Wind turbine bearing failure detection using generator stator current homopolar component ensemble empirical mode decomposition

IECON Proceedings (Industrial Electronics Conference)

Volumn , Issue , 2012, Pages 3937-3942

  Amirat, Yassine ^a   Choqueuse, Vincent ^b   Benbouzid, Mohamed ^b  

^a Institut Superieur de l'Electronique et du Numerique   (France)

^b UNIVERSITÉ DE BRETAGNE OCCIDENTALE   (France)

Author keywords

bearing failure; ensemble empirical mode decomposition; homopolar component; induction generator; stator current; Wind turbine

Indexed keywords

BEARING FAILURES; ELECTRICAL MACHINE; ENSEMBLE EMPIRICAL MODE DECOMPOSITION; FAILURE DETECTION; GENERATOR STATORS; HOMOPOLAR COMPONENT; MAINTENANCE COST; NONSTATIONARY; STATOR CURRENTS; WIND ENERGY CONVERSION SYSTEM; WIND FARM;

ASYNCHRONOUS GENERATORS; ELECTRIC MACHINERY; ELECTRIC UTILITIES; INDUSTRIAL ELECTRONICS; MAINTENANCE; STATORS; WIND POWER;

WIND TURBINES;

EID: 84872954072     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1109/IECON.2012.6389263     Document Type: Conference Paper

References (29)

