Three-dimensional optimisation of a fuel gas channel of a proton exchange membrane fuel cell for maximum current density

International Journal of Energy Research

Volumn 37, Issue 3, 2013, Pages 228-241

  Obayopo, Surajudeen Olanrewaju ^a   Bello Ochende, Tunde ^a   Meyer, Josua Petrus ^a  

^a UNIVERSITY OF PRETORIA   (South Africa)

Author keywords

Computational fluid dynamics; Flow orientation; Fuel cells; Gas diffusion layer; Geometry; Optimal performance; Optimisation; Proton exchange membrane

Indexed keywords

FLOW ORIENTATIONS; GAS DIFFUSION LAYERS; OPTIMAL PERFORMANCE; OPTIMISATIONS; PROTON EXCHANGE MEMBRANES;

CHANNEL FLOW; COMPUTATIONAL FLUID DYNAMICS; COMPUTER APPLICATIONS; CONSERVATION; DIFFUSION IN GASES; FLOW RATE; FOSSIL FUELS; FUEL CELLS; FUEL SYSTEMS; GAS FUEL PURIFICATION; GEOMETRY; LOW TEMPERATURE OPERATIONS; OPTIMIZATION; POROSITY; THREE DIMENSIONAL;

PROTON EXCHANGE MEMBRANE FUEL CELLS (PEMFC);

EID: 84873713981     PISSN: 0363907X     EISSN: 1099114X     Source Type: Journal    
DOI: 10.1002/er.1935     Document Type: Article

References (52)

