Enhancement of geometric accuracy of five-axis machining centers based on identification and compensation of geometric deviations

International Journal of Machine Tools and Manufacture

Volumn 68, Issue , 2013, Pages 11-20

  Tsutsumi, Masaomi ^a   Tone, Shintaro ^a   Kato, Noriyuki ^a   Sato, Ryuta ^b  

^a TOKYO UNIVERSITY OF AGRICULTURE AND TECHNOLOGY   (Japan)

^b KOBE UNIVERSITY   (Japan)

Author keywords

Ball bar measurement; Correction; Five axis machining center; Geometric deviation; Tool center point

Indexed keywords

BALL BAR MEASUREMENTS; BALL-BAR; CALIBRATION METHOD; CARTESIAN COORDINATE SYSTEM; CIRCULAR TRAJECTORY; CONE FRUSTUMS; CYLINDRICAL COORDINATE SYSTEMS; FIVE-AXIS MACHINES; FIVE-AXIS MACHINING CENTERS; GEOMETRIC ACCURACY; GEOMETRIC DEVIATIONS; KINEMATIC ACCURACY; POST PROCESSING; RELATIVE DISPLACEMENT; ROTARY TABLES; THREE-AXIS MOTION; TOOL CENTER POINTS; WORKPIECE;

CUTTING; DATA HANDLING; ELECTRIC POWER FACTOR CORRECTION;

MACHINING CENTERS;

EID: 84873948531     PISSN: 08906955     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijmachtools.2012.12.008     Document Type: Article

References (29)