1. Y. Amirat, M. Benbouzid, E. AI-Ahmar, B. Bensaker, and S. Turri, "A brief status on condition monitoring and fault diagnosis in wind energy conversion systems," Renewable and Sustainable Energy Reviews, vol 13, no. 9, pp. 2629-2636, 2009.
2. B. Lu, Y. Li, X. Wu and Z. Yang, "A review of recent advances in wind turbine condition monitoring and fault diagnosis", in Proceedings of the 2009IEEE PEMWA, Lincoln (USA), pp. 1-7, June 2009.
3. W. Yang, P. J. Tavner, C. J. Crabtree and M. Wilkinson, "Cost-effective condition monitoring for wind turbines," IEEE Trans. Industrial Electronics, vol. 57, no. 1, pp. 263-271, January 2010.
4. M. Benbouzid, "A review of induction motors signature analysis as a medium for faults detection," IEEE Trans. Industrial Electronics, vol 47, no. 5, pp. 984-993, October 2000.
5. J. Antonino-Daviu, M. Riera-Guasp, M. Pineda-Sanchez, and R.B. Perez, "A critical comparison between DWT and Hilbert-Huang-based methods for the diagnosis of rotor bar failures in induction machines," IEEE Trans. Industry Applications, vol 45, no. 5, pp. 1794-1803, September/October 2009.
6. S. Rajagopalan,. I. A. Restrepo,. I. Aller, T. Habetler, and R. Harley, "Non stationary motor fault detection using recent quadratic time frequency representations," IEEE Trans. Industry Applications, vol. 44, no. 3, pp. 735-744, May/June 2008.
7. J. Cusido, L. Romeral, J. A Ortega, J. A Rosero and AG. Espinosa, "Fault detection in induction machines using power spectral density in wavelet decomposition," IEEE Trans. Industrial Electronics, vol. 55, no. 2, pp. 633-643, February 2008.
8. M. Blodt, D. Bonacci, J. Regnier, M. Chabert, and J. Faucher, "On-line monitoring of mechanical faults in variable-speed induction motor drives using the Wigner distribution," IEEE Trans. Industrial Electronics, vol. 55, no. 2, pp., 522-533, February 2008.
9. E. H. EI Bouchikhi, V. Choqueuse, M. E. H. Benbouzid, J.F Charpentier and G. Barakat, "A comparative study of time-frequency representations for fault detection in wind turbine," in Proceedings of the 2011 IEEE IECON, Melbourne (Australia), pp. 3584-3589, November 2011.
10. P. Zhang; Y. Du; T. G. Habetler and B. Lu, "A survey of condition monitoring and protection methods for medium-voltage induction motors," IEEE Trans. Industry Applications, vol. 47, no. 1, pp. 34-46, January/February 2011.
11. P.J. Tavner, "Review of condition monitoring of rotating electrical machines," IET Electric Power Applications, vol. 2, no. 4, pp. 215-247, July 2008.
12. F. Immovilli, A Bellini, R. Rubini and C. Tassoni, "Diagnosis of bearing faults in induction machines by vibration or current signals: A critical comparison," IEEE Trans. Industry Applications, vol. 46, no. 4, pp. 1350-1359, July/August 2010.
13. A Ibrahim, M. EI Badaoui, F. Guillet and F. ; Bonnardot, "A New bearing fault detection method in induction machines based on instantaneous power factor," IEEE Trans. Industrial Electronics, vol. 55, no. 12, pp. 4252-4259, December 2008.
14. Y. Amirat, V. Choqueuse and M.E. H. Benbouzid, "Condition monitoring of wind turbines based on amplitude demodulation," in Proceedings of the 2010 IEEE ECCE'IO, Atlanta (USA), pp. 2417-2421, September 2010.
15. J. R. Stack, R. G. Harley and T. G. Habetler, "An amplitude modulation detector for fault diagnosis in rolling element bearings," IEEE Trans. Industrial Electronics, vol. 51, no. 5, pp. 1097-1102, October 2004.
16. L. Frosini and E. Bassi, "Stator current and motor efficiency as indicators for different types of bearing fault in induction motor," IEEE Trans. Industrial Electronics, vol. 57, no. 1, pp. 244-251. January 2010.
17. J. Kamwa, AK. Pradhan and G. Joos, "Robust detection and analysis of power system oscillations using the Teager-Kaiser energy operator," IEEE Trans. Power Systems, vol. 26, no. 1, pp. 323-333, February 2011.
18. B. Trajin, M. Chabert, J. Regnier, and J. Faucher, "Hilbert versus Concordia transform for three phase machine stator current time-frequency monitoring," Mechanical systems & signal processing, vol. 23, no. 8, pp. 2648-2657, November 2009.
19. J.Y. Onel and M.E. H. Benbouzid, "Induction motor bearing failure detection and diagnosis: Park and Concordia transform approaches comparative study," IEEEIASME Trans. Mechatronics, vol. 13, no. 2, pp. 257-262, April 2008.
20. V. Choqueuse, M. E. H. Benbouzid, Y. Amirat and S. Turri, "Diagnosis of three-phase electrical machines using multidimensional demodulation techniques," IEEE Trans. Industrial Electronics, vol. 59, issue 4, pp. 2014-2023, April 2012.
21. W. Zhou, T. G. Habetler and R. G. Harley, "Bearing fault detection via stator current noise cancellation and statistical control," IEEE Trans. Industrial Electronics, vol. 55, no. 4, pp. 4260-269, December 2008.
22. R. Ricci and P. Pennacchi, "Diagnostics of gear faults based on EMD and automatic selection of intrinsic mode functions," Mechanical Systems and Signal Processing, vol. 25, no. 3, pp. 821-838, April 2011.
23. J.A. Rosero, L. Romeral, J.A Ortega and E. Rosero, "Short-circuit detection by means of empirical mode decomposition and Wigner-Ville distribution for PMSM running under dynamic condition," IEEE Trans. Industrial Electronics, vol. 56, no. 11, pp. 4534-4547, November 2009.
24. Q. Gao, C. Duan, H. Fan and Q. Meng, "Rotating machine fault diagnosis using empirical mode decomposition," Mechanical Systems and Signal Processing, vol. 22, no. 5, pp. 1072-1081, July 2008.
25. Y. Amirat, V. Choqueuse and M. E. H. Benbouzid, "Bearing fault detection in DFIG-based wind turbines using the first intrinsic mode function," in Proceedings of the 2010 ICEM, Rome (Italy), pp. 1-6, September 2010.
26. W. Yang, R. Court, PJ. Tavner and CJ. Crabtree, "Bivariate empirical mode decomposition and its contribution to wind turbine condition monitoring," Journal of Sound and Vibration, vol. 330, no. 15, pp. 3766-3782, July 2011.
27. X. Hu, S. Peng and W.-L. Hwang, "EMD revisited: A new understanding of the envelope and resolving the mode-mixing problem in AM-FM signals," IEEE Trans. Signal Processing, vol. 60, no. 3, pp. 1075-1086, March 2012.
28. Y. Lei, Z. He and Y. Zi, "Application of the EEMD method to rotor fault diagnosis of rotating machinery," Mechanical Systems and Signal Processing, Vol. 23, no 4, pp. 1327-1338, May 2009.
29. Z. H. Wu and N. E. Huang, "Ensemble empirical mode decomposition: A noise-assisted data analysis method", Advances in Adaptive Data Analysis, vol. 1, no. 1, pp. 1-41, 2009.