1. Rowe A, Li X. Mathematical modeling of proton exchange membrane fuel cells. Journal of Power Sources 2001; 102:82-96.
2. Hussain MM, Baschuk JJ, Li X, Dincer I. Thermodynamic analysis of a PEM fuel cell power system. International Journal of Thermal Sciences 2005; 44:903-911.
3. Jung HM, Lee WY, Park JS, Kim CS. Numerical analysis of a polymer electrolyte fuel cell. International Journal of Hydrogen Energy 2004; 29:945-954.
4. Du L, Jana SC. Highly conductive/graphite composites for bipolar plates in proton exchange membrane fuel cells. Journal of Power Sources 2007; 172:734-741.
5. Um S, Wang CY, Chen KS. Computational fluid dynamics modeling of proton exchange membrane fuel cells. Journal of the Electrochemical Society 2000; 147(12):4485-4493.
6. Bernardi DM. Water balance calculations for solid polymer electrolyte fuel cells. Journal of the Electrochemical Society 1990; 137(12):3344-3345.
7. Bernardi DM, Verbrugge MW. Mathematical model of a gas diffusion electrode bonded to a polymer electrolyte. AICHE Journal 1991; 37(8):1151-1163.
8. Springer TE, Zawodzinski TA, Gottesfeld S. Polymer electrolyte fuel cell model. Journal of the Electrochemical Society 1991; 138(8):2334-2342.
9. Kazim A, Forges P, Liu HT. Effects of cathode operating conditions on performance of a PEM fuel cell with interdigitated flow fields. International Journal of Energy Research 2003; 27:401-414.
10. Kulikovsky AA. Two models of a PEFC: Semi-analytical vs numerical. International Journal of Energy Research 2005; 29:1153-1165.
11. Marr C, Li X. An engineering model of proton exchange membrane fuel cell performance. ARI 1998; 50:190-200.
12. Chen KS, Hickner MA, Noble DR. Simplified models for predicting the onset of liquid water droplet instability at the gas diffusion layer/gas flow channel interface. International Journal of Energy Research 2005; 29:1113-1132.
13. Dutta S, Shimpalee S, Van Zee JW. Numerical prediction of mass exchange between cathode and anode channels in a PEM fuel cell. International Journal of Heat Mass Transfer 2001; 44:2029-2042.
14. Yuan W, Tang Y, Pan M, Li Z, Tang B. Model prediction of effects of operating parameters on proton exchange membrane fuel cell performance. Renewable Energy 2010; 35:656-666.
15. Hontanon E, Escudero MJ, Bautista C, Garcia-Ybarra PL, Daza L. Optimization of flow-field in polymer electrolyte membrane fuel cells using computational fluid dynamics techniques. Journal of Power Sources 2000; 86:363-368.
16. Wang XD, Duan YY, Yan WM. Numerical study of cell performance and local Transport phenomena in PEM fuel cells with various flow channel area ratios. Journal of Power Sources 2007; 172:265-277.
17. Sinha PK, Wang C-Y, Beuscher U. Effect of flow field design on the performance of elevated-temperature polymer electrolyte fuel cells. International Journal of Energy Research 2007; 31:390-411.
18. Golpaygan A, Sarchami A, Ashgriz N. Three-dimensional multiphase flow model to study channel flow dynamics of PEM fuel cells. International Journal of Energy Research 2010. doi:10.1002/er.1775.
19. Yan Q, Toghiani H, Causey H. Steady state and dynamic performance of proton exchange membrane fuel cells (PEMFCs) under various operating conditions and load changes. Journal of Power Sources 2006; 161:492-502.
20. Vargas JVC, Bejan A. Thermodynamic optimization of internal structure in a fuel cell. International Journal of Energy Research 2004; 28:319-339.
21. Zhang Z, Jia L. Parametric study of the porous cathode in the PEM fuel cell. International Journal of Energy Research 2009; 33:52-61.
22. Zamel N, Li X. A parametric study of multi-phase and multi-species transport in in the cathode of PEM fuel cells. International Journal of Energy Research 2008; 32:698-721.
23. Huang W, Zhou B, Sobiesiak A. Along-channel mathematical modelling for proton exchange membrane fuel cells. International Journal of Energy Research 2005; 29:1051-1071.
24. Cheddie DF, Munroe NDH. A two-phase model of an intermediate temperature PEM fuel cell. International Journal of Hydrogen Energy 2007; 32:832-841.
25. Springer TE, Wilson MS, Gottesfeld S. Modeling and experimental diagnostics in polymer electrolyte fuel cells. Journal of the Electrochemical Society 1993; 140(12):3513-3526.
26. Mench MM, Wang CY, Ishikawa M. In-situ current distribution measurements in polymer electrolyte fuel cells. Journal of the Electrochemical Society 2003; 150(8):A1052-A1059.
27. Weizhong L, Zhixiang L, Cheng W, Zongqiang M, Milin Z. The effects of pinholes on proton exchange membrane fuel cell performance. International Journal of Energy Research 2010; 35:24-30.
28. Ferng YM, Su A, Lu SM. Experiment and simulation investigations for effects of flow channel patterns on the PEMFC performance. International Journal of Energy Research 2008; 32:12-23.
29. Inoue G, Matsukuma Y, Minemoto M. Effect of gas channel depth on current density distribution of polymer electrolyte fuel cell by numerical analysis including gas flow through gas diffusion layer. Journal of Power Sources 2006; 157:136-152.
30. Liu X, Guo H, Ma C. Water flooding and pressure drop characteristics in flow channels of proton exchange membrane fuel cells. Electrochimica Acta 2007; 52:3607-3614.
31. Rodatz P, Buechi F, Onder C, Guzzella L. Operational aspects of a large PEFC stack under practical conditions. Journal of Power Sources 2004; 128:208-217.
32. Maharudrayya S, Jayanti S, Deshpande AP. Pressure drop and flow distribution in multiple parallel-channel configurations used in proton- exchange membrane fuel cell stacks. Journal of Power Sources 2006; 157:358-367.
33. Ahmed DH, Sung HJ. Effects of channel geometrical configuration and shoulder width on PEMFC performance at high current density. Journal of Power Sources 2006; 162:327-339.
34. Cheng CH, Lin HH, Lai G. Design for geometric parameters of PEM fuel cell by integrating computational fluid dynamics code with optimisation method. Journal of Power Sources 2007; 165:803-813.
35. Ansys. Fluent® 12.0 Users Guide Documentation. Ansys Inc., Southpointe, SAS: Canonsburg, Pennsylvania, USA, 2009.
36. Nguyen TV. Modeling two-phase flow in the porous electrodes of proton exchange membrane fuel cells using the interdigitated flow fields. Tutorials in Electrochemical Engineering Mathematical Modeling 1999; 99(14):222-241.
37. Nam JH, Karviany M. Effective diffusivity and water-saturation distribution in Single-and two-layer PEMFC diffusion medium. International Journal of Heat Mass Transfer 2003; 46:4595-4611.
38. Kim YB. Study on the effect of humidity and stoichiometry on the water saturation of PEM fuel cells. International Journal of Energy Research 2011. doi:10.1002/er.1845.
39. Maharudrayya S, Jayanti S, Deshpande AP. Pressure losses in laminar flow through serpentine channels in fuel cell stacks. Journal of Power Sources 2004; 138:1-13.
40. White FM. Fluid Mechanics. McGraw Hill: New York, 1986.
41. White FM. Viscous Fluid Flow. New York: McGraw Hill, 1991; 119-122.
42. Mench MM. Fuel Cell Engines. John Wiley & Sons: New Jersey, 2008.
43. AIAA. Guide for the verification and validation of computational fluid dynamics simulations; AIAA G-077-1998, 1998.
44. ASME Editorial Board. Journal of heat transfer editorial policy statement on numerical accuracy. ASME Journal of Heat Transfer 1994; 116:797-798.
45. Pantakar SV. Numerical Heat Transfer and Fluid Flow. Hemisphere Publishing Corp.: New York, 1980.
46. Tao WQ, Min CH, Liu XL, He YL, Yin BH, Jiang W. Parameter sensitivity examination and discussion of PEM fuel cell simulation model validation Part I. Current status of modeling research and model development. Journal of Power Sources 2006; 160:359-373.
47. Wang L, Husar A, Zhou T, Liu H. A parametric study of PEM fuel cell performances. International Journal of Hydrogen Energy 2003; 28:1263-1272.
48. Berning T, Djilali N. Journal of the Electrochemical Society 2003; 150(12):A1598-A1607.
49. Labaek J, Bang M, Kaer SK. Flow and pressure distribution in fuel cell manifolds. ASME Journal of Fuel Science and Technology 2010; 7: 061001-1-061001-8.
50. Lin HH, Cheng CH, Soong CY, Chen F, Yan WM. Optimisation of key parameters in the proton exchange membrane fuel cell. Journal of Power Sources 2006; 162:246-254.
51. Wang L, Liu H. Performance studies of PEM fuel cells with interdigitated flow fields. Journal of Power Sources 2004; 134:185-196.
52. Watkins DS, Dircks KW, Epp DG. Novel fuel cell fluid flow field plate. US Patent 4988583; 1991.