1. K. Kawasaki, I. Tsuji, Y. Abe, and H. Gunbara Manufacturing method of large-sized spiral bevel gears in cyclo-palloid system using multi-axis control and multi-tasking machine tool Gear Technology 2011 56 61 (August)
2. S. Sakamoto, I. Inasaki, H. Tsukamoto, and T. Ichikizaki Identification of alignment errors in five-axis machining centers with telescoping ball bar Transaction of the Japan Society of Mechanical Engineers Series C 63 605 1997 262 267 (in Japanese)
3. M. Tsutsumi, and A. Saito Identification and compensation of systematic deviations particular to 5-axis machining centers International Journal of Machine Tools and Manufacture 43 8 2003 771 780
4. N. Miyama, T. Saiki, C. Cui, and M. Tsutsumi Generalization of identification method of geometric deviations for five-axis machining centers with a tilting rotary table Transaction of Japan Society of Mechanical Engineers Series C 75 756 2009 2335 2342 in Japanese
5. M. Tsutsumi, N. Miyama, C. Cui, and T. Saiki Generalization of Identification method of geometric deviations for mixed type five-axis machining centres Transaction of the Japan Society of Mechanical Engineers Series C 77 776 2011 1597 1608 (in Japanese)
6. ISO/DIS 10791-6, Test Conditions for Machining Centers - Part 6, Accuracy of Feeds, Seeds and Interpolations, 2011.
7. M.S. Uddin, S. Ibaraki, A. Matsubara, and T. Matsushita Prediction and compensation of machining geometric errors of five-axis machining centers with kinematic errors of five-axis machining centers with kinematic errors Precision Engineering 33 2 2009 194 201
8. M. Wang, J. Hu, and T. Zan Kinematic error separation on five-axis NC machine tool based on telescoping double ball bar Frontiers of Mechanical Engineering in China 5 4 2010 431 437
9. D.-M. Lee, Z. Zhu, K.-I. Lee, and S.-H. Yang Identification and measurement of geometric errors for a five-axis machine tool with a tilting head using a double ball-bar International Journal of Precision Engineering and Manufacturing 12 2 2011 337 343
10. S.H.H. Zargarbashi, and J.R.R. Mayer Single setup estimation of a five-axis machine tool eight link errors by programmed end point constraint and on the fly measurement with Capball sensor International Journal of Machine Tools & Manufacture 49 10 2009 759 766
11. A.W. Khan, and W. Chen A methodology for systematic geometric error compensation in five-axis machine tools International Journal of Advanced Manufacturing Technology 53 5-8 2011 615 628
12. S. Zhu, G. Ding, S. Qin, J. Lei, L. Zhuang, and K. Yan Integrated Geometric error modeling, identification and compensation of CNC machine tools International Journal of Machine Tools and Manufacture 52 1 2012 24 29
13. S. Eskandari, B. Arezoo, A. Abdullah, Positional, geometrical, and thermal errors compensation by tool path modification using three methods of regression, neural networks, and fuzzy logic, International Journal of Advanced Manufacturing Technology, doi:10.1007%2Fs00170-012-4285-y, in press.
14. Y. Ihara, and K. Tanaka Ball bar measurement equivalent to cone frustum cutting on multi-axis machine - comparison of ball bar measurement with cutting test on spindle-tilt type 5-axis MC- Journal of the Japan Society for Precision Engineering 71 12 2005 1553 1557 (in Japanese)
15. T. Matsushita, T. Oki, and A. Matsubara The accuracy of cone frustum machined by five-axis machine tool with tilting table Journal of the Japan Society for Precision Engineering 74 6 2008 632 636 (in Japanese)
16. N. Kato, M. Tsutsumi, Y. Tsuchihashi, D. Yumiza, C. Cui, and Y. Ihara Analysis of NC data for machining test of cone-frustum under simultaneous five-axis control Transaction of the Japan Society of Mechanical Engineers Series C 77 780 2011 3149 3160 (in Japanese)
17. T. Matsushita, and A. Matsubara Identification and compensation of geometric errors in five-axis machine tools with a tilting rotary table using conic trajectories measured by double ball bar Journal of the Japan Society for Precision Engineering 77 6 2011 594 598 (in Japanese)
18. C. Hong, S. Ibaraki, and A. Matsubara Influence of position-dependent geometric errors of rotary axes on a machining test of cone frustum by five-axis machine tools Precision Engineering 35 1 2011 1 11
19. N. Kato, M. Tsutsumi, R. Sato, Analysis of circular trajectory equivalent to cone-frustum milling in five-axis machining centers using motion simulator, International Journal of Machine Tools and Manufacture 64 (2013) 1-11, doi:10.1016/j.ijmachtools.2012.07.013.
20. ISO 10791-7, Test Conditions for Machining Centers - Part 7, Accuracy of a Finished Test Piece, 2012.
21. I. Inasaki, K. Kishinami, S. Sakamoto, N. Sugimura, Y. Takeuchi, and F. Tanaka Form shaping theory of machine tools: fundamentals and applications Yokendo, Tokyo 1997 95 103 (in Japanese)
22. ISO 841, Industrial Automation Systems and Integration - Numerical Control of Machines - Coordinate System and Motion Nomenclature, 2001.
23. S. Ibaraki, and W. Knapp Indirect measurement of volumetric accuracy for three-axis and five-axis machine tools: a review International Journal of Automation Technology 6 2 2012 100 124
24. ISO 230-1, Annex A (informative) Machine Tool coordinate System and Position and Orientation Errors, Test Code for Machine Tools - Part 1: Geometric Accuracy of Machines Operating Under No-load or Quasi-Static Conditions, 2012, pp. 134-146.
25. Renishaw QC20-W Wireless Ballbar System Description and Specifications, Issued 1211 L-8014-1588-04-A, 2011.
26. Y. Kakino, Y. Ihara, K. Satou, and H. Ohtubo A Study on the motion accuracy of NC machine tools (7th report): the measurement of motion accuracy of 5 axis machine by DBB test Journal of the Japan Society for Precision Engineering 60 5 1994 718 722
27. T. Otsuki, S. Ide, T. Sasaki, Numerical Control Device, Patent Publication Number 2009-9274 (in Japanese).
28. T. Oki, Measurement Method of Geometric Errors of Multi-Axis Machine Tools, Patent Publication Number, 2012-30338 (in Japanese).
29. N. Kato, M. Tsutsumi, Y. Tsuchihashi, R. Sato, and Y. Ihara Sensitivity analysis in ballbar measurement of 3D circular interpolation motion equivalent to cone-frustum cutting in five-axis machining centers Transaction of the Japan Society of Mechanical Engineers Series C 78 791 2012 1964 1975 (in Japanese)