Reactive processing of maleic anhydride-grafted poly(butylene succinate) and the compatibilizing effect on poly(butylene succinate) nanocomposites

Express Polymer Letters

Volumn 7, Issue 4, 2013, Pages 340-354

  Phua, Y J ^a,b   Chow, W S ^a,b   Mohd Ishak, Z A ^a,b  

^a SCHOOL OF CHEMICAL ENGINEERING   (Malaysia)

^b SCHOOL OF MATERIALS AND MINERAL RESOURCES ENGINEERING   (Malaysia)

Author keywords

Biodegradable polymers; Mechanical properties; Nanocomposites; Reinforcements

Indexed keywords

BIODEGRADABLE POLYMERS; BUTENES; DIFFERENTIAL SCANNING CALORIMETRY; FOURIER TRANSFORM INFRARED SPECTROSCOPY; GRAFTING (CHEMICAL); HIGH RESOLUTION TRANSMISSION ELECTRON MICROSCOPY; MALEIC ANHYDRIDE; NUCLEAR MAGNETIC RESONANCE; NUCLEAR MAGNETIC RESONANCE SPECTROSCOPY; SCANNING ELECTRON MICROSCOPY; THERMODYNAMIC STABILITY; THERMOGRAVIMETRIC ANALYSIS; X RAY DIFFRACTION;

DEGREES OF GRAFTING; FILLER-MATRIX; GRAFTING EFFICIENCY; GRAFTING REACTIONS; MATRIX; ORGANO-MONTMORILLONITE; POLY (BUTYLENES SUCCINATE); POLYBUTYLENE SUCCINATE; REACTIVE PROCESSING; SYNTHESISED;

NANOCOMPOSITES;

EID: 84873480995     PISSN: 1788618X     EISSN: None     Source Type: Journal    
DOI: 10.3144/expresspolymlett.2013.31     Document Type: Article

References (52)

