Claiborne, C. C., Oommen, T. V., Le, H. D., Walsh, E. J., and Baker, J. P., Enhanced cellulosic insulation life evaluation in a high oleic vegetable oil dielectric fluid, Paper 3C, Doble Conference, April 2002.
87. FCC Rules, Code of Federal Regulations Title 40 Part 761.1 (40CFR761.1), Protection of Environment-Polychlorinated Biphenyls (PCBs) Manufacturing, Processing, Distribution in Commerce, and Use Prohibitions-Applicability, 1995.
88. Garnett, J. and Sweetser, C., In-service assessment and teardown of an ABB PME362-50-30 SF6 filled dead tank circuit breaker, Doble Client Conference, Boston, MA, 2008.
89. Hibi, K., SF6 Gas management, Doble Client Conference, Boston, MA, 2008.
90. IEC 61203:1992, Synthetic Organic Esters for Electrical Purposes-Guide for Maintenance of Transformer Esters in Equipment.
91. IEEE Std C57.104-1991, IEEE Guide for the Detection and Determination of Generated Gases in Oil-Immersed Transformers and Their Relation to the Serviceability of the Equipment.
92. IEEE Std C57.111-2003, IEEE Guide for Acceptance of Silicone Insulating Fluid and its Maintenance in Transformers.
93. IEEE Std C57.146-2005, IEEE Guide for the Interpretation of Gases Generated in Silicone-Immersed Transformers.
94. IEEE Std C57.106-2006, IEEE Guide for Acceptance and Maintenance of Insulating Oil in Equipment.
95. IEEE Std C57.147-2008, IEEE Guide for Acceptance and Maintenance of Natural Ester Fluids in Transformers.
96. Jakob, K. and Jakob, F., Recent applications of DGA, NETA Conference Papers, 2006.
97. Lewand, L., Gassing characteristics of transformer oil under thermal stress, NETA World, Fall 2005.
98. McShane, C. P., New safety dielectric coolants for distribution and power transformers, IEEE Industry Applications Magazine, Vol. 6, No. 3, pp. 24-32, May/June 2000.
99. McShane, C. P., Rapp, K. J., Corkran, J. L., Gauger, G. A., and Luksich, J., Aging of paper insulation in natural ester dielectric fluid, IEEE/PES Transmission and Distribution Conference and Exposition, October 28-November 2, 2001.
100. McShane, C. P., Luksich, J., and Rapp, K. J., Retrofilling aging transformer with natural ester based dielectric coolant for safety and life extension, Proceedings of the IEEE-IAS/PCA Cement Industry Technical Conference, Dallas, TX, May 2003.
101. Megger Inc., Instructional Manual for OTS60SX Semi Automatic Oil Test Set, 6172-120 V12, Megger Inc., Dover, U.K.
102. Occupational Safety and Health Administration (OSHA), 29 CFR, Part 1910, Subpart Z, 1910.1000, Table Z-2.
103. Oommen, T. V., Claiborne, C. C., Walsh, E. J., and Baker, J. P., A new vegetable oil based transformer fluid: Development and verification, IEEE Conference on Electrical Insulation and Dielectric Phenomena, Vancouver, BC, Canada, October 2000, pp. 308-312.
104. Platts, D., Investigation of transformer hydrogen gassing, PPL electric utilities, Doble Client Conference, Boston, MA, 2008.
105. U.S. Environmental Protection Agency, Environmental Technologies Verification (ETV) Reports, EPA 600/R-02/042 and EPA 600/R-02/043, Office of Research and Development, National Center for Environmental Research, Washington, DC.
106. U.S. Environmental Protection Agency, Environmental Technology Verification, Joint Verification Statement for Vegetable Oil-Based Insulation Dielectric Fluid, Statement VS-R-02-02, June 2002, and VSR-02-03, June 2002.
107. U.S. Environmental Protection Agency, Test Method OPPTS 835.3110, Office of Prevention, Pesticides, and Toxic Substances Test Guidelines, Washington, DC, September 1995.
108. VDE 0370-1978, Insulating Oils in Service in Transformers and Switchgear.
109. Babcock, R. O., Application Guide for Power Factor Testing of Bushings, Megger Inc., Dallas, TX, 2003.
110. Babcock, R. O., Application Guide for Power Factor Testing of Power and Distribution Transformers, Megger Inc., Dallas, TX, 2003.
111. Bartley, W., Analysis of transformer failures, International Associations of Engineering Insurers Association 36th Annual Conference, Stockholm, 2003.
112. Bartley, W., Investigating transformer failures, Weidmann-ACTI 5th Annual Technical Conference, Hartford Steam Boiler Inspection & Insurance Company, November 2006.
113. Britton, J. A., Frequency response analysis of power transformers: Practical aspects of FRA testing and interpretation, NETA 2005 Annual Technical Conference, New Orleans, LA.
114. Coffeen, L. (NEETRAC), Cantrelle, D. (George Power Co.), and Mongo, J. (Florida Power and Light), Online Monitor Tracks Transformer Health, Transmission and Distribution World, October 1, 2007.
115. Hamaker, C., A blueprint for transformer maintenance, Public Utilities Fortnightly, July 2006.
116. IEEE C57.125-1991, IEEE Guide for Failure Investigation, Documentation and Analysis for Power Transformers and Shunt Reactors.
117. IEEE C57.19.01-2000, IEEE Standard Performance Characteristics and Dimensions for Outdoor Apparatus Bushings.
118. IEEE C57.91-1995, IEEE Guide for Loading Mineral-Oil-Immersed Transformers.
119. IEEE PC 57.119-2001, Recommended Practice for Performing Temperature Rise Tests on Oil Immersed Power Transformers at Loads beyond Nameplate Ratings.
120. IEEE Std 259-1999, IEEE Standard Test Procedure for Evaluation of Systems of Insulation for Dry-Type Specialty and General-Purpose Transformers.
121. IEEE Std C57.113-1991, IEEE Guide for Partial Discharge Measurement in Liquid-Filled Power Transformers and Shunt Reactors.
122. IEEE Std C57.12.00-2000, IEEE Standard General Requirements for Liquid-Immersed Distribution, Power, and Regulating Transformers.
123. IEEE Std C57.12.10-1997, Product Standard for Power Transformers.
124. IEEE Std C57.12.90-1999, IEEE Standard Test Code for Liquid-Immersed Distribution, Power, and Regulating Transformers.
125. IEEE Std C57.93-2007, IEEE Guide for Installation and Maintenance of Liquid-Immersed Power Transformers.
126. IEEE Std C57.98-1993 (Reaff 1999), IEEE Guide for Transformer Impulse Tests.
127. James, R. and Bartley, W., Transformer asset management, Weidmann-ACTI 2nd Annual Technical Conference, New Diagnostics for Better Asset Management, November 2003.
128. Kennedy, M., Field experiences with SFRA, DOBLE Client Conference, Boston, MA, 2008.
129. Mandeville, J., SFRA-AEP’s Prospective, Doble Client Conference, Boston, MA, 2008.
130. Megger Inc., Instructional Manual for Capacitance and Dissipation Factor Bridge Catalog No. 810130, AVTM810130, Megger Inc., Valley Forge, PA.
131. Megger Inc., Instructional Manual for Delta-3000 10kV Automated Insulation Test Set, AVTM673001, Megger Inc., Valley Forge, PA.
132. Megger Inc., Instructional Manual for S1-552 5kV Digital Insulation Resistance Tester, S1-552_UG_en_V03 0806, Megger Inc., Dover, U.K.
133. Megger Inc., Instructional Manual for Transformer Ohmmeter Catalog No. 830280, AVTM830280, Megger Inc., Valley Forge, PA.
134. Megger Inc., Instructional Manual for TTR Hand Crank Transformer Turn Ratio Test Set, AVTM 55-JD, Megger Inc., Valley Forge, PA.
135. Megger Inc., Instructional Manual for TTR25 Handheld Transformer Turn Ratio Test Set, AVTMTTR25, Megger Inc., Valley Forge, PA.
136. Megger Inc., Instructional Manual for TTR310 Three-Phase Transformer Turn Ratio Test Set, AVTMTTR310, Megger Inc., Valley Forge, PA.
137. Meyers, S. D., Kelly, J. J., and Parrish, R. H., A Guide to Transformer Maintenance, Transformer Maintenance Institute, Akron, OH, 1981.
138. NEMA standard publication number TR1-1993 (R2000), Transformers, Regulators, and Reactors, NEMA, Rosslyn, VA.
139. NETA Maintenance Testing Specification for Electrical Power Distribution Equipment and Systems (NETA MTS-2005), International Electrical Testing Association, 3050 Old Center Ave, Portage, MI, Table 100-5, 2005.
140. Prout, P. and Simonelli, R., Assessment of insulation dryness using dew point measurements of transformers below freezing, DOBLE Client Conference, Boston, MA, 2008.
141. Rojas, A., The role of test voltage and current levels in transformer condition assessment-Is there a better way? NETA Conference Papers, 2006.
142. Sánchez, S., Pérez, C., and Avalos, A., Frequency response analysis for fault detection in power transformers, Doble Client Conference, Boston, MA, 2008.
143. Stephens, R., Hill, K., and Stelmach, D., High voltage transformer tests uncover manufacturing defect not detected in the factory, DOBLE Client Conference, Boston, MA, 2008.
144. Theyeri, M., Risk management associated with power transformers, DOBLE Client Conference, Boston, MA, 2008.
145. Abdolall, K., Halldorson, G. L., and Green, D., Condition assessment and failure modes of solid dielectric cables in perspective, IEEE Transaction on Power Delivery, Vol. 17, No. 1, January 2002.
146. Ahmed, N. and Srinivas, N., Partial discharge measurements in distribution class extruded cables, IEEE T&D Conference, New Orleans, 1999, pp. 46-51.
147. Ahmed, N. and Srinivas, N., Online Versus Offline Partial Discharge Testing in Power Cables, DTE Energy Technologies Inc., 2001.
148. Babcock, R. O., Application Guide for Power Factor Testing of Cables and Potheads, 2003, Megger Inc., Dallas, TX.
149. Boone, W., Reliability improvement of cable circuits by condition-based maintenance, NETA Conference Papers, 2004.
150. Chan, J.C., Duffy, P., Hiivala, L.J., and Wasik, J. Partial discharge-Part VIII: PD Testing of solid dielectric cables, Electrical Insulation Magazine, September/October 1991, pp. 744-760.