1. LeBaron P. C., Wang Z., Pinnavaia T. J.: Polymer-layered silicate nanocomposites: An overview. Applied Clay Science, 15, 11-29 (1999). DOI: 10.1016/S0169-1317(99)00017-4
2. Alexandre M., Dubois P.: Polymer-layered silicate nanocomposites: Preparation, properties and uses of a new class of materials. Materials Science and Engineering R: Reports, 28, 1-63 (2000). DOI: 10.1016/S0927-796X(00)00012-7
3. Rajesh J. J., Soulestin J., Lacrampe M. F., Krawczak P.: Effect of injection molding parameters on nano - fillers dispersion in masterbatch based PP-clay nano - composites. Express Polymer Letters, 6, 237-248 (2012). DOI: 10.3144/expresspolymlett.2012.26
4. Li Y., Zhao B., Xie S., Zhang S.: Synthesis and properties of poly(methyl methacrylate)/montmorillonite (PMMA/MMT) nanocomposites. Polymer International, 52, 892-898 (2003). DOI: 10.1002/pi.1121
5. Zhao C., Qin H., Gong F., Feng M., Zhang S., Yang M.: Mechanical, thermal and flammability properties of polyethylene/clay nanocomposites. Polymer Degradation and Stability, 87, 183-189 (2005). DOI: 10.1016/j.polymdegradstab.2004.08.005
6. Rousseaux D. D. J., Sallem-Idrissi N., Baudouin A-C., Devaux J., Godard P., Marchand-Brynaert J., Sclavons M.: Water-assisted extrusion of polypropylene/clay nanocomposites: A comprehensive study. Polymer, 52, 443-451 (2011). DOI: 10.1016/j.polymer.2010.11.027
7. Yano K., Usuki A., Okada A., Kurauchi T., Kamigaito O.: Synthesis and properties of polyimide-clay hybrid. Journal of Polymer Science Part A: Polymer Chemistry, 31, 2493-2498 (1993). DOI: 10.1002/pola.1993.080311009
8. Gilman J. W., Jackson C. L., Morgan A. B., Harris R., Manias E., Giannelis E. P., Wuthenow M., Hilton D., Phillips S. H.: Flammability properties of polymer- layered-silicate nanocomposites. Polypropylene and polystyrene nanocomposites. Chemistry of Materials, 12, 1866-1873 (2000). DOI: 10.1021/cm0001760
9. Timochenco L., Grassi V. G., Dal Pizzol M., Costa J. M., Castellares L. G., Sayer C., Machado R. A. F., Araújo P. H. H.: Swelling of organoclays in styrene. Effect on flammability in polystyrene nanocomposites. Express Polymer Letters, 4, 500-508 (2010). DOI: 10.3144/expresspolymlett.2010.63
10. Okamoto K., Ray S. S., Okamoto M.: New poly(butylene succinate)/layered silicate nanocomposites. II. Effect of organically modified layered silicates on structure, properties, melt rheology, and biodegradability. Journal of Polymer Science Part B: Polymer Physics, 41, 3160-3172 (2003). DOI: 10.1002/polb.10708
11. Someya Y., Nakazato T., Teramoto N., Shibata M.: Thermal and mechanical properties of poly(butylene succinate) nanocomposites with various organo-modified montmorillonites. Journal of Applied Polymer Science, 91, 1463-1475 (2003). DOI: 10.1002/app.13366
12. Chen G-X., Kim E-S., Yoon J-S.: Poly(butylene succinate)/ twice functionalized organoclay nanocomposites: Preparation, characterization, and properties. Journal of Applied Polymer Science, 98, 1727-1732 (2005). DOI: 10.1002/app.22264
13. Fujimaki T.: Processability and properties of aliphatic polyesters, 'BIONOLLE', synthesized by polycondensation reaction. Polymer Degradation and Stability, 59, 209-214 (1998). DOI: 10.1016/S0141-3910(97)00220-6
14. Chieng B. W., Ibrahim N. A., Wan Yunus W. M. Z.: Effect of organo-modified montmorillonite on poly (butylene succinate)/poly(butylene adipate-co-terephthalate) nanocomposites. Express Polymer Letters, 4, 404-414 (2010). DOI: 10.3144/expresspolymlett.2010.51
15. Phua Y. J., Chow W. S., Mohd Ishak Z. A.: Poly(butylene succinate)/ organo-montmorillonite nanocomposites: Effects of the organoclay content on mechanical, thermal, and moisture absorption properties. Journal of Thermoplastic Composite Materials, 24, 133-151 (2010). DOI: 10.1177/0892705710376469
16. Phua Y. J., Chow W. S., Mohd Ishak Z. A.: Mechanical properties and structure development in poly(butylene succinate)/organo-montmorillonite nanocomposites under uniaxial cold rolling. Express Polymer Letters, 5, 93-103 (2011). DOI: 10.3144/expresspolymlett.2011.11
17. Nwabunma D., Kyu T.: Polyolefin composites. Wiley- Interscience, New Jersey (2008).
18. Pegoretti A., Dorigato A., Penati A.: Tensile mechanical response of polyethylene-clay nanocomposites. Express Polymer Letters, 1, 123-131 (2007). DOI: 10.3144/expresspolymlett.2007.21