151. Eynon, R., Inspections of medium-voltage power cables, NETA Conference Papers, 2004.
152. GE Wire and Cable Hand Book, Wire and Cable Products Department, Bridgeport, CT, 1973.
153. Gulski, E., Smith, J. J., Seitz, P. N., and Smit, J. C. PD Measurements on-site using oscillating wave test system, Conference Record of the 1998 International Symposium of Electrical Insulation, Virginia, June 7-10, 1998, pp. 420-423.
154. Hicks, S., On-line partial-discharge testing of medium-voltage cables, NETA Conference Papers, 2004.
155. IEEE Std 400-2001, IEEE Guide for Field Testing and Evaluation of the Insulation of Shielded Power Cable Systems.
156. IEEE Std 400.2-2004, IEEE Guide for Field Testing of Shielded Power Cable Systems Using Very Low Frequency (VLF).
157. IEEE Std 400.3-2006, IEEE Guide for Partial Discharge Testing of Shielded Power Cable Systems in a Field Environment.
158. IEEE Std 400.1-2007, IEEE Guide for Field Testing of Laminated Dielectric, Shielded Power Cable Systems Rated 5 kV and above with High Direct Current Voltage.
159. Lanz, B., Cable testing options compared, Application Note, 2004.
160. Megger Inc., Instructional Manual for Portable Fault Locator PFL40A, AVTMPFL40A-EN, Megger Inc., Valley Forge, PA.
161. Megger Inc., Fault Finding Solutions, MEG-231/MIL/3M/11.2003, Megger Inc., Valley Forge, PA.
162. Moore, G. F. (Ed.), Electrical Cables Handbook/BICC Cables, 3rd edn., Blackwell Science, Oxford; Malden, MA, 1997.
163. Morshuis, P., Assessment of dielectric degradation of ultrawide band PD detection, IEEE Transaction on Dielectric and Electrical Insulation, Vol. 2, No. 5, 1995, pp. 774-760.
164. Ross, R., Composition, structure and growth of water trees in polythene, KEMA Scientific and Technical Reports (ISSN 0167-8590), KEMA, the Netherlands, Vol. 8, No. 4, 1990, pp. 209-271.
165. Ross, R. and Smit, J. J., Influence of ageing conditions on water tree growth processes, IEEE Transactions on Electrical Insulation, 1992, pp. 368-371.
166. Anderson, B., Remote breaker racking, Doble Client Conference, Boston, MA, 2008.
167. Babcock, R. O., Application Guide for Power Factor Testing of Circuit Breakers, Megger Inc., Dallas, TX, 2003.
168. Blohm, R., Battery installation and maintenance recommendations, NETA Annual Technical Conference, San Antonio, TX, 2004.
169. Brown, J., Revise the Doble test procedure for SF6 dead tank and vacuum breakers, Doble Client Conference, Boston, MA, 2008.
170. Claesson, L. Stanisic, Z., Wernli, H., and Petterson, K., Safe circuit breaker timing with new technology, Cigre and IEEE International Conference on Condition Monitoring and Diagnosis, Changwon, Korea, April 4, 2006.
171. Fernihough, W. J., Detection of SF6 circuit breaker problems using the Doble test set, Doble Client Conference, Boston, MA, 2008.
172. IEEE Std C37.85-1989, American National Standard for Switchgear-Alternating-Current High-Voltage Power Vacuum Interrupters-Safety Requirements for X-Radiation Limits.
173. IEEE Std 1291-1993, IEEE Guide for Partial Discharge Measurement in Power Switchgear.
174. IEEE Std C37.010-1999, IEEE Application Guide for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis.
175. IEEE Std C37.06-2000, American National Standard AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis-Preferred Ratings and Related Required Capabilities.
176. IEEE Std C37.10.1-2000, Guide for the Selection of Monitoring for Circuit Breakers.
177. IEEE Std 450-2002, IEEE Recommended Practice for Maintenance, Testing, and Replacement of Vented Lead-Acid Batteries for Stationary Applications.
178. IEEE Std C37.48-2005, IEEE Guide for Application, Operation, and Maintenance of High-Voltage Fuses, Distribution Enclosed Single-Pole Air Switches, Fuse Disconnecting Switches, and Accessories.
179. IEEE Std 1188-2005, IEEE Recommended Practice for Maintenance, Testing, and Replacement of Valve-Regulated Lead-Acid (VRLA) Batteries for Stationary Applications.
180. IEEE Std 551-2006 (Violet Book), IEEE Recommended Practice for Calculating Short-Circuit Currents in Industrial and Commercial Power Systems.
181. IEEE Std C37.04-2006, IEEE Standard Rating Structure for AC High-Voltage Circuit Breakers.
182. Jensen, R., ABB Type 15-VHK-500 Vacuum breakers manufactured between 1989 and 1997, Doble Client Conference, Boston, MA, 2008.
183. Knights, M., Tracking down the greenhouse gas SF6 with infrared thermography, Doble Client Conference, Boston, MA, 2008.
184. Leoni, A. R. and Nelson, J. P., Some lessons learned from commissioning substation and medium voltage switchgear equipment, IEEE Paper No. PCIC-2000-XX.
185. Locarno, M., Southern states capacitor switcher problem found by Doble testing, Doble Client Conference, Boston, MA, 2008.