19. Petersson L., Oksman K., Mathew A. P: Using maleic anhydride grafted poly(lactic acid) as a compatibilizer in poly(lactic acid)/layered-silicate nanocomposites. Journal of Applied Polymer Science, 102, 1852-1862 (2006). DOI: 10.1002/app.24121
20. Lai S-M., Li H-C., Liao Y-C.: Properties and preparation of compatibilized nylon 6 nanocomposites/ABS blends: Part II - Physical and thermal properties. European Polymer Journal, 43, 1660-1671 (2007). DOI: 10.1016/j.eurpolymj.2007.02.009
21. Kusmono, Mohd Ishak Z. A., Chow W. S., Takeichi T., Rochmadi: Enhancement of properties of PA6/PP nano - composites via organic modification and compatibilization. Express Polymer Letters, 2, 655-664 (2008). DOI: 10.3144/expresspolymlett.2008.78
22. López-Quintanilla M. L., Sánchez-Valdés S., Ramos de Valle L. F., Medellín-Rodríguez F. J.: Effect of some compatibilizing agents on clay dispersion of poly - propylene-clay nanocomposites. Journal of Applied Polymer Science, 100, 4748-4756 (2006). DOI: 10.1002/app.23262
23. Kusmono, Mohd Ishak Z. A., Chow W. S., Takeichi T., Rochmadi: Compatibilizing effect of SEBS-g-MA on the mechanical properties of different types of OMMT filled polyamide 6/polypropylene nanocomposites. Composites Part A: Applied Science and Manufacturing, 39, 1802-1814 (2008). DOI: 10.1016/j.compositesa.2008.08.009
24. Mohanty S., Nayak S. K.: Effect of clay exfoliation and organic modification on morphological, dynamic mechanical, and thermal behavior of melt-compounded polyamide-6 nanocomposites. Polymer Composites, 28, 153-162 (2007). DOI: 10.1002/pc.20284
25. Qiu Z., Yang W.: Crystallization kinetics and morphology of poly(butylene succinate)/poly(vinyl phenol) blend. Polymer, 47, 6429-6437 (2006). DOI: 10.1016/j.polymer.2006.07.001
26. Mani R., Bhattacharya M., Tang J.: Functionalization of polyesters with maleic anhydride by reactive extrusion. Journal of Polymer Science Part A: Polymer Chemistry, 37, 1693-1702 (1999). DOI: 10.1002/(SICI)1099-0518(19990601)37:11<1693::AID-POLA15>3.0.CO;2-Y
27. Tserki V., Matzinos P., Panayiotou C.: Novel bio - degradable composites based on treated lignocellulosic waste flour as filler. Part II. Development of bio - degradable composites using treated and compatibilized waste flour. Composites Part A: Applied Science and Manufacturing, 37, 1231-1238 (2006). DOI: 10.1016/j.compositesa.2005.09.004
28. Kim H-S., Lee B-H., Choi S-W., Kim S., Kim H-J.: The effect of types of maleic anhydride-grafted poly - propylene (MAPP) on the interfacial adhesion properties of bio-flour-filled polypropylene composites. Composites Part A: Applied Science and Manufacturing, 38, 1473-1482 (2007). DOI: 10.1016/j.compositesa.2007.01.004
29. Phua Y. J., Chow W. S., Mohd Ishak Z. A.: The hydrolytic effect of moisture and hygrothermal aging on poly(butylene succinate)/organo-montmorillonite nanocomposites. Polymer Degradation and Stability, 96, 1194-1203 (2011). DOI: 10.1016/j.polymdegradstab.2011.04.017
30. Sclavons M., Laurent M., Devaux J., Carlier V.: Maleic anhydride-grafted polypropylene: FTIR study of a model polymer grafted by ene-reaction. Polymer, 46, 8062-8067 (2005). DOI: 10.1016/j.polymer.2005.06.115
31. Chow W. S., Mohd Ishak Z. A., Karger-Kocsis J., Apostolov A. A., Ishiaku U. S.: Compatibilizing effect of maleated polypropylene on the mechanical properties and morphology of injection molded polyamide 6/ polypropylene/organoclay nanocomposites. Polymer, 44, 7427-7440 (2003). DOI: 10.1016/j.polymer.2003.09.006
32. Mishra J. K., Hwang K-J., Ha C-S.: Preparation, mechanical and rheological properties of a thermoplastic polyolefin (TPO)/organoclay nanocomposite with reference to the effect of maleic anhydride modified polypropylene as a compatibilizer. Polymer, 46, 1995-2002 (2005). DOI: 10.1016/j.polymer.2004.12.044
33. Shen Z., Simon G. P., Cheng Y-B.: Comparison of solution intercalation and melt intercalation of polymer- clay nanocomposites. Polymer, 43, 4251-4260 (2002). DOI: 10.1016/S0032-3861(02)00230-6
34. Parija S., Nayak S. K., Verma S. K., Tripathy S. S.: Studies on physico-mechanical properties and thermal characteristics of polypropylene/layered silicate nano - composites. Polymer Composites, 25, 646-652 (2004). DOI: 10.1002/pc.20059
35. Samal S. K., Nayak S. K., Mohanty S.: Polypropylene nanocomposites: Effect of organo-modified layered silicates on mechanical, thermal & morphological performance. Journal of Thermoplastic Composite Materials, 21, 243-263 (2008). DOI: 10.1177/0892705708089476