186. Mandeville, J., New battery technology, Doble Client Conference, Boston, MA, 2008.
187. Megger Inc., Instructional Manual for BITE2 Battery Impedance Test Equipment, AVTM246004, Megger Inc., Valley Forge, PA.
188. Megger Inc., Instructional Manual for DLRO200 High Current Low Resistance Ohmmeter, 6172-763, Megger Inc., Dover, U.K.
189. Megger Inc., Instructional Manual for S1-5010 Diagnostic Insulation Tester, 6172-283, Megger Inc., Dover, U.K.
190. Megger Inc., Instructional Manual for S1-552 5 kV Digital Insulation Resistance Tester, S1-552_UG_en_V03 0806, Megger Inc., Dover, U.K.
191. Megger Inc., Battery Testing Guide, MEG-290/MIL/2.5M/4.2004, Megger Inc., Dover, U.K.
192. Megger Inc., A Guide to Low Resistance Testing: Understanding and Measuring Low Resistance to Ensure Electrical System Performance, MEG-429_V04/MIL/2.5M/7.2005, Megger Inc., Dover, U.K.
193. NUREG/CR-6819, Common-Cause Failure Event Insights-Circuit Breakers, Vol. 4, ID 83415, Idaho National Engineering and Environmental Laboratory, Idaho Falls, May 2003.
194. Patterson, C., Field application of partial discharge testing for medium-voltage switchgear, NETA Conference Papers, 2004.
195. Programma Instruments, Instructional Manual for TM1800 Circuit Breaker Analyzer System, CG0757EE, Programma Instruments, Taby, Sweden.
196. Programma Instruments, Instructional Manual for Torkel 820/840/860 Battery Load Units, BS2395EE, Programma Instruments, Taby, Sweden.
197. Programma Instruments, Instructional Manual for Vidar Vacuum Tester, BR0150AE, Programma Instruments, Taby, Sweden.
198. Programma Instruments, Instructional Manual for EGIL Breaker Analyzer, BM0087JE, Programma Instruments, Taby, Sweden.
199. Rogers, D. and Smith, M., Oil circuit breaker (WE 2300-GW-20000) failure due to high moisture content, Doble Client Conference, Boston, MA, 2008.
200. Salinas, A. Southern California Edison, Vacuum bottle monitoring, Doble Client Conference, Boston, MA, 2008.
201. Smeaton, R. W. and Ubert, W. H., Switchgear and Control Handbook, 3rd edn., McGraw Hill Book Company, New York.
202. Tressler, R., Practical aspects of maintaining and testing stationary batteries, NETA Conference Papers, 2004.
203. True, T., Switching 138 kV breakers with capacitors using gang operated switches causes arcing, Doble Client Conference, Boston, MA, 2008.
204. ABB Inc., Installation/Maintenance Instructions for Low Voltage Air-Magnetic Power Circuit Breakers, K-Line 225A through 2000A, Stationary and Draw-Out Frames, Manually and Electrically Operated Mechanisms, ABB Inc., Florence, SC, IB 6.1.12.1-1D, Issue “D” 7-15-06.
205. ANSI C37.16-2000, Low-Voltage Power Circuit Breakers and AC Power Circuit Protectors Preferred Ratings, Related Requirements, and Application Recommendations.
206. ANSI/IEEE C37.13-1995, Standard for Low-Voltage AC Power Circuit Breakers Used in Enclosures.
207. ANSI/IEEE Std 242-1986, IEEE Recommended Practice for Protection and Coordination of Industrial and Commercial Power Systems (Buff Book), New York.
208. ANSI/IEEE Std 242-2001, IEEE Recommended Practice for Protection and Coordination of Industrial and Commercial Power Systems.
209. Casler, C., Electrical inspections with the use of thermography, ultrasound, and ultraviolet technology, NETA Conference Papers, 2008.
210. IEEE Standards Collection, C37, Circuit Breakers, Switchgear, Substations, and Fuses, 7995 Edition, The Institute for Electrical and Electronics Engineers, Inc., New York.
211. IEEE Std 944-1986, IEEE Recommended Practice for the Application and Testing of Uninterruptible Power Supplies for Power Generating Stations.
212. IEEE Std 141-1993 (Redbook), IEEE Recommended Practice for Electric Power Distribution for Industrial Plants.
213. IEEE Std 242-2001 (Buff Book), IEEE Recommended Practice for Protection and Coordination of Industrial and Commercial Power Systems.
214. IEEE Std 1458-2005, IEEE Recommended Practice for the Selection, Field Testing, and Life Expectancy of Molded Case Circuit Breakers for Industrial.
215. IEEE Std 1015-2006 (Blue Book), IEEE Recommended Practice for Applying Low Voltage Circuit Breakers Used in Industrial and Commercial Power Systems.
216. Ignall, R., Power monitoring-How to perform a power survey, NETA Conference Papers, 2008.
217. Megger Inc., A Guide to Low Resistance Testing-Understanding and Measuring Low Resistance to Ensure Electrical System Performance, MEG-429_V04/MIL/2.5M/7.2005, Megger Inc., Dover, U.K.
218. Megger Inc., Instructional Manual for CB-832 Circuit Breaker and Overload Relay Test Set, 9841, Megger Inc., Dallas, TX.
219. Megger Inc., Instructional Manual for CB-845 Circuit Breaker Test Set, 9820, Megger Inc., Dallas, TX.
220. Megger Inc., Instructional Manual for DDA-3000 and DDA-6000 Universal Circuit Breaker Test Set, 17176, Megger Inc., Dallas, TX.
221. Megger Inc., Instructional Manual for High CCA-1600 Circuit Breaker Test Set, 50550, Megger Inc., Dallas, TX.
222. Megger Inc., Instructional Manual for High Current Test Set Model MS-2, 12510, Megger Inc., Dallas, TX.
223. Neitzel, D. K., Neeser, D., and Callanan, M., Preventative maintenance and reliability of low-voltage overcurrent protective devices, IEEE-PCIC Europe 2004 Conference Documentation, 2004.
224. NEMA AB-1, Molded Case Circuit Breakers and Molded Case Switches.
225. NEMA AB-1-2002, Molded Case Circuit Breakers and Molded Case Switches.
226. NEMA AB-1, 2002, Molded-Case Circuit Breakers, Molded Case Switches, and Circuit-Breaker Enclosures, Only Available from UL, See UL 489.
227. NEMA AB-3, 2006, Molded Case Circuit Breakers and Their Application.
228. NEMA AB-4, 2003, Guidelines for Inspection and Preventive Maintenance of Molded Case Circuit Breakers Used in Commercial and Industrial Applications.
229. NEMA C37.16, 2000, Low-Voltage Power Circuit Breakers and AC Power Circuit Protectors-Preferred Ratings, Related Requirements, and Application Recommendations.
230. NEMA C37.17, 1997, Trip Devices for AC and General Purpose DC Low Voltage Power Circuit Breakers.
231. NEMA Standards Publication AB 4, National Electrical Manufacturers Association, Washington, DC.
232. NETA Maintenance Testing Specifications for Electrical Power Distribution Equipment and Systems (NETA MTS-2005), International Electrical Testing Association, 3050 Old Center Ave, Portage, MI, Table 100.18.
233. Schneider Electric USA, Introduction to Field Testing and Maintenance Guide, for Thermal-magnetic and Micrologic® Electronic-trip Molded Case Circuit Breakers, Schneider Electric USA, Palatine, IL, 1/2005 (600DB9901R1/05).
234. Sprague, M. J., Service-life evaluations of low-voltage power circuit breakers and molded-case circuit breakers (Frame Size amperes 800A-4000A).
235. UL 248-1 2000, UL Standard for Safety for Low-Voltage Fuses: Part 1: General Requirements, 2nd edn.; Reprint with revisions through and including August 11, 2005.
236. UL 248-8 and 10, 2000, UL Standard for Safety for Low-Voltage Fuses: Part 8 and 10: Class J & L Fuses, 2nd edn.; Reprint with revisions through and including August 11, 2005.
237. UL 489-2002, UL Standard for Safety Molded-Case Circuit Breakers, Molded-Case Switches, and Circuit-Breaker Enclosures, 10th edn.; Reprint with revisions through and including June 30, 2006.
238. UL 67, UL Standard for Safety for Panelboards, Underwriters Laboratories Inc., Northbrook, IL.
239. UL 248.1-248.16-2000, UL Standard for Safety for Low-Voltage Fuses, Part 1-Part 16.
240. UL-489-1991, Standard for Safety Molded-Case Circuit Breakers, Molded-Case Switches, and Circuit-Breaker Enclosures.
241. UL-489-2002, Standard for Safety Molded-Case Circuit Breakers, Molded-Case Switches, and Circuit-Breaker Enclosures.
242. ANSI/IEEE C57.13.1-1981, Field Testing of Relaying Current Transformers.
243. ANSI/IEEE C57.13-1993.06.01 (R2000), Standard Requirements for Instrument Transformers.
244. ANSI/IEEE Std C57.13.3-1983, IEEE Guide for Grounding of Instrument Transformers.
245. Beach, D., Klotz, S., and Barney, B., Practical Experience in Commissioning Distributed Generation Installations, Basler Electrical Company, Highland, IL, 2002.
246. Gosalia, J., Relay performance testing, NETA Annual Technical Conference, Denver, CO, 2004.
247. Guiliante, T., Makki, A. M., and Taffuri, J., New techniques for dynamic relay testing, NETA Conference Papers, 2007.
248. IEEE Special Publication # 96TP115-0, Relay performance testing, Power System Relaying Committee, Report of Working Group 113.
249. IEEE Std C37.103-2004, IEEE Guide for Differential and Polarizing Relay Circuit Testing.
250. IEEE Std C57.13.3-2005, IEEE Guide for Grounding of Instrument Transformer Secondary Circuits and Cases.
251. IEEE Std C37.90-2005, IEEE Standard for Relays and Relay Systems Associated with Electric Power Apparatus.
252. IEEE Std C57.13.1-2006, IEEE Guide for Field Testing of Relaying Current Transformers.
253. IEEE Std C37.110-2007, IEEE Guide for the Application of Current Transformers Used for Protective Relaying Purposes.
254. Jodice, J. A., Relay Performance Testing, IEEE Transactions on Power Delivery, Vol. 12, No. 1, January 1997.
255. Kumm, J. J., Webber, M. S., Schmeitzer, E. O. III, and Hou, D., Philosophies for testing protective relays, 48th Annual Georgia Tech Protective Relaying Conference, Schweitzer Engineering Laboratories Incorporated, Atlanta, GA, May 1994.
256. Megger Inc., Instructional Manual for MCT-1600 Current Transformer Test Set, 750025, Megger Inc., Dallas, TX.
257. Megger Inc., Instructional Manual for MPRT Protective Relay Test System, 710000, Megger Inc., Dallas, TX.
258. Pieniazek, D. and Williamson, R., Application of relaying class current transformers, NETA Conference Papers, 2006.
259. Programma Instruments, Instructional Manual for Sverker 750/760 Relay Test Unit, ZP-CD01ER05A, Programma Instruments, Taby, Sweden.
260. Relay testing and maintenance, General Electric Company Power Management Technical Publication No. GET-3473B-2000.
261. Tienken, C., Gosalia, J., and Giuliante, A. T., End-to-end testing for routine maintenance, Annual Western Protective Relay Conference, October 21-23, 1997.
262. Werstiuk, C., Back to the basics-Current transformer testing: Parts 1 & II, NETA World, Fall and Winter 2004-2005.
263. White, J., Current transformers-a forgotten piece of the relay system, NETA World, Winter 2004-2005.
264. Young, M. and Horak, J., Commissioning of Numerical Relays, Basler Electrical Company, Highland, IL, 2001.
265. Zavadlov, C., Communicating with modern protective relays, NETA Conference Papers, 2007.
266. Zimmerman, K., Commissioning of protective relay systems, SEL Technical Papers, 2007.
267. Zocholl, S. E., Standard CT accuracy ratings in metal-clad switchgear, NETA Conference Papers, 2006.
268. Zocholl, S. E., Analyzing and Applying Current Transformers, Schweitzer Engineering Laboratories, Inc., WA, 2004.
269. Bethel, N. P., Fault Zone Analysis-Six Part Series on Identifying Motor Defects, PdMA Corporation, Tampa, FL, 2005.
270. Blokhintsev, I. and Patterson, C., Continuous partial discharge monitoring on motors, Doble Client Conference, Boston, MA, 2008.
271. Bruni, K. A., Guidelines for Successful Commutator and Brush Operation, Carbon Products Operation Inc., East Stroudsburg, PA, pp. 1-7.
272. Brynjebo, E., Electrical testing and tabulation of high voltage motors, Doble Client Conference, Boston, MA, 2008.
273. Edwards, D. G., On-line Monitoring of Stator Winding Insulation in High Voltage Motors, Society of Petroleum Engineers, 1989, No. 19272.
274. General Electric Company, Power Consideration for Adjustable Drives, General Electric Company, Drive Dept., Erie, PA (GET-6468B-9/1988).
275. Gleichman, R., Failure modes and field testing of medium voltage motor windings, IEEE Transactions on Industry Applications, Vol. 38, No. 5, September/October 2002.
276. IEEE Std 666-1991, Design Guide for Electric Power Service System for Generating Systems.
277. IEEE Std 115-1995, IEEE Guide: Test Procedures for Synchronous Machines.
278. IEEE Std 43-2000, IEEE Recommended Practice for Testing Insulation Resistance of Rotating Machinery.
279. IEEE Std 43-2000, IEEE Recommended Practice for Testing Insulation Resistance of Rotating Machinery.
280. IEEE Std 1434-2000, IEEE Trial-Use Guide to the Measurement of Partial Discharges in Rotating Machinery.
281. IEEE Std 841-2001, IEEE Standard for the Petroleum and Chemical Industry-Severe Duty Totally Enclosed Fan-Cooled (TEFC) Squirrel Cage Induction Motors-Up to and Including 370 kW (500 hp).
282. IEEE Std 112-2004, IEEE Standard Test Procedure for Polyphase Induction Motors and Generators.
283. IEEE Std 67-2005, IEEE Guide for Operation and Maintenance of Turbine Generator.
284. IEEE Std 415-2006, IEEE Guide for Induction Machinery Maintenance Testing and Failure Analysis.
285. IEEE Std 434-2006, IEEE Guide for Functional Evaluation of Insulation Systems for AC Electric Machines Rated 2300 V and above.
286. IEEE Std 1415-2006, IEEE Guide to Induction Machinery Maintenance Testing and Failure Analysis.
287. Maughan, C., Inspection, test and operating issues with collector rings, Doble Client Conference, Boston, MA, 2008.
288. Megger Inc., Instructional Manual for Delta-3000 10 kV Automated Insulation Test Set, AVTM673001, Megger Inc., Valley Forge, PA.
289. Megger Inc., Instructional Manual for S1-1052 5 kV Digital Insulation Resistance Tester, S1-1052_UG_en_V03 0806, Megger Inc., Dover, U.K.
290. Megger Inc., A Guide to Diagnostic Insulation Testing above 1 kV, MEG-562/3M/5.2007, Megger Inc., Valley Forge, PA.
291. Michalec, J., Thermal imaging of carbon brushes as a maintenance tool, Doble Client Conference, Boston, MA, 2008.
292. NEMA MG-1, Motors and Generators-Includes Revision 1, 2007.
293. O’Donnell, P. (Coordinating Author), IEEE Committee Report, Report of large motor reliability survey of industrial and commercial installations, Parts 1 and 2, IEEE Transaction on Industry Applications, Vol. IA-21, No. 4, July/August 1985, pp. 853-872.
294. O’Donnell, P. (Coordinating Author), IEEE Committee Report, Report of large motor reliability survey of industrial and commercial installations, Parts 3, IEEE Transaction on Industry Applications, Vol. IA, No. 1, January/February 1987, pp. 153-158.
295. Pong, L., Hill, K., Simard, H., and Ryman, V., Condition assessment of RM field poles using M4000 test set, Doble Client Conference, Boston, MA, 2008.
296. Stone, G. C., Partial discharge measurements to asses rotating machine insulation condition: A survey, 1996, IEEE International Symposium on Electrical Insulation, Montreal, Canada, June 1996.
297. Tesla, A. and Tetreault, A., End winding vibration in large rotating machines, Doble Client Conference, Boston, MA, 2008.
298. Thomas, T. M., Integrating static and dynamic electric motor testing into a predictive maintenance program, NETA Conference Papers, 2006.
299. Timperley, J., High Voltage Equipment Condition Assessment with EMI Diagnostics, Doble Client Conference, Boston, MA, 2008.
300. Toliyat, H. A. and Kliman, G. B., Handbook of Electric Motors, Marcel Dekker Inc., New York, 2004.
301. C62.92.2-1989, IEEE Guide for the Application of Neutral Grounding in Electrical Utility Systems, Part II: Grounding of Synchronous Generator Systems.
302. C62.92.4-1991, IEEE Guide for the Application of Neutral Grounding in Electrical Utility Systems, Part IV: Distribution.
303. C62.92.5-1992, IEEE Guide for the Application of Neutral Grounding in Electrical Utility Systems, Part V: Transmission Systems and Sub-Transmission Systems.
304. C62.92.3-1993, IEEE Guide for the Neutral Grounding in Electrical Utility Systems, Part III: Generator Auxiliary System.
305. C62.92.1-2000, IEEE Guide for the Application of Neutral Grounding in Electrical Utility Systems, Part 1: Introduction.
306. Clem, O., Used in company catalog, datasheet, and brochure, Megger/Programma, Valley Forge, PA, 2008.
307. Cunnie, E., Testing the bonding resistance in a grounding electrode system, NETA Conference Papers, 2006.
308. Havens, A., High resistance grounding or what happens when a phase-to-ground fault occurs? NETA Conference Papers, 2005.
309. IEEE Std 81-1983, IEEE Guide for Measuring Earth Resistivity, Ground Impedance, and Earth Surface Potentials of a Ground System.
310. IEEE Std 665-1995, IEEE Guide for Generating Station Grounding.
311. IEEE Std 80-2000, IEEE Guide for Safety in AC Substation Grounding.
312. IEEE Std 1050-2004, IEEE Guide for Instrumentation and Control Equipment Grounding in Generating Stations.
313. IEEE Std 1100-2005 (Emerald Book), IEEE Std 1100-2005, IEEE Recommended Practice for Powering and Grounding Electronic Equipment.
314. IEEE Std 142-2007 (Green Book), IEEE Recommended Practice for Grounding of Industrial and Commercial Power Systems.
315. Jowett, J., Slope method, NETA World, Summer 2002.
316. Jowett, J., Measuring ground resistance-the fall of potential method, NETA World, Spring 2002.
317. Jowett, J., The role of testing in the practice of good grounding, NETA Conference Papers, 2004.
318. Jowett, J., Ground testing in complex, difficult environments, NETA Conference Papers, 2007.
319. Megger Inc., Instructional Manual for DET2/2 Digital Earth Tester, 6171-428 V10, Megger Inc., Dover, U.K.
320. Megger Inc., Instructional Manual for GTS-300 Ground Grid Test Set, 4464400600, Megger Inc., Dallas, TX.
321. Megger Inc., Getting Down to Earth A Practical Guide to Earth Resistance Testing, MEG-456/MIL/5M/11.2005, Megger Inc., Valley Forge, PA.
322. Selkirk, D., Ground-fault detection, charging current and neutral-grounding resistor selection, NETA Conference Papers, 2008.
323. Tajali, R., System grounding for mission-critical power systems, NETA World, Winter, 2004-2005.
324. Vlachos, G., Understanding ground resistance testing, NETA Conference Papers, 2006.
325. ANSI/IEEE C57.110, 1986, Recommended Practice for Establishing Transformer Capacity When Supplying Non-Sinusoidal Load Currents.
326. Dranetz Technologies, Inc., Power Line Harmonics Problems-Causes and Cures, 1994.
327. Dranetz Technologies, Inc., The Dranetz Field Handbook for Power Quality Analysis, Dranetz Technologies, Inc., Edison, NJ, 1991.
328. EC&M Practical Guide to Quality Power for Sensitive Electronic Equipment, Second Edition, DeDad, John and Waggoner, Ray, Intertec Publishing, Overland Park, KS, 1997.
329. EPRI, Wiring and Grounding for Power Quality, Electric Power Research Institute, Palo Alto, CA, 1995.
330. EPRI, Electrotek Concepts, Inc., Power Quality Workbook for Utility and Industrial Applications, TR-105500, Research Project 2935-30, Final Report, October 1995.
331. Fluke Corporation, Applying Power Quality Measurements to Predictive Maintenance, 2005.
332. Fluke Corporation, Basic Power Quality Methodology and Common Culprits, 2004.
333. Fluke Corporation, Common Power Quality Factors Affecting Transformers, 2004.
334. Fluke Corporation, Electrical Noise and Transients, 2004.
335. Fluke Corporation, How Adjustable Speed Drives Affect Power Distribution, 2004.
336. Fluke Corporation, Performing Power Quality Studies and Troubleshooting Loads, 2007.
337. Fluke Corporation, Power Quality Clamp Meter, 2007.
338. Fluke Corporation, Power Quality Measurements at Receptacle Branch Circuits, 2004.
339. Fluke Corporation, Power Quality Troubleshooting with Hand Held Tools, 2004.
340. Fluke Corporation, Reducing Downtime by Troubleshooting Power Quality Disturbances, 2006.
341. Fluke Corporation, Troubleshooting Power Harmonics-Basic Troubleshooting Using Multimeters and Current Clamps, 2004.
342. Grady, W. M. and Gilleskie, R. J., Harmonics and how they relate to power factor, Proceedings of EPRI Power Quality Issues and Opportunities Conference, San Diego, CA, November 1993.
343. Heydt, G. T., Electric Power Quality, Stars in a Circle Publication, Indianapolis, IN.
344. IEEE Std 519-1992, IEEE Recommended Practices and Requirements for Harmonic Control in Electric Power systems, Table 10.3, Table 11.1.
345. IEEE Std 1100-1992 (Emerald Book), IEEE Recommended Practice for Powering and Grounding Sensitive Electronic Equipment.
346. IEEE Std C57.110-1998, IEEE Recommended Practice for Establishing Transformer Capability When Supplying Nonsinusoidal Load Currents.
347. IEEE Tutorial Course, Power System Harmonics, IEEE Power Engineering Education Committee and the IEEE Transmission and Distribution Committee General Systems Subcommittee of the IEEE Power Engineering Society, 84, EHO221-2-PWR.
348. Ignall, R., Power quality monitoring-Seeing what’s on the wires, NETA Conference Papers, 2007.
349. Mack Grady, W., Understanding Power System Harmonics, IEEE Power Engineering Review, Vol. 21, No. 11, November 2001.
350. Megger Inc., Instructional Manual for PA-9 Plus Portable Power Quality Analyzer, AVTMP9P, Megger Inc., Valley Forge, PA, 2007.
351. NIST, FIPS Publication 94-Guidance on Electrical Power for ADP Installations, NIST, Gaithersburg, MD, 1994.
352. Ontario Hydro, Power Quality Reference Guide, Ontario Hydro, Toronto, Ontario, Canada.
353. Pacific Gas and Electric Company, Power System Harmonics, 1993.
354. Rusch, R. J., K-rated transformers, Industry INFO, June 1998.
355. The power of a waveform: Expanded troubleshooting options with the Fluke 345, 2006.
356. Wagner, J. P., Switch Mode Power Conversion in Data Processing Equipment, 1997.
357. ANSI C2-2007, National Electrical Safety Code (NESC), 2009.
358. ANSI Z244.1-1982 (Reaff 1993), Safety Requirements for the Lock Out/Tag Out of Energy Sources.
359. ANSI Z535.4-1998, Product Safety Signs and Labels.
360. ANSI/NFPA 70B-2006, Recommended Practice for Electrical Equipment Maintenance.
361. ASTM D120-95, Standard Specification for Rubber Insulating Gloves.
362. Guide to Industrial Electric Power Distribution. Compiled by the editors of Electrified Industry, B. J. Martin Co., Chicago.
363. Hartman, P., Electric arc flash protective clothing, NETA Conference Papers, 2004.
364. IEEE Std 1584, IEEE Guide for Performing Arc-Flash Hazard Calculations.
365. IEEE Std 141-1993 (Red Book), IEEE Recommended Practice for Electric Power Distribution for Industrial Plants.
366. Inshaw, C. and Toepfer, F., Arc flash compliance practical application of NFPA-70 and IEEE 1584 standards, 73rd Annual International Doble Client Conference, Boston, MA, 2006.
367. Lee, R. H., The other electrical hazards-Electric arc blast burns. IEEE TP IPSD 81-55.
368. Neitzel, D. K., CPE, Protective Devices Maintenance as it Applies to the Arc/Flash Hazard, AVO Training Institute, Dallas, TX, 2004.
369. Neitzel, D. K., Proper protective device maintenance and testing-The difference between life and death, NETA Conference Papers, 2004.
370. NFPA 70E-2004, Standard for Electrical Safety Requirements for Employee Workplaces.
371. NFPA 70E, Standard for Electrical Safety in the Workplace, 2004.
372. NFPA 70E, Standard for Electrical Safety in the Workplace, 2004, Table 130.2(C), Table 130.7(C)(11).
373. NFPA 70-2008, National Electrical Code (NEC).
374. Occupational Safety and Health Administration (OSHA) 29 CFR Part 1910 Subpart S and I, 1910.131, 1910-132-.139, 1910.147, 1910-302-.308, 1910.331-.335, 1910.361-.398 and Appendix A.