36. Ray S. S., Bousmina M., Okamoto K.: Structure and properties of nanocomposites based on poly(butylene succinate-co-adipate) and organically modified montmorillonite. Macromolecular Materials and Engineering, 290, 759-768 (2005). DOI: 10.1002/mame.200500203
37. Vega-Baudrit J., Sibaja M., Martín-Martínez J. M., Nakayama K., Masuda T., Cao A.: Characterization of the biodegradable polymer bionolle. in 'New developments in polymer analysis, stabilization and degradation' (ed.: Zaikov G. E. Jiménez A.) Nova Science, New York, 57-71 (2005).
38. Pang M. Z., Qiao J. J., Jiao J., Wang S. J., Xiao M., Meng Y. Z.: Miscibility and properties of completely biodegradable blends of poly(propylene carbonate) and poly(butylene succinate). Journal of Applied Polymer Science, 107, 2854-2860 (2008). DOI: 10.1002/app.27252
39. Chiu F-C., Lai S-M., Chen Y-L., Lee T-H.: Investigation on the polyamide 6/organoclay nanocomposites with or without a maleated polyolefin elastomer as a toughener. Polymer, 46, 11600-11609 (2005). DOI: 10.1016/j.polymer.2005.09.077
40. Minhaz-Ul Haque M., Alvarez V., Paci M., Pracella M.: Processing, compatibilization and properties of ternary composites of Mater-Bi with polyolefins and hemp fibres. Composites Part A: Applied Science and Manufacturing, 42, 2060-2069 (2011). DOI: 10.1016/j.compositesa.2011.09.015
41. Xu W., Liang G., Wang W., Tang S., He P., Pan W-P.: Poly(propylene)-poly(propylene)-grafted maleic anhydride- organic montmorillonite (PP-PP-g-MAH-Org- MMT) nanocomposites. II. Nonisothermal crystallization kinetics. Journal of Applied Polymer Science, 88, 3093-3099 (2003). DOI: 10.1002/app.11974
42. Ding C., Jia D., He H., Guo B., Hong H.: How organomontmorillonite truly affects the structure and properties of polypropylene. Polymer Testing, 24, 94-100 (2005). DOI: 10.1016/j.polymertesting.2004.06.005
43. Kusmono, Mohd Ishak Z. A., Chow W. S., Takeichi T., Rochmadi: Influence of SEBS-g-MA on morphology, mechanical, and thermal properties of PA6/PP/organoclay nanocomposites. European Polymer Journal, 44, 1023-1039 (2008). DOI: 10.1016/j.eurpolymj.2008.01.019
44. Cui W., Jiao Q., Zhao Y., Li H., Liu H., Zhou M.: Preparation of poly(ethylene terephthalate)/layered double hydroxide nanocomposites by in-situ polymerization and their thermal property. Express Polymer Letters, 6, 485-493 (2012). DOI: 10.3144/expresspolymlett.2012.51
45. Lee D. C., Jang L. W.: Preparation and characterization of PMMA-clay hybrid composite by emulsion polymerization. Journal of Applied Polymer Science, 61, 1117-1122 (1996). DOI: 10.1002/(SICI)1097-4628(19960815)61:7<1117::AID-APP7>3.0.CO;2-P
46. Liang Z-M., Yin J., Wu J-H., Qiu Z-X., He F-F.: Polyimide/ montmorillonite nanocomposites with photo - lithographic properties. European Polymer Journal, 40, 307-314 (2004). DOI: 10.1016/j.eurpolymj.2003.09.020
47. Zhu J., Wilkie C. A.: Thermal and fire studies on polystyrene- clay nanocomposites. Polymer International, 49, 1158-1163 (2000). DOI: 10.1002/1097-0126(200010)49:10<1158::AIDPI505> 3.0.CO;2-G
48. Song L., Hu Y., Tang Y., Zhang R., Chen Z., Fan W.: Study on the properties of flame retardant polyure - thane/organoclay nanocomposite. Polymer Degradation and Stability, 87, 111-116 (2005). DOI: 10.1016/j.polymdegradstab.2004.07.012
49. Cai Y., Wu N., Wei Q., Zhang K., Xu Q., Gao W., Song L., Hu Y.: Structure, surface morphology, thermal and flammability characterizations of polyamide 6/organicmodified Fe-montmorillonite nanocomposite fibers functionalized by sputter coating of silicon. Surface and Coatings Technology, 203, 264-270 (2008). DOI: 10.1016/j.surfcoat.2008.08.076
50. Cui L., Khramov D. M., Bielawski C. W., Hunter D. L., Yoon P. J., Paul D. R.: Effect of organoclay purity and degradation on nanocomposite performance, Part 1: Surfactant degradation. Polymer, 49, 3751-3761 (2008). DOI: 10.1016/j.polymer.2008.06.029
51. Zhai H., Xu W., Guo H., Zhou Z., Shen S., Song Q.: Preparation and characterization of PE and PE-g-MAH/ montmorillonite nanocomposites. European Polymer Journal, 40, 2539-2545 (2004). DOI: 10.1016/j.eurpolymj.2004.07.009
52. Lonkar S. P., Therias S., Leroux F., Gardette J. L., Singh R. P.: Influence of reactive compatibilization on the structure and properties of PP/LDH nanocomposites. Polymer International, 60, 1688-1696 (2011). DOI: 10.1002/pi